Urban mining from biomass, brine, sewage sludge, phosphogypsum and e-waste for reducing the environmental pollution: Current status of availability, potential, and technologies with a focus on LCA and TEA.

Rapid industrialization, improved standards of living, growing economies and ever-increasing population has led to the unprecedented exploitation of the finite and non-renewable resources of minerals in past years. It was observed that out of 100 BMT of raw materials processed annually only 10% is recycled back. This has resulted in a strenuous burden on natural or primary resources of minerals (such as ores) having limited availability. Moreover, severe environmental concerns have been raised by the huge piles of waste generated at landfill sites. To resolve these issues, 'Urban Mining' from waste or secondary resources in a Circular Economy' concept is the only sustainable solution. The objective of this review is to critically examine the availability, elemental composition, and the market potential of the selected secondary resources such as lignocellulosic/algal biomass, desalination water, sewage sludge, phosphogypsum, and e-waste for minerals sequestration. This review showed that, secondary resources have potential to partially replace the minerals required in different sectors such as macro and microelements in agriculture, rare earth elements (REEs) in electrical and electronics industry, metals in manufacturing sector and precious elements such as gold and platinum in ornamental industry. Further, inputs from the selected life cycle analysis (LCA) & techno economic analysis (TEA) were discussed which showed that although, urban mining has a potential to reduce the greenhouse gaseous (GHG) emissions in a sustainable manner however, process improvements through innovative, novel and cost-effective pathways are essentially required for its large-scale deployment at industrial scale in future.

Next generation applications of lignin derived commodity products, their life cycle, techno-economics and societal analysis.

The pulp and biorefining industries produce their waste as lignin, which is one of the most abundant renewable resources. So far, lignin has been remained severely underutilized and generally burnt in a boiler as a low-value fuel. To demonstrate lignin's potential as a value-added product, we will review market opportunities for lignin related applications by utilizing the thermo-chemical/biological depolymerization strategies (with or without catalysts) and their comparative evaluation. The application of lignin and its derived aromatics in various sectors such as cement industry, bitumen modifier, energy materials, agriculture, nanocomposite, biomedical, H2 source, biosensor and bioimaging have been summarized. This comprehensive review article also highlights the technical, economic, environmental, and socio-economic variable that affect the market value of lignin-derived by-products. The review shows the importance of lignin, and its derived products are a platform for future bioeconomy and sustainability.

2G waste lignin to fuel and high value-added chemicals: Approaches, challenges and future outlook for sustainable development.

Lignin is produced as a byproduct in cellulosic biorefinery as well in pulp and paper industries and has the potential for the synthesis of a variety of phenolics chemicals, biodegradable polymers, and high value-added chemicals surrogate to conventional petro-based fuels. Therefore, in this critical review, we emphasize the possible scenario for lignin isolation, transformation into value addition chemicals/materials for the economic viability of current biorefineries. Additionally, this review covers the chemical structure of lignocellulosic biomass/lignin, worldwide availability of lignin and describe various thermochemical (homogeneous/heterogeneous base/acid-catalyzed depolymerization, oxidative, hydrogenolysis etc.) and biotechnological developments for the production of bio-based low molecular weight phenolics, i.e. polyhydroxyalkanoates, vanillin, adipic acid, lipids etc. Besides, some functional chemicals applications, lignin-formaldehyde ion exchange resin, electrochemical and production of few targeted chemicals are also elaborated. Finally, we examine the challenges, opportunities and prospects way forward related to lignin valorization.

Natural deep eutectic solvents for lignocellulosic biomass pretreatment: Recent developments, challenges and novel opportunities.

Conversion of lignocellulosic biomass to fuels and chemicals has attracted immense research and development around the world. Lowering recalcitrance of biomass in a cost-effective manner is a challenge to commercialize biomass-based technologies. Deep eutectic solvents (DESs) are new 'green' solvents that have a high potential for biomass processing because of their low cost, low toxicity, biodegradability, easy recycling and reuse. This article discusses the properties of DESs and recent advances in their application for lignocellulosic biomass processing. The effectiveness of DESs in hydrolyzing lignin-carbohydrate complexes, removing lignin/hemicellulose from biomass as well as their effect on biomass deconstruction, crystallinity and enzymatic digestibility have been discussed. Moreover, this review presents recent findings on the compatibility of natural DESs with enzymes and microorganisms.

Investigating the enzyme-lignin binding with surfactants for improved saccharification of pilot scale pretreated wheat straw.

In this study, commercial surfactants have been investigated at economically viable dosage to enhance the enzymatic saccharification of pretreated wheat straw at high solid loadings. Twenty one surfactants were evaluated with pilot scale pretreated wheat straw and mechanism of surfactant action has been elucidated. One surfactant has improved the saccharification of dilute acid wheat straw (DAWS) by 26.4% after 24h and 23.1% after 48h while, steam exploded wheat straw (SEWS) saccharification was increased by 51.2% after 24h and 36.4% after 48h at 10% solid loading. At 20% solid loading, about 31% increase in yield was obtained on DAWS and about 55% on SEWS after 48h. Further, lignin was isolated from pretreated wheat straws and characterized which revealed that SEWS derived lignin was more hydrophobic than DAWS lignin. This investigation suggests that surfactant supplementation during saccharification is an effective strategy to achieve higher saccharification yield.

Untreated wheat straw: potential source for diverse cellulolytic enzyme secretion by Penicillium janthinellum EMS-UV-8 mutant.

Study describes the production of cellulases by Penicillium janthinellum EMS-UV-8 using untreated wheat straw (WS), treated WS (acid, alkali, steam exploded, organo-solv) and pure cellulosic substrates (avicel, cellulose-II and carboxymethyl cellulose). Severely pretreated WS and cellulose-II produced more cellulolytic enzymes than untreated samples. XRD and FTIR analysis revels that the increase in the amorphous structure of pretreated WS/cellulose increases enzyme production. Enzyme samples prepared using different substrates were used for the hydrolysis of dilute acid treated wheat straw (DATWS), steam exploded wheat straw (SEWS) and avicel. The enzyme prepared using untreated WS gave more hydrolysis of DATWS and SEWS than the enzyme prepared using pretreated WS or pure cellulosic substrates. This revels that more diverse/potential enzymes were secreted by P. janthinellum EMS-UV-8 mutant using untreated WS. This study may contribute in production of efficient enzyme mixture/cocktail by single fungal strain for economic conversion of biomass to sugars.

Development of a ß-glucosidase hyperproducing mutant by combined chemical and UV mutagenesis.

The extracellular ß-glucosidase from microorganisms is generally produced in low levels. Therefore, in this study, a ß-glucosidase hyperproducing mutant was developed by multiple exposures of ethyl methyl sulfonate (EMS) and ultraviolet (UV) radiation (both individually and jointly) to Bacillus subtilis strain (PS). The developed mutants were screened, selected and characterized. The mutant, PS-UM1 developed after UV exposure alone, indicated a small increase in ß-glucosidase production (718 U/l) in comparison to the wild-type strain, PS (675 U/l). The mutant, PS-CM5 developed after EMS exposure alone, displayed a slightly better production (762 U/l) than both the above strains. However, after exposure of the wild-type strain to both UV and EMS mutagens jointly, a better mutant (PS-CM5-UM3) was developed with 1.2-fold increase in production (806 U/l). Further, optimization of culture conditions by classical "one-variable-at-a-time" approach was done to determine the optimum, pH, temperature and nitrogen sources. The selected mutant (PS-CM5-UM3) produced up to 1,797 U/l enzyme and was found to be stable for ten generations. The ß-glucosidase from the selected mutant (PS-CM5-UM3) was concentrated and purified using ammonium sulfate, dialysis and size-exclusion chromatography. The enzyme displayed maximal activity at 60 °C and it was found to be fairly stable at temperatures up to 70 °C for 30 min. Its molecular weight was determined to be around 60 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE).

Rapid detection of cadmium-resistant plant growth promotory rhizobacteria: a perspective of ELISA and QCM-based immunosensor.

Plant growth-promoting rhizobacteria (PGPR) pseudomonads have a large number of lipopolysaccharides on the cell surface, which induces immune responses. Cd-resistant PGPR prevalent at the Cd-affected sites under biophytostabilization was monitored. Transmissiom electron microscopy was used to the study the behavior of tolerance of PGPR to cadmium level and its effect on pseudomonad strains (Z9, S2, KNP2, CRPF, and NBRI). An immunosensor was developed by immobilizing antibody (anti-Z9 or anti-S2) against selected PGPR on a piezoelectric quartz crystal microbalance (QCM). Immunosensors were found to supplement the inherent specificity of antigen-antibody reactions with the high sensitivity of a physical transducer. On comparison of the efficiency of detection with ELISA, the spectrophotometric technique, the developed immunosensor was found to be more sensitive, fast, and reliable even after regeneration for several times. Thus, the immunosensor may be used for future detection of PGPR strains after automation of the screening process.

Comparative biodegradation of HDPE and LDPE using an indigenously developed microbial consortium.

A variety of bacterial strains were isolated from waste disposal sites of Uttaranchal, India, and some from artificially developed soil beds containing maleic anhydride, glucose, and small pieces of polyethylene. Primary screening of isolates was done based on their ability to utilize high- and low-density polyethylenes (HDPE/LDPE) as a primary carbon source. Thereafter, a consortium was developed using potential strains. Furthermore, a biodegradation assay was carried out in 500-ml flasks containing minimal broth (250 ml) and HDPE/ LDPE at 5 mg/ml concentration. After incubation for two weeks, degraded samples were recovered through filtration and subsequent evaporation. Fourier transform infrared spectroscopy (FTIR) and simultaneous thermogravimetric-differential thermogravimetry-differential thermal analysis TG-DTG-DTA) were used to analyze these samples. Results showed that consortium-treated HDPE (considered to be more inert relative to LDPE) was degraded to a greater extent 22.41% weight loss) in comparison with LDPE (21.70% weight loss), whereas, in the case of untreated samples, weight loss was more for LDPE than HDPE (4.5% and 2.5%, respectively) at 400 degrees . Therefore, this study suggests that polyethylene could be degraded by utilizing microbial consortia in an eco-friendly manner.