Development of the BioBattery: A novel enzyme fuel cell using a multicopper oxidase as an anodic enzyme.

This work presents the development of an enzyme fuel cell, termed "BioBattery", that utilizes multicopper oxidases as the anodic enzyme in a non-diffusion limited system. We evaluated various enzyme variants as the anode, including multicopper oxidase from Pyrobaculum aerophilum, laccase from Trametes versicolor, and bilirubin oxidase from Myrothecium verrucaria. Several combinations of cathodes were also examined, focusing on the reduction of oxygen as the primary electron acceptor. The optimal pairing used multicopper oxidase from Pyrobaculum aerophilum as the anode and amine reactive phenazine ethosulfate modified bovine serum albumin as the cathode. BioBattery was integrated with our previously developed BioCapacitor, proving capable of consistently powering a 470 µF capacitor, positioning it as a modular power source for wearable and implantable systems. This research work addresses and overcomes some of the fundamental limitations seen in enzyme fuel cells, where power and current are often limited by substrate accessibility to the active electrode surface. (152 words).

Two different alanine dehydrogenases from Geobacillus kaustophilus: Their biochemical characteristics and differential expression in vegetative cells and spores.

Two putative alanine dehydrogenase (AlaDH) genes (GK2752 and GK3448) were found in the genome of a thermophilic spore-forming bacterium, Geobacillus kaustophilus. The amino acid sequences deduced from the two genes showed mutually high homology (71%), and the phylogenetic tree based on the amino acid sequences of the two putative AlaDHs and the homologous proteins showed that the two putative AlaDH genes (GK2752 and GK3448) belong to different groups. Both of the recombinant gene products exhibited high NAD+-dependent AlaDH activity and were purified to homogeneity and characterized in detail. Both enzymes showed high stability against low and high pHs and high temperatures (70 °C). Kinetic analyses showed that the activities of both enzymes proceeded according to the same sequentially ordered Bi-Ter mechanism. X-ray crystallographic analysis showed the two AlaDHs to have similar homohexameric structures. Notably, GK3448-AlaDH was detected in vegetative cells of G. kaustophilus but not spores, while GK2752-AlaDH was present only in the spores. This is the first report showing the presence of two AlaDHs separately expressed in vegetative cells and spores.

Self-assembly of Aeropyrum pernix bacilliform virus 1 (APBV1) major capsid protein and its application as building blocks for nanomaterials.

Virus capsid proteins have various applications in diverse fields such as biotechnology, electronics, and medicine. In this study, the major capsid protein of bacilliform clavavitus APBV1, which infects the hyperthermophilic archaeon Aeropyrum pernix, was successfully expressed in Escherichia coli. The gene product was expressed as a histidine-tagged protein in E. coli and purified to homogeneity using single-step nickel affinity chromatography. The purified recombinant protein self-assembled to form bacilliform virus-like particles at room temperature. The particles exhibited tolerance against high concentrations of organic solvents and protein denaturants. In addition, we succeeded in fabricating functional nanoparticles with amine functional groups on the surface of ORF6-81 nanoparticles. These robust protein nanoparticles can potentially be used as a scaffold in nanotechnological applications.

Characterization of a Novel Thermostable Dye-Linked l-Lactate Dehydrogenase Complex and Its Application in Electrochemical Detection.

Flavoenzyme dye-linked l-lactate dehydrogenase (Dye-LDH) is primarily involved in energy generation through electron transfer and exhibits potential utility in electrochemical devices. In this study, a gene encoding a Dye-LDH homolog was identified in a hyperthermophilic archaeon, Sulfurisphaera tokodaii. This gene was part of an operon that consisted of four genes that were tandemly arranged in the Sf. tokodaii genome in the following order: stk_16540, stk_16550 (dye-ldh homolog), stk_16560, and stk_16570. This gene cluster was expressed in an archaeal host, Sulfolobus acidocaldarius, and the produced enzyme was purified to homogeneity and characterized. The purified recombinant enzyme exhibited Dye-LDH activity and consisted of two different subunits (products of stk_16540 (α) and stk_16550 (ß)), forming a heterohexameric structure (α3ß3) with a molecular mass of approximately 253 kDa. Dye-LDH also exhibited excellent stability, retaining full activity upon incubation at 70 °C for 10 min and up to 80% activity after 30 min at 50 °C and pH 6.5-8.0. A quasi-direct electron transfer (DET)-type Dye-LDH was successfully developed by modification of the recombinant enzyme with an artificial redox mediator, phenazine ethosulfate, through amine groups on the enzyme's surface. This study is the first report describing the development of a quasi-DET-type enzyme by using thermostable Dye-LDH.

Highly Efficient Multi-Step Oxidation Bioanode Using Microfluidic Channels.

With the rapid decline of fossil fuels, various types of biofuel cells (BFCs) are being developed as an alternative energy source. BFCs based on multi-enzyme cascade reactions are utilized to extract more electrons from substrates. Thus, more power density is obtained from a single molucule of substrate. In the present study, a bioanode that could extract six electrons from a single molecule of L-proline via a three-enzyme cascade reaction was developed and investigated for its possible use in BFCs. These enzymes were immobilized on the electrode to ensure highly efficient electron transfer. Then, oriented immobilization of enzymes was achieved using two types of self-assembled monolayers (SAMs). In addition, a microfluidic system was incorporated to achieve efficient electron transfer. The microfluidic system, in which the electrodes were arranged in a tooth-shaped comb, allowed for substrates to be supplied continuously to the cascade, which resulted in smooth electron transfer. Finally, we developed a high-performance bioanode which resulted in the accumulation of higher current density compared to that of a gold disc electrode (205.8 µA cm-2: approximately 187 times higher). This presents an opportunity for using the bioanode to develop high-performance BFCs in the future.

Activity enhancement of multicopper oxidase from a hyperthermophile via directed evolution, and its application as the element of a high performance biocathode.

Although multicopper oxidase from the hyperthermophilic archaeon Pyrobaculum aerophilum (McoP) can be particularly useful in biotechnological applications, e.g., as a specific catalyst at the biocathode of biofuel cells (BFCs), owing to its high stability against extremely high temperatures and across a wide range of pH values, this application potential remains limited due to the enzyme's low catalytic activity. A directed evolution strategy was conducted to improve McoP catalytic activity, and the No. 571 mutant containing four amino acid substitutions was identified, with specific activity approximately 9-fold higher than that of the wild type enzyme. Among the substitutions, the single amino acid mutant F290I was essential in enhancing catalytic activity, with a specific activity approximately 12-fold higher than that of the wild type enzyme. F290I thermostability and pH stability were notably comparable with values obtained for the wild type. Crystal structure analysis suggested that the F290I mutant increased loop flexibility near the T1 Cu center, and affected electron transfer between the enzyme and substrate. Additionally, electric current density of the F290I mutant-immobilized electrode was 7-fold higher than that of the wild type-immobilized one. These results indicated that F290I mutant was a superior catalyst with potential in practical biotechnological applications.

Biocathode design with highly-oriented immobilization of multi-copper oxidase from Pyrobaculum aerophilum onto a single-walled carbon nanotube surface via a carbon nanotube-binding peptide.

Biofuel cells generate electric energy using an enzyme as a catalyst for an electrode but their stability and low battery output pose problems for practical use. To solve these problems, this study aimed to build a long-lasting and high-output biocathode as a catalyst using a highly stable hyperthermophilic archaeal enzyme, multi-copper oxidase, from Pyrobaculum aerophilum (McoP). To increase output, McoP was oriented and immobilized on single-walled carbon nanotubes (SWCNT) with a high specific surface area, and the electrode interface was designed to achieve highly efficient electron transfer between the enzyme and electrode. Type 1 copper (T1Cu), an electron-accepting site in the McoP molecule, is located near the C-terminus. Therefore, McoP was prepared by genetically engineering a CNT-binding peptide with the sequence LLADTTHHRPWT, at the C-terminus of McoP (McoP-CBP). We then constructed an electrode using a complex in which McoP-CBP was aligned and immobilized on SWCNT, and then clarified the effect of CBP. The amounts of immobilized enzymes on McoP-SWCNT and (McoP-CBP)-SWCNT complexes were almost equal. CV measurement of the electrode modified with both complexes showed 5.4 times greater current density in the catalytic reaction of the (McoP-CBP)-SWCNT/GC electrode than in the McoP-SWCNT/GC electrode. This is probably because CBP fusion immobilize the enzyme on SWCNTs in an orientational manner, and T1Cu, the oxidation-reduction site in McoP, is close to the electrode, which improves electron transfer efficiency.

Site-Directed Mutagenesis of Multicopper Oxidase from Hyperthermophilic Archaea for High-Voltage Biofuel Cells.

Enzymes from hyperthermophilic archaea are potential candidates for industrial use because of their superior pH, thermal, and long-term stability, and are expected to improve the long-term stability of biofuel cells (BFCs). However, the reported multicopper oxidase (MCO) from hyperthermophilic archaea has lower redox potential than MCOs from other organisms, which leads to a decrease in the cell voltage of BFCs. In this study, we attempted to positively shift the redox potential of the MCO from hyperthermophilic archaeon Pyrobaculum aerophilum (McoP). Mutations (M470L and M470F) were introduced into the axial ligand of the T1 copper atom of McoP, and the enzymatic chemistry and redox potentials were compared with that of the parent (M470). The redox potentials of M470L and M470F shifted positively by about 0.07 V compared with that of M470. In addition, the catalytic activity of the mutants towards 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) increased 1.2-1.3-fold. The thermal stability of the mutants and the electrocatalytic performance for O2 reduction of M470F was slightly reduced compared with that of M470. This research provides useful enzymes for application as biocathode catalysts for high-voltage BFCs.

Characterization of dye-linked d-amino acid dehydrogenase from Sulfurisphaera tokodaii expressed using an archaeal recombinant protein expression system.

A gene encoding a dye-linked d-amino acid dehydrogenase (Dye-DADH) homologue was found in a hyperthermophilic archaeon, Sulfurisphaera tokodaii. The predicted amino acid sequence suggested that the gene product is a membrane-bound type enzyme. The gene was overexpressed in Escherichia coli, but the recombinant protein was exclusively produced as an inclusion body. In order to avoid production of the inclusion body, an expression system using the thermoacidophilic archaeon Sulfolobus acidocaldarius instead of E. coli as the host cell was constructed. The gene was successfully expressed in Sulfolobus acidocaldarius, and its product was purified to homogeneity and characterized. The purified enzyme catalyzed the dehydrogenation of various d-amino acids, with d-phenylalanine being the most preferred substrate. The enzyme retained its full activity after incubation at 90 °C for 30 min and after incubation at pH 4.0-11.0 for 30 min at 50 °C. This is the first report on membrane-bound Dye-DADH from thermophilic archaea that was successfully expressed in an archaeal host.

Electrochemical characteristics of a hyperthermophilic enzyme in microdroplets stirred and heated by surface acoustic waves.

Micro total analysis system (µTAS) is expected to be applied in various fields. In particular, since electrochemical measurement is inexpensive and easy, electrochemical measurement can be integrated with a microchannel. However, electrochemical detection sensitivity in a microchannel is lowered because the diffusion of the detection target is limited. In an ordinary electrochemical detection system, using a stirrer in a beaker can overcome limited diffusion. We previously proposed a new detection system that combines a microliquid solution agitation technology using surface acoustic waves (SAWs) with the µTAS. The SAWs function as microstirrers, thus making electrochemical detection possible by overcoming limited diffusion of the sample. However, when the solution is stirred by the SAWs, the temperature of the solution increases to 70°C due to vibrational energy. This leads to enzyme inactivation and impaired electrochemical response. Therefore, in this study, we used a hyperthermophile-derived enzyme. Temperature and electrochemical characteristics of the detection system using SAWs and a multi-copper oxidase (MCO) derived from the hyperthermophilic archaea Pyrobaculum aerophilum were studied. Laccase, which is an MCO derived from the thermophilic fungus Trametes versicolor, was also studied. We also characterized the enzyme-electrochemical reaction using SAWs by comparing the magnitude of the reduction current obtained using the two enzymes with different heat resistances. We observed an increase in the electrochemical response with the SAWs, without impaired enzyme activity. Thus, the use of a thermostable enzyme is suitable for the development of a biosensor that uses SAWs for agitation.

Construction of a novel bioanode for amino acid powered fuel cells through an artificial enzyme cascade pathway.

OBJECTIVE: The construction of a novel bioanode based on L-proline oxidation using a cascade reaction pathway comprised of thermostable dehydrogenases. RESULTS: A novel multi-enzymatic cascade pathway, containing four kinds of dehydrogenases from thermophiles (dye-linked L-proline dehydrogenase, nicotinamide adenine dinucleotide (NAD)-dependent Δ1-pyrroline-5-carboxylate dehydrogenase, NAD-dependent L-glutamate dehydrogenase and dye-linked NADH dehydrogenase), was designed for the generation of six-electrons from one molecule of L-proline. The current density of the four-dehydrogenase-immobilized electrode, with a voltage of + 450 mV (relative to that of Ag/AgCl), was 226.8 µA/cm2 in the presence of 10 mM L-proline and 0.5 mM ferrocene carboxylate at 50 °C. This value was 4.2-fold higher than that of a similar electrode containing a single dehydrogenase. In addition, about 54% of the initial current in the multi-enzyme cascade bioanode was maintained even after 15 days. CONCLUSIONS: Efficient deep oxidation of L-proline by multiple-enzyme cascade reactions was achieved in our designed electrode. The multi-enzyme cascade bioanode, which was built using thermophilic dehydrogenases, showed high durability at room temperature. The long-term stability of the bioanode indicates that it shows great potential for applications as a long-lived enzymatic fuel cell.

Development of Biofuel Cell Using a Complex of Highly Oriented Immobilized His-Tagged Enzyme and Carbon Nanotube Surface Through a Pyrene Derivative.

For increasing the output of biofuel cells, increasing the cooperation between enzyme reaction and electron transfer on the electrode surface is essential. Highly oriented immobilization of enzymes onto a carbon nanotube (CNT) with a large specific surface area and excellent conductivity would increase the potential for their application as biosensors and biofuel cells, by utilizing the electron transfer between the electrode-molecular layer. In this study, we prepared a CNT-enzyme complex with highly oriented immobilization of enzyme onto the CNT surface. The complex showed excellent electrical characteristics, and could be used to develop biodevices that enable efficient electron transfer. Multi-walled carbon nanotubes (MWCNT) were dispersed by pyrene butyric acid N-hydroxysuccinimide ester, and then N-(5-amino-1-carboxypentyl) iminodiacetic acid (AB-NTA) and NiCl2 were added to modify the NTA-Ni2+ complex on the CNT surface. Pyrroloquinoline quinone (PQQ)-dependent glucose dehydrogenase (GDH) was immobilized on the CNT surface through a genetically introduced His-tag. Formation of the MWCNT-enzyme complex was confirmed by monitoring the catalytic current electrochemically to indicate the enzymatic activity. PQQ-GDH was also immobilized onto a highly ordered pyrolytic graphite surface using a similar process, and the enzyme monolayer was visualized by atomic force microscopy to confirm its structural properties. A biofuel cell was constructed using the prepared CNT-enzyme complex and output evaluation was carried out. As a result, an output of 32 µW/cm² could be obtained without mediators.

Effects of multicopper oxidase orientation in multiwalled carbon nanotube biocathodes on direct electron transfer.

In this study, multicopper oxidase (MCO) was immobilized on multiwalled carbon nanotubes (MWCNTs) at two different orientations, and the electrochemical properties of the resulting cathodes were investigated. Using N- or C-terminal His-tagged MCO and MWCNTs, we constructed two types of cathodes. We assumed that the distance between the type 1 (T1)Cu of the C-terminal His-tagged MCO and the MWCNT surface was lesser than that between the T1Cu of the N-terminal His-tagged MCO and the MWCNT surface. In addition, in the C-terminal His-tagged MCO, T1Cu was expected to be closer to the MWCNT surface than the type 2/type 3 Cu site. The current density of the modified electrode with a C-terminal His-tagged MCO immobilized on an MWCNT surface was 1.3-fold higher than that of the electrode with an N-terminal His-tagged MCO immobilized on an MWCNT surface. In addition, the amount of H2 O2 produced by the N-terminal His-tagged MCO immobilized MWCNT modified electrodes was 2.3-fold higher than that produced by the C-terminal His-tagged MCO immobilized MWCNT electrodes. In direct electron transfer (DET)-type biocathodes, both the MCO orientation and the distance between the T1Cu of MCO and the electrode surface are important. The authors succeeded in constructing highly efficient DET-type electrodes.

Enzymological characteristics of a novel archaeal dye-linked D-lactate dehydrogenase showing loose binding of FAD.

A gene-encoding a dye-linked D-lactate dehydrogenase (Dye-DLDH) homolog was identified in the genome of the hyperthermophilic archaeon Thermoproteus tenax. The gene was expressed in Escherichia coli and the product was purified to homogeneity. The recombinant protein exhibited highly thermostable Dye-DLDH activity. To date, four types of Dye-DLDH have been identified in hyperthermophilic archaea (in Aeropyrum pernix, Sulfolobus tokodaii, Archaeoglobus fulgidus, and Candidatus Caldiarchaeum subterraneum). The amino acid sequence of T. tenax Dye-DLDH showed the highest similarity (45%) to A. pernix Dye-DLDH, but neither contained a known FAD-binding motif. Nonetheless, both homologs required FAD for enzymatic activity, suggesting that FAD binds loosely to the enzyme and is easily released unlike in other Dye-DLDHs. Our findings indicate that Dye-DLDHs from T. tenax and A. pernix are a novel type of Dye-DLDH characterized by loose binding of FAD.

A L-proline/O2 biofuel cell using L-proline dehydrogenase (LPDH) from Aeropyrum pernix.

To utilize amino acids from food waste as an energy source, L-proline/O2 biofuel cell was constructed using a stable enzyme from hyperthermophilic archaeon for long-term operation. On the anode, the electrocatalytic oxidation of L-proline by L-proline dehydrogenase from Aeropyrum pernix was observed in the presence of ferrocenecarboxylic acid as mediator. On the cathode, electrocatalytic oxygen reduction was detected. Ketjenblack modification of carbon cloth substrate increased the current density due to increased laccase loading and enhanced electron transfer reaction. The biofuel cell using these electrodes achieved a current density of 6.00 µA/cm2. We successfully constructed the first biofuel cell that generates power from L-proline.

d-Lactate electrochemical biosensor prepared by immobilization of thermostable dye-linked d-lactate dehydrogenase from Candidatus Caldiarchaeum subterraneum.

A stable d-lactate electrochemical sensing system was developed using a dye-linked d-lactate dehydrogenase (Dye-DLDH) from an uncultivated thermophilic archaeon, Candidatus Caldiarchaeum subterraneum. To develop the system, the putative gene encoding the Dye-DLDH from Ca. Caldiarchaeum subterraneum was overexpressed in Escherichia coli, and the expressed product was purified. The recombinant enzyme was a highly thermostable Dye-DLDH that retained full activity after incubation for 10 min at 70°C. The electrode for detection of d-lactate was prepared by immobilizing the thermostable Dye-DLDH and multi-walled carbon nanotube (MWCNT) within Nafion membrane. The electrocatalytic response of the electrode was clearly observed upon exposure to d-lactate. The electrode response to d-lactate was linear within the concentration range of 0.03-2.5 mM, and it showed little reduction in responsiveness after 50 days. This is the first report describing a d-lactate sensing system using a thermostable Dye-DLDH.

An Electrochemical DNA Sensing System Using Modified Nanoparticle Probes for Detecting Methicillin-Resistant Staphylococcus aureus.

We have developed a novel, highly sensitive, biosensing system for detecting methicillin-resistant Staphylococcus aureus (MRSA). The system employs gold nanoparticles (AuNPs), magnetic nanoparticles (mNPs), and an electrochemical detection method. We have designed and synthesized ferrocene- and single-stranded DNA-conjugated nanoparticles that hybridize to MRSA DNA. Hybridized complexes are easily separated by taking advantage of mNPs. A current response could be obtained through the oxidation of ferrocene on the AuNP surface when a constant potential of +250 mV vs. Ag/AgCl is applied. The enzymatic reaction of L-proline dehydrogenase provides high signal amplification. This sensing system, using a nanoparticle-modified probe, has the ability to detect 10 pM of genomic DNA from MRSA without amplification by the polymerase chain reaction. Current responses are linearly related to the amount of genomic DNA in the range of 10-166 pM. Selectivity is confirmed by demonstrating that this sensing system could distinguish MRSA from Staphylococcus aureus (SA) DNA.

Design of a multi-enzyme reaction on an electrode surface for an L-glutamate biofuel anode.

OBJECTIVES: To design and construct a novel bio-anode electrode based on the oxidation of glutamic acid to produce 2-oxoglutarate, generating two electrons from NADH. RESULTS: Efficient enzyme reaction and electron transfer were observed owing to immobilization of the two enzymes using a mixed self-assembled monolayer. The ratio of the immobilized enzymes was an important factor affecting the efficiency of the system; thus, we quantified the amounts of immobilized enzyme using a quartz crystal microbalance to further evaluate the electrochemical reaction. The electrochemical reaction proceeded efficiently when approximately equimolar amounts of the enzyme were on the electrode. The largest oxidation peak current increase (171 nA) was observed under these conditions. CONCLUSION: Efficient multi-enzyme reaction on the electrode surface has been achieved which is applicable for biofuel cell application.

First characterization of extremely halophilic 2-deoxy-D-ribose-5-phosphate aldolase.

2-Deoxy-d-ribose-5-phosphate aldolase (DERA) catalyzes the aldol reaction between two aldehydes and is thought to be a potential biocatalyst for the production of a variety of stereo-specific materials. A gene encoding DERA from the extreme halophilic archaeon, Haloarcula japonica, was overexpressed in Escherichia coli. The gene product was successfully purified, using procedures based on the protein's halophilicity, and characterized. The expressed enzyme was stable in a buffer containing 2 M NaCl and exhibited high thermostability, retaining more than 90% of its activity after heating at 70 °C for 10 min. The enzyme was also tolerant to high concentrations of organic solvents, such as acetonitrile and dimethylsulfoxide. Moreover, H. japonica DERA was highly resistant to a high concentration of acetaldehyde and retained about 35% of its initial activity after 5-h' exposure to 300 mM acetaldehyde at 25 °C, the conditions under which E. coli DERA is completely inactivated. The enzyme exhibited much higher activity at 25 °C than the previously characterized hyperthermophilic DERAs (Sakuraba et al., 2007). Our results suggest that the extremely halophilic DERA has high potential to serve as a biocatalyst in organic syntheses. This is the first description of the biochemical characterization of a halophilic DERA.

Regulation of the rhaEWRBMA Operon Involved in l-Rhamnose Catabolism through Two Transcriptional Factors, RhaR and CcpA, in Bacillus subtilis.

UNLABELLED: The Bacillus subtilis rhaEWRBMA (formerly yuxG-yulBCDE) operon consists of four genes encoding enzymes for l-rhamnose catabolism and the rhaR gene encoding a DeoR-type transcriptional regulator. DNase I footprinting analysis showed that the RhaR protein specifically binds to the regulatory region upstream of the rhaEW gene, in which two imperfect direct repeats are included. Gel retardation analysis revealed that the direct repeat farther upstream is essential for the high-affinity binding of RhaR and that the DNA binding of RhaR was effectively inhibited by L-rhamnulose-1-phosphate, an intermediate of L-rhamnose catabolism. Moreover, it was demonstrated that the CcpA/P-Ser-HPr complex, primarily governing the carbon catabolite control in B. subtilis, binds to the catabolite-responsive element, which overlaps the RhaR binding site. In vivo analysis of the rhaEW promoter-lacZ fusion in the background of ccpA deletion showed that the L-rhamnose-responsive induction of the rhaEW promoter was negated by the disruption of rhaA or rhaB but not rhaEW or rhaM, whereas rhaR disruption resulted in constitutive rhaEW promoter activity. These in vitro and in vivo results clearly indicate that RhaR represses the operon by binding to the operator site, which is detached by L-rhamnulose-1-phosphate formed from L-rhamnose through a sequence of isomerization by RhaA and phosphorylation by RhaB, leading to the derepression of the operon. In addition, the lacZ reporter analysis using the strains with or without the ccpA deletion under the background of rhaR disruption supported the involvement of CcpA in the carbon catabolite repression of the operon. IMPORTANCE: Since L-rhamnose is a component of various plant-derived compounds, it is a potential carbon source for plant-associating bacteria. Moreover, it is suggested that L-rhamnose catabolism plays a significant role in some bacteria-plant interactions, e.g., invasion of plant pathogens and nodulation of rhizobia. Despite the physiological importance of L-rhamnose catabolism for various bacterial species, the transcriptional regulation of the relevant genes has been poorly understood, except for the regulatory system of Escherichia coli. In this study, we show that, in Bacillus subtilis, one of the plant growth-promoting rhizobacteria, the rhaEWRBMA operon for L-rhamnose catabolism is controlled by RhaR and CcpA. This regulatory system can be another standard model for better understanding the regulatory mechanisms of L-rhamnose catabolism in other bacterial species.