Novel electrochemical sensor for the selective recognition of chlorogenic acid.

In this study, a novel sensitive molecularly imprinted electrochemical sensor was constructed for the selective detection of chlorogenic acid (CGA) by deposition of a molecularly imprinted siloxane (MIS) film, prepared by sol-gel process, onto Au bare electrode surface. Initially, a (3-mercaptopropyl)siloxane layer (MSL) was formed on the Au bare surface, followed by a siloxane layer obtained from the acid-catalyzed hydrolysis/condensation of a solution constituted by tetraethoxysilane (TEOS), phenyltriethoxysilane (PTEOS), 3-(aminopropyl)trimethoxysilane (APTMS) and CGA, as a molecular template. After the GCA extraction the MIS imprinted film was electrochemically characterized using differential pulse voltammetry (DPV). The MIS/Au sensor was tested in a solution of the CGA template and other similar molecules. This electrode displayed excellent selectivity towards CGA when compared with structurally similar molecules. Under optimized experimental conditions, the peak current response of the sensor for CGA was linear from 5.0 × 10(-7)mol L(-1) to 1.4 × 10(-5)mol L(-1), and the detection limit was 1.48 × 10(-7)mol L(-1). The MIS/Au sensor was successfully applied for the determination of CGA in coffee and tea samples.

Speciation of Sb(III) and Sb(V) in meglumine antimoniate pharmaceutical formulations by PSA using carbon nanotube electrode.

A new and simple electroanalytical method for speciation of Sb(III) and Sb(V) in pharmaceutical formulation by potentiometric stripping analysis (PSA) using a multiwall carbon nanotube paste electrode was developed. All instrumental and chemical parameters influencing the performance of the method were carefully assessed and optimized. Trivalent antimony was determined in acid medium (pH 3.6) under the optimized condition (deposition potential of -0.7 V, deposition time of 180 s, ionic strength of 0.3M and oxidant mercury concentration of 10 mg l(-1)). Total antimony was determined after quantitative reduction of Sb(V) with l-cysteine (1.5%, w/v) and its concentration was calculated from difference between the total antimony and Sb(III). The developed method provided two distinct linear calibration one ranging from 10 up to 50 microg l(-1) and other from 100 up to 800 microg l(-1) with respective correlation coefficient of 0.9978 and 0.9993, presenting a detection limit of 6.2 microg l(-1). Repeatability for the six independent samples expressed in terms of relative standard deviation was found to be 3.01 and 1.39% for 40.0 and 300.0 microg l(-1) antimony concentration, respectively. Results on the effect of foreign substances [Al(III), Mg(II), Fe(III), Cd(II), Zn(II) and meglumine] on analytical signal of antimony showed no interference even using high content of foreign ions in the analyte:interferent ratio up to 1:100. The proposed method was successfully applied for the speciation of Sb(III) and Sb(V) in pharmaceutical formulation and the accuracy was assessed from addition and recovery tests as well as comparing with graphite furnace atomic absorption spectrometry (GF AAS) technique used as reference analytical method.

Synthesis and application of a peroxidase-like molecularly imprinted polymer based on hemin for selective determination of serotonin in blood serum.

This work reports the preparation of a molecularly imprinted polymer (MIP) for selective catalytic detection of serotonin (5-hydroxytryptamine, 5-HT). The process is based on the synthesis of polymers with hemin introduced as the catalytic center to mimic the active site of peroxidase. The copolymer MIP, containing artificial recognition sites for 5-HT, has been prepared by bulk polymerization using methacrylic acid (MAA) and hemin as the functional monomers, and ethylene glycol dimethacrylate (EGDMA) as the cross-linker. For the determination of 5-HT, a flow injection analysis system coupled to an amperometric detector was optimized using multivariate analysis. The effects of different parameters, such as pH, buffer flow rate, buffer nature, peroxide concentration and sample volume were evaluated. After optimizing the experimental conditions, a linear response range from 1.0 up to 1000.0 micromolL(-1) was obtained with a sensitivity of 0.4nA/ micromolL(-1). The detection limit was found to be 0.30 micromolL(-1), while the precision values (n=6) evaluated by relative standard deviation (R.S.D.) were, respectively, 1.3 and 1.7% for solutions of 50 and 750 micromolL(-1) of 5-HT. No interference was observed by structurally similar compounds (including epinephrine, dopamine and norepinephrine), thus validating the good performance of the imprinted polymer. The method was applied for the determination of 5-HT in spiked blood serum samples.

Electrochemical investigations of the reaction mechanism and kinetics between NADH and redox-active (NC)2C6H3-NHOH/(NC)2C6H3-NO from 4-nitrophthalonitrile-(NC)2C6H3-NO2-modified electrode.

A simple and sensitive method for the electrocatalytic detection of NADH on a carbon paste electrode modified with a redox-active (NC)(2)C(6)H(3)-NO/(NC)(2)C(6)H(3)-NHOH (NOPH/NHOHPH) electrogenerated in situ from 4-nitrophthalonitrile (4-NPHN) is presented. The electrode modified with 4-NPHN showed an efficient electrocatalytic activity towards the oxidation of NADH with activation overpotential of 0.12V vs. Ag/AgCl. The formation of an intermediate charge transfer complex is proposed for the charge transfer reaction between NADH and the 4-NPHN-resulting system. The second-order rate constant for electrocatalytic oxidation of NADH, kappa(obs), and the apparent Michaelis-Menten constant K(M), at pH 7.0 were evaluated with rotating disk electrode (RDE) experiments, giving 1.0 x 10(4)mol(-1)Ls(-1) and 2.7 x 10(-5)mol L(-1), respectively. Employing the Koutecky-Levich approach indicated that the NADH oxidation reaction involves two electrons. The sensor provided a linear response range for NADH from 0.8 up to 8.5 micromol L(-1) with sensitivity, detection, quantification limits and time response of 0.50 microA L micromol(-1), 0.25micromol L(-1), 0.82 micromol L(-1) and 0.1s, respectively. The repeatability of the measurements with the same sensor and different sensors, evaluated in terms of relative standard deviation, were 4.1 and 5.0%, respectively, for n=10.