Effect of 3-Carene and the Micellar Formulation on Leishmania (Leishmania) amazonensis.

Leishmaniases are neglected tropical diseases caused by obligate intracellular protozoa of the genus Leishmania. The drugs used in treatment have a high financial cost, a long treatment time, high toxicity, and variable efficacy. 3-Carene (3CR) is a hydrocarbon monoterpene that has shown in vitro activity against some Leishmania species; however, it has low water solubility and high volatility. This study aimed to develop Poloxamer 407 micelles capable of delivering 3CR (P407-3CR) to improve antileishmanial activity. The micelles formulated presented nanometric size, medium or low polydispersity, and Newtonian fluid rheological behavior. 3CR and P407-3CR inhibited the growth of L. (L.) amazonensis promastigote with IC50/48h of 488.1 ± 3.7 and 419.9 ±1.5 mM, respectively. Transmission electron microscopy analysis showed that 3CR induces multiple nuclei and kinetoplast phenotypes and the formation of numerous cytosolic invaginations. Additionally, the micelles were not cytotoxic to L929 cells or murine peritoneal macrophages, presenting activity on intracellular amastigotes. P407-3CR micelles (IC50/72 h = 0.7 ± 0.1 mM) increased the monoterpene activity by at least twice (3CR: IC50/72 h >1.5 mM). These results showed that P407 micelles are an effective nanosystem for delivering 3CR and potentiating antileishmanial activity. More studies are needed to evaluate this system as a potential therapeutic option for leishmaniases.

Lyotropic liquid crystal mesophases as transdermal delivery systems for lipophilic drugs: A comparative study.

The present work aimed to evaluate different Liquid Crystal Mesophases (LCM) as transdermal drug delivery systems (TDDS) for nifedipine (NFD), a lipophilic drug model. The formulations composed of water, Citrus sinensis essential oil (CSEO), PPG-5-CETETH-20, and Olive oil ester PEG-7 were obtained and characterized by polarized light microscopy (PLM), rheology, small-angle x-ray scattering (SAXS), Fourier transform infrared coupled with an attenuated total reflection accessory (FTIR-ATR) and in vitro assays: bioadhesion, drug release, skin permeation, and retention tests. As a result, changes in component proportions led to several transparent viscous systems with an anisotropic profile. PLM and SAXS proved the presence of lamellar (S1), hexagonal (S3), and lamellar + hexagonal (S2) LCM, and rheology showed a high viscoelasticity profile. LCMs were able to adhere to the skin, and S2 achieved higher adhesion strength. NFD (5 mg/mL) has not modified the organization of LCMs. Results also showed that S3 promoted higher permeation and retention and higher disorganization of stratum corneum lipids, which is the main permeation-enhancing mechanism. Thus, the formulations obtained can carry and improve drug delivery through the skin and are promising TDDS for lipophilic drug administration, such as NFD.

Thermosensitive system formed by poloxamers containing carvacrol: An effective carrier system against Leishmania amazonensis.

The drugs used in the treatment of leishmaniasis show problems concerning side effects and toxicity. As a result, the search for new actives is necessary, and natural products like carvacrol - 5-isopropyl-2-methylphenol, become a relevant alternative. To enable the use of carvacrol as an antileishmanial agent, thermosensitive hydrogels were developed from poloxamer triblock copolymers 407 (P407) and 188 (P188). Carvacrol-free and carvacrol-containing hydrogels were obtained from P407 alone and from the mixture of P407 and P188. The hydrogels were subjected to Differential scanning calorimetry, Small-angle X-ray scattering, Scanning electron microscopy, and Rheology analysis. The activity of hydrogels and carvacrol isolated against promastigotes and intracellular amastigotes of Leishmania amazonensis and their cytotoxicity in mammalian cells was determined. The sol-gel transition temperature for the binary hydrogel containing carvacrol (HG407/188CA) was 37.04 ± 1.35 °C. HG407/188CA presented lamellar structure at temperatures of 25 °C and 37 °C. HG407/188CA and carvacrol presented IC50 against Leishmania amazonensis promastigotes of 18.68 ± 1.43 µg/mL and 23.83 ± 3.32 µg/mL, respectively, and IC50 against Leishmania amazonensis amastigotes of 35.08 ± 0.75 µg/mL and 29.32 ± 0.21 µg/mL, respectively. HG407/188CA reduced the toxicity of carvacrol in all mammalian cells evaluated, raising the CC50 in murine peritoneal macrophages from 40.23 ± 0.21 µg/mL to 332.6 ± 4.89 µg/mL, obtaining a Selectivity Index (SI) of 9.5 against 1.37 of the isolated carvacrol. HG407/188CA provided higher selectivity of carvacrol for the parasite. Thus, the binary hydrogel obtained may enable the use of carvacrol as a potential antileishmanial agent.

Chitosan-functionalized nanostructured lipid carriers containing chloroaluminum phthalocyanine for photodynamic therapy of skin cancer.

The objective of this study was to obtain optimized nanostructured lipid carriers (NLC) functionalized with chitosan containing chloroaluminum phthalocyanine (ClAlPc) as a photosensitizer. Initially, the optimization of the preparation method of the NLC was performed, where the influence of different surfactants such as PVA and Tween 80, as well as different solid lipids such as stearic acid and Glycerol Monostearate (GM) was evaluated. The formulation containing GM and PVA (NLC10) was considered promising. Following, by the adsorption method (NLC10q), the formulation was functionalized with chitosan and characterized. NLC10 and NLC10q presented sizes of 131.5 and 231.5 nm, and ZP of -24.30 and + 19.96 mV, respectively. The encapsulation efficiency of NLC10q was 96 %, higher than NLC10 (79 %). The formulations were able to promote significant cutaneous retention of ClAlPc, after 2 h and 4 h of the study, and showed to be non-toxic to fibroblasts (biocompatible). PDT in BF16-F10 melanoma resulted in reduced cell viability to 70 % and 50 % for NLC10 and NLCq, respectively. In view of the results obtained, NLC showed to be promising in the treatment of skin cancer through PDT. NLC10q showed higher encapsulation efficiency and stability than NLC10, but, contrary to what was expected, it presented lower photodynamic efficiency.

Microemulsions formed by PPG-5-CETETH-20 at low concentrations for transdermal delivery of nifedipine: Structural and in vitro study.

Nifedipine is a potent anti-hypertensive, which is poorly orally bioavailable on account of first-pass metabolism, short half-life, and low water solubility. This study aimed to develop a microemulsified system with low surfactant concentration and to evaluate the influence of microemulsion (ME) phase behavior on skin permeation of nifedipine, as drug model. Thereafter, MEs were obtained using PPG-5-CETETH-20, oleic acid, and phosphate buffer at pH 5.0. The selected MEs were isotropic, with droplet diameters less than 10 nm, polydispersity index < 0.25, and pH between 5.0 and 5.2. MEs presented low viscosity and Newtonian behavior. SAXS results confirmed bicontinuous and oil-in-water (o/w) MEs formation. The presence of the drug promoted only very slight modifications in the ME structure. The MEs presented ability to deliver nifedipine via the transdermal route when in comparison with the control. Nevertheless, the skin permeated and retained amounts from the o/w and bicontinuous formulations did not differ significantly. The ATR-FTIR demonstrated that both formulations promoted fluidization and disorganization of lipids and increased the drug diffusion and partition coefficients in the skin. In conclusion, PPG-5-CETETH-20 MEs obtained proved to be effective skin permeation enhancers, acting by rising the coefficients of partition and diffusion of the nifedipine in the skin.

Larvicidal formulation containing N-tosylindole: A viable alternative to chemical control of Aedes aegypti.

Aedes aegypti is currently a major public health problem. This mosquito is responsible for the spread of infectious diseases that have been causing epidemics worldwide. Surfactant-stabilized systems, such as microemulsions, liquid-crystalline precursors and liquid crystals, are promising sustained delivery formulations of hydrophilic and hydrophobic substances. These systems are biocompatible water-soluble reservoirs for N-tosylindole exhibiting biological activity against Aedes aegypti Linn. (Diptera: Culicidae) larvae. The ternary diagram displayed four regions: microemulsion (ME), liquid crystal (LC), emulsion (EM) and phase separation (PS). PLM and SAXS distinguished microemulsions, lamellar and hexagonal phase liquid crystals. The system had a lethal concentration of 50% (LC50 = 0.1 ppm, 0.36 µM) lower than pure N-tosylindole (0.24 ppm, 0.88 µM), which has limitations in aqueous media. Furthermore, the formulation displayed no toxicity to Artemia sp., a non-target organism. The system exhibited excellent larvicidal activity as an alternative to commercial larvicides that have shown resistance and toxicity to the environment by Ae. aegypti larvae due to prolonged use. In addition, a two-fold increase in potency was observed.

Microemulsion systems to enhance the transdermal permeation of ivermectin in dogs: A preliminary in vitro study.

This study aims to evaluate the influence of the phase behavior of microemulsions in the transdermal administration ("spot-on") of ivermectin, an antiparasitic drug widely used in the treatment of endoparasites and ectoparasites in dogs. In this regard, pseudoternary phase diagrams composed of water (aqueous phase), isopropyl myristate (oil phase), tween 80 (surfactant) and labrasol (cosurfactant) were obtained in a different surfactant: cosurfactant (S:CS) ratios. S:CS in 1:3 ratio presented a larger region of microemulsion formation and three microemulsions were selected from it and characterized. Subsequently, in vitro permeation and retention studies were conducted using canine skin as membrane. SAXS, rheology and conductivity data were employed to confirm the phase behavior of the microemulsions (w/o, bicontinuous or o/w). The cutaneous permeation and retention tests showed that the w/o microemulsion, followed by bicontinuous microemulsion, resulted in a higher amount of drug permeated through canine skin, suggesting better transdermal permeation. On the other hand, o/w microemulsion resulted in a higher amount of drug accumulated into the skin, suggesting better topical activity. Thus, it can be concluded that phase behavior of microemulsions influenced the drug permeation in the canine skin differently from other animal models. Microemulsions, especially w/o and bicontinuous, can be promising vehicles regarding the transdermal delivery of ivermectin.

In situ microemulsion-gel obtained from bioadhesive hydroxypropyl methylcellulose films for transdermal administration of zidovudine.

This study aims to develop in situ microemulsion-gel (ME-Gel) obtained from hydroxypropyl methylcellulose (HPMC) films for transdermal administration of Zidovudine (AZT). Firstly, HPMC films containing propylene glycol (PG) and eucalyptus oil (EO) were obtained and characterized. Later, a pseudo-ternary phase diagram composed of water, EO, tween 80 and PG was obtained and one microemulsion (ME) with a similar proportion of the film components was obtained. ME was transformed in ME-Gel by the incorporation of HPMC. Finally, HPMC films were hydrated with Tween 80 solution to yield in situ ME-Gel and its effect on AZT skin permeation was compared with HPMC film hydrated with water (F5hyd). The results showed that the ME and ME-Gel presented a droplet size of 16.79 and 122.13 µm, respectively, polydispersity index (PDI) < 0.39 and pH between 5.10 and 5.40. The incorporation of HPMC resulted in viscosity about 2 times higher than the use of ME. The presence of AZT did not alter the formulation properties. The in situ ME-Gel promoted a two-fold increase in the permeated amount of AZT compared to F5hyd. The results suggest that it was possible to obtain an ME-Gel in situ from HPMC films and that its effect on transdermal permeation of AZT was significant.

Skin permeation, biocompatibility and antitumor effect of chloroaluminum phthalocyanine associated to oleic acid in lipid nanoparticles.

The objective of this study was to develop and characterize lipid nanoparticles (LNs) containing chloroaluminum phthalocyanine (ClAlPc) to reduce the aggregation of the drug and improve its skin penetration and its antitumor effect. LNs were prepared and characterized by using stearic acid (SA) as solid lipid and oleic acid (OA) as liquid lipid in different proportions. in vitro and in vivo skin penetration was evaluated using modified Franz diffusion cells and fluorescence microscopy, respectively. in vitro biocompatibility and Photodynamic Therapy (PDT) were performed using L929-fibroblasts cell line and A549 cancer cell line and melanoma BF16-F10, respectively. OA promoted the increase in the encapsulation efficiency and drug loading, reaching values of 95.8% and 4%, respectively. The formulation with 40% OA (NLC 40) showed a significantly higher (p < 0.01) amount of drug retained in the skin compared to other formulations. All formulations developed were considered biocompatible. PDT evidenced the antitumor efficacy of NLC 40 with reduced cell viability for approximately 10% of cancer cells, demonstrating that the presence of OA in the NLC seems to potentialize this antitumor effect. PDT in BF16-F10 melanoma using NLC 40 resulted in a reduction in mean cell viability of approximately 99%. According to the results obtained, the systems developed may be promising for the incorporation of ClAlPc in the treatment of skin cancer by photodynamic therapy.

Third-Generation Transdermal Delivery Systems Containing Zidovudine: Effect of the Combination of Different Chemical Enhancers and a Microemulsion System.

This study aimed to examine the influence of the combination of chemical enhancers and a microemulsion on the transdermal permeation of zidovudine (AZT). Ethanol, 1,8-cineole, and geraniol were incorporated in a microemulsion. The droplet size, zeta potential, rheology, and SAXS analysis were performed. The permeation enhancer effect was evaluated using pig ear skin. Snake skin (Boa constrictor) treated with the formulations was also used as a stratum corneum model and studied by attenuated total reflectance-infrared spectroscopy. As a result, it was observed that the incorporation of the chemical enhancers promoted a decrease of the droplet size and some rheological modifications. The 1,8-cineole associated with the microemulsion significantly increased the permeated amount of AZT. Conversely, ethanol significantly increased the quantity of the drug retained in the skin. The probable mechanism for the cineole and ethanol effects was respectively: fluidization and increasing of the diffusion coefficient, and increasing of the partition coefficient. Surprising, geraniol + microemulsion drastically decreased both the permeated and the retained amount of AZT into the skin. Thus, the adequate association of microemulsion and chemical enhancers showed to be a crucial step to enable the topical or transdermal use of drugs.

Microemulsion Formulations for the Transdermal Delivery of Lapachol.

This project was carried out to investigate the feasibility of using microemulsions for transdermal delivery of lapachol. From the screening of surfactants and oils, a range of microemulsions were developed using oleic acid, a mixture of Cremophor EL and Tween 20 and water. The solubility of lapachol was determined in these ingredients and in the formulated microemulsions. The microemulsions were characterised using cross-polarising light microscopy, their electrical conductivity, pH, zeta potential and rheology were analysed, and they were also investigated using small-angle X-ray scattering and differential scanning calorimetry. Ex vivo studies were performed using porcine ear skin and Franz diffusion cells to investigate the permeation and retention of lapachol. Systems containing different concentrations of Cremophor EL (8.4-41.6%), Tween 20 (5.4-41.6%) and oleic acid (12-31.9%) are able to form microemulsions. Lapachol was delivered more effectively through the skin from all of the microemulsions tested than by the control (oleic acid). These studies indicated that microemulsions incorporating lapachol were formed successfully and that these enhanced drug delivery and retention in the skin. Microemulsion systems may, therefore, provide promising vehicles for percutaneous delivery of lapachol.

Antimicrobial activity of polymyxin-loaded solid lipid nanoparticles (PLX-SLN): Characterization of physicochemical properties and in vitro efficacy.

Antimicrobial resistance is a current public health concern, limiting the available therapeutic options used for the treatment of common bacterial infections. The development of new drug entities via biotechnological processes is however expensive and time-consuming. Therefore, old antimicrobial agents have been recovered for clinical use. An example of these drugs is polymyxin, which is known for its serious adverse side effects, such as nephrotoxicity, neurotoxicity and promotion of skin pigmentation. To overcome these limitations, the use of biodegradable nanoparticles has been proposed to allow site-specific targeting, increasing the drug's bioavailability and decreasing its side effects. The aim of this work was the development of an optimized pharmaceutical formulation composed of solid lipid nanoparticles (SLN) loading polymyxin B sulphate (PLX) for the treatment of bacterial infections. The PLX-loaded SLN were produced by a double emulsion method (w/o/w), obtaining particles with a mean size of approximately 200nm, polydispersity of 0.3 and zeta potential of -30mV. The encapsulation efficiency reached values above 90% for all developed formulations. SLN remained stable for a period of 6months of storage at room temperature. The occlusive properties of the SLN was shown to be dependent on the type of lipid, while the antimicrobial properties of PLX-loaded SLN were effective against resistant strains of Pseudomonas aeruginosa. Results from the differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and small angle X-ray scattering (SAXS) analyses confirmed the crystallinity of the inner SLN matrices, suggesting the capacity of these particles to modify the release profile of the loaded drug.

Structural and Thermal Behavior of Meglumine-Based Supra-Amphiphiles in Bulk and Assembled in Water.

Supra-amphiphiles are a new class of building blocks that are fabricated by means of noncovalent forces. In this work, we studied the formation of supra-amphiphiles by combining hydrophilic meglumine (MEG) with hydrophobic maleated castor oils (MACO). Spectroscopic analysis demonstrated that ionic interactions are the main driving force in the fabrication of these materials. Subsequently, supra-amphiphile/water systems were examined for their structure and water behavior by polarized optical microscopy (POM), small-angle X-ray scattering (SAXS), and differential scanning calorimetry (DSC). Micellar and lamellar liquid crystalline phases were observed. Finally, we observed that the supra-amphiphiles produced using an excess of MEG retain a large amount of water. As bound water plays an important role in biointerfacial interactions, we anticipate that these materials will display a pronounced potential for biomedical applications.

Evaluation of Microemulsion and Lamellar Liquid Crystalline Systems for Transdermal Zidovudine Delivery.

This study proposed to investigate and to compare colloidal carrier systems containing Zidovudine (3'-azido-3'-deoxythymidine) (AZT) for transdermal administration and optimization of antiretroviral therapy. Microemulsion (ME) and lamellar phase (LP) liquid crystal were obtained and selected from pseudoternary diagrams previously developed. Small-angle X-ray scattering and rheology analysis confirmed the presence of typical ME and liquid crystalline structures with lamellar arrangement, respectively. Both colloidal carrier systems, ME, and LP remained stable, homogeneous, and isotropic after AZT addition. In vitro permeation study (using pig ear skin) showed that the amount of permeated drug was higher for ME compared to the control and LP, obtaining a permeation enhancing effect on the order of approximately 2-fold (p < 0.05). Microscopic examination after in vivo skin irritation studies using mice suggested few histological changes in the skin of animals treated with the ME compared to the control group (hydrogel). Thus, ME proved to be adequate and have promising effects, being able to promote the drug permeation without causing apparent skin irritation. On the order hand, LP functioned as a drug reservoir reducing AZT partitioning into the skin.

Rheological, mechanical and adhesive properties of surfactant-containing systems designed as a potential platform for topical drug delivery.

In the last few decades, nanotechnology has led to an advance in the development of topical drug delivery. Nanostructured drug delivery systems enable the compartmentalization of drugs in restricted environments, modifying the release profile and maintaining the required drug concentration for prolonged periods at the site of action and/or absorption. The development of nanostructured systems containing surfactants has evolved rapidly. Mixtures of surfactant, oil and water can self-associate to form structures, such as microemulsions and liquid crystal phases, which can be exploited as drug delivery systems because their nanostructured organization can control drug release. Therefore, the purpose of this study was to assess the potential of systems containing polyoxypropylene (5) polyoxyethylene (20) cetyl ether as surfactant, oleic acid or mineral oil as the oily phase, and water to be used as a platform in the development of topical drug delivery systems. Physicochemical characterization of the systems was performed by polarized light microscopy (PLM), small-angle X-ray scattering (SAXS), rheological tests and texture profile analysis. The ternary phase diagrams showed that combinations of surfactant/mineral oil/water and surfactant/oleic acid/water could form various thermodynamically stable structures, such as microemulsions and liquid crystals. The oily phases, oleic acid and mineral oil, changed the rheological, mechanical and adhesive properties of systems containing polyoxypropylene (5) polyoxyethylene (20) cetyl ether.

Surfactant systems for nasal zidovudine delivery: structural, rheological and mucoadhesive properties.

OBJECTIVES: Zidovudine is the antiretroviral drug most frequently used for the treatment of AIDS. Although its effectiveness is recognized, it undergoes extensive first-pass metabolism and exhibits poor oral bioavailability. The nasal route is an option for enhanced therapeutic efficacy and to reduce the extent of the first-pass effect. There are some mechanisms that limit intranasal absorption, such as mucociliary clearance, which rapidly removes the formulation from the nasal cavity. To improve the nasal residence time of zidovudine on the nasal mucosa, we aimed to develop a mucoadhesive surfactant system for zidovudine nasal administration. METHODS: Systems composed of PPG-5-CETETH-20 as surfactant, oleic acid and water were characterized by polarized light microscopy, small-angle X-ray scattering and rheological measurements. Mucoadhesion was investigated by phase behaviour studies, rheological synergism and mucoadhesive strength determination. KEY FINDINGS: Results indicate that the original formulations were microemulsions that displayed phase transition to a lamellar phase when brought into contact with aqueous nasal simulated mucus. The phase transition was accompanied by an increase in system elasticity and, irrespective of phase behaviour, all the systems showed a good mucoadhesive force. Thus, a viscous and mucoadhesive liquid crystalline matrix could be formed when the formulations were in contact with simulated mucus, which may prolong the residence time of zidovudine in the nasal cavity. CONCLUSIONS: These findings indicate a potentially useful system for nasal administration of zidovudine.

A poloxamer/chitosan in situ forming gel with prolonged retention time for ocular delivery.

The aim of the present work was to obtain an ophthalmic delivery system with improved mechanical and mucoadhesive properties that could provide prolonged retention time for the treatment of ocular diseases. For this, an in situ forming gel comprised of the combination of a thermosetting polymer, poly (ethylene oxide)-poly (propylene oxide)-poly (ethylene oxide) (PEO-PPO-PEO, poloxamer), with a mucoadhesive agent (chitosan) was developed. Different polymer ratios were evaluated by oscillatory rheology, texture and mucoadhesive profiles. Scintigraphy studies in humans were conduced to verify the retention time of the formulations developed. The results showed that chitosan improves the mechanical strength and texture properties of poloxamer formulations and also confers mucoadhesive properties in a concentration-dependent manner. After a 10-min instillation of the poloxamer/chitosan 16:1 formulation in human eyes, 50-60% of the gel was still in contact with the cornea surface, which represents a fourfold increased retention in comparison with a conventional solution. Therefore, the developed formulation presented adequate mechanical and sensorial properties and remained in contact with the eye surface for a prolonged time. In conclusion, the in situ forming gel comprised of poloxamer/chitosan is a promising tool for the topical treatment of ocular diseases.