ABSTRACT
The interest of the fusion community in Pd-Ag membranes has grown in the last decades due to the high value of hydrogen permeability and the possibility of continuous operation, making it a promising technology when a gaseous stream of hydrogen isotopes must be recovered and separated from other impurities. This is the case of the Tritium Conditioning System (TCS) of the European fusion power plant demonstrator, called DEMO. This paper presents an experimental and numerical activity aimed at (i) assessing the Pd-Ag permeator performance under TCS-relevant conditions, (ii) validating a numerical tool for scale-up purposes, and (iii) carrying out a preliminary design of a TCS based on Pd-Ag membranes. Experiments were performed by feeding the membrane with a He-H2 gas mixture in a specific feed flow rate ranging from 85.4 to 427.2 mol h-1 m-2. A satisfactory agreement between experiments and simulations was obtained over a wide range of compositions, showing a root mean squared relative error of 2.3%. The experiments also recognized the Pd-Ag permeator as a promising technology for the DEMO TCS under the identified conditions. The scale-up procedure ended with a preliminary sizing of the system, relying on multi-tube permeators with an overall number ranging between 150 and 80 membranes in lengths of 500 and 1000 mm each.
ABSTRACT
The hydrogen/deuterium sorption properties of Ni33Ti39Nb28 synthesized by the vacuum induction melting technique were measured between 400 and 495 °C for pressure lower than 3 bar. The Sieverts law is valid up to H(D)/M < 0.2 in its ideal form; the absolute values of the hydrogenation/deuteration enthalpy are ΔH(H2) = 85 ± 5 kJ/mol and ΔH(D2) = 84 ± 4 kJ/mol. From the kinetics of absorption, the diffusion coefficient was derived, and an Arrhenius dependence from the temperature was obtained, with Ea,d = 12 ± 1 kJ/mol for both hydrogen isotopes. The values of the alloy permeability, obtained by combining the solubility and the diffusion coefficient, were of the order of 10-9 mol m-1 s-1 Pa-0.5, a value which is one order of magnitude lower than that of Ni41Ti42Nb17, until now the best Ni-Ti-Nb alloy for hydrogen purification. In view of the simplicity of the technique here proposed to calculate the permeability, this method could be used for the preliminary screening of new alloys.
ABSTRACT
Proton dynamics in Pd77Ag23 membranes is investigated by means of various neutron spectroscopic techniques, namely Quasi Elastic Neutron Scattering, Incoherent Inelastic Neutron Scattering, Neutron Transmission, and Deep Inelastic Neutron Scattering. Measurements carried out at the ISIS spallation neutron source using OSIRIS, MARI and VESUVIO spectrometers were performed at pressures of 1, 2, and 4 bar, and temperatures in the 330-673 K range. The energy interval spanned by the different instruments provides information on the proton dynamics in a time scale ranging from about 102 to 10-4 ps. The main finding is that the macroscopic diffusion process is determined by microscopic jump diffusion. In addition, the vibrational density of states of the H atoms in the metal lattice has been determined for a number of H concentrations and temperatures. These measurements follow a series of neutron diffraction experiments performed on the same sample and thus provide a complementary information for a thorough description of structural and dynamical properties of H-loaded Pd-Ag membranes.
Subject(s)
Neutron Diffraction , Neutrons , Palladium/chemistry , Protons , Silver/chemistry , TemperatureABSTRACT
Non-evaporable getters (NEGs) are metallic compounds of the IV group, particularly titanium and/or zirconium-based alloys and are usually used as pumps in vacuum technologies since they are able to sorb, by chemical reactions, most of the active gas molecules, with particular efficacy towards hydrogen isotopes. This work suggests an alternative application of these materials to fusion nuclear reactors, where there is the need to recover small amount of tritium from the large helium flow rate composing the primary coolant loop. Starting from the tritium mass balance inside the primary coolant loop, the amount of coolant to be routed inside the coolant purification system (CPS) is identified. Then a feasibility study, based on the bulk getter theory, is presented by considering three different commercial alloys, named ST707, ST101 and ZAO. The results provide the mass, the area and the regeneration parameters of the three different alloys necessary to fulfill the requirements of the CPS unit. By comparing the features of the three alloys, the ZAO material appears the most promising for the proposed application because it requires the lower amount of material and a lower number of regeneration cycles.
