Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 15 de 15
Filter
Add more filters










Publication year range
1.
Heliyon ; 10(6): e27778, 2024 Mar 30.
Article in English | MEDLINE | ID: mdl-38509887

ABSTRACT

Micro-energy harvesting (MEH) is a technology of renewable power generation which is a key technology for hosting the future low-powered electronic devices for wireless sensor networks (WSNs) and, the Internet of Things (IoT). Recent technological advancements have given rise to several resources and technologies that are boosting particular facets of society. Many researchers are now interested in studying MEH systems for ultra-low power IoT sensors and WSNs. A comprehensive study of IoT will help to manage a single MEH as a power source for multiple WSNs. The popular database from Scopus was used in this study to perform a review analysis of the MEH system for ultra-low power IoT sensors. All relevant and important literature studies published in this field were statistically analysed using a review analysis method by VOSviewer software, and research gaps, challenges and recommendations of this field were investigated. The findings of the study indicate that there has been an increasing number of literature studies published on the subject of MEH systems for IoT platforms throughout time, particularly from 2013 to 2023. The results demonstrate that 67% of manuscripts highlight problem-solving, modelling and technical overview, simulation, experimental setup and prototype. In observation, 27% of papers are based on bibliometric analysis, systematic review, survey, review and based on case study, and 2% of conference manuscripts are based on modelling, simulation, and review analysis. The top-cited articles are published in 5 different countries and 9 publishers including IEEE 51%, Elsevier 16%, MDPI 10% and others. In addition, several MEH system-related problems and challenges are noted to identify current limitations and research gaps, including technical, modelling, economic, power quality, and environmental concerns. Also, the study offers guidelines and recommendations for the improvement of future MEH technology to increase its energy efficiency, topologies, design, operational performance, and capabilities. This study's detailed information, perceptive analysis, and critical argument are expected to improve MEH research's viable future.

2.
ACS Omega ; 8(33): 29959-29965, 2023 Aug 22.
Article in English | MEDLINE | ID: mdl-37636967

ABSTRACT

Nanomaterials (NMs) with structural, optical, and dielectric properties are called functional or smart materials and have favorable applications in various fields of material science and nanotechnology. Pure and Co-doped MgAl2O4 were synthesized by using the sol-gel combustion method. A systematic investigation was carried out to understand the effects of the Co concentration on the crystalline phase, morphology, and optical and dielectric properties of Co-doped MgAl2O4. X-ray diffraction confirmed the cubic spinel structure with the Fd3̅m space group, and there was no impurity phase, while the surface morphology of the samples was investigated by scanning electron microscopy. The dielectric properties of the synthesized material are investigated using an LCR meter with respect to the variation in frequency (1-2 GHz), and their elemental composition has been examined through the energy-dispersive X-ray technique. The existence of the metal-oxygen Mg-Al-O bond has been confirmed by Fourier transform infrared spectroscopy. The value of the dielectric constant decreases with the increasing frequency and Co concentration. The optical behaviors of the Co2+-doped MgAl2O4 reveal that the optical properties were enhanced by increasing the cobalt concentration, which ultimately led to a narrower band gap, which make them exquisite and suitable for energy storage applications, especially for super capacitors. This work aims to focus on the effect of cobalt ions in different concentrations on structural, optical, and dielectric properties.

3.
ACS Omega ; 8(13): 12372-12378, 2023 Apr 04.
Article in English | MEDLINE | ID: mdl-37033827

ABSTRACT

The low-temperature sintering of (Bi0.5Na0.5)TiO3-based ceramics can be achieved by sintering aid CuO. Piezoelectric ceramics (1 - x)[0.90(Bi0.5Na0.5)TiO3 - 0.10SrTiO3] - xCuO (BNT-ST-Cu) with x = 0, 0.01, 0.02, 0.03, and 0.04 were prepared through the mixed oxide route. A tetragonal structure was indexed for the undoped sample. Its structure was found to be changed to a pseudocubic when Cu was added. For undoped Cu samples, the sintering temperature (T s) for sufficient densification was 1160 °C. However, T s was reduced to 1090-1120 °C for Cu-added specimens. Field emission scanning electron microscopy (FE-SEM) showed a uniform and dense grain morphology for all samples. The maximum dielectric constant temperature (T m) was decreased with the doping concentration of Cu and applied frequency. The strain was increased with Cu concentration and had the maximum value of 500 pm/V for the sample x = 0.02 with symmetric and slim strain loops.

4.
Polymers (Basel) ; 15(2)2023 Jan 10.
Article in English | MEDLINE | ID: mdl-36679244

ABSTRACT

The appropriate combination of semiconducting polymer-inorganic nanocomposites can enhance the existing performance of polymers-only-based photovoltaic devices. Hence, polyaniline (PANI)/zinc oxide (ZnO) nanocomposites were prepared by combining ZnO nanoparticles with PANI in four distinct ratios to optimize their photovoltaic performance. Using a simple coating method, PANI, ZnO, and its nanocomposite, with varying weight percent (wt%) concentrations of ZnO nanoparticles, i.e., (1 wt%, 2 wt%, 3 wt%, and 4 wt%), were fabricated and utilized as an active layer to evaluate the potential for the high-power conversion efficiency of various concentrations, respectively. PANI/ZnO nanocomposites are characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-vis) absorption, energy dispersive X-ray (EDX), and I-V measurement techniques. The XRD analysis showed a distinct, narrow peak, which corresponds to the wurtzite ZnO (101) plane. The SEM analysis verified the production of the PANI/ZnO composite by demonstrating that the crystalline ZnO was integrated into the PANI matrix. The elemental composition was determined by energy dispersive X-ray analysis (EDX), which confirmed the existence of PANI and ZnO without any impurities, respectively. Using Fourier transform infrared (FTIR) spectroscopy, various chemical bonds and stretching vibrations were analyzed and assigned to different peaks. The bandgap narrowing with an increasing PANI/ZnO composition led to exceptional optical improvement. The I-V characterization was utilized to investigate the impact of the nanocomposite on the electrical properties of the PANI/ZnO, and various concentrations of ZnO (1 wt%, 2 wt%, 3 wt%, and 4 wt%) in the PANI matrix were analyzed under both light and dark conditions at an STC of 1.5 AM globally. A high PCE of 4.48% was achieved for the PANI/ZnO (3 wt%), which revealed that the conductivity of the PANI/ZnO nanocomposite thin films improved with the increasing nanocomposite concentration.

5.
Sci Rep ; 12(1): 9788, 2022 Jun 13.
Article in English | MEDLINE | ID: mdl-35697821

ABSTRACT

A four-level double lambda closed atomic configuration is considered to study the polarization plane rotation of the probe beam through cold as well as thermal Rb[Formula: see text] atomic medium by varying the spontaneously generated coherence (SGC). Magnetic field and strong coupling field are applied to the atomic configuration. The light-matter interaction leads to enhanced the magneto-optical rotation. The intensity of the applied fields plays promising role in the generation and enhancement of birefringence. It ultimately enhances the polarization plane rotation of the probe beam in the Doppler medium. In the presence of both SGC and Doppler broadening effects, the optical rotation and transmission of the weak light beam are modified and controlled as well, which have potential applications in magnetometery and laser frequency stabilization.

6.
Micromachines (Basel) ; 13(6)2022 Jun 20.
Article in English | MEDLINE | ID: mdl-35744589

ABSTRACT

The scientific interest in piezoelectric micro-energy harvesting (PMEH) has been fast-growing, demonstrating that the field has made a major improvement in the long-term evolution of alternative energy sources. Although various research works have been performed and published over the years, only a few attempts have been made to examine the research's influence in this field. Therefore, this paper presents a bibliometric study into low-cost PMEH from ambient energy sources within the years 2010-2021, outlining current research trends, analytical assessment, novel insights, impacts, challenges and recommendations. The major goal of this paper is to provide a bibliometric evaluation that is based on the top-cited 100 articles employing the Scopus databases, information and refined keyword searches. This study analyses various key aspects, including PMEH emerging applications, authors' contributions, collaboration, research classification, keywords analysis, country's networks and state-of-the-art research areas. Moreover, several issues and concerns regarding PMEH are identified to determine the existing constraints and research gaps, such as technical, modeling, economics, power quality and environment. The paper also provides guidelines and suggestions for the development and enhancement of future PMEH towards improving energy efficiency, topologies, design, operational performance and capabilities. The in-depth information, critical discussion and analysis of this bibliometric study are expected to contribute to the advancement of the sustainable pathway for PMEH research.

7.
Micromachines (Basel) ; 13(4)2022 Mar 25.
Article in English | MEDLINE | ID: mdl-35457819

ABSTRACT

During the last decade, countless advancements have been made in the field of micro-energy storage systems (MESS) and ambient energy harvesting (EH) shows great potential for research and future improvement. A detailed historical overview with analysis, in the research area of MESS as a form of ambient EH, is presented in this study. The top-cited articles in the field of MESS ambient EH were selected from the Scopus database, and based on articles published from 2010 to 2021, and the number of citations. The search for these top-cited articles was conducted in the third week of December 2021. Mostly the manuscripts were technical and contained an experimental setup with algorithm development (65%), whereas 27.23% of the articles were survey-based. One important observation was that the top 20 selected articles, which are the most-cited articles in the different journals, come from numerous countries of origin. This study revealed that the MESS integrated renewable energy sources (RESs) are an enhancement field of research for EH applications. On the basis of this survey, we hope to identify and solve research problems in the field of MESS and RESs integration, and provide suggestions for future developments for EH applications.

8.
Polymers (Basel) ; 14(8)2022 Apr 07.
Article in English | MEDLINE | ID: mdl-35458255

ABSTRACT

In this paper, we report on the synthesis-via the wet chemical precipitation route method-and thin film characteristics of inorganic semiconductor, cuprous oxide (Cu2O) nanoparticles, for their potential application in enhancing the humidity-sensing properties of semiconducting polymer poly(9,9-dioctylfluorene) (F8). For morphological analysis of the synthesized Cu2O nanoparticles, transmission electron microscope (TEM) and scanning electron microscope (SEM) micrographs are studied to investigate the texture, distribution, shape, and sizes of Cu2O crystallites. The TEM image of the Cu2O nanoparticles exhibits somewhat non-uniform distribution with almost uniform shape and size having an average particle size of ≈24 ± 2 nm. Fourier transformed infrared (FTIR) and X-ray diffraction (XRD) spectra are studied to validate the formation of Cu2O nanoparticles. Additionally, atomic force microscopy (AFM) is performed to analyze the surface morphology of polymer-inorganic (F8-Cu2O) nanocomposites thin film to see the grain sizes, mosaics, and average surface roughness. In order to study the enhancement in sensing properties of F8, a hybrid organic-inorganic (F8-Cu2O) surface-type humidity sensor Ag/F8-Cu2O/Ag is fabricated by employing F8 polymer as an active matrix layer and Cu2O nanoparticles as a dopant. The Ag/F8-Cu2O/Ag device is prepared by spin coating a 10:1 wt% solution of F8-Cu2O nanocomposite on pre-patterned silver (Ag) electrodes on glass. The inter-electrode gap (≈5 µm) between Ag is developed by photolithography. To study humidity sensing, the Ag/F8-Cu2O/Ag device is characterized by measuring its capacitance (C) as a function of relative humidity (%RH) at two different frequencies (120 Hz and 1 kHz). The device exhibits a broad humidity sensing range (27-86%RH) with shorter response time and recovery time, i.e., 9 s and 8 s, respectively. The present results show significant enhancement in the humidity-sensing properties as compared to our previously reported results of Ag/F8/Ag sensor wherein the humidity sensing range was 45-78%RH with 15 s and 7 s response and recovery times, respectively. The improvement in the humidity-sensing properties is attributed to the potential use of Cu2O nanoparticles, which change the hydrophobicity, surface to volume ratio of Cu2O nanoparticles, as well as modification in electron polarizability and polarity of the F8 matrix layer.

9.
Sensors (Basel) ; 22(5)2022 Mar 02.
Article in English | MEDLINE | ID: mdl-35271099

ABSTRACT

The Internet of Things (IoT) empowers the development of heterogeneous systems for various application domains using embedded devices and diverse data transmission protocols. Collaborative integration of these systems in the industrial domain leads to incompatibility and interoperability at different automation levels, requiring unified coordination to exchange information efficiently. The hardware specifications of these devices are resource-constrained, limiting their performance in resource allocation, data management, and remote process supervision. Hence, unlocking network capabilities with other domains such as cloud and web services is required. This study proposed a platform-independent middleware module incorporating the Open Platform Communication Unified Architecture (OPC UA) and Representational State Transfer (REST) paradigms. The object-oriented structure of this middleware allows information contextualization to address interoperability issues and offers aggregated data integration with other domains. RESTful web and cloud platforms were implemented to collect this middleware data, provide remote application support, and enable aggregated resource allocation in a database server. Several performance assessments were conducted on the developed system deployed in Raspberry Pi and Intel NUC PC, which showed acceptable platform resource utilization regarding CPU, bandwidth, and power consumption, with low service, update, and response time requirements. This integrated approach demonstrates an excellent cost-effective prospect for interoperable Machine-to-Machine (M2M) communication, enables remote process supervision, and offers aggregated bulk data management with wider domains.


Subject(s)
Cloud Computing , Internet of Things , Communication
10.
Sci Rep ; 12(1): 4381, 2022 03 14.
Article in English | MEDLINE | ID: mdl-35288583

ABSTRACT

In recent years, the nuclear power plant has received huge attention as it generates vast amounts of power at a lower cost. However, its creation of radioactive wastes is a major environmental concern. Therefore, the nuclear power plant requires a reliable and uninterrupted monitoring system as an essential part of it. Monitoring a nuclear power plant using wireless sensor networks is a convenient and popular practice now. This paper proposes a hybrid approach for monitoring wireless sensor networks in the context of a nuclear power plant in Bangladesh. Our hybrid approach enhances the lifespan of wireless sensor networks reducing power consumption and offering better connectivity of sensors. To do so, it uses both the topology maintenance and topology construction algorithms. We found that the HGETRecRot topology maintenance algorithm enhances the network lifetime compared to other algorithms. This algorithm increases the communication and sensing coverage area but decreases the network performance. We also propose a prediction model, based on linear regression algorithm, that predicts the best combination of topology maintenance and topology construction algorithms.


Subject(s)
Computer Communication Networks , Wireless Technology , Algorithms , Longevity , Nuclear Power Plants
11.
Molecules ; 26(21)2021 Oct 27.
Article in English | MEDLINE | ID: mdl-34770905

ABSTRACT

Surface plasmon (SP)-induced spectral hole burning (SHB) at the silver-dielectric interface is investigated theoretically. We notice a typical lamb dip at a selective frequency, which abruptly reduces the absorption spectrum of the surface plasmons polaritons (SPP). Introducing the spontaneous generated coherence (SGC) in the atomic medium, the slope of dispersion becomes normal. Additionally, slow SPP propagation is also noticed at the interface. The spectral hole burning dip is enhanced with the SGC effect and can be modified and controlled with the frequency and intensity of the driving fields. The SPP propagation length at the hole-burning region is greatly enhanced under the effect of SGC. A propagation length of the order of 600 µm is achieved for the modes, which is a remarkable result. The enhancement of plasmon hole burning under SGC will find significant applications in sensing technology, optical communication, optical tweezers and nano-photonics.

12.
Sensors (Basel) ; 21(15)2021 Jul 26.
Article in English | MEDLINE | ID: mdl-34372278

ABSTRACT

This paper reviews energy storage systems, in general, and for specific applications in low-cost micro-energy harvesting (MEH) systems, low-cost microelectronic devices, and wireless sensor networks (WSNs). With the development of electronic gadgets, low-cost microelectronic devices and WSNs, the need for an efficient, light and reliable energy storage device is increased. The current energy storage systems (ESS) have the disadvantages of self-discharging, energy density, life cycles, and cost. The ambient energy resources are the best option as an energy source, but the main challenge in harvesting energy from ambient sources is the instability of the source of energy. Due to the explosion of lithium batteries in many cases, and the pros associated with them, the design of an efficient device, which is more reliable and efficient than conventional batteries, is important. This review paper focused on the issues of the reliability and performance of electrical ESS, and, especially, discussed the technical challenges and suggested solutions for ESS (batteries, supercapacitors, and for a hybrid combination of supercapacitors and batteries) in detail. Nowadays, the main market of batteries is WSNs, but in the last decade, the world's attention has turned toward supercapacitors as a good alternative of batteries. The main advantages of supercapacitors are their light weight, volume, greater life cycle, turbo charging/discharging, high energy density and power density, low cost, easy maintenance, and no pollution. This study reviews supercapacitors as a better alternative of batteries in low-cost electronic devices, WSNs, and MEH systems.

13.
Micromachines (Basel) ; 12(6)2021 Jun 10.
Article in English | MEDLINE | ID: mdl-34200853

ABSTRACT

The promising chemical, mechanical, and electrical properties of silver from nano scale to bulk level make it useful to be used in a variety of applications in the biomedical and electronic fields. Recently, several methods have been proposed and applied for the small-scale and mass production of silver in the form of nanoparticles, nanowires, and nanofibers. In this research, we have proposed a novel method for the fabrication of silver nano fibers (AgNFs) that is environmentally friendly and can be easily deployed for large-scale production. Moreover, the proposed technique is easy for device fabrication in different applications. To validate the properties, the synthesized silver nanofibers have been examined through Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD). Further, the synthesized silver nanofibers have been deposited over sensors for Relative humidity (RH), Ammonia (NH3), and temperature sensing applications. The sensor was of a resistive type, and found 4.3 kΩ for relative humidity (RH %) 30-90%, 400 kΩ for NH3 (40,000 ppm), and 5 MΩ for temperature sensing (69 °C). The durability and speed of the sensor verified through repetitive, response, and recovery tests of the sensor in a humidity and gas chamber. It was observed that the sensor took 13 s to respond, 27 s to measure the maximum value, and took 33 s to regain its minimum value. Furthermore, it was observed that at lower frequencies and higher concentration of NH3, the response of the device was excellent. Furthermore, the device has linear and repetitive responses, is cost-effective, and is easy to fabricate.

14.
Sci Rep ; 10(1): 4828, 2020 Mar 16.
Article in English | MEDLINE | ID: mdl-32179797

ABSTRACT

This paper reports the potential application of cadmium selenide (CdSe) quantum dots (QDs) in improving the microelectronic characteristics of Schottky barrier diode (SBD) prepared from a semiconducting material poly-(9,9-dioctylfluorene) (F8). Two SBDs, Ag/F8/P3HT/ITO and Ag/F8-CdSe QDs/P3HT/ITO, are fabricated by spin coating a 10 wt% solution of F8 in chloroform and 10:1 wt% solution of F8:CdSe QDs, respectively, on a pre-deposited poly(3-hexylthiophene) (P3HT) on indium tin oxide (ITO) substrate. To study the electronic properties of the fabricated devices, current-voltage (I-V) measurements are carried out at 25 °C in dark conditions. The I-V curves of Ag/F8/P3HT/ITO and Ag/F8-CdSe QDs/P3HT/ITO SBDs demonstrate asymmetrical behavior with forward bias current rectification ratio (RR) of 7.42 ± 0.02 and 142 ± 0.02, respectively, at ± 3.5 V which confirm the formation of depletion region. Other key parameters which govern microelectronic properties of the fabricated devices such as charge carrier mobility (µ), barrier height (ϕb), series resistance (Rs) and quality factor (n) are extracted from their corresponding I-V characteristics. Norde's and Cheung functions are also applied to characterize the devices to study consistency in various parameters. Significant improvement is found in the values of Rs, n, and RR by 3, 1.7, and 19 times, respectively, for Ag/F8-CdSe QDs/P3HT/ITO SBD as compared to Ag/F8/P3HT/ITO. This enhancement is due to the incorporation of CdSe QDs having 3-dimensional quantum confinement and large surface-to-volume area. Poole-Frenkle and Richardson-Schottky conduction mechanisms are also discussed for both of the devices. Morphology, optical bandgap (1.88 ± 0.5 eV) and photoluminescence (PL) spectrum of CdSe QDs with a peak intensity at 556 nm are also reported and discussed.

15.
Micromachines (Basel) ; 7(10)2016 Sep 23.
Article in English | MEDLINE | ID: mdl-30404344

ABSTRACT

This paper presents a new method for a vibration-based piezoelectric energy harvesting system using a backtracking search algorithm (BSA)-based proportional-integral (PI) voltage controller. This technique eliminates the exhaustive conventional trial-and-error procedure for obtaining optimized parameter values of proportional gain (Kp), and integral gain (Ki) for PI voltage controllers. The generated estimate values of Kp and Ki are executed in the PI voltage controller that is developed through the BSA optimization technique. In this study, mean absolute error (MAE) is used as an objective function to minimize output error for a piezoelectric energy harvesting system (PEHS). The model for the PEHS is designed and analyzed using the BSA optimization technique. The BSA-based PI voltage controller of the PEHS produces a significant improvement in minimizing the output error of the converter and a robust, regulated pulse-width modulation (PWM) signal to convert a MOSFET switch, with the best response in terms of rise time and settling time under various load conditions.

SELECTION OF CITATIONS
SEARCH DETAIL
...