The core microbiome is responsible for volatile silicon and organic compounds degradation during anoxic lab scale biotrickling filter performance.

Volatile silicon compounds present in the biogas of anaerobic digesters can cause severe problems in the energy recovery systems, inducing costly damages. Herein, the microbial community of a lab-scale biotrickling filter (BTF) was studied while testing its biodegradation capacity on octamethylcyclotetrasiloxane (D4) and decamethylcyclopentasiloxane (D5), in the presence of toluene, limonene and hexane. The reactor performance was tested at different empty bed residence times (EBRT) and packing materials. Community structure was analysed by bar-coded amplicon sequencing of the 16S rRNA gene. Microbial diversity and richness were higher in the inoculum and progressively decreased during BTF operation (Simpson's diversity index changing from 0.98-0.90 and Richness from 900 to 200 OTUs). Minimum diversity was found when reactor was operated at relatively low EBRT (7.3 min) using a multicomponent feed. The core community was composed of 36 OTUs (accounting for 55% of total sequences). Packing material played a key role in the community structure. Betaproteobacteriales were dominant in the presence of lava rock and were partially substituted by Corynebacteriales and Rhizobiales when activated carbon was added to the BTF. Despite these changes, a stable and resilient core microbiome was selected defining a set of potentially degrading bacteria for siloxane bioremoval as a complementary alternative to non-regenerative adsorption onto activated carbon.

Potential use of Methylibium sp. as a biodegradation tool in organosilicon and volatile compounds removal for biogas upgrading.

Organosilicon compounds are the most undesirable compounds for the energy recovery of biogas. These compounds are still resistant to biodegradation when biotechnologies are considered for biogas purification. Herein we isolated 52 bacterial species from anaerobic batch enrichment cultures (BEC) saturated with D4 and from an anaerobic lab-scale biotrickling filter (BTF) fed with a gas flow containing D4 as unique carbon source. Among those Methylibium sp. and Pseudomonas aeruginosa showed the highest capacity to remove D4 (53.04% ±â€¯0.03 and 24.42% ±â€¯0.02, respectively). Contrarily, co-culture evaluation treatment for the biodegradation of siloxanes together with volatile organic compounds removed a lower concentration of D4 compared to toluene and limonene, which were completely removed. Remarkably, the siloxane D5 proved to be more biodegradable than D4. Substrates removal values achieved by Methylibium sp. suggested that this bacterial isolate could be used in biological removal technologies of siloxanes.

Efficient removal of siloxanes and volatile organic compounds from sewage biogas by an anoxic biotrickling filter supplemented with activated carbon.

The removal of siloxanes (D4 and D5) and volatile organic contaminants (hexane, toluene and limonene) typically found in sewage biogas was investigated in a lab-scale biotrickling filter (BTF) packed with lava rock under anoxic conditions. Complete removal efficiencies for toluene and limonene were recorded at all empty bed residence time (EBRT) tested. The influence of EBRT was remarkable on the abatement of D5, whose removal decreased from 37% at 14.5 min to 16% at 4 min, while the removal of D4 and hexane remained below 16%. The packing material was supplemented with 20% of activated carbon aiming at increasing the mass transfer of the most hydrophobic pollutants. This strategy supported high removal efficiencies of 43 and 45% for hexane and D5 at the lowest EBRT. CO2 and silica were identified as mineralization products along with the presence of metabolites in the trickling solution such as dimethylsilanediol, 2-carene and α-terpinene.

Sewage biogas efficient purification by means of lignocellulosic waste-based activated carbons.

The present paper evaluates the efficiency of sustainable activated carbons obtained from the valorization of lignocellulosic waste in removing siloxanes and volatile organic compounds for the purification of anaerobic digester biogas. Pyrolized and non-pyrolized lignocellulosic residues generated in food and wood industries were used as precursor materials to obtain experimental adsorbents by a chemical activation process using several activating agents. The highest porosity was obtained by non-pyrolized residue activated by K2CO3 at 900 °C. The performance of the experimental materials was compared with that of commercial activated carbons in gas adsorption tests of siloxanes (octamethylcyclotetrasiloxane and hexamethyldisiloxane) and volatile organic compounds (toluene and limonene). The waste-based activated carbons developed in this work proved to be more efficient for the removal of both siloxanes and VOCs than the commercial samples in most of the conditions tested. Adsorption capacities correlated with porosity, while the more relevant pore size depends on the adsorbate.