Does Addition of a Longer Acting Local Anesthetic Improve Postoperative Pain After Carpal Tunnel Release? A Randomized Controlled Trial.

PURPOSE: Carpal tunnel release (CTR) is a simple and effective treatment for carpal tunnel syndrome in patients who have failed nonsurgical management. This surgery is often performed in the ambulatory clinic under local anesthesia, with lidocaine, a short-acting agent. Few studies have investigated the use of longer acting agents, such as bupivacaine, for outpatient CTR. Therefore, the aim of our study was to compare the postoperative pain experience after CTR with the use of either our standard lidocaine solution (control) or a mixture consisting of lidocaine and bupivacaine in equal amounts (intervention). METHODS: Patients undergoing CTR were randomized into control or intervention groups. Postoperative pain severity and numbness were recorded at several timepoints within the first 72 hours. The timing and quantity of postoperative analgesic use (acetaminophen and/or ibuprofen) was also documented. Both patients and assessor were blinded to allocation. RESULTS: Our study cohort included 139 patients: 67 in the control group and 72 in the intervention group. Postoperative pain scores were significantly lower in the intervention group at 6 hours (2.3 vs 3.2) and 8 hours (2.9 vs 3.9). Additionally, patients in the intervention group reported longer time to first analgesic use than those in the control group (5.2 hours vs 3.7 hours). A greater proportion of patients in the intervention group reported postoperative numbness at nearly all time points, compared to the control group. CONCLUSIONS: Our study shows that a mixture of bupivacaine and lidocaine improves early postoperative pain but causes prolonged finger numbness when compared to lidocaine alone. As both medications are effective and feasible for outpatient CTR, surgeon and patient preference should guide local anesthetic choice. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic Ib.

Four-Corner Arthrodesis with a Dorsal Locking PEEK Plate: A Retrospective Case Series.

Background Four-corner arthrodesis (4CA) can be performed with a variety of methods. To our knowledge, fewer than 125 cases of 4CA with a locking polyether ether ketone (PEEK) plate have been reported, necessitating further study. Purpose The purpose of this study was to evaluate the radiographic union rate and clinical outcomes in a series of patients who received 4CA with a locking PEEK plate. Methods We re-examined 39 wrists in 37 patients at a mean follow-up of 50 months (median: 52 months, range: 6-128). Patients completed the Quick Disabilities of the Arm, Shoulder, and Hand (QuickDASH), Patient-Rated Wrist Evaluation (PRWE), and participated in measurements of grip strength and range of motion. Anteroposterior, lateral, and oblique radiographs of the operative wrist were examined for union, screw breakage and/or loosening, and lunate change. Results The mean QuickDASH score was 24.4 and the mean PRWE score was 26.5. Mean grip strength was 29.2 kg or 84% of the nonoperative hand. Mean flexion, extension, radial deviation, and ulnar deviation were : 37.2, 28.9, 14.1, and 17.4 degrees, respectively. Eighty-seven percent of wrists achieved union; 8% had nonunion; and5% had indeterminate union. There were seven cases of screw breakage and seven cases of screw loosening (as defined by lucency or bony resorption surrounding screws). Twenty-three percent of wrists required reoperation (four total wrist arthrodesis and five reoperations for other reasons). Conclusion 4CA with a locking PEEK plate has clinical and radiographic outcomes similar to other methods. We observed a high rate of hardware complications. It is unclear whether this implant offers a clear advantage over other methods of fixation used in 4CA. Type of Study/Level of Evidence Level IV, therapeutic study.

Four-Corner Arthrodesis With Differing Methods of Osteosynthesis: A Systematic Review.

PURPOSE: The purpose of this study was to compare the union rates and clinical outcomes of 4-corner arthrodesis with different methods of osteosynthesis. METHODS: A systematic review of studies published in Ovid, Medline, Embase, and PubMed was conducted. Primary studies that reported clinical and radiographic results following 4-corner arthrodesis for scapholunate advanced collapse (SLAC), scaphoid nonunion advanced collapse (SNAC), or other types of wrist arthritis in human subjects were eligible. Biomechanical or cadaveric studies, case reports, studies that did not define and report a radiographic union rate, reviews and technical articles, studies that did not report the method of osteosynthesis, and studies that used multiple methods of osteosynthesis, but did not separate results for individual methods of osteosynthesis were excluded. Radiographic union rate, range of motion, and grip strength were analyzed. RESULTS: We identified and reviewed 291 full texts, selecting 57 studies for coding. The radiographic union rate did not significantly differ between studies using K-wire, screw, staple, nonlocking plate, metal locking plate, and radiolucent locking plate osteosynthesis. Fixation method significantly affected flexion, but pairwise comparison did not reveal any significant differences between individual groups. Grip strength as a percentage of the contralateral limb was significantly lower in studies with metal locking plate fixation compared to K-wire fixation (63.2% vs 82.6%). There were no other statistically significant differences between groups with respect to flexion, extension, radial deviation, ulnar deviation, and grip strength. CONCLUSIONS: All methods of osteosynthesis result in similar union rates, with no significant differences between methods. While there are some significant differences in range of motion and grip strength, these differences are unlikely to be clinically relevant. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

The Effect of Personalized Patient Videos on Patient Satisfaction After Arthroscopic Shoulder Surgery.

Dissatisfaction after shoulder arthroscopy may be influenced by the information that patients receive. Multimedia is an emerging modality of information delivery. The goal of this study was to evaluate whether providing patients with a personalized video of their arthroscopic shoulder surgery improved satisfaction through a multisurgeon randomized controlled study. Patients undergoing arthroscopic shoulder decompression, rotator cuff repair, or labral repair were randomized to either the intervention group, receiving a video recording of their surgery, or the control group, not receiving a video. Patients who had previous ipsilateral shoulder arthroscopy or who could not participate in follow-up were excluded. Patient satisfaction was assessed at 3 months with a visual analog scale (VAS), Likert scale, and Quick Disabilities of the Arm, Hand and Shoulder (QuickDASH) score. The intervention group included 50 participants, and the control group included 47 participants, with 18% loss to follow-up. Mean control group VAS score was 8.5±2.2 and intervention group VAS score was 9.0±1.5, a difference that was not significantly different (P=.27). No statistically significant differences were noted for Likert scale scores and QuickDASH scores. A subgroup analysis of age group, sex, surgeon, and surgical procedure showed no significant differences. Based on these findings, personalized patient videos do not appear to improve satisfaction with surgery. Surgeons should investigate other means to improve patient satisfaction in the small group of dissatisfied patients. [Orthopedics. 2021;44(3):e331-e336.].

Recovery of borderline oxacillin-resistant Staphylococcus pseudintermedius (BORSP) from bone and soft tissue of a rheumatoid arthritis patient with severe osteoporosis: transmission from the family dog.

We report a case of borderline oxacillin-resistant S. pseudintermedius (BORSP) in a rheumatoid arthritis patient with severe osteoporosis. The organism is also resistant to erythromycin and clindamycin. We also present clear evidence on transmission from the family dog.

The Effects of Patient Resilience and Catastrophizing on Carpal Tunnel Surgical Outcomes.

Purpose: Outcomes following carpal tunnel release (CTR) are generally favorable. When patient satisfaction or symptom resolution is not as expected, understanding what factors contribute to that outcome could allow for strategies targeted at improving results. Our purpose was to determine if measurable mental health factors, specifically resilience and pain catastrophization, correlate with patients' postoperative outcomes following CTR. Methods: A prospective cohort study was performed. Ninety-four patients were recruited to take part in the study. Patients completed written consent, the Boston Carpal Tunnel Questionnaire (BCTQ), the Pain Catastrophizing Scale, and the Brief Resilience Scale. A single surgeon, or his resident under supervision, performed an open CTR under local anesthetic. Our primary outcome measure was a repeat BCTQ at 6 months. Pearson correlation coefficients and univariate analyses were performed to assess the correlation between Pain Catastrophizing Scale and Brief Resilience Scale scores and final BCTQ scores. Results: Forty-three and 63 participants completed the BCTQ at 3 and 6 months, respectively. This was 10% below the number needed to achieve appropriate power. Among those that responded, all participants showed improvement in their symptoms (P = .001). There was no correlation between patients' Pain Catastrophizing Scale or Brief Resilience Scale scores and 6-month BCTQ scores or the amount of improvement in the BCTQ at final follow-up. Conclusions: Most participants improved following CTR. Patients' self-assessed resilience, and the degree of pain catastrophization did no correlate with the amount of improvement patients had after surgery. Type of study/level of evidence: Prognostic II.

A comparison of two headless compression screws for operative treatment of scaphoid fractures.

PURPOSE: The purpose of this study was to compare the interfragmentary compression force across a simulated scaphoid fracture by two commonly used compression screw systems; the Acutrak 2 Standard and the 3.0 mm Synthes headless compression screw. METHODS: Sixteen (8 pairs; 6 female, 2 male) cadaver scaphoids were randomly assigned to receive either the Acutrak 2 or Synthes screw with the contralateral scaphoid designated to receive the opposite. Guide wires were inserted under fluoroscopic control. Following transverse osteotomy, the distal and proximal fragments were placed on either side of a custom load cell, to measure interfragmentary compression. Screws were placed under fluoroscopic control using the manufacturer's recommended surgical technique. Compressive forces were measured during screw insertion. Recording continued for an additional 60s in order to measure any loss of compression after installation was complete. The peak and final interfragmentary compression were recorded and paired t-tests performed. RESULTS: The mean peak compression generated by the Acutrak 2 Standard was greater than that produced by the Synthes compression screw (103.9 ± 33.2 N vs. 88.7 ± 38.6 N respectively, p = 0.13). The mean final interfragmentary compression generated by the Acutrak 2 screw (68.6 ± 36.4 N) was significantly greater (p = 0.04) than the Synthes screw (37.2 ± 26.8 N). Specimens typically reached a steady state of compression by 120-150s after final tightening. CONCLUSION: Peak interfragmentary compression observed during screw installation was similar for both screw systems. However, the mean interfragmentary compression generated by the Acutrak 2 Standard was significantly greater. Our study demonstrates that the Synthes headless compression screw experienced a greater loss of interfragmentary compressive force from the time of installation to the final steady state compression level. The higher post-installation compression of the Acutrak 2 Standard may be attributable to the greater number of threads throughout the entire length of the screw. The clinical significance of these results, are, at this point uncertain. We do demonstrate that a fully threaded design offers a more reliable compression that may translate to more predictable bony union.

Perilunate injuries.

Perilunate injuries are complex injuries of the bony and ligamentous structures of the wrist. They require operative management with careful restoration of carpal alignment and open reduction and internal fixation of associated fractures. Even with optimal treatment, mild to moderate dysfunction affects most patients.

Management of isolated ulnar shaft fractures.

Isolated fractures of the ulnar shaft are common forearm injuries. Although seemingly benign, they may be complicated by nonunion, radioulnar synostosis, and loss of motion. Unstable fractures are those that are displaced more than 50 percent, angulated more than 10 degrees, or are located in the proximal third of the ulna. Stable fractures are managed well with forearm bracing. Unstable fractures are reliably treated with open reduction and internal fixation with compression plating.

Perilunate injuries.

Perilunate injuries are complex injuries of the bony and ligamentous structures of the wrist. They require operative management with careful restoration of carpal alignment and open reduction and internal fixation of associated fractures. Even with optimal treatment, mild to moderate dysfunction affects most patients.

Hemiarthroplasty of the distal ulna with an eccentric prosthesis.

Replacement arthroplasty of the ulnar head is indicated primarily for stiffness and pain as a consequence of rheumatoid, degenerative, and posttraumatic arthritis of the distal radioulnar joint. It is also successfully used in the setting of previous failed excisional arthroplasty of the distal ulna. A distal ulnar hemiarthroplasty, which anatomically recreates the native ulnar head by employing an eccentric design, is discussed. The surgical technique includes a dorsal approach and careful repair of the soft tissue stabilizers.