Impact of Novel Varietal and Regional Differences on Cotton Fiber Quality Characteristics.

Modernization and the global fashion market demand continuous improvements in upland cotton cultivars (Gossypium hirustum L.) to meet these improved fiber characteristics (fiber length, fiber strength, micronaire) requirements. Researchers have centered their efforts on improved fiber quality; however, the efforts are not immediately supporting the textile sector. The daily mean and temperature amplitude fluctuation affect cotton yield and fiber characteristics. This study analyzed four newly developed cotton varieties in two cotton regions for fiber characteristics' variations. It was observed that cotton fiber quality characteristics (fiber length, uniformity, strength, and micronaire) are impacted in diverse ways. Fiber quality is mainly affected by the genotype and environmental conditions, e.g., weather conditions, irrigation management, fertilization, and cultural practices. The Khanewal region had shown better fiber characteristics than the Multan region, whereas cotton variety CIM-785 had better fiber characteristics in both regions.

Synthesis of diglycolic acid functionalized core-shell silica coated Fe3O4 nanomaterials for magnetic extraction of Pb(II) and Cr(VI) ions.

Amine-terminated core-shell silica coated magnetite nanoparticles were functionalized with diglycolic acid for the first time to create acid moiety on the surface of the nanoparticles. The formation of magnetite nanoparticles was scrutinised through XRD, SEM, EDS, TEM, VSM and FTIR spectroscopy. The BET surface area of nano-sorbent was found to be 4.04 m2/g with pore size 23.68 nm. These nanomaterials were then utilized to remove the Pb(II) and Cr(VI) ions from their aqueous media and uptake of metal ions was determined by atomic absorption spectroscopy (AAS). A batch adsorption technique was applied to remove both ions at optimised pH and contact time with maximum adsorption efficiency for Pb(II) ions at pH 7 while for Cr(VI) ions at pH 3. Adsorption mechanism was studied using Langmuir and Freundlich isotherms and equilibrium data fitted well for both the isotherms, showing complex nature of adsorption comprising both chemisorption as well as physio-sorption phenomena. The nanosorbents exhibited facile separation by applying external magnetic field due to the ferrimagnetic behaviour with 31.65 emu/g saturation magnetization. These nanosorbents were also found to be used multiple times after regeneration.

Facile Solutions to the Problems Associated with Chemical Information and Mathematical Symbolism While Using Machine Translation Tools.

Advances in computer-aided translation technology have made tremendous progress in accuracy in the past few years. Chemical Abstracts Service of the American Chemical Society summarizes scientific works from more than 50 languages and allows the users to search papers in nine selected languages. Currently, only the abstracts are rendered into English by human experts or by machine translation because full text translation of millions of articles is beyond the human capacity today. An English translation of a research paper, scientific book, or patent is often required for research, data mining, and for historical purposes from various foreign languages. Many fundamental papers in chemistry, quantum chemistry, physics, and mathematics contain a significant number of chemical or mathematical equations. One of the major known problems in machine translation of such symbolically dense texts is incorrect or meaningless output. This article describes how to optimize the existing machine translation tools to read foreign language papers embedded with chemical/mathematical equations. German and French languages have been selected for illustrative purposes for English translation. Direct upload of text with extensive symbolism is possible with certain services, but this also occasionally produces erroneous rendition into English. A facile solution to the associated problems with embedded equations and mathematical formulas is replacing the equations and notations with "dummy" variables. The placeholder or dummy symbols can be removed after translation, and the original equations are substituted again. This approach, which can be automated in future, relies on the idea that chemical formulas and mathematical notations are universal. Following the guidelines in the article, excellent translations can be produced from a text having interspersed equations and chemical symbols.

Is Machine Translation a Reliable Tool for Reading German Scientific Databases and Research Articles?

A significant number of published databases and research papers exist in foreign languages and remain untranslated to date. Important sources of primary scientific information in German are Beilstein Handbuch der Organischen Chemie, Gmelin Handbuch der Anorganischen Chemie, Landolt-Börnstein Zahlenwerte und Funktionen, Houben-Weyl Methoden der Organischen Chemie, fundamental research papers, and patents. Although Reaxys has acquired Beilstein and Gmelin, many original references are still in German since 1770s, and the information presented in printed and online versions is often not duplicated. To read these resources, either costly professional translation services are needed or a reading knowledge of German has to be acquired. A convenient approach is to utilize machine translation for reading German texts; however, there is a question of translation reliability. In this work, several different platforms that employ neural network for machine translation (NMT) were tested for translation capability of scientific German. From a preliminary survey, Google Translate and DeepL were finalized for further studies (German to English). Excerpts from German documents spanning more than a century have been carefully chosen from standard works. DeepL Translator and Google Translate were found to be reliable for converting German scientific literature into English for a wide variety of technical passages. As a benchmark, human and machine translations are compared for complex sentences from old literature and a recent publication. Care and intuition should be used before relying on machine translation of methods and directions in general. Reagent addition (to or from) may be inverted in some synthetic procedures using machine translations.

Probing the potential of polyester for CO2 capture.

Global warming, the major environmental issue confronted by humanity today, is caused by rising level of green house gases. Carbon capture and storage technologies offer potential for tapering CO2 emission in the atmosphere. Adsorption is believed to be a promising technology for CO2 capture. For this purpose, a polyester was synthesized by polycondensation of 1,3,5-benzenetricarbonyl trichloride and cyanuric acid in pyridine and dichloromethane mixture. The polymer was then characterized using FT-IR, TGA, BET surface area and pore size analysis, FESEM and CO2 adsorption measurements. The CO2 adsorption capacities of the polyester were evaluated at a pressure of 1bar and two different temperatures (273 and 298K). The performance of these materials to adsorb CO2 at atmospheric pressure was measured by optimum CO2 uptake of 0.244 mmol/g at 273K. The synthesized polyester, therefore, has the potential to be exploited as CO2 adsorbent in pre-combustion capture process.

Nanoprotective Layer-by-Layer coatings with epoxy components for enhancing abrasion resistance: toward robust multimaterial nanoscale films.

Layer-by-Layer (LbL) assembled films offer many interesting applications (e.g., in the field of nanoplasmonics), but are often mechanically feeble. The preparation of nanoprotective films of an oligomeric novolac epoxy resin with poly(ethyleneimine) using covalent LbL-assembly is described. The film growth is linear, and the thickness increment per layer pair is easily controlled by varying the polymer concentration and/or the adsorption times. The abrasion resistance of such cross-linked films was tested using a conventional rubbing machine and found to be greatly enhanced in comparison to that of classic LbL-films that are mostly assembled through electrostatic interactions. These robust LbL-films are then used to mechanically protect LbL-films that would completely be removed by a few rubbing cycles in the absence of a protective coating. A 45 nm thick LbL-film composed of gold nanoparticles and poly(allylamine hydrochloride) was chosen as an especially weak example for a functional multilayer system. The critical thickness for the protective LbL-coatings on top of the weak multilayer was determined to be about 6 layer pairs corresponding to about only 10 nm. At this thickness, the whole film withstands at least 25 abrasion cycles with a reduction of the total thickness of only about 2%.

Synthesis, morphology, and properties of self-assembled nanostructured aramid and polystyrene blends.

Aramid (Ar), produced from the reaction of aromatic diamines and diacid chloride, was reactively compatibilized with amino-functionalized polystyrene (APS) to explore blend morphology and interfacial cohesion. Two blend systems, Ar/PS and Ar/APS, were investigated over a range of pristine polystyrene (PS) or modified APS ratios. Morphology and thermal and mechanical properties were probed to evaluate the effect of amine units of APS on the compatibility with Ar. π-π stacking interactions in tandem with the random distribution of graft attachment locations and polydispersity of graft length in Ar-g-APS copolymer, aided merger of unreacted chains to drive molecular self-assembly process thus fortifying the nanostructured blends. Considerable augmentation of the blend morphology and thermal stability was achieved by incorporation of reactivity into Ar/APS system. A 20 wt % APS-containing blend was found to demonstrate optimum mechanical reinforcement, complemented by the optimal, thermal, and morphological profiles of the same blend. Future prospects are envisaged.