Clinical outcomes and hospital length of stay in 2,756 elderly patients with hip fractures: a comparison of surgical and non-surgical management.

INTRODUCTION: The purpose of this study was to compare the clinical outcomes of elderly hip fracture patients who received surgical treatment with those who received non-surgical treatment. METHODS: This retrospective study involved 2,756 elderly patients with hip fractures who were admitted over a six-year period. The patients' biodata, complications, ambulatory status at discharge and length of hospital stay were obtained from the institution's hip fracture registry. RESULTS: Among the 2,756 hip fracture patients, 2,029 (73.6%) underwent surgical intervention, while 727 (26.4%) opted for non-surgical intervention. The complication rate among the patients who underwent surgical intervention was 6.6%, while that among the patients who underwent non-surgical intervention was 12.5% (p < 0.01). The mean length of hospital stay for the surgical and non-surgical hip fracture patients was 15.7 days and 22.4 days, respectively (p < 0.01). CONCLUSION: Surgical management of hip fractures among the elderly is associated with a lower complication rate, as well as a reduced length of hospital stay.

Alignment Analyses in the Varus Osteoarthritic Knee Using Computer Navigation.

Osteoarthritic (OA) knees with severe extension varus deformity seem to have correspondingly more severe flexion varus, especially beyond a certain tibiofemoral angle. Clinical measurement of flexion varus and fixed flexion deformity (FFD), which had been difficult to perform because of the spatial alignment of the knee in flexion, was recently made possible with computer navigation. We conducted a study to evaluate the relationship of extension and flexion varus in OA knees and to determine whether severity of FFD in the sagittal plane correlates with severity of coronal plane varus deformity. The study included 317 consecutive cases of computer-navigated total knee arthroplasty performed on OA knees with varus deformities. Three sets of values were extracted from the navigation data: varus angle at maximal knee extension, 90° knee flexion, and maximal knee extension. Correlation analyses were performed for extension and flexion varus, FFD, and coronal plane deformity. OA knees with extension varus of more than 10° had an incremental likelihood of more severe flexion varus. When the extension varus angle exceeded 20°, probability became almost certainty. There was no correlation between FFD and coronal plane varus deformity.

The application of minimally invasive surgical techniques. Part I: total hip arthroplasty.

Traditional surgical approaches often involve making large skin incisions and extensively dissecting healthy tissue to access diseased anatomy. Obviously more desirable is to make smaller incisions and more focused dissections and achieve the same postsurgical outcomes. Minimally invasive surgery (MIS) is gaining popularity in many orthopedic fields, but MIS techniques are not without risk. Continued use of these techniques is a topic of debate. If satisfactory alignment is satisfactory with MIS, and if the complication rates of MIS are similar to those of traditional approaches, it seems sensible to consider the less invasive approaches to enable earlier patient recovery and improve cosmesis. Skeptics claim that there is no advantage in using MIS over time-tested approaches and are concerned that MIS approaches are being implemented before being properly subjected to peer review.

The application of minimally invasive surgical techniques. Part II: total knee arthroplasty.

Traditional surgical approaches often involve making large skin incisions and extensively dissecting healthy tissue to access diseased anatomy. Obviously more desirable is to make smaller incisions and more focused dissections and achieve the same postsurgical outcomes. Minimally invasive surgery (MIS) is gaining popularity in many orthopedic fields, but MIS techniques are not without risk. Continued use of these techniques is a topic of debate. If alignment is satisfactory with MIS, and if the complication rates of MIS are similar to those of traditional approaches, it seems sensible to consider the less invasive approaches to enable earlier patient recovery and improve cosmesis. Skeptics claim that there is no advantage in using MIS over time-tested approaches and are concerned that MIS approaches are being implemented before being properly subjected to peer review.

Applying computer-assisted navigation techniques to total hip and knee arthroplasty.

Appropriate implant alignment is a major goal of total joint arthroplasty. Obtaining appropriate alignment typically involves making intraoperative decisions in response to visual and tactile feedback. Integrated computer-based systems provide the option of continuous real-time feedback and offer the potential to decrease intraoperative errors while enhancing the surgical learning experience. Computer-assisted orthopedic surgery helps the surgeon perform both intraoperative and postoperative technical audits of implant alignment. Improving implant alignment can be correlated with improved long-term clinical outcomes. However, despite emerging data, many surgeons remain wary of computer-assisted orthopedic surgery.

Total hip arthroplasty in above-knee amputees: a case report.

There are previous case reports in the literature that describe total knee and total hip arthroplasty (THA) in below-knee amputees, but we could find no case reports on above-knee amputees (AKAs) who have severe osteoarthritis of the hip. We present a case involving an AKA who developed severe osteoarthritis of the ipsilateral hip. Out patient underwent THA with a satisfactory postoperative outcome. Technical considerations for AKAs undergoing THA are also reviewed.

Massive wear and metallosis of an Acetabular Cup System presenting as pseudodislocation.

In primary and revision total hip arthroplasty (THA), the acetabular component continues to pose greater challenges than the femoral component. Numerous factors lead to polyethylene wear, which subsequently affects primary THA survival. Progressive polyethylene wear is associated with the occurrence of osteolysis, especially overlying the acetabulum, which can lead to component loosening and subsequent revision. Polyethylene failure usually manifests as massive liner wear up to the metal shell, fracture of the liner, or a combination of both. There is often a small amount of metallosis associated with this pathology. To our knowledge, massive wear of the acetabular metal shell, however, has not previously been reported in the literature. This article describes a case of massive wear through a polyethylene liner and the acetabular metal shell of an Acetabular Cup System (DePuy, Leeds, United Kingdom) that presented as an apparent dislocation 13 years following the index operation. The pseudodislocation was intraoperatively found to be penetration of the femoral head through the acetabular shell. The acetabular component was consequently revised to a larger cementless cup. The femoral component was mechanically stable and required no revision. Patients with long-standing Acetabular Cup System THA may experience acetabular metal shell wear-through phenomena presenting as a pseudodislocation, and this possibility should be taken into consideration during preoperative planning.

Does stress shielding occur with the use of long-stem prosthesis in total knee arthroplasty?

A retrospective study conducted to evaluate the possible occurrence of stress shielding with the use of long-stem tibial prosthesis in total knee arthroplasty. Forty-one patients were reviewed (twenty-three standard prosthesis, eighteen long-stem prosthesis) and forty-one unoperated knee of the contralateral limb). Patients underwent bone mineral density assessment with a dual-energy X-ray absorptiometry (DEXA) bone densitometer for the hip and bilateral knees. The mean time interval between surgery and the DEXA assessment was 87.7 months. There was no significant statistical difference (P > 0.05) in the bone mineral density patterns of the tibia with the use of either standard or long-stem prosthesis. The utilization of the long-stem prosthesis to off-load the tibia is not associated with any significant bone mineral density changes or stress shielding.

Patellar reconstruction using distal femoral autograft in a patellectomized patient undergoing total knee arthroplasty.

Patellectomized patients have less satisfactory clinical outcomes after total knee arthroplasty because of a decreased extensor mechanism efficiency and potential instability attributable to loss of anterior restraint. We report a patient, with a prior history of patellectomy, who underwent simultaneous patellar reconstruction using distal femoral autograft during the total knee arthroplasty. The patient has been followed up for 24 months with excellent postoperative knee scores with radiographically established graft viability.

Total hip arthroplasty for ankylosed hip secondary to heterotopic ossification.

Heterotopic ossification (HO) secondary to traumatic brain injury occurs at various sites and most commonly at the elbow, shoulder, and hip. There are few published reports on the assessment and surgical resection techniques of HO. A complete preoperative physical examination and radiologic assessment with a computed tomographic scan are important for the thorough evaluation of a patient. We describe a patient with neurogenic HO of the hip secondary to traumatic brain injury who underwent a total hip arthroplasty (THA). In selected patients with hip HO, THA supplemented with postoperative radiotherapy and indomethacin prophylaxis can facilitate progressive functional movements of the hip. To our knowledge, there is no report in the English literature of a THA being preformed for HO.

Effect of anesthesia type on limb length discrepancy after total hip arthroplasty.

A retrospective study of 132 patients (63 spinal anesthesia and 69 general anesthesia) undergoing total hip arthroplasty was performed by 4 fellowship-trained adult reconstructive surgeons to determine the influence of anesthesia type on postoperative limb length and medial offset. Limb length discrepancy occurred in 87.0% of patients who received regional anesthesia as opposed to 47.6% patients who had general anesthesia (P<.001). Differences in postoperative medial offset measurements between the 2 groups were not statistically significant. It was concluded that surgeons operating on patients who receive regional anesthesia should supplement intraoperative tests for assessing hip stability with meticulous preoperative templating to avoid overlengthening the operative limb.

Failure of constrained acetabular liner without metal ring disruption.

Constrained acetabular liners can fail leading to recurrent dislocation. Failure can occur at any of the five possible interfaces: bone-acetabular shell, acetabular shell-constrained liner insert, constrained liner insert-bipolar head, bipolar head- femoral head and femoral head-trunion. We report a patient who presented with dissociation of the cemented Osteonics acetabular constrained liner (Stryker-Howmedica-Osteonics, Rutherford, New Jersey). The failure interface was at the factory pre-assembled constrained liner insert-bipolar head without any locking ring failure; instead there was deformation of the constrained liner insert's polyethylene rim, which facilitated dissociation. To our knowledge, there are no previous reports of such a failure mode pertaining to this type of constrained liner. Constrained acetabular liners are indicated during primary or revision total hip arthroplasty for patients who are at high risk for dislocations or who have had recurrent dislocations. Failure rates (typically recurrent dislocation) range from 4% to 29% at mid-term follow-up. The first report on the Osteonics acetabular constrained liner was published in 1994. Failures have been reported previously to occur at surgically controllable interfaces, such as the acetabular shell from the bony surface and the constrained liner insert from the acetabular metal shell, and have been attributable to excessive constraint or improper technique. All dissociations pertaining to factory-preassembled component interfaces have been attributed to breakage of the locking ring. This article presents the first case of disengagement of the tripolar constrained liner without disruption of the locking ring.

Surgical challenges in complex primary total hip arthroplasty.

Complex primary total hip arthroplasty (THA) is defined as primary THA in patients with compromised bony or soft-tissue states, including but not limited to dysplastic hip, ankylosed hip, prior hip fracture, protrusio acetabuli, certain neuromuscular conditions, skeletal dysplasia, and previous bony procedures about the hip. Intraoperatively, provisions must be made for the possible use of modular implants and/or bone grafts. In this article, we review the principles of preoperative, intraoperative, and postoperative management of patients requiring a complex primary THA.

Fixation systems of greater trochanteric osteotomies: biomechanical and clinical outcomes.

The development of cerclage systems for fixation of greater trochanteric osteotomies has progressed from monofilament wires to multifilament cables to cable grip and cable plate systems. Cerclage wires and cables have various clinical indications, including fixation for fractures and for trochanteric osteotomy in hip arthroplasty. To achieve stable fixation and eventual union of the trochanteric osteotomy, the implant must counteract the destabilizing forces associated with pull of the peritrochanteric musculature. The material properties of cables and cable grip systems are superior to those of monofilament wires; however, potential complications with the use of cables include debris generation and third-body polyethylene wear. Nevertheless, the cable grip system provides the strongest fixation and results in lower rates of nonunion and trochanteric migration. Cable plate constructs show promise but require further clinical studies to validate their efficacy and safety.

Massive femoral osteolytic lesion secondary to disengagement of a total knee tibial locking pin: case report.

The Anatomic Modular Knee (AMK; Depuy, Warsaw, Ind) was one of the first designs to incorporate a modular locking mechanism for the tibial insert; fixation was secured using a screw-in tibial tray-locking pin. This case report describes a patient who presented with instability and worsening knee pain 15 years following a primary total knee arthroplasty using the AMK prosthesis. Radiographs and intraoperative assessment revealed proximal migration of the tibial tray-locking pin into the medial femoral condyle resulting in a large osteolytic defect.

Clinical outcome of total hip arthroplasty using the normalized and proportionalized femoral stem with a minimum 20-year follow-up.

Currently, there are several femoral stem designs available for use, but few have an extended track record. We have previously reported on 10- and 15-year outcome studies of total hip arthroplasty (THA) using a cemented normalized and proportionalized femoral stem from a single surgeon series. This is a follow-up study reporting the minimum 20-year outcome of this femoral stem design. The study began with THA performed in a consecutive series of 184 patients; stem fixation was achieved using first-generation cementing techniques. The overall early complication rate was 10%. There were 23 patients (31 hips) who had been followed-up for a minimum 20-year period (average 21.3 years). Mean d'Aubigne and Postel scores improved from 5.9 to 11.3; mean Harris hip scores improved from 43.8 to 92.8. Kaplan-Meier survivorship was 93% at 20 years (95% confidence interval); there were no stem failures. The use of a cemented normalized and proportionalized femoral stem in primary THA provides satisfactory long-term clinical and radiological outcomes in patients.

Multidisciplinary management of orthopedic patients with sickle cell disease.

With pharmacological treatment, the lifespan of the patient with sickle cell disease can be extended to the sixth decade. Currently the only curative therapy for sickle cell disease is hemopoietic cell transplantation, which is still undergoing technical refinement. Most patients can be expected to undergo at least one orthopedic surgical procedure in their lifetime. Multidisciplinary management of orthopedic patients with sickle cell disease will decrease the overall complication rates and improve clinical outcomes.

Midterm results of primary total knee arthroplasty using a dished polyethylene insert with a recessed or resected posterior cruciate ligament.

Use of a dished polyethylene insert in 114 total knee arthroplasties, all with the posterior cruciate ligament resected or recessed, was retrospectively studied. Patients were evaluated at a mean follow-up of 8.3 years. Mean range of motion increased from 92 degrees to 111 degrees . Mean Knee Society pain and function scores increased from 35.2 and 39.7 to 91.3 and 74.7, respectively. WOMAC scores improved significantly in each category evaluated, including pain, stiffness, and physical function. Kaplan-Meier survivorship was 95% at 10 years (95% confidence interval, 82%-99%). The use of a dished polyethylene insert in primary total knee arthroplasty provides good to excellent midterm results regardless of whether the posterior cruciate ligament is recessed or sacrificed.