Fabrication of Isomorphously Substituted W-MFI Membrane with High Performance for Ethanol Separation from Water.

Isomorphous substitution of heteroatoms is an effective platform for finely tuning the pore chemistry, pore structure, and surface properties of the zeolite framework as catalysts or separation membranes. A continuous and compact isomorphously substituted tungsten (W)-MFI membrane was firstly developed on coarse α-Al2 O3 tube dip-coated with W-MFI seeds using hydrothermal secondary growth and pretreated synthesis solution. The synthesized W-MFI membrane is found to be ethanol permselective having a pervaporation based separation factor and flux of 69 and 2.50 kg/m2 h, respectively while exhibiting the highest separation index of 170 kg/m2 h for the separation of 5 wt% ethanol-water mixture among the reported heteroatoms substituted and α-Al2 O3 supported tubular MFI membranes. The isomorphous substitution of W improves the hydrophobicity and also plays a significant role for the enhanced separation performance.

Hazardous wastewater treatment by low-cost sorbent with in situ regeneration using hybrid solar energy-electrochemical system.

Hazardous industrial wastes negatively impact the environment by creating issues for aquatic as well as human's life. This study investigates the treatment of hazardous industrial wastewater using cost-effective graphite adsorbent along with electrochemical regeneration integrated with renewable solar energy. The synthetic industrial effluent containing crystal violet dye was treated using an adsorbent (Nyex™ 1000) having a surface area of 1.0 m2  g-1 . The efficiency of removing solute was found to be more than 90%. The adsorbent regeneration efficiency was achieved at 99.5% by passing a charge of 100 C g-1 at current density of 10 mA cm-2 for 1 h. Solar energy was integrated with electrochemical reactor for the regeneration of adsorbent to make the system cost-effective and self-sustainable. PRACTITIONER POINTS: Industrial hazardous wastewater treatment with a cost-effective graphite integrated adsorbent. Development of renewable solar energy-integrated with electrochemical system for regeneration. Regeneration efficiency of adsorbent Nyex™ 1000 was achieved around 99.5% with integrated system. Sustainable system was introduced to incorporate with renewable energy for waste water treatment.

Wind speed pattern data and wind energy potential in Pakistan: current status, challenging platforms and innovative prospects.

Energy is an essential parameter for the economic growth and sustainable development of any country. Due to the rapid increase in energy demand, depletion of fossil fuels and environmental concerns, many developing and developed countries are moving towards alternative renewable resources such as solar energy, wind energy and biomass. Wind energy as a renewable energy source is gaining a lot of significant attention. Wind energy is a sustainable solution to produce energy having potential benefits such as clean source, reduced toxic gases emission and environmental friendly protocol for operation. Pakistan is among the top countries facing the worst energy crisis due to different political and financial issues. Pakistan is blessed with a huge potential of wind energy having all the basic requirements such as windy regions and good wind speed for harnessing energy. Pakistan can utilize the potential of wind energy to reduce the problem of energy outrage in the country and also take steps towards green economy from conventional fuel economy. This critical review highlights the current status, potential and the steps taken in the past and present to overcome the energy shortage in Pakistan by employing wind energy. Outlook on wind speed data, deployment of wind energy, environmental effect of wind energy and its barriers in the adoption are discussed with recommendations and suggestions to utilize this clean energy in an effective way. Graphical abstract.