Benefits of skin application of piceatannol-A minireview.

The skin is the largest organ of the human body and has several functions such as barrier against external agents, the maintenance of temperature and homeostatic functions. Skin ageing is a natural process that can be influenced by environmental factors, intrinsic skin factors and lifestyle. UV light plays an important role in skin ageing and can cause spots, requiring the use of depigmenting agents. Nowadays, there is a great demand for ingredients that prevent skin ageing, with natural agents occupying a promising position. Among the natural agents, polyphenols, such as resveratrol and piceatannol, found in grapes, passion fruits and other fruits, have a huge relevance. Great benefits of piceatannol have been reported, so thus, this work focuses specifically on a review of the literature regarding the application of this polyphenol in skin care products. This polyphenol can be used in a wound-healing, or as anti-ageing, antioxidant, anti-acne and skin whitening, among other effects.

Design and characterization of Nanostructured lipid carriers (NLC) and Nanostructured lipid carrier-based hydrogels containing Passiflora edulis seeds oil.

This study aims to design and characterize Nanostructured lipid carriers (NLC) and Nanostructured lipid carrier-based hydrogels with Passiflora edulis seeds oil, a by-product from Madeira Island food industry. NLC were prepared by the ultrasonication technique, using passion fruit seeds oil as a liquid lipid and glyceryl distearate as a solid lipid. These NLC were then gelled with Poly (acrylic acid). Long-term stability studies were conducted with NLC and NLC-based hydrogels stored for 12 months. The following tests were performed: morphology, encapsulation efficiency, particle size analysis, polydispersity index analysis, zeta potential, pH measurement, color analysis, viscosity studies, texture analysis, in vitro occlusion test, ex vivo skin penetration study, tyrosinase inhibition activity, in vitro skin permeation experiments and in vitro cytotoxicity studies. The developed NLC had spherical shape and narrow particle sizes distribution with mean sizes in the range of 150 nm and PDI below 0.3, Zeta potential values around -30 mV and high Encapsulation efficiency. The tyrosinase inhibitory activity and skin retention of the nanoparticles was superior to that of the non-encapsulated oil. The developed formulations did not show cytotoxicity towards HaCat cells and presented suitable viscosity and texture properties for skin application, proving to be good candidates as depigmenting agent.

Identification and Quantification of Stilbenes (Piceatannol and Resveratrol) in Passiflora edulis By-Products.

Recently, studies on the by-products from the food industry, such as passion fruit seeds, have significantly increased, as these can have an added value, due to their properties, such as potential antioxidant activity. This study was conducted to determine the presence of piceatannol and resveratrol in various extracts of passion fruit (Passiflora edulis) seeds from Madeira Island and a commercial passion fruit oil was used as reference. The commercial oil and the extracts that were obtained by traditional Soxhlet method with ethanol and acetone did not reveal the presence of the two stilbenes, piceatannol and resveratrol. However, the extracts that were obtained by the ultrasound method showed significant amounts of piceatannol and resveratrol when compared with the commercial oil. The presence of these compounds indicates that this oil could have potential application in cosmetic and pharmaceutical industries, due to their proven antioxidant and anti-aging properties.

Characterization and stability studies of emulsion systems containing pumice

Emulsions are the most common form of skin care products. However, these systems may exhibit some instability. Therefore, when developing emulsions for topical application it is interesting to verify whether they have suitable physical and mechanical characteristics and further assess their stability. The aim of this work was to study the stability of emulsion systems, which varied in the proportion of the emulsifying agent cetearyl alcohol (and) sodium lauryl sulfate (and) sodium cetearyl sulfate (LSX), the nature of the oily phase (decyl oleate, cyclomethicone or dimethicone) and the presence or absence of pumice (5% w/w). While maintaining the samples at room temperature, rheology studies, texture analysis and microscopic observation of formulations with and without pumice were performed. Samples were also submitted to an accelerated stability study by centrifugation and to a thermal stress test. Through the testing, it was found that the amount of emulsifying agent affects the consistency and textural properties such as firmness and adhesiveness. So, formulations containing LSX (5% w/w) and decyl oleate or dimethicone as oily phase had a better consistency and remained stable with time, so exhibited the best features to be used for skin care products.

Emulsões são a forma de apresentação mais comum dos produtos para aplicação na pele. No entanto estes sistemas podem exibir alguma instabilidade. Por esta razão, quando do desenvolvimento de emulsões para aplicação tópica é importante verificar se estas apresentam propriedades físicas ou mecânicas adequadas e avaliar a sua estabilidade. O objetivo deste trabalho consistiu no estudo da estabilidade de emulsões, cujas variações entre elas foi a proporção de agente emulsificante álcool estearílico (mais) laurilsulfato de sódio (mais) estearilsulfato de sódio (LSX), a natureza da fase oleosa (decil oleato, ciclometicona ou dimeticona) e a presença ou ausência de pedra-pomes (5% m/m). Mantendo as amostras à mesma temperatura, realizaram-se o estudo da reologia, a análise de textura e observação microscópica das formulações com e sem pedra-pomes. Amostras foram, também, submetidas a estudo de estabilidade acelerada por centrifugação e a ensaio de estresse térmico. Através dos testes realizados, constatou-se que a quantidade de agente emulsificante influencia a consistência e as propriedades de textura, como a firmeza e a adesividade. As formulações contendo LSX (5% m/m) e decil oleato ou dimeticona como fase oleosa exibiram melhores caraterísticas como produtos para aplicação na pele, uma vez que estas formulações apresentaram menor firmeza e consistência e permaneceram estáveis com o tempo.

Influence of taro (Colocasia esculenta L. Shott) growth conditions on the phenolic composition and biological properties.

Colocasia esculenta (L.) Shott, commonly known as taro, is an essential food for millions of people. The leaves are consumed in sauces, purees, stews, and soups, being also used in wound healing treatment. Nowadays, the consumers' demand for bioactive compounds from the diet led to the development of new agricultural strategies for the production of health-promoting constituents in vegetables. In this work, two strategies (variety choice and irrigation conditions) were considered in the cultivation of C. esculenta. The effect on the phenolic composition of the leaves was evaluated. Furthermore, a correlation between the biological activity of the different varieties and their chemical composition was established. Qualitative and quantitative differences in the phenolic composition were observed between varieties; furthermore, the irrigation conditions also influenced the composition. C. esculenta varieties were able to scavenge several oxidant species and to inhibit hyaluronidase, but data suggest that metabolites other than phenolics are involved. The results show that cultivation strategies can effectively modulate the accumulation of these types of bioactive compounds. Furthermore C. esculenta wound healing potential can be attributed, at least in part, to the protection of the wound site against oxidative/nitrosative damage and prevention of hyaluronic acid degradation.

Further knowledge on the phenolic profile of Colocasia esculenta (L.) Shott.

Colocasia esculenta (L.) Shott, commonly called taro, is an ancient species selected for its edible tuber. Its huge "elephant ear" like leaves are also consumed in sauces and stews or as soups. Forty-one phenolic metabolites (11 hydroxycinnamic acid derivatives and 30 glycosylated flavonoids) were identified by high-performance liquid chromatography-diode array detection-electrospray ionization/mass spectrometry (HPLC-DAD-ESI/MS(n)) in the leaves of two C. esculenta varieties cultivated in Azores Islands. To our knowledge, 34 of the 41 phenolic compounds are being reported for the first time in this species. Phenolics quantification was achieved by an HPLC-DAD accurate and sensitive validated method. Although the qualitative profile of the two varieties is quite similar, quantitative differences were observed between them. "Giant white" and "red" varieties (local denomination) contain, respectively, ca. 14 and 21% of phenolic acids, 37 and 28% of flavones mono-C-glycosides, 42 and 43% of flavones di-C-glycosides, 3 and 4% of flavones mono-C-(O-glycosyl)glycosides, and both of them ca. 2% of flavones di-C-(O-glycosyl)glycosides and 2% of flavones-O-glycosides. Luteolin-6-C-hexoside was the compound present in higher amounts in both varieties. The established phenolic profile is an added value for the authenticity and quality control of C. esculenta and may be useful in the discrimination of its varieties.

Bioinspired imprinted PHEMA-hydrogels for ocular delivery of carbonic anhydrase inhibitor drugs.

Hydrogels with high affinity for carbonic anhydrase (CA) inhibitor drugs have been designed trying to mimic the active site of the physiological metallo-enzyme receptor. Using hydroxyethyl methacrylate (HEMA) as the backbone component, zinc methacrylate, 1- or 4-vinylimidazole (1VI or 4VI), and N-hydroxyethyl acrylamide (HEAA) were combined at different ratios to reproduce in the hydrogels the cone-shaped cavity of the CA, which contains a Zn(2+) ion coordinated to three histidine residues. 4VI resembles histidine functionality better than 1VI, and, consequently, pHEMA-ZnMA(2) hydrogels bearing 4VI moieties were those with the greatest ability to host acetazolamide or ethoxzolamide (2 to 3 times greater network/water partition coefficient) and to sustain the release of these antiglaucoma drugs (50% lower release rate estimated by fitting to the square root kinetics). The use of acetazolamide as template during polymerization did not enhance the affinity of the network for the drugs. In addition to the remarkable improvement in the performance as controlled release systems, the biomimetic hydrogels were highly cytocompatible and possessed adequate oxygen permeability to be used as medicated soft contact lenses or inserts. The results obtained highlight the benefits of mimicking the structure of the physiological receptors for the design of advanced drug delivery systems.

Combining strategies to optimize a gel formulation containing miconazole: the influence of modified cyclodextrin on textural properties and drug release.

BACKGROUND: Miconazol, an antimycotic drug, is commonly formulated into semisolid formulations designed to be applied in the oral cavity to treat oral candidiasis. However, given its limited aqueous solubility, permeation through the biological membranes is low and therefore its activity is also limited. Cyclodextrins (CDs) have been widely used to increase the solubility and stability of poorly water-soluble drugs. AIM: The aim of this study is to formulate a gel containing an inclusion complex between a modified CD, methyl-beta-cyclodextrin (MbetaCD), and miconazole (MCZ). The influence of the CD on the textural properties of the prepared gel and the drug release from formulation were evaluated. METHODS: The gels were prepared using two polymers, Carbopol 71G and Pluronic F127, which were selected taking into account their bioadhesiveness and thermal-sensitive gelling properties, respectively. Texture profile analyses were performed at two different temperatures to ascertain the influence of the temperature on the gel texture properties. The in vitro MCZ release profiles from the prepared gel and the commercial gel formulations were evaluated and compared using modified Franz diffusion cells. RESULTS: The addition of MbetaCD to the gel resulted in a decrease of the gel adhesiveness and firmness, and the MCZ release profile through f1 and f2 proved to be similar to the commercial product. CONCLUSIONS: A gel comprising miconazol in the form of an inclusion complex with MbetaCD showed suitable textural properties to be applied to the buccal mucosa. The MbetaCD enhanced the solubility of the MCZ in the gel formulation resulting in adequate in vitro drug release profiles.

Preparation and solid-state characterization of inclusion complexes formed between miconazole and methyl-beta-cyclodextrin.

The aim of this study is to confirm the formation of inclusion complexes between miconazole (MCZ) and two derivatives of beta-cyclodextrin, methyl-beta-cyclodextrin (MbetaCD) and 2-hydroxypropyl-beta-cyclodextrin (HPbetaCD) in aqueous solution by phase solubility studies. Inclusion complexes with MbetaCD in the solid state were then prepared by different methods, i.e., kneading, coevaporation (COE), spray-drying (SD), and lyophilization (LPh). The physicochemical properties of these complexes were subsequently studied by means of differential scanning calorimetry, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction techniques. Phase solubility diagrams with MbetaCD and HPbetaCD were classified as A(P) type, indicating the formation of 1:1 and 1:2 stoichiometric inclusion complexes. The apparent stability constants (K(S)) calculated from the phase solubility diagram were 145.69 M(-1) (K(1:1)) and 11.11 M(-1) (K(1:2)) for MbetaCD and 126.94 M(-1) (K(1:1)) and 2.20 M(-1) (K(1:2)) for HPbetaCD. The method of preparation of the inclusion complexes in the solid state was shown to greatly affect the properties of the formed complex. Hence, the LPh, SD, and COE methods produce true inclusion complexes between MCZ and MbetaCD. In contrast, crystalline drug was still clearly detectable in the kneaded (KN) product.

Module assemblage technology for floating systems: in vitro flotation and in vivo gastro-retention.

The aim of this research was to study, in vitro by resultant-weight measurement and in vivo by gamma-scintigraphy experiments in humans, the floatation behavior of systems obtained by modules assembled in void configuration. The assembled system technology allowed the manufacturing of a system characterized by the presence of an internal void space that provided an apparent density lower than water. The gastro-retention times of floating assembled systems were determined in comparison with non-floating systems having the same mass and composition. In vitro the floatation of the system started immediately after immersion in water and lasted for more than 5 h. The in vivo studies confirmed that the in vitro floating ability of void configuration was maintained also in the human stomach where the system stayed for periods of time ranging from 2.5 to 5.0 h, depending on the food regimen and the sex of the subject. Reiterate eating and drinking further prolonged the stomach residence time.

Sistemas farmacêuticos gastrorretentivos flutuantes / Pharmaceutical gastro-retentive systems

Freqüentemente recorre-se à produção de sistemas gastrorretentivos para modular a liberação de fármacos a partir de sistemas farmacêuticos com vistas ao aumento do tempo de permanência do fármaco no trato gastrointestinal. Umas das estratégias mais interessantes passa pela produção de sistemas flutuantes. Estes podem ser classificados em dois grupos: sistemas flutuantes efervescentes e sistemas flutuantes não-efervecentes. Neste artigo apresenta-se uma revisão bibliográfica do que tem sido produzido nesta área nos últimos anos.

Gastro-retentive systems are often produced in order to modulate drugs release from pharmaceutical forms and in this way to increase drug residence time in the gastrointestinal tract. One of the most interesting strategies consists in the preparation of floating devices. These can be classified into two groups: effervescent systems and non-effervescent systems. A review of what has been done in the last years is presented in this article.

Preparações radiofarmacêuticas e suas aplicações / Radiopharmaceuticals and applications

Os radiofármacos são compostos, sem ação farmacológica, que têm na sua composição um radionuclídeo e são utilizados em Medicina Nuclear para diagnóstico e terapia de várias doenças. Para aplicações de diagnóstico em Medicina Nuclear utilizam-se radiofármacos que apresentam na sua constituição radionuclídeos emissores de radiação g ou emissores de pósitrons (b+), já que o decaimento destes radionuclídeos dá origem a radiação eletromagnética penetrante, que consegue atravessar os tecidos e pode ser detectada externamente. Os radiofármacos para terapia devem incluir na sua composição um radionuclídeo emissor de partículas ionizantes (a , b- ou elétrons Auger), pois a sua ação se baseia na destruição seletiva de tecidos. Existem dois métodos tomográficos para aquisição de imagens em Medicina Nuclear: o SPECT (Tomografia Computarizada de Emissão de Fóton Único), que utiliza radionuclídeos emissores g (99mTc, 123I, 67Ga, 201Tl) e o PET (Tomografia por Emissão de Pósitrons), que usa radionuclídeos emissores de pósitrons ( 11C, 13N, 15O, 18F). Os radiofármacos podem ser classificados em radiofármacos de perfusão (ou 1ª geração) e radiofármacos específicos (ou 2ª geração). Os radiofármacos de perfusão são transportados no sangue e atingem o órgão alvo na proporção do fluxo sanguíneo. Os radiofármacos ditos específicos contêm molécula biologicamente ativa, que se liga a receptores celulares e que deve manter a sua bioespecificidade mesmo após ligação ao radionuclídeo. Assim, nestes radiofármacos, a fixação em tecidos ou órgãos é determinada pela capacidade da biomolécula de reconhecer receptores presentes nessas estruturas biológicas. As preparações radiofarmacêuticas são obtidas prontas para uso, em kits frios ou em preparações autólogas. De acordo com o tipo de preparação, existe um processo de controle de qualidade próprio. A maior parte dos radiofármacos em uso clínico corresponde a agentes de perfusão...

Radiopharmaceuticals are substances without pharmacological activity that are used in Nuclear Medicine for diagnosis and therapy for several diseases. Diagnosis radiopharmaceuticals generally emit g radiation or positrons (b+), because their decay originates penetrating electromagnetic radiation that can cross the tissues and be externally detected. Therapeutic radiopharmaceuticals must include in their composition ionized particles emission nucleus (a, b- or Auger electrons), since their action is based in selective tissue destruction. There are two main methods for image acquisition: SPECT (Single Photon Emission Computerized Tomography) that uses g emission radionuclides (99mTc, 123I, 67Ga, 201Tl) and PET (Positron Emission Tomography) that uses positron emission radionuclides like 11C, 13N, 15O, 18F. Radiopharmaceuticals can be classified into perfusion radiopharmaceuticals (first generation) or specific radiopharmaceuticals (second generation). Perfusion radiopharmaceuticals are transported in the blood e reach the target organ in the direct proportion of the blood stream. Specific radiopharmaceuticals contain a biologically active molecule that binds to cellular receptors that must remain biospecific after binding to the radiopharmaceutical. For this type of radiopharmaceuticals, tissue or organ uptake is determined by the biomolecule capacity of recognizing receptors in those biological structures. Radiopharmaceuticals are produced ready to use, in cold kits or in autologal preparations. According to the preparation type there is a different quality control procedure. Most of the radiopharmaceuticals used nowadays are of the perfusion type. Research focus in the development of specific radiopharmaceuticals that can provide information, at the molecular level, of biochemical alterations associated to different pathologies...