A novel conico-cylindrical flask aids easy identification of critical process parameters for cultivation of marine bacteria.

A polymethylmethacrylate (PMMA) conico-cylindrical flask (CCF) with an inner arrangement consisting of eight equidistantly spaced rectangular strips mounted radially on a circular disk to provide additional surface area for microbial attachment and ports to allow air supply was employed for melanin production by Shewanella colwelliana and antibiotic production by Pseudoalteromonas rubra. The design allowed comparison of production between (1) CCF with hydrophobic surface (PMMA-CCF), (2) CCF with hydrophilic glass surface (GS-CCF), and (3) standard unbaffled Erlenmeyer flask (EF). Melanin production in the PMMA-CCF was higher by at most 33.5% and growth of S. colwelliana by at most 309.2% compared to the other vessels. Melanin synthesis was positively correlated with reactor surface area and hydrophobicity, suspended cell growth, and biofilm formation. Antibiotic production in the EF was higher by at most 83.3%, but growth of P. rubra was higher in the PMMA-CCF by at most 54.5% compared to the other vessels. A hydrophilic vessel surface, abundant air supply, but low shear stress enhanced antibiotic production. The CCF together with the EF allowed identification of the crucial parameters (vessel surface characteristics, growth, biofilm formation, and aeration) influencing productivity, knowledge of which in the initial stages of process development will facilitate informed decisions at the later phases.

Enhanced protease production in a polymethylmethacrylate conico-cylindrical flask by two biofilm-forming bacteria.

A polymethylmethacrylate (PMMA) conico-cylindrical flask (CCF) with an inner arrangement consisting of eight equidistantly spaced rectangular strips mounted radially on a circular disk to provide additional surface area for microbial attachment was employed for protease production by two biofilm-forming bacteria, an intertidal gamma-Proteobacterium (DGII) and a chicken meat isolate, Virgibacillus pantothenticus. The flask design allowed comparison of protease production during cultivation with a hydrophilic (glass) or hydrophobic (PMMA) surface. Compared to the Erlenmeyer flask, the CCF allowed protease production that was 30% and 35% higher and growth that was 20% and 345% higher for DGII and V. pantothenticus, respectively. Protease production increased by 202% and 22% and growth by 19,275% and 940% for DGII and V. pantothenticus, respectively, in the presence of a hydrophobic as compared to a hydrophilic surface. This investigation pioneers the application of a vessel beyond the traditional shake-flask for enhancing protease production by biofilm-formers.

Bioprocessing data for the production of marine enzymes.

This review is a synopsis of different bioprocess engineering approaches adopted for the production of marine enzymes. Three major modes of operation: batch, fed-batch and continuous have been used for production of enzymes (such as protease, chitinase, agarase, peroxidase) mainly from marine bacteria and fungi on a laboratory bioreactor and pilot plant scales. Submerged, immobilized and solid-state processes in batch mode were widely employed. The fed-batch process was also applied in several bioprocesses. Continuous processes with suspended cells as well as with immobilized cells have been used. Investigations in shake flasks were conducted with the prospect of large-scale processing in reactors.

Production of a potentially novel antimicrobial compound by a biofilm-forming marine Streptomyces sp. in a niche-mimic rotating disk bioreactor.

After initial small-scale experiments, a 25.0 l rotating disk bioreactor (RDBR) was investigated for the cultivation of a biofilm-forming salt-tolerant Streptomyces sp. MS1/7, producing an antimicrobial compound. Peak activity attainment rate, PAAR (ratio of the peak antimicrobial activity, PAMA and the time taken to attain PAMA) was determined. Of the three pH values examined (8.0, 9.0 and 10.0) maximum PAAR (1.82 mm/h) was attained at pH 9.0. Three aeration rates (9.0, 6.0 and 3.0 l/min) were considered at three levels (25, 50 and 75%) of disk submergence. At the highest aeration rate and 50% submergence level, PAMA (41 mm), PAAR (1.86 mm/h) and biofilm density (BD, 0.91 g/ml) attained their highest values. At any given aeration rate, PAMA was always higher at 50% submergence level. This supports our earlier premise that ideal intertidal conditions, 12 h periods of immersion and emersion, promote maximum BD and antimicrobial production in the niche-mimic RDBR.

Enhanced production of antimicrobial compounds by three salt-tolerant actinobacterial strains isolated from the Sundarbans in a niche-mimic bioreactor.

A novel reactor system, the rotating disk bioreactor (RDBR), was used to mimic the niche environmental conditions of three salt-tolerant estuarine actinobacteria isolated from the Sundarbans region off the Bay of Bengal, designated MS310 (99% similar in its 16S rRNA gene sequence to Streptomyces parvallus), MS3/20 and MS1/7. The RDBR, operated at a rotational speed of one revolution per day, 50% submergence of discs, aeration rate of 1.0 vvm, and with a sucrose-containing medium, faithfully mimicked the intertidal estuarine habitat of these marine isolates, and supported biofilm formation and production of antimicrobial metabolites-in particular, actinomycin D by MS310. Onset of antibiotic production by MS310 occurs at 20 h in the RDBR compared to 55 h in a conventional stirred-tank bioreactor (STBR). Furthermore, peak antimicrobial activity is attained much earlier in the RDBR with MS310 (at 45 h) than that reported with a terrestrial strain of S. parvallus grown in a STBR (at 144 h). Peak antimicrobial activity of metabolites produced by MS1/7 and MS3/20 were also attained earlier in the RDBR (at 25 and 12 h, respectively) than in a STBR (at 80 and 28 h, respectively). Antibiotic synthesis in the three isolates, in general, appears to be associated with their growth. Overall, the RDBR may be considered the preferred alternative to the STBR for production of antimicrobials by biofilm-forming estuarine bacteria for its much higher surface/volume ratio, lower costs, and easy operability.