Trunk Injection of Citrus Trees with a Polymeric Nanobactericide Reduces Huanglongbing Severity Caused by Candidatus Liberibacter asiaticus.

Huanglongbing (HLB) is a disease caused by the phloem- limited Candidatus Liberibacter asiaticus (CLas) that affects the citrus industry worldwide. To date, only indirect strategies have been implemented to eradicate HLB. Included among these is the population control of the psyllid vector (Diaphorina citri), which usually provides inconsistent results. Even though strategies for direct CLas suppression seem a priori more promising, only a handful of reports have been focused on a confrontation of the pathogen. Recent developments in polymer chemistry have allowed the design of polycationic self-assembled block copolymers with outstanding antibacterial capabilities. Here, we report the use of polymeric nano-sized bactericide particles (PNB) to control CLas directly in the phloem vasculature. The field experiments were performed in Rioverde, San Luis Potosí, and is one of the most important citrusproducing regions in Mexico. An average 52% reduction in the bacterial population was produced when PNB was injected directly into the trunk of 20 infected trees, although, in some cases, reduction levels reached 97%. These results position PNB as a novel and promising nanotechnological tool for citrus crop protection against CLas and other related pathogens.

Contrasting the stability, octahedral distortions, and optoelectronic properties of 3D MABX3 and 2D (BA)2(MA)B2X7 (B = Ge, Sn, Pb; X = Cl, Br, I) perovskites.

Efficient surface passivation and toxic lead (Pb) are known obstacles to the photovoltaic application of perovskite-based solar cells. A possible solution for these problems is to use thin-films of two-dimensional (2D) perovskite-based materials and the replacement of Pb with alternative divalent cations (B); however, our atomistic understanding of the differences between (3D) three-dimensional and 2D perovskite-based materials is far from satisfactory. Herein, we report a systematic theoretical investigation based on ab initio density functional theory (DFT) calculations for both 3D MABX3 and the Ruddlesden-Popper 2D (BA)2(MA)B2X7 (B = Ge, Sn, Pb, and X = Cl, Br, I) compounds to investigate the differences (contrasts) in selected physical-chemical properties, i.e., structural parameters, energetic stability, electronic, and optical properties. We found an increased cation/anion charge separation because of the presence of organic spacers, which results in stronger Coulomb interactions in the inorganic framework, and hence, it enhances the cohesive energy (stability) within the inorganic layer. The inorganic layer constitutes the optically active region that contributes to the superior performance of perovskite-based solar cells. We quantified this effect by comparing the average electronic charges at the X sites in both 2D and 3D perovskites. This comparison is then correlated with variations in BX6-octahedron volumes, resulting in a monotonic relation. Moreover, the electronic structure characterization demonstrates that Ge-based systems present weakly sensitive band gaps to dimensionality due to a compensatory effect between Jahn-Teller distortions and quantum confinement. Lead-free GeI-, SnBr-, and SnI-based perovskites have DFT band gaps closer to the optimal value used in photovoltaic applications. Finally, as expected, the 2D systems absorption coefficients show pronounced anisotropy.

All-Aqueous, Surfactant-Free, and pH-Driven Nanoformulation Methods of Dual-Responsive Polymer Nanoparticles and their Potential use as Nanocarriers of pH-Sensitive Drugs.

All-aqueous, surfactant-free, and pH-driven nanoformulation methods to generate pH- and temperature-responsive polymer nanoparticles (NPs) are described. Copolymers comprising a poly(methyl methacrylate) (PMMA) backbone with a few units of 2-(dimethylamino)ethyl methacrylate (DMAEMA) are solubilized in acidic buffer (pH 2.0) to produce pH-sensitive NPs. Copolymers of different molar mass (2.3-11.5 kg mol-1 ) and DMAEMA composition (7.3-14.2 mol%) are evaluated using a "conventional" pH-driven nanoformulation method (i.e., adding an aqueous polymer solution (acidic buffer) into an aqueous non-solvent (basic buffer)) and a robotized method for pH adjustment of polymer dispersions. Dynamic light scattering, zeta-potential (ζ), and sedimentation-diffusion analyses suggest the formation of dual-responsive NPs of tunable size (from 20 to 110 nm) being stable for at least 28 days in the pH and temperature intervals from 2.0 to 6.0 and 25 to 50 °C, respectively. Ultraviolet-visible spectroscopic experiments show that these NPs can act as nanocarriers for the pH-sensitive dipyridamole drug, expanding its bioavailability and potential controlled release as a function of pH and temperature. These approaches offer alternative strategies to prepare stimuli-responsive NPs, avoiding the use of harmful solvents and complex purification steps, and improving the availability of biocompatible polymer nanoformulations for specific controlled release of pH-sensitive cargos.

Development of Photocurable Polyacrylate-Based PolyHIPEs and the Study of the Kinetics of Photopolymerization, and of Their Thermal, Mechanical and Hydrocarbon Absorption Properties.

This article describes a comprehensive study to obtain polymeric porous materials via a photopolymerization technique, using acrylate-based high internal phase emulsions (HIPEs), as a template. The aim of obtaining these polymers was to use them as hydrocarbon absorbing materials. Kinetics of photopolymerization of the acrylate monomers and of the HIPEs were conducted to optimize the process. The obtained monoliths were characterized by thermal analysis such as differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The morphology and surface area were analyzed by scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) analysis. The compression properties of the materials were determined, as well as their absorption properties of hydrocarbons such as hexane, diesel, toluene and chloroform. The findings show that the acrylate-HIPEs displayed high reactivity photopolymerizing in 20 min. The glass transition temperature of the materials were in the range of 2 to 83 °C, depending on the ratio of acrylates in the photocurable formulation, displaying the characteristic morphology with voids and interconnecting windows. The polyHIPEs exhibited superior properties of absorption of the studied hydrocarbons. The order of capability of absorption was chloroform > toluene > hexane > diesel. The optimum absorbing material was that with trimethylolpropane triacrylate, ethylhexyl acrylate and isobornyl acrylate in a 1:0.9:2.1 ratio, which absorbed 778% of chloroform, 378% of toluene, 306 % of hexane and 236% of diesel.

Exogenous Application of Polycationic Nanobactericide on Tomato Plants Reduces the Candidatus Liberibacter Solanacearum Infection.

Candidatus Liberibacter solanacearum (CaLso) is associated with diseases in tomato crops and transmitted by the tomato psyllid Bactericera cockerelli. A polymeric water-dispersible nanobactericide (PNB) was evaluated against CaLso as a different alternative. PNB is a well-defined polycationic diblock copolymer designed to permeate into the vascular system of plants. Its assessment under greenhouse conditions was carried out with tomato plants previously infected with CaLso. Using a concentration as low as 1.0 mg L-1, a small but significant reduction in the bacterial load was observed by real-time qPCR. Thus, to achieve an ecologically friendly dosage and set an optimum treatment protocol, we performed experiments to determine the effective concentration of PNB to reduce ~65% of the initial bacterial load. In a first bioassay, a 40- or 70-fold increase was used to reach that objective. At this concentration level, other bioassays were explored to determine the effect as a function of time. Surprisingly, a real reduction in the symptoms was observed after three weeks, and there was a significant decrease in the bacterial load level (~98%) compared to the untreated control plants. During this period, flowering and formation of tomato fruits were observed in plants treated with PNB.

Improving Recycled Poly(lactic Acid) Biopolymer Properties by Chain Extension Using Block Copolymers Synthesized by Nitroxide-Mediated Polymerization (NMP).

The aim of this contribution is to assess the use poly(styrene-co-glycidyl methacrylate-b-styrene) copolymers synthesized by nitroxide mediated polymerization (NMP) as chain extenders in the recycling of poly(lactic acid) biopolyester. Concisely, the addition of such block copolymers during the melt processing of recycled poly(lactic acid) (rPLA) leads to important increases in the viscosity average molecular weight of modified polymeric materials. Molar masses increase from 31,000 g/mol for rPLA to 48,000 g mol-1 for the resulting rPLA/copolymer blends (bPLA). Fortuitously, this last value is nearly the same as the one for pristine PLA, which constitutes a first piece of evidence of the molar mass increase of the recycled biopolymer. Thermograms of chain extended rPLA show significant decreases in cold crystallization temperature and higher crystallinity degrees due to the chain extension process using NMP-synthesized copolymers. It was found that increasing epoxide content in the NMP-synthesized copolymers leads to increased degrees of crystallinity and lower cold crystallization temperatures. The rheological appraisal has shown that the addition of NMP synthesized copolymers markedly increases complex viscosity and elastic modulus of rPLA. Our results indicate that P(S-co-GMA)-b-S) copolymers act as efficient chain extenders of rPLA, likely due to the reaction between the epoxy groups present in P(S-co-GMA)-b-PS and the carboxyl acid groups present in rPLA. This reaction positively affects viscometric molar mass of PLA and its performance.

On the adsorption mechanism of caffeine on MAPbI3 perovskite surfaces: a combined UMC-DFT study.

Recently, it was experimentally shown that the performance and thermal stability of the perovskite MAPbI3 were improved upon the adsorption of a molecular layer of caffeine. In this work, we used a hybrid methodology that combines uncoupled monte carlo (UMC) and density functional theory (DFT) simulations to carry out a detailed and comprehensive study of the adsorption mechanism of a caffeine molecule on the surface of MAPbI3. Our results showed that the adsorption distance and energy of a caffeine molecule on the MAPbI3 surface are 2.0 Å and -0.3 eV, respectively. The caffeine/MAPbI3 complex presents a direct bandgap of 2.38 eV with two flat intragap bands distanced 1.15 and 2.18 eV from the top of valence bands. Although the energy band levels are not significantly shifted by the presence of caffeine, the interaction MAPbI3/perovskite is enough to affect the bands' dispersion, particularly the conduction bands.

Unusual presentations of cardiac rupture during COVID-19 pandemic.

The Covid-19 pandemia has many other undesirable consequences apart of virus infection. Less people is hospitalized due to acute coronary syndrome and the delay to seek medical attention has increased. Patients with ST segment elevation myocardial infarction arrive at the hospital too late to be timely treated and we have recently seen mechanical complications that were more frequent in the past decades before the use of reperfusion strategies. In this report we describe the presentation, evolution and detailed imaging evaluation of two patients with unusual presentations of cardiac rupture: left ventricular pseudoaneurysm and left ventricular intramyocardial dissecting hematoma.

Tuning magnetic properties of penta-graphene bilayers through doping with boron, nitrogen, and oxygen.

Penta-graphene (PG) is a carbon allotrope that has recently attracted the attention of the materials science community due to its interesting properties for renewable energy applications. Although unstable in its pure form, it has been shown that functionalization may stabilize its structure. A question that arises is whether its outstanding electronic properties could also be further improved using such a procedure. As PG bilayers present both sp[Formula: see text] and sp[Formula: see text] carbon planes, it consists of a flexible candidate for functionalization tuning of electromagnetic properties. In this work, we perform density functional theory calculations to investigate how the electronic and structural properties of PG bilayers can be tuned as a result of substitutional doping. Specifically, we observed the emergence of different magnetic properties when boron and nitrogen were used as dopant species. On the other hand, in the case of doping with oxygen, the rupture of bonds in the sp[Formula: see text] planes has not induced a magnetic moment in the material.

Tuning Penta-Graphene Electronic Properties Through Engineered Line Defects.

Penta-graphene is a quasi-two-dimensional carbon allotrope consisting of a pentagonal lattice in which both sp2 and sp3-like carbons are present. Unlike graphene, penta-graphene exhibits a non-zero bandgap, which opens the possibility of its use in optoelectronic applications. However, as the observed bandgap is large, gap tuning strategies such as doping are required. In this work, density functional theory calculations are used to determine the effects of the different number of line defects of substitutional nitrogen or silicon atoms on the penta-graphene electronic behavior. Our results show that this doping can induce semiconductor, semimetallic, or metallic behavior depending on the doping atom and targeted hybridization (sp2 or sp3-like carbons). In particular, we observed that nitrogen doping of sp2-like carbons atoms can produce a bandgap modulation between semimetallic and semiconductor behavior. These results show that engineering line defects can be an effective way to tune penta-graphene electronic behavior.

Combinations of Antimicrobial Polymers with Nanomaterials and Bioactives to Improve Biocidal Therapies.

The rise of antibiotic-resistant microorganisms has become a critical issue in recent years and has promoted substantial research efforts directed to the development of more effective antimicrobial therapies utilizing different bactericidal mechanisms to neutralize infectious diseases. Modern approaches employ at least two mixed bioactive agents to enhance bactericidal effects. However, the combinations of drugs may not always show a synergistic effect, and further, could also produce adverse effects or stimulate negative outcomes. Therefore, investigations providing insights into the effective utilization of combinations of biocidal agents are of great interest. Sometimes, combination therapy is needed to avoid resistance development in difficult-to-treat infections or biofilm-associated infections treated with common biocides. Thus, this contribution reviews the literature reports discussing the usage of antimicrobial polymers along with nanomaterials or other inhibitors for the development of more potent biocidal therapies.

Defective graphene domains in boron nitride sheets.

Novel two-dimensional materials have emerged as hybrid structures that combine graphene and hexagonal boron nitride (h-BN) domains. During their growth process, structural defects such as vacancies and change of atoms connectivity are unavoidable. In the present study, we use first-principle calculations to investigate the electronic structure of graphene domains endowed with a single carbon atom vacancy or Stone-Wales defects in h-BN sheets. The results show that both kinds of defects yield localized states within the bandgap. Alongside this change in the bandgap configuration, it occurs a splitting of the spin channels in such a way that electrons with up and down spins populate different energy levels above and below the Fermi level, respectively. Such a spin arrangement is associated to lattice magnetization. Stone-Wales defects solely point to the appearance of new intragap levels. These results demonstrated that vacancies could significantly affect the electronic properties of hybrid graphene/h-BN sheets. Graphical Abstract A Boron-Nitride sheet doped with a vacancy endowed Carbon domain.

Tuning the electronic structure properties of MoS2 monolayers with carbon doping.

The structural and electronic properties of MoS2 sheets doped with carbon line domains are theoretically investigated through density functional theory calculations. It is primarily studied how the system's electronic properties change when different domain levels are considered. These changes are also reflected in the geometry of the system, which acquires new properties when compared to the pristine structure. We predict, both qualitative and quantitatively, how the energy gap changes as a function of domain types. Strikingly, the band structure for the doped system shows semiconducting behavior with an indirect-bandgap, which is narrower than the one for bulk MoS2. This is an important feature as far as gap tuning engineering is concerned. It has a profound impact on the applicability of these systems in electronic devices, where an indirect bandgap favors the quantum yield efficiency.

Prevalencia, características y valor pronóstico del síndrome metabólico en los síndromes coronarios agudos / Prevalence, characteristics and prognostic value of metabolic syndrome in patients with acute coronary syndromes

El síndrome metabólico (SM) es una entidad compuesta por diversas alteraciones que confieren un aumento del riesgo cardiovascular y de diabetes a largo plazo. Sus características en pacientes con síndromes coronarios agudos (SCA) son prácticamente desconocidas. Objetivos: Determinar la prevalencia, las características y el valor pronóstico del síndrome metabólico (SM) en los síndromes coronarios agudos (SCA). Evaluar su correlación con los factores de riesgo coronario (FRC) y los hábitos dietéticos y analizar una nueva definición recientemente propuesta. Material y métodos: Se incluyeron pacientes consecutivos ingresados en Unidad Coronaria con infarto agudo de miocardio o angina inestable. Se diagnosticó SM en base a los criterios del NCEP-ATP III. La nueva definición analizada fue la propuesta por la International Diabetes Federation. Resultados: Se incluyeron en el estudio 239 pacientes. El SM estuvo presente en el 53,3 por ciento de los casos y fue más frecuente en las mujeres (OR 2,53; IC 95 por ciento: 1,24-5,18) (p = 0,005). No presentó correlación significativa con el pronóstico hospitalario ni con los hábitos dietéticos. Su prevalencia según la nueva definición fue casi idéntica (53 por ciento) y si bien tuvo valor pronóstico en el análisis univariado, no lo conservó en el multivariado. Conclusiones: La prevalencia del SM en los SCA es más elevada que la informada para otras poblaciones. No parece tener valor pronóstico a corto plazo. La nueva definición no modificó su prevalencia ni agregó información pronóstica independiente.