Smartphone-based Surface Plasmon Resonance Sensors: a Review.

The surface plasmon resonance (SPR) is a phenomenon based on the combination of quantum mechanics and electromagnetism, which leads to the creation of charge oscillations on a metal-dielectric interface. The SPR phenomenon creates a signal which measures refractive index change at the metal-dielectric interface. SPR-based sensors are being developed for real-time and label-free detection of water pollutants, toxins, disease biomarkers, etc., which are highly sensitive and selective. Smartphones provide hardware and software capability which can be incorporated into SPR sensors, enabling the possibility of economical and accurate on-site portable sensing. The camera, screen, and LED flashlight of the smartphone can be employed as components of the sensor. The current article explores the recent advances in smartphone-based SPR sensors by studying their principle, components, application, and signal processing. Furthermore, the general theoretical and practical aspects of SPR sensors are discussed.

A highly efficient bilayer graphene/ZnO/silicon nanowire based heterojunction photodetector with broadband spectral response.

This paper presents three self-powered photodetectors namely, p+-bilayer graphene (BLG)/n+-ZnO nanowires (NWs), p+-BLG/n+-Si NWs/p--Si and p+-BLG/n+-ZnO NWs/p--Si. The Silvaco Atlas TCAD software is utilized to characterize the optoelectronic properties of all the devices and is validated by analytical modeling. The proposed dual-junction photodetectors cover broadband spectral response varying from ultraviolet to near-infrared wavelengths. The dual-heterojunction broadband photodetector exhibits photocurrent switching with the rise and fall time of 1.48 and 1.27 ns, respectively. At -0.5 V bias, the highest external quantum efficiency, photocurrent responsivity, specific detectivity, and the lowest noise equivalent power of 71%, 0.28 A W-1, 4.2 × 1012 cmHz1/2 W-1, and 2.59 × 10-17 W, respectively, are found for the dual-heterojunction device with a wavelength of 480 nm at 300 K. The proposed nanowires based photodetectors offer great potential to be utilized as next-generation optoelectronic devices.

Quantum dot-sensitized O-linked heptazine polymer photocatalyst for the metal-free visible light hydrogen generation.

Metal-free organic polymer photocatalysts have attracted dramatic attention in the field of visible light-induced hydrogen evolution reaction (HER). Herein, we showed a polymeric O-linked heptazine polymer (OLHP) decorated with S, N co-doped graphene quantum dots (S,N-GQDs) as a photosensitizer to generate hydrogen upon quantum dot sensitization. Both of these heptazine-based systems show effective photosensitization with strong π-π interactions and enhanced photocatalytic H2 generation (24 times) as metal-free systems. Electrochemical impedance and optical measurements show effective charge transfer kinetics with decreased charge recombination, which is responsible for the enhanced photocatalytic activity. As a result, a significant high apparent quantum yield (AQY) with highest value of 10.2% was obtained for our photocatalyst OLHP/S,N-GQD10.

Affordable, Compact and Infection-Free BiPAP Machine.

Critical cases of COVID-19 require respiratory support provided primarily by mechanical ventilators. But, as per the current trend, about 15% of the cases require hospitalization and less than 5% cases are critical. Due to the massive number of COVID-19 cases all over the world, the ventilator requirement is increasing, and these traditional ventilators are quite expensive and are occupied for the critical cases, thus available in limited numbers. In this regard, BiPAP (Bilevel Positive Airway Pressure) ventilation support can be used for the less critical cases where patients do not require intubation by specialized staff and also minimizing the risk of infection during the procedure. The current article aims to deliver a design of an inexpensive BiPAP with an infection-free exhaust. BiPAP is a mode of ventilation which maintains positive pressure for air intake, and a low or zero pressure is created for expiration. The BiPAP suggested in the current article uses an air blower connected to an Arduino via a speed controller, the level of pressure and breathing rate are programmed in the Arduino, thus, the blower functions in BiPAP mode. The 3D printed mask proposed here comprises of a unique design for the intake and exhalation of air; and comprises of two sizes to fit all adults while avoiding any leakage. The design suggested is further tweaked for emergency use to support up to four patients using a single BiPAP. The mass production of the same would cost approx. INR 6500 or 85 USD.

Bilayer graphene/HgCdTe based very long infrared photodetector with superior external quantum efficiency, responsivity, and detectivity.

We present a high-performance bilayer graphene (BLG) and mercury cadmium telluride (Hg1-x Cd x=0.1867Te) heterojunction based very long wavelength infrared (VLWIR) conductive photodetector. The unique absorption properties of graphene enable a long carrier lifetime of charge carriers contributing to the carrier-multiplication due to impact ionization and, hence, large photocurrent and high quantum efficiency. The proposed p+-BLG/n-Hg0.8133Cd0.1867Te photodetector is characterized and analyzed in terms of different electrical and optical characteristic parameters using computer simulations. The obtained results are further validated by developing an analytical model based on drift-diffusion, tunneling and Chu's methods. The photodetector has demonstrated a superior performance including improved dark current density (∼1.75 × 10-14 µA cm-2), photocurrent density (∼8.33 µA cm-2), internal quantum efficiency (QEint ∼ 99.49%), external quantum efficiency (QEext ∼ 89%), internal photocurrent responsivity (∼13.26 A W-1), external photocurrent responsivity (∼9.1 A W-1), noise equivalent power (∼8.3 × 10-18 W), total noise current (∼1.06 fA), signal to noise ratio (∼156.18 dB), 3 dB cut-off frequency (∼36.16 GHz), and response time of 9.4 ps at 77 K. Furthermore, the effects of different external biasing, light power intensity, and temperature are evaluated, suggesting a high QEext of 3337.70% with a bias of -0.5 V near room temperature.

Localized surface plasmon resonance in the IR regime.

Arrays of differently sized disk shaped gold nanoantennas are prepared on glass, which show localized surface plasmon resonance and Rayleigh anomalies in the near infrared and telecom range between 1000 and 1500 nm wavelength. The spectral position of these grating resonances depends critically on the period of the array and the size of the nanoantennas. When PbS quantum dots embedded in PMMA surround the nanoantennas, an up to four fold enhancement of the photoluminescence is observed at the grating resonances due to the constructive diffractive feedback among neighboring antennas. In accordance with the grating resonances a shift of the emission towards smaller wavelengths with decreasing disk diameter is demonstrated.