Mitotane liposomes for potential treatment of adrenal cortical carcinoma: ex vivo intestinal permeation and in vivo bioavailability.

The adrenal cortical carcinoma (ACC) treatment, for which mitotane (o,p'-DDD) is the drug of choice, still remains a challenge both because of the well-known solubility problems of the drug, and its serious side effects. Mitotane is currently administered as oral tablets. The loading of mitotane into nanocarriers has been suggested as a way to circumvent the low solubility of the drug and its limited oral bioavailability. In this work, we have developed liposomes containing mitotane to enhance its intestinal absorption and oral bioavailability. Liposomes were produced by spray-drying of a mixture of phospholipids and the developed formulation was optimized by studying the degree of crystallinity, spray-drying conditions, phospholipid/mitotane ratio, and influence of mannitol in the hydrating ethanolic solution. An optimal liposomal formulation was produced with a phospholipid:mitotane combination (3.34:1), exhibiting a mean hydrodynamic diameter around 1 µm and spherical shape. The produced mitotane liposomes were re-suspended by hydrating the spray-dried powders in a stirred tank, and tested their intestinal permeability (ex vivo) and relative bioavailability (in vivo), against a free drug solution (with or without Trigliceril®CM). Our results support the conclusion that the loading of mitotane in liposomes enhanced its intestinal absorption and relative bioavailability.

Evaluation of the Influence of Process Parameters on the Properties of Resveratrol-Loaded NLC Using 22 Full Factorial Design.

Resveratrol (RSV) is a natural antioxidant commonly found in grapes, berries, and nuts that has shown promising results in the treatment of a variety of degenerative and age-related diseases. Despite the proven beneficial results on reduction of reactive oxidant species (ROS) and on inflammatory process, RSV shows various limitations including low long-term stability, aqueous solubility, and bioavailability, restricting its applications in the medical-pharmaceutical area. To overcome these limitations, it has been applied in pharmaceutical formulations as nanostructured lipid carriers (NLC). Thus, the present study focuses on the optimization of the production process of NLC. NLC was produced by high shear homogenization (HSH) and ultrasound method (US) using Compritol® ATO C888 as solid lipid and Miglyol 812® as liquid lipid. In order to obtain an optimized formulation, we used a 22 full factorial design with triplicate of central point investigating the effects of the production process parameters; shear intensity and homogenization time, on the mean particle size (PS) and polydispersity index (PDI). Instability index, encapsulation efficiency, and production yield were also evaluated. As the PS and PDI values obtained with 6 min of shear at 19,000 rpm and 10 min of shear and 24,000 rpm were similar, the instability index (<0.1) was also used to select the optimal parameters. Based on the results of the experimental design and instability index, it was concluded that the shear rate of 19,000 rpm and the shear time of 6 min are the optimal parameters for RSV-loaded NLC production. Factorial design contributed therefore to optimize the variables of the NLC production process from a small number of experiments.

3D Printed Cartilage-Like Tissue Constructs with Spatially Controlled Mechanical Properties.

Developing biomimetic cartilaginous tissues that support locomotion while maintaining chondrogenic behavior is a major challenge in the tissue engineering field. Specifically, while locomotive forces demand tissues with strong mechanical properties, chondrogenesis requires a soft microenvironment. To address this challenge, 3D cartilage-like tissue is bioprinted using two biomaterials with different mechanical properties: a hard biomaterial to reflect the macromechanical properties of native cartilage, and a soft biomaterial to create a chondrogenic microenvironment. To this end, a hard biomaterial (MPa order compressive modulus) composed of an interpenetrating polymer network (IPN) of polyethylene glycol (PEG) and alginate hydrogel is developed as an extracellular matrix (ECM) with self-healing properties, but low diffusive capacity. Within this bath supplemented with thrombin, fibrinogen containing human mesenchymal stem cell (hMSC) spheroids is bioprinted forming fibrin, as the soft biomaterial (kPa order compressive modulus) to simulate cartilage's pericellular matrix and allow a fast diffusion of nutrients. The bioprinted hMSC spheroids improve viability and chondrogenic-like behavior without adversely affecting the macromechanical properties of the tissue. Therefore, the ability to print locally soft and cell stimulating microenvironments inside of a mechanically robust hydrogel is demonstrated, thereby uncoupling the micro- and macromechanical properties of the 3D printed tissues such as cartilage.

Recovery and Purity of High Molar Mass Bio-hyaluronic Acid Via Precipitation Strategies Modulated by pH and Sodium Chloride.

The effects of ethanol/broth proportions and the number of steps at varying pH in the presence or absence of sodium chloride (NaCl) were studied as precipitation strategies for the recovery and purification of high molar mass bio-hyaluronic acid (Bio-HA). Bio-HA was synthesized by Streptococcus zooepidemicus in a culture medium containing glucose and soy peptones. A single-step precipitation was more attractive than multistep precipitation in terms of recovery and purity as well as decreased use of ethanol. The best conditions in the absence and presence of salt were 2:1 ethanol/broth (v/v) at pH 4 (55.0 ± 0.2% purity and 85.0 ± 0.7% recovery) and 2:1 ethanol/broth (v/v) at pH 7 + 2 mol L-1 NaCl (59.0 ± 0.9% purity and 82.0 ± 4.3% recovery). Dynamic light scattering (DLS) spectra showed different particle sizes as a consequence of the changes in the molecular structure of HA, mainly with changes in pH. Although slight changes in distribution were observed, the average HA molar mass was not affected by the precipitation strategy, remaining on the order of 105 Da. Therefore, pH and NaCl modulated the precipitation performance of HA. These findings are relevant to further optimizing the precipitation step, thus minimizing costs in the later stages of HA purification.

Solid lipid nanoparticles optimized by 22 factorial design for skin administration: Cytotoxicity in NIH3T3 fibroblasts.

The present study focuses on the characterization of the cytotoxic profile on NIH3T3 mouse embryonic fibroblasts of solid lipid nanoparticles (SLN) optimized by a 22 full factorial design for skin administration. To build up the surface response charts, a design of experiments (DoE) based on 2 independent variables was used to obtain an optimized formulation. The effect of the composition of lipid and water phases on the mean particle size (z-AVE), polydispersity index (PdI) and zeta potential (ZP) was studied. The developed formulations were composed of 5.0% of lipid phase (stearic acid (SA), behenic alcohol (BA) or a blend of SA:BA (1:1)) and 4.7% of surfactants (soybean phosphatidylcholine and poloxamer 407). In vitro cytotoxicity using NIH3T3 fibroblasts was performed by MTT reduction assay. This factorial design study has proven to be a useful tool in optimizing SLN (z-AVE ∼ 200 nm), which were shown to be non-cytotoxic. The present results highlight the benefit of applying statistical designs in the preparation and optimization of SLN formulations.

Skin Delivery and in Vitro Biological Evaluation of Trans-Resveratrol-Loaded Solid Lipid Nanoparticles for Skin Disorder Therapies.

The aim of this study was to evaluate the skin delivery and in vitro biological activity of trans-resveratrol (RES)-loaded solid lipid nanoparticles (SLNs). The SLNs were composed of stearic acid, poloxamer 407, soy phosphatidylcholine (SPC), an aqueous phase and 0.1% RES. The particle size, polydispersity index (PdI) and zeta potential were analyzed by dynamic light scattering (DLS). The SLNs were analyzed by scanning electron microscopy (SEM-FEG) and differential scanning calorimetry (DSC). In vitro RES-SLN skin permeation/retention assays were conducted, and their tyrosinase inhibitory activity was evaluated. An MTT reduction assay was performed on HaCat keratinocytes to determine in vitro cytotoxicity. The formulations had average diameter lower than 200 nm, the addition of SPC promoted increases in PdI in the RES-SLNs, but decreases PdI in the RES-free SLNs and the formulations exhibited zeta potentials smaller than -3 mV. The DSC analysis of the SLNs showed no endothermic peak attributable to RES. Microscopic analysis suggests that the materials formed had nanometric size distribution. Up to 45% of the RES permeated through the skin after 24 h. The RES-loaded SLNs were more effective than kojic acid at inhibiting tyrosinase and proved to be non-toxic in HaCat keratinocytes. The results suggest that the investigated RES-loaded SLNs have potential use in skin disorder therapies.

Fibrin network architectures in pure platelet-rich plasma as characterized by fiber radius and correlated with clotting time.

Fibrin networks are obtained through activation of platelet-rich plasma (PRP) for use in tissue regeneration. The importance of fibrin networks relies on mediation of release of growth factors, proliferation of tissue cells and rheological properties of the fibrin gels. Activation of PRP usually involves the decomposition of fibrinogen by agonists, in a wide range of concentrations. Therefore fibrin networks with a large structural diversity are formed, making comparative evaluations difficult. In order to standardize the fibrin networks, we used the statistical techniques central composite rotatable design and response-surface analysis, to correlate the radius of the fibers with the ratios between the agonists (autologous serum/calcium chloride) and agonist/PRP. From an individual and interactive analysis of the variables, architectures characterized by thick, medium and thin fibers were delineated on the response-surface. Furthermore, the architectures were correlated with coagulation time. This approach is valuable for standardizing the PRP preparation for clinical applications.

Hydrophilic coating of mitotane-loaded lipid nanoparticles: preliminary studies for mucosal adhesion.

The aim of the present work was to load mitotane, an effective drug for adrenocortical carcinoma treatment, in solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC). The SLN and NLC were successfully prepared by high shear homogenization followed by hot high pressure homogenization. Formulations were composed of cetyl palmitate as the solid lipid for SLN, whereas for NLC PEGylated stearic acid was selected as solid lipid and medium chain triacylglycerols as the liquid lipid. Tween® 80 and Span® 85 were used as surfactants for all formulations. The particle size, zeta potential, polydispersity index (PI), encapsulation efficiency (EE), and loading capacity (LC) were evaluated. The SLN showed a mean particle size of 150 nm, PI of 0.20, and surface charge -10 mV, and the EE and LC could reach up to 92.26% and 0.92%, respectively. The NLC were obtained with a mean particle size of 250 nm, PI of 0.30, zeta potential -15 mV and 84.50% EE, and 0.84% LC, respectively. Hydrophilic coating of SLN with chitosan or benzalkonium chloride was effective in changing zeta potential from negative to positive values. The results suggest that mitotane was efficiently loaded in SLN and in NLC, being potential delivery systems for improving mitotane LC and controlled drug release.

Elastic liposomes containing benzophenone-3 for sun protection factor enhancement.

This work was focused on the loading of benzophenone-3 in elastic liposomes composed of egg phosphatidylcholine and cholesterol, prepared by the Bangham method. Samples were characterized in terms of particle size, polydispersity index (PI), zeta potential, encapsulation efficiency and in vitro photoprotection properties. The extrusion of liposomes loading benzophenone-3 produced reduced-size (100 nm) elastic liposomes with a PI of 0.2. The active was loaded with a concentration of 20.34% (m/m) revealing changes in the ultraviolet properties after loading. On the basis of these results, it can be anticipated that liposomes are able to improve sun protector factor in vitro compared the free active.

Preparation of gastro-resistant pellets containing chitosan microspheres for improvement of oral didanosine bioavailability.

The purpose of this work was to introduce a new concept of coated pellets containing chitosan microspheres loaded with didadosine for oral administration, aiming at reducing the frequency of administration and improving the bioavailability by a suitable release profile. Chitosan microspheres were produced under fluidized bed, followed by extrusion and spheronization to obtain pellets with a mean diameter of about 1 mm. The pellets were then coated with Kollidon® VA64 and Kollicoat® MAE100P in water dispersion to depict a sustained release profile. Conventional hard gelatine capsules were loaded with these pellets and tested in vitro for their release profile of didadosine. Dissolution testing confirmed that chitosan microsphere pellets provides appropriate sustained release up to 2 h behavior for didanosine.

Polymorphism, crystallinity and hydrophilic-lipophilic balance of stearic acid and stearic acid-capric/caprylic triglyceride matrices for production of stable nanoparticles.

There is an increasing interest in lipid nanoparticles because of their suitability for several administration routes. Thus, it becomes even more relevant the physicochemical characterization of lipid materials with respect to their polymorphism, lipid miscibility and stability, as well as the assessment of the effect of surfactant on the type and structure of these nanoparticles. This work focuses on the physicochemical characterization of lipid matrices composed of pure stearic acid or of mixtures of stearic acid-capric/caprylic triglycerides, for drug delivery. The lipids were analyzed by Differential Scanning Calorimetry (DSC), Wide Angle X-ray Diffraction (WAXD), Polarized Light Microscopy (PLM) and hydrophilic-lipophilic balance (HLB) in combination with selected surfactants to determine the best solid-to-liquid ratio. Based on the results obtained by DSC and WAXD, the selected qualitative and quantitative composition contributed for the production of stable nanoparticles, since the melting and the tempering processes provided important information on the thermodynamic stability of solid lipid matrices. The best HLB value obtained for stearic acid-capric/caprylic triglycerides was 13.8, achieved after combining these lipids with accepted surfactants (trioleate sorbitan and polysorbate 80 in the ratio of 10:90). The proposed combinations were shown useful to obtain a stable emulsion to be used as intermediate form for the production of lipid nanoparticles.

Retinyl palmitate flexible polymeric nanocapsules: characterization and permeation studies.

Polymeric nanocapsules with elastic characteristics were prepared by the pre-formed polymer interfacial deposition method. The system consists of an oily core of retinyl palmitate with Span 60 and a polymeric wall of poly(D,L-lactide) (PLA). A narrow size distribution (215 nm, P.D.I. 0.10) was showed by dynamic light scattering (DLS) analyses. Particle deformability was observed by transmission electron microscopy (TEM) images and permeation of the particles through two superposed membranes of smaller pore diameters. Permeation studies were achieved using plastic surgery abdominal human skin by Franz diffusion cell. Retinyl palmitate permeates into deep skin layers. Besides, a PLA fluorescent derivative conjugated with Nile blue dye by an amide covalent bound was additionally obtained. Permeation profile of the nanocapsules with the fluorescent polymer was evaluated by confocal laser scanning microscopy (CLSM). The CLSM showed that nanocapsules were distributed uniformly, suggesting that the permeation mechanism through skin is intercellular. Thus, the use of these nanocapsules may be a feasible strategy to enhance the permeation of actives into the skin when delivery to deep layers is aimed.

Microbial production of hyaluronic acid from agricultural resource derivatives.

Agricultural resource derivatives (ARDs) such as hydrolysate soy protein concentrate (HSPC), whey protein concentrate (WPC), and cashew apple juice (CAJ) were studied with focus on the production of hyaluronic acid (HA) by Streptococcus zooepidemicus. Supplementation of the media with corn steep liquor (CSL) was also evaluated. Synthetic medium containing glucose and yeast extract was used as control. CAJ was a promising medium for the production of HA. It produced the highest amount of HA (0.89 g L(-1)), similar to that of the control (0.86 g L(-1)). WPC and HSPC media were the most effective for the production of biomass. CSL did not influence the production of HA when HSPC and WPC were used. However, in the synthetic medium it doubled the yield of HA from glucose. The average molecular weight of HA ranged from 10(3) to 10(4)Da for the ARDs and 10(7)Da for the synthetic medium.

Protection against tuberculosis by a single intranasal administration of DNA-hsp65 vaccine complexed with cationic liposomes.

BACKGROUND: The greatest challenges in vaccine development include optimization of DNA vaccines for use in humans, creation of effective single-dose vaccines, development of delivery systems that do not involve live viruses, and the identification of effective new adjuvants. Herein, we describe a novel, simple technique for efficiently vaccinating mice against tuberculosis (TB). Our technique consists of a single-dose, genetic vaccine formulation of DNA-hsp65 complexed with cationic liposomes and administered intranasally. RESULTS: We developed a novel and non-toxic formulation of cationic liposomes, in which the DNA-hsp65 vaccine was entrapped (ENTR-hsp65) or complexed (COMP-hsp65), and used to immunize mice by intramuscular or intranasal routes. Although both liposome formulations induced a typical Th1 pattern of immune response, the intramuscular route of delivery did not reduce the number of bacilli. However, a single intranasal immunization with COMP-hsp65, carrying as few as 25 microg of plasmid DNA, leads to a remarkable reduction of the amount of bacilli in lungs. These effects were accompanied by increasing levels of IFN-gamma and lung parenchyma preservation, results similar to those found in mice vaccinated intramuscularly four times with naked DNA-hsp65 (total of 400 microg). CONCLUSION: Our objective was to overcome the significant obstacles currently facing DNA vaccine development. Our results in the mouse TB model showed that a single intranasal dose of COMP-hsp65 elicited a cellular immune response that was as strong as that induced by four intramuscular doses of naked-DNA. This formulation allowed a 16-fold reduction in the amount of DNA administered. Moreover, we demonstrated that this vaccine is safe, biocompatible, stable, and easily manufactured at a low cost. We believe that this strategy can be applied to human vaccines to TB in a single dose or in prime-boost protocols, leading to a tremendous impact on the control of this infectious disease.

Fungi allergens produced by solid-state fermentation process: optimization and allergen characterization.

Allergenic extracts were produced from Drechslera (Helminthosporium) monoceras biomass cultured by solid-state fermentation using wheat bran as the substrate. The main fermentation variables were selected by statistical design, and the optimized biomass yield (1.43 mg/[g of dry substrate d]) was obtained at pH 9.5 and 45.8% moisture. The allergenic extracts were produced from crude extract by protein precipitation and polyphenol removal. Proteins in the range of 16-160 kDa were identified in the extracts. Their reactions in patients were characterized by in vivo cutaneous tests (positive in 40% of the atopic patients) and by dot-blotting assays.