Studies of Protein Binding to Biomimetic Membranes Using a Group of Uniform Materials Based on Organic Salts Derived From 8-Anilino-1-naphthalenesulfonic Acid.

Tuning the 8-anilino-1-naphthalenesulfonic acid (ANS) structure usually requires harsh conditions and long reaction times, which can result in low yields. Herein, ANS was modified to form an ANS group of uniform materials based on organic salts (GUMBOS), prepared with simple metathesis reactions and distinct cations, namely tetrabutylammonium (N4444), tetrahexylammonium (N6666), and tetrabutylphosphonium (P4444). These ANS-based GUMBOS were investigated as fluorescent probes for membrane binding studies with four proteins having distinct physicochemical properties. Liposomes of 1,2-dimyristoyl-sn-glycero-3-phosphocholine were employed as membrane models as a result of their ability to mimic the structure and chemical composition of cell membranes. Changes in fluorescence intensity were used to monitor protein binding to liposomes, and adsorption data were fitted to a Freundlich-like isotherm. It was determined that [N4444][ANS] and [P4444][ANS] GUMBOS have enhanced optical properties and lipophilicity as compared to parent ANS. As a result, these two GUMBOS were selected for subsequent protein-membrane binding studies. Both [N4444][ANS] and [P4444][ANS] GUMBOS and parent ANS independently reached membrane saturation within the same concentration range. Furthermore, distinct fluorescence responses were observed upon the addition of proteins to each probe, which demonstrates the impact of properties such as lipophilicity on the binding process. The relative maintenance of binding cooperativity and maximum fluorescence intensity suggests that proteins compete with ANS-based probes for the same membrane binding sites. Finally, this GUMBOS-based approach is simple, rapid, and involves relatively small amounts of reagents, making it attractive for high-throughput purposes. These results presented herein can also provide relevant information for designing GUMBOS with ameliorated properties.

Comparative analysis of electrochemical and optical sensors for detection of chronic wounds biomarkers: A review.

Chronic wounds (CW) present a significant healthcare challenge due to their prolonged healing time and associated complications. To effectively treat these wounds and prevent further deterioration, monitoring their healing progress is crucial. Traditional wound assessment methods relying on visual inspection and subjective evaluation are prone to inter-observer variability. Biomarkers play a critical role in objectively evaluating wound status and predicting healing outcomes, providing quantitative measures of wound healing progress, inflammation, infection, and tissue regeneration. Recent attention has been devoted to identifying and validating CW biomarkers. Various studies have investigated potential biomarkers, including growth factors, cytokines, proteases, and extracellular matrix components, shedding light on the complex molecular and cellular processes within CW. This knowledge enables a more targeted and personalized approach to wound management. Accurate and sensitive techniques are necessary for detecting CW biomarkers. Thus, this review compares and discusses the use of electrochemical and optical sensors for biomarker determination. The advantages and disadvantages of these sensors are highlighted. Differences in detection capabilities and characteristics such as non-invasiveness, portability, high sensitivity, specificity, simplicity, cost-effectiveness, compatibility with point-of-care applications, and real-time monitoring of wound biomarkers will be pointed out and compared. In summary, this work provides an overview of CW, explores the emerging field of CW biomarkers, and discusses methods for detecting these biomarkers, with a specific focus on optical and electrochemical sensors. The potential of further research and development in this field for advancing wound care and improving patient outcomes will also be noted.

Fluoroquinolone-Based Organic Salts (GUMBOS) with Antibacterial Potential.

Antimicrobial resistance is a silent pandemic considered a public health concern worldwide. Strategic therapies are needed to replace antibacterials that are now ineffective. One approach entails the use of well-known antibacterials along with adjuvants that possess non-antibiotic properties but can extend the lifespan and enhance the effectiveness of the treatment, while also improving the suppression of resistance. In this regard, a group of uniform materials based on organic salts (GUMBOS) presents an alternative to this problem allowing the combination of antibacterials with adjuvants. Fluoroquinolones are a family of antibacterials used to treat respiratory and urinary tract infections with broad-spectrum activity. Ciprofloxacin and moxifloxacin-based GUMBOS were synthesized via anion exchange reactions with lithium and sodium salts. Structural characterization, thermal stability and octanol/water partition ratios were evaluated. The antibacterial profiles of most GUMBOS were comparable to their cationic counterparts when tested against Gram-positive S. aureus and Gram-negative E. coli, except for deoxycholate anion, which demonstrated the least effective antibacterial activity. Additionally, some GUMBOS were less cytotoxic to L929 fibroblast cells and non-hemolytic to red blood cells. Therefore, these agents exhibit promise as an alternative approach to combining drugs for treating infections caused by resistant bacteria.

Fine-tuning the cytotoxicity of ruthenium(II) arene compounds to enhance selectivity against breast cancers.

Ruthenium-based complexes have been suggested as promising anticancer drugs exhibiting reduced general toxicity compared to platinum-based drugs. In particular, Ru(η6-arene)(PTA)Cl2 (PTA = 1,3,5-triaza-7-phosphaadamantane), or RAPTA, complexes have demonstrated efficacy against breast cancer by suppressing metastasis, tumorigenicity, and inhibiting the replication of the human tumor suppressor gene BRCA1. However, RAPTA compounds have limited cytotoxicity, and therefore comparatively high doses are required. This study explores the activity of a series of RAPTA-like ruthenium(II) arene compounds against MCF-7 and MDA-MB-231 breast cancer cell lines and [Ru(η6-toluene)(PPh3)2Cl]+ was identified as a promising candidate. Notably, [Ru(η6-toluene)(PPh3)2Cl]Cl was found to be remarkably stable and highly cytotoxic, and selective to breast cancer cells. The minor groove of DNA was identified as a relevant target.

Kinetic Determination of Acetylsalicylic Acid Using a CdTe/AgInS2 Photoluminescence Probe and Different Chemometric Models.

The combination of multiple quantum dots (QDs) in a multi-emitter nanoprobe can be envisaged as a promising sensing scheme, as it enables obtaining a collective response of individual emitters towards a given analyte and allows for achieving specific analyte-response profiles. The processing of these profiles using adequate chemometric methods empowers a more sensitive, reliable and selective determination of the target analyte. In this work, we developed a kinetic fluorometric method consisting of a dual CdTe/AgInS2 quantum dots photoluminescence probe for the determination of acetylsalicylic acid (ASA). The fluorometric response was acquired as second-order time-based excitation/emission matrices that were subsequently processed using chemometric methods seeking to assure the second-order advantage. The data obtained in this work are considered second-order data as they have a three-dimensional size, I × J × K (where I represents the samples' number, J the fluorescence emission wavelength while K represents the time). In order to select the most adequate chemometric method regarding the obtained data structure, different chemometric models were tested, namely unfolded partial least squares (U-PLS), N-way partial least squares (N-PLS), multilayer feed-forward neural networks (MLF-NNs) and radial basis function neural networks (RBF-NNs).

Anticancer ruthenium(II) tris(pyrazolyl)methane complexes with bioactive co-ligands.

In comparison with RuII-arene compounds, the medicinal potential of homologous RuII-tpm compounds [tpm = tris(pyrazolyl)methane] is underexplored. Pyridine, 4-pyridinemethanol and four functionalized pyridines, synthesized from the esterification of 4-pyridinemethanol with bioactive carboxylic acids (i.e., ethacrynic acid, ibuprofen, flurbiprofen and naproxen), react with the precursor [RuCl(κ3-tpm)(PPh3)2]Cl (1) to afford [RuCl(κ3-tpm)(PPh3)(L)]Cl (2-7, L = pyridine ligand), in 78-91% yields. All products were fully characterized by HR-ESI mass spectrometry, IR and multinuclear NMR spectroscopy and the solid-state structures of two of the complexes, i.e. where L = pyridine and 4-pyridinemethanol, were ascertained by single crystal X-ray diffraction. The {Ru-tpm-PPh3} assembly is stable in D2O and in biological medium (DMEM) at 37 °C, with a tendency to slowly dissociate the pyridine ligand. The antiproliferative activity of the complexes was assessed on the cancerous A2780 and A2780cisR cell lines, and the nontumoral HEK 293T cell line; moreover inhibition assays were carried out on the complexes towards COX-2 and GSTP1 enzymes.

Automated approach for the evaluation of glutathione-S-transferase P1-1 inhibition by organometallic anticancer compounds.

A novel automated method based on sequential injection analysis (SIA), a non-segmented flow injection technique, was developed to evaluate glutathione S-transferase P1-1 (GST P1-1) activity in the presence of organometallic complexes with putative anticancer activity. The assay is based on the reaction of L-glutathione (GSH) and 1-chloro-2,4-dinitrobenzene (CDNB) in the presence of GST P1-1 to afford the GS-DNB conjugate and the reaction may be monitored by an increase in absorbance at 340 nm. A series of ruthenium, iron, osmium and iridium complexes were evaluated as GST P1-1 inhibitors by evaluating their half-maximal inhibitory concentration (IC50). An iridium compound displays the lowest IC50 value of 6.7 ± 0.7 µM and an iron compound displays the highest IC50 value of 275 ± 9 µM. The SIA method is simple to use, robust, reliable, and efficient and uses fewer reagents than batch methods and each analysis takes only 5 minutes.

Protein discrimination using erythrosin B-based GUMBOS in combination with UV-Vis spectroscopy and chemometrics.

GUMBOS (Group of Uniform Materials Based on Organic Salts) have recently emerged as interesting materials for protein analysis due to their unique features and high tunability. In this regard, four novel erythrosin B (EB)-based GUMBOS were synthesized and their potential to discriminate among proteins with distinct properties (e.g., size, charge, and hydrophobicity) was assessed. These solid-phase materials were prepared using a single-step metathesis reaction between EB and various phosphonium and ammonium cations, namely tetrabutylphosphonium (P4444+), tributylhexadecylphosphonium (P44416+), tetrabutylammonium (N4444+), and benzyldimethylhexadecylammonium (BDHA+). Subsequently, the effect of pH (3.0, 4.5, and 6.0) and reaction time (5, 10, and 15 min) on the discriminatory power of synthesized GUMBOS was evaluated. Absorption spectra resulting from the interaction between EB-based GUMBOS and proteins were analyzed using partial least squares discriminant analysis (PLSDA). Unlike time, the pH value was determined to have influence over GUMBOS discrimination potential. Correct protein assignments varied from 86.5% to 100.0%, and the best discriminatory results were observed for [P4444]2[EB] and [N4444]2[EB] at pH 6.0. Additionally, these two GUMBOS allowed discrimination of protein mixtures containing different ratios of albumin and myoglobin, which appeared as individualized clusters in the PLSDA scores plots. Overall, this study showcases EB-based GUMBOS as simple synthetic targets to provide a label-free, cost-effective, rapid, and successful approach for discrimination of single proteins and their mixtures.

Photoluminescent and visual determination of ibandronic acid using a carbon dots/AgInS2 quantum dots ratiometric sensing platform.

A sensing platform combining carbon dots (CDs, with blue emission) and thiomalic acid (TMA)-capped AgInS2 quantum dots (QDs, with orange emission) was developed aiming the photoluminescence (PL) ratiometric determination of ibandronic acid (IBAN), a bisphosphonate pharmaceutical. The ternary AgInS2 QDs were used for IBAN probing, undergoing a concentration-related PL quenching in its presence, whilst the PL of CDs remained practically unaffected due to its chemical inertness towards the antiresorptive drug, provided an intrinsic self-reference fluorophore. In addition, a visual sensing approach was also proposed, employing for the first time ternary QDs. This relied on RGB images acquired by means of a digital camera and seek the development of a rapid IBAN screening test. The developed sensing platforms were employed for IBAN determination in samples with pharmaceutical interest providing good results, in accordance to the reported IBAN levels, and obtaining recovery values between 98 and 103%.

Chemometric-assisted kinetic determination of oxytetracycline using AgInS2 quantum dots as PL sensing platforms.

In this work a kinetic fluorometric methodology relying on the time-based monitoring of the photoluminescence quenching of AgInS2 ternary quantum dots induced by oxytetracycline, was developed. The kinetic approach allowed not only to reduce the LOD and improve sensitivity and selectivity but also to collect second-order data that was explored for the quantification of the target analyte in the presence of uncalibrated interfering species. Upon processing the acquired second-order kinetic PL data by unfolded partial least-squares (U-PLS), oxytetracycline was quantified in commercially available pharmaceutical formulations. The obtained results, namely an R2P higher than 0.99 and RE lower than 8%, proved the suitability and accuracy of the developed approach.

A Strategy to Conjugate Bioactive Fragments to Cytotoxic Diiron Bis(cyclopentadienyl) Complexes.

A series of bioactive molecules were synthesized from the condensation of aspirin or chlorambucil with terminal alkynes bearing alcohol or amine substituents. Insertion of the resulting alkynes into the iron-carbyne bond of readily accessible diiron bis(cyclopentadienyl) µ-aminocarbyne complexes, [1a,b]CF3SO3, afforded novel diiron complexes with a bridging vinyliminium ligand, [2-10]CF3SO3, functionalized with a bioactive moiety. All compounds were characterized by elemental analysis and IR and multinuclear NMR spectroscopy and in three cases by single-crystal X-ray diffraction. Moreover, the D2O solubility, stability in D2O and cell culture media, and octanol-water partition coefficients of diiron complexes were determined spectroscopically. The cytotoxicity of the complexes was assessed in the tumorigenic A2780 and A2780cisR and the nontumorigenic HEK 293T cell lines. Some complexes exhibit high potency and the ability to overcome resistance in A2780cisR cells (aspirin complexes) or high selectivity relative to HEK 293T cells (chlorambucil complexes). Further studies indicate that the complexes significantly trigger intracellular ROS production, irrespective of the nature of the bioactive fragment. DNA alkylation and protein binding studies were also undertaken.

Development of an automated yeast-based spectrophotometric method for toxicity screening: Application to ionic liquids, GUMBOS, and deep eutectic solvents.

Saccharomyces cerevisiae has been used as a eukaryotic model organism for studying the toxic effects of various compounds. In this context, an automated spectrophotometric method based on the enzymatic reduction of methylene blue dye to a colorless product by living yeast cells was implemented in a sequential injection analysis system. Loss of yeast viability/impaired metabolic activity was monitored by an increase in optical density at 664 nm. To prove the usefulness of this approach, the toxicity of ILs (ionic liquids), GUMBOS (group of uniform materials based on organic salts), and DESs (deep eutectic solvents) was examined. Differences obtained between IC50 values confirmed the impact of structural elements on each compounds' toxicity. While DESs appeared to be less toxic than ILs, GUMBOS were found to be among the most toxic compounds to yeast cells and thus can be viewed as promising antimicrobial candidates. The automated methodology showed satisfactory repeatability and reproducibility (RSD < 9%), which is in good agreement with Green Chemistry principles. In fact, the method required consumption of only 40 µL of reagents and produced less than 2 mL of effluents per cycle. Thus, the developed assay can be used as an alternative tool for toxicity screening.

Automatic evaluation of cyclooxygenase 2 inhibition induced by metal-based anticancer compounds.

An automatic methodology based on micro sequential injection analysis coupled to a lab-on-valve system (termed µSIA-LOV) was developed and used to determine the ability of metal-based anticancer compounds to inhibit cyclooxygenase 2 (COX-2) activity. COX-2 may be involved in pathogenesis of cancer and it is overexpressed in several types of solid tumors. Since platinum-based compounds are extensively used in the treatment of cancer, and ruthenium compounds are considered as promising candidates for next generation of non-targeted anticancer drugs, it is interesting to establish whether COX-2 inhibition is relevant to their mode of action. The µSIA-LOV system was optimized and the IC50 values of each compound were calculated. All the results present RSD values less than 2.5%. IC50 values of 9.7 ±â€¯0.6 µM to 207 ±â€¯3 µM were obtained, with the most active inhibitor for COX-2 being rofecoxib with the metal compounds exhibiting IC50 values in the range 13.7 ±â€¯1.6 to 207 ±â€¯3. The results obtained in this work provide significant information about the mechanism of the studied compounds, mostly ruthenium-based compounds, and the role of COX-2 in their mode of action. Moreover, this work confirmed the potential of the µSIA-LOV system as a simple, versatile, robust, and rapid analytical tool for automating the determination of IC50 values of metal-based compounds.

Evaluation of Ionic Liquids and Ionic Liquids Active Pharmaceutical Ingredients Inhibition in Elastase Enzyme Activity.

Human neutrophil elastase (HNE) is used as diagnostic biomarker for inflammation/infection. In this work, 10 ionic liquids (ILs) and 11 ionic liquids active pharmaceutical ingredients (ILs-APIs) were tested to evaluate the inhibition effect on the activity of porcine pancreatic elastase enzyme, frequently employed as a model for HNE. The insertion of ionic liquids in some drugs is useful, as the insertion of ILs with inhibitory capacity will also slow down all processes in which this enzyme is involved. Therefore, a spectrophotometric method was performed to the determination of EC50 values of the compounds tested. EC50 values of 124 ± 4 mM to 289 ± 11 mM were obtained, with the most toxic IL for elastase being tetrabutylammonium acetate and the least toxic 1-butyl-3-methylimidazolium acetate. Moreover, sodium salicylate (raw material) presented the lower and benzethonium bistriflimide the higher EC50 when compared with all the IL-APIs tested. This work provides significant information about the effect of the studied IL and IL-APIs in elastase enzyme activity.

GUMBOS and nanoGUMBOS in chemical and biological analysis: A review.

GUMBOS (group of uniform materials based on organic salts) is a novel class of materials that exhibits similar features to those of ionic liquids, but have melting points between 25 and 250 °C. GUMBOS can be easily converted into nanomaterials (nanoGUMBOS), with advantages of working at nanoscale. Due to the huge number of possible cation-anion combinations, these materials can be multifunctional and designed for a specific task. This review highlights the possibility of fine-tuning GUMBOS physical and chemical properties in view of changing their ionic counterparts. Their outstanding potential for analytical applications is shown through recent developments in areas such as sensing, and solid-phase extraction. Available methods for synthesis of nanoGUMBOS, and their different outcomes in shapes and optical properties are described, with pros and cons being outlined. Finally, an analysis is made of opportunities and challenges faced by this class of organic ionic materials.

Immobilized imidazolium-based ionic liquids in C18 for solid-phase extraction.

In this work, two solid-phases based on imidazolium-based ionic liquids were obtained and characterized for solid-phase extraction of fluoroquinolones. The process of immobilization was performed replacing a toxic reagent by UV-irradiation to get a harmless process. The obtained solid-phases were characterized by nuclear magnetic resonance spectroscopy and elemental analysis. Each solid-phase was packed in a cartridge and was used in solid-phase extraction processes for norfloxacin and ciprofloxacin, after the optimization of some parameters such as the elution solvent, the eluent volume and, the sample volume to be used during the loading step. The developed solid-phases with immobilized ionic liquids were successfully implemented for the studied compounds and indicate high probabilities to be useful in solid-phase extractions of other fluoroquinolones.

Automatic methodologies to perform loading and release assays of anticancer drugs from mesoporous silicon nanoparticles.

Two automatic methodologies were developed to perform the loading and release assays of drugs from porous silicon (PSi) nanoparticles. 5-Fluorouracil (5-FU) was selected as a model drug, and different functionalized PSi nanoparticles were used. While for drug loading studies the reproducible characteristics of flow systems were explored regarding mixture and volumes taken, in the drug release flow methodology versatility in accommodating different devices around the valve were tested. Fluorescent properties of 5-FU were used with detection limit of 9 × 10-4 mg L-1 and a linear response up to 5 mg L-1 The drug loading and release procedures were optimized in sequential injection analysis (SIA) systems obtaining a huge economy regarding the time spent (4 min towards 2 h). Batch and SIA methods were tested and compared for the different behaviours of the PSi nanoparticles towards both methodologies and no noteworthy differences were obtained with Student's t-test for loading with a calculated t value of 2.04 showing the absence of statistical differences. All the results present a RSD less than 10%. So, the developed automatic methodologies are a viable alternative to load drugs and to study the release profiles from PSi nanoparticles.

The role of ionic liquids in the biocatalytic evaluation of bisphenol levels as contaminant: an automatic approach.

An automatic assay was developed that is intended to be a generic tool for evaluation of a horseradish peroxidase activity in different ionic liquids (ILs). Ionic liquids with different characteristics were used and their effects on the enzymatic reaction, were compared with those obtained with conventional organic solvents. In addition, ILs were tested as solvents for the enzyme substrate (bisphenol A (BPA)). ILs were shown to be a good alternative to conventional organic solvents from either the effect on enzymatic activity or the solubilization of bisphenol. Since bisphenol A is an endocrine disruptor frequently used in plastic industries, it was also applied the developed enzymatic methodology for quantification of this compound in real beverage samples. To increase the sensitivity (already increased by the use of an IL) and the selectivity of the methodology, a sample pre-treatment using a molecular recognition solid phase extraction was applied. Finally, the methodology presented detection and quantification limits of 7.73 × 10-4 and 1.29 × 10-3 mmol L-1 and a linear range up to 1.00 mmol L-1, allowing accurate and reliable quantifications of bisphenol in beer and cola drink samples. This work confirmed the potential of a sequential injection analysis (SIA) system as a simple, versatile, robust, and rapid analytical tool for automating enzymatic assays in ILs medium and, at the same time, showed it to be a relevant automatic alternative for routine determinations of bisphenol A in food samples.

Manual or automated measuring of antipsychotics' chemical oxygen demand.

Antipsychotic (AP) drugs are becoming accumulated in terrestrial and aqueous resources due to their actual consumption. Thus, the search of methods for assessing the contamination load of these drugs is mandatory. The COD is a key parameter used for monitoring water quality upon the assessment of the effect of polluting agents on the oxygen level. Thus, the present work aims to assess the chemical oxygen demand (COD) levels of several typical and atypical antipsychotic drugs in order to obtain structure-activity relationships. It was implemented the titrimetric method with potassium dichromate as oxidant and a digestion step of 2h, followed by the measurement of remained unreduced dichromate by titration. After that, an automated sequential injection analysis (SIA) method was, also, used aiming to overcome some drawbacks of the titrimetric method. The results obtained showed a relationship between the chemical structures of antipsychotic drugs and their COD values, where the presence of aromatic rings and oxidable groups give higher COD values. It was obtained a good compliance between the results of the reference batch procedure and the SIA system, and the APs were clustered in two groups, with the values ratio between the methodologies, of 2 or 4, in the case of lower or higher COD values, respectively. The SIA methodology is capable of operating as a screening method, in any stage of a synthetic process, being also more environmentally friendly, and cost-effective. Besides, the studies presented open promising perspectives for the improvement of the effectiveness of pharmaceutical removal from the waste effluents, by assessing COD values.

Chiral Derivatives of Xanthones: Investigation of the Effect of Enantioselectivity on Inhibition of Cyclooxygenases (COX-1 and COX-2) and Binding Interaction with Human Serum Albumin.

Searching of new enantiomerically pure chiral derivatives of xanthones (CDXs) with potential pharmacological properties, particularly those with anti-inflammatory activity, has remained an area of interest of our group. Herein, we describe in silico studies and in vitro inhibitory assays of cyclooxygenases (COX-1 and COX-2) for different enantiomeric pairs of CDXs. The evaluation of the inhibitory activities was performed by using the COX Inhibitor Screening Assay Kit. Docking simulations between the small molecules (CDXs; known ligands and decoys) and the enzyme targets were undertaken with AutoDock Vina embedded in PyRx-Virtual Screening Tool software. All the CDXs evaluated exhibited COX-1 and COX-2 inhibition potential as predicted. Considering that the (S)-(-)-enantiomer of the nonsteroidal anti-inflammatory drug ketoprofen preferentially binds to albumin, resulting in lower free plasma concentration than (R)-(+)-enantiomer, protein binding affinity for CDXs was also evaluated by spectrofluorimetry as well as in in silico. For some CDXs enantioselectivity was observed.