ABSTRACT
In this study, we have shown how to prepare a ternary nanocomposite (Ag2S-NiMoO4-g-C3N4) consisting of graphitic carbon nitride (g-C3N4) nanosheets, silver sulfide (Ag2S) nanocrystals, and nickel molybdate (NiMoO4) nanorods and its sensing ability to detect quercetin, a flavonoid found in many fruits and vegetables. An Ag2S-NiMoO4-g-C3N4 nanocomposite-modified screen-printed electrode (SPE) exhibited remarkable sensing performance in a quercetin (Que) concentration range of 0.005 µM-20 µM with a low detection limit of 2.7 nM. Moreover, we have aimed at improving the selectivity and sensitivity of a sensor for detecting Que by optimizing the composition of Ag2S-NiMoO4-g-C3N4, the film thickness, and the electrolyte pH. The sensor's selectivity for Que was tested in the presence of potential interferents such as ascorbic acid, citric acid, fructose, glucose, lactose, maltose, mannose, sucrose, and tyrosine. The performance of the sensor was tested on a variety of food samples, including green apple, green tea, honey, and red onion skin.
Subject(s)
Nanocomposites , Nickel , Nickel/chemistry , Quercetin , Nanocomposites/chemistryABSTRACT
Metal oxide nanomaterials are widely used in many applications of renewable energy. Ytterbium oxide (Yb2O3) also attracts attention due to its similar structure to ZnO (~3,26 eV) and TiO2 (~3,36 eV) in terms of bandgap energy. In this study, Yb2O3 belonging to the lanthanide oxide family was produced as nanofiber forms by using the electrospinning technique, which allows for large-scale production, for the first time. The morphological, structural, optical, and phase properties of the produced nanofibers were investigated via XRD, SEM-Mapping, TEM, FTIR, UV-Vis, and XPS characterization techniques. As a result of these analyses, it was determined that the Yb2O3 nanofibers with a diameter of 125 ± 15 nm have a cubic crystal structure and a bandgap of 3.32 eV. The results of this study have shown that the Yb2O3 nanofibers are capable of performing performance evaluations in many different energy conversion applications and others.
ABSTRACT
In this present work, CuNiCoS4 thiospinel nanocrystals were synthesized by hot injection and characterized by X-ray diffractometry (XRD), high-resolution transmission electron microscopy (HR-TEM), and energy-dispersive X-ray spectroscopy (EDS). The XRD, EDS, and HR-TEM analyses confirmed the successful synthesis of CuNiCoS4. The obtained CuNiCoS4 thiospinel nanocrystals were tested for photodiode and capacitance applications as interfacial layer between Au and p-type Si by measuring I-V and C-V characteristics. The fabricated Au/CuNiCoS4/p-Si device exhibited good rectifying properties, high photoresponse activity, low series resistance, and high shunt resistance. The C-V characteristics revealed that capacitance and conductance of the photodiode are voltage-and frequency-dependent. The fabricated device with CuNiCoS4 thiospinel nanocrystals can be employed in high-efficiency optoelectronic applications.
ABSTRACT
In this study, rhenium/rhenium oxide nanoparticles (Re / ReO3 NPs) have been produced for the first time in ultrapure water by using Femtosecond Pulsed Laser Ablation in Liquid (fsPLAL) method. X-Ray Diffraction (XRD) measurements and results obtained for NPs show the existence of well-crystallized peaks and preferred phases. Re NPs have hexagonal structure while ReO3 NPs have the perovskite-like cubic crystal structures. The Re / ReO3 ratio is also determined to be 53 / 47 with ~ 20 nm crystallite size, while pure ReO3 crystallite sizes were measured to be ~ 25 nm. The TEM results have shown that the produced particles have a spherical shape, and particle sizes changes between ~ 20 nm and ~ 60 nm. The crystallite size is similar due to XRD results. Obtained nanoparticles exhibit promising applications for photonic devices with broad bandgap values which have measured to be 4.71 eV for Re / ReO3 NPs mixture and 4.36 eV for pure ReO3 NPs.
ABSTRACT
The present study reports, for the first time, both a facile synthesis for ternary Cu2WS4 nanocubes, which were synthesized by a simple and low-cost hot-injection method, and the hydrogen evolution reaction at a biomembrane-like polarized water/1,2-dichloroethane interface catalyzed by Cu2WS4 nanocubes. The rate of hydrogen evolution reaction is increased by about 1000 times by using Cu2WS4 nanocubes when compared to an uncatalyzed reaction.
ABSTRACT
The penternary chalcogenides Cu2CoSn(SeS)4 and Cu2ZnSn(SeS)4 were successfully synthesized by hot-injection method, and employed as a catalytic materials for efficient counter electrodes in dye-synthesized solar cells (DSSCs). The structural, compositional, morphological and optical properties of these pentenary semiconductors were characterized by X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), energy-dispersive spectrometer (EDS) and ultraviolet-visible (UV-Vis) spectroscopy. The Cu2CoSn(SeS)4 and Cu2ZnSn(SeS)4 nanocrystals had a single crystalline, kesterite phase, adequate stoichiometric ratio, 18-25 nm particle sizes which are forming nanospheres, and band gap energy of 1.18 and 1.45 eV, respectively. Furthermore, the electrochemical impedance spectroscopy and cyclic voltammograms indicated that Cu2CoSn(SeS)4 nanocrystals as counter electrodes exhibited better electrocatalytic activity for the reduction of iodine/iodide electrolyte than that of Cu2ZnSn(SeS)4 nanocrystals and conventional platinum (Pt). The photovoltaic results demonstrated that DSSC with a Cu2CoSn(SeS)4 nanocrystals-based counter electrode achieved the best efficiency of 6.47%, which is higher than the same photoanode employing a Cu2ZnSn(SeS)4 nanocrystals (3.18%) and Pt (5.41%) counter electrodes. These promising results highlight the potential application of penternary chalcogen Cu2CoSn(SeS)4 nanocrystals in low-cost, high-efficiency, Pt-free DSSCs.
