Stabilizing Edge Fluorination in Graphene Nanoribbons.

The on-surface synthesis of edge-functionalized graphene nanoribbons (GNRs) is challenged by the stability of the functional groups throughout the thermal reaction steps of the synthetic pathway. Edge fluorination is a particularly critical case in which the interaction with the catalytic substrate and intermediate products can induce the complete cleavage of the otherwise strong C-F bonds before the formation of the GNR. Here, we demonstrate how a rational design of the precursor can stabilize the functional group, enabling the synthesis of edge-fluorinated GNRs. The survival of the functionalization is demonstrated by tracking the structural and chemical transformations occurring at each reaction step with complementary X-ray photoelectron spectroscopy and scanning tunneling microscopy measurements. In contrast to previous attempts, we find that the C-F bond survives the cyclodehydrogenation of the intermediate polymers, leaving a thermal window where GNRs withhold more than 80% of the fluorine atoms. We attribute this enhanced stability of the C-F bond to the particular structure of our precursor, which prevents the cleavage of the C-F bond by avoiding interaction with the residual hydrogen originated in the cyclodehydrogenation. This structural protection of the linking bond could be implemented in the synthesis of other sp2-functionalized GNRs.

Control of Spin-Orbit Torques by Interface Engineering in Topological Insulator Heterostructures.

(Bi1-xSbx)2Te3 topological insulators (TIs) are gathering increasing attention owing to their large charge-to-spin conversion efficiency and the ensuing spin-orbit torques (SOTs) that can be used to manipulate the magnetization of a ferromagnet (FM). The origin of the torques, however, remains elusive, while the implications of hybridized states and the strong material intermixing at the TI/FM interface are essentially unexplored. By combining interface chemical analysis and spin-transfer ferromagnetic resonance (ST-FMR) measurements, we demonstrate that intermixing plays a critical role in the generation of SOTs. By inserting a suitable normal metal spacer, material intermixing is reduced and the TI properties at the interface are largely improved, resulting in strong variations in the nature of the SOTs. A dramatic enhancement of a field-like torque, opposing and surpassing the Oersted-field torque, is observed, which can be attributed to the non-equilibrium spin density in Rashba-split surface bands and to the suppression of spin memory loss. These phenomena can play a relevant role at other interfaces, such as those comprising transition metal dichalcogenides.

Molecular Approach for Engineering Interfacial Interactions in Magnetic/Topological Insulator Heterostructures.

Controlling interfacial interactions in magnetic/topological insulator heterostructures is a major challenge for the emergence of novel spin-dependent electronic phenomena. As for any rational design of heterostructures that rely on proximity effects, one should ideally retain the overall properties of each component while tuning interactions at the interface. However, in most inorganic interfaces, interactions are too strong, consequently perturbing, and even quenching, both the magnetic moment and the topological surface states at each side of the interface. Here, we show that these properties can be preserved using ligand chemistry to tune the interaction of magnetic ions with the surface states. By depositing Co-based porphyrin and phthalocyanine monolayers on the surface of Bi2Te3 thin films, robust interfaces are formed that preserve undoped topological surface states as well as the pristine magnetic moment of the divalent Co ions. The selected ligands allow us to tune the interfacial hybridization within this weak interaction regime. These results, which are in stark contrast with the observed suppression of the surface state at the first quintuple layer of Bi2Se3 induced by the interaction with Co phthalocyanines, demonstrate the capability of planar metal-organic molecules to span interactions from the strong to the weak limit.

Hollow PdAg-CeO2 heterodimer nanocrystals as highly structured heterogeneous catalysts.

In the present work, hollow PdAg-CeO2 heterodimer nanocrystals (NCs) were prepared and tested as catalysts for the selective hydrogenation of alkynes. These nanostructures combine for the first time the beneficial effect of alloying Pd with Ag in a single NC hollow domain with the formation of active sites at the interface with the CeO2 counterpart in an additive manner. The PdAg-CeO2 NCs display excellent alkene selectivity for aliphatic alkynes. For the specific case of hydrogenation of internal alkynes such as 4-octyne, very low over-hydrogenation and isomerization products were observed over a full conversion regime, even after prolonged reaction times. These catalytic properties were remarkably superior in comparison to standard catalysts. The promotion of Ag on the moderation of the reactivity of the Pd phase, in combination with the creation of interfacial sites with the CeO2 moiety in the same nanostructure, is pointed as the responsible of such a remarkable catalytic performance.

Towards chemically neutral carbon cleaning processes: plasma cleaning of Ni, Rh and Al reflective optical coatings and thin Al filters for free-electron lasers and synchrotron beamline applications.

The choice of a reflective optical coating or filter material has to be adapted to the intended field of application. This is mainly determined by the required photon energy range or by the required reflection angle. Among various materials, nickel and rhodium are common materials used as reflective coatings for (soft) X-ray mirrors. Similarly, aluminium is one of the most commonly used materials for extreme ultraviolet and soft X-ray transmission filters. However, both of these types of optics are subject to carbon contamination, which can be increasingly problematic for the operation of the high-performance free-electron laser and synchrotron beamlines. As an attempt to remove this type of contamination, an inductively coupled plasma source has been used in conjunction with N2/O2/H2 and N2/H2 feedstock gas plasmas. Results from the chemical surface analysis of the above materials before and after plasma treatment using X-ray photoelectron spectroscopy are reported. It is concluded that a favorable combination of an N2/H2 plasma feedstock gas mixture leads to the best chemical surface preservation of Ni, Rh and Al while removing the carbon contamination. However, this feedstock gas mixture does not remove C contamination as rapidly as, for example, an N2/O2/H2 plasma which induces the surface formation of NiO and NiOOH in Ni and RhOOH in Rh foils. As an applied case, the successful carbon removal from ultrathin Al filters previously used at the FERMI FEL1 using an N2/H2 plasma is demonstrated.

Control of the Polarization of Ferroelectric Capacitors by the Concurrent Action of Light and Adsorbates.

Ferroelectric perovskites hold promise of enhanced photovoltaic efficiency and photocatalytic activity. Consequently, the photoresponse of oxide ferroelectric thin films is an active field of research. In electrode/ferroelectric/electrode devices, internal charge in the ferroelectric, free charge in the electrodes, and buried adsorbates at interfaces combine to screen the ferroelectric polarization and to stabilize the polar state. Under illumination, photoinduced carriers and photodissociated adsorbates may disrupt the screening equilibrium, modifying the switchable polarization and altering its expected benefits. Here, we explore the photoresponse of BaTiO3 thin films in a capacitor geometry, focusing on the effects of visible illumination on the remanent polarization. By combining ferroelectric and X-ray photoelectron spectroscopy, we discover that photoreaction of charge-screening H2O-derived adsorbates at the buried metal-ferroelectric Pt/BaTiO3 interface plays an unexpected pivotal role, enabling a substantial modulation (up to 75%) of the switchable remanent polarization by light. These findings illustrate that the synergy between photochemistry and photovoltaic activity at the surface of a ferroelectric material can be exploited to tune photoferroelectric activity.

Communication: Growing room temperature ice with graphene.

Water becomes ordered in the form of hexagonal ice at room temperature under controlled humidity conditions upon confinement in the nanometer range between protective graphene sheets and crystalline (111) surfaces with hexagonal symmetry of the alkali earth fluoride BaF2. Interfacial water/substrate pseudoepitaxy turns out to be a critical parameter since ice is only formed when the lattice mismatch is small, an observation based on the absence of ice on (111) surfaces of isostructural CaF2.

High conductivity in hydrothermally grown AgCuO(2) single crystals verified using focused-ion-beam-deposited nanocontacts.

The silver-copper mixed oxide AgCuO(2) (also formulated as Ag(2)Cu(2)O(4)) possesses a peculiar electronic structure in which both Ag and Cu are partially oxidized, with the charge being delocalized among the three elements in the oxide. Accordingly, a quasi-metallic behavior should be expected for this oxide, and indeed bulk transport measurements show conductivity values that are orders of magnitude higher than for other members of this novel oxide family. The presence of silver makes thermal sintering an inadequate method to evaluate true conductivity, and thus such measurements were performed on low density pellets, giving an underestimated value for the conductivity. In the present work we present a new synthetic route for AgCuO(2) based on mild hydrothermal reactions that has yielded unprecedented large AgCuO(2) single-crystals well over 1 µm in size using temperatures as low as 88 °C. We have used a dual beam instrument to apply nanocontacts to those crystals, allowing the in situ measurement of transport properties of AgCuO(2) single crystals. The results show a linear relationship between applied current and measured voltage. The conductivity values obtained are 50 to 300 times higher than those obtained for bulk low density AgCuO(2) pellets, thus confirming the high conductivity of this oxide and therefore supporting the delocalized charge observed by spectroscopic techniques.

Combined theoretical and experimental analysis of the bonding in the heterobimetallic cubane-type Mo(3)NiS(4) and Mo(3)CuS(4) core clusters.

X-ray structural data for the cubane-type clusters [Mo3CuS4(dmpe)3Cl4](+) and Mo3NiS4(dmpe)3Cl4 (dmpe = 1,2-bis(dimethylphosphino)ethane) with 16 metal electrons have been compared with optimized structural parameters calculated using "ab initio" methodologies. Compound Mo3NiS4(dmpe)3Cl4 crystallizes in the cubic noncentrosymmetric space group P213 with a Mo-Ni distance of 2.647 Angstrom, that is 0.2 Angstrom shorter than the Mo-Cu bond length in the isoelectronic copper cluster. The best agreement between theory and experiments has been obtained using the B3P86 method. In order to validate the B3P86 results, accurate infrared and Raman spectra have been acquired and the vibrational modes associated to the cubane-type Mo3M'S4 (M' = Cu or Ni) unit have been assigned theoretically. The electronic changes taking place when incorporating the M' into the Mo3S4 unit have been analyzed from a theoretical and experimental perspective. The bond dissociation energies between M'-Cl and Mo3S4 fragments show that formation of [Mo3CuS4(dmpe)3Cl4](+) is 135 kcal/mol energetically less favorable than the Ni incorporation. The more robust nature of the Mo3NiS4 fragment has been confirmed by mass spectrometry. The X-ray photoelectron spectroscopy (XPS) spectra of the trimetallic and tetrametallic complexes have been measured and the obtained binding energies compared with the computed electronic populations based on topological approaches of the electron localization function (ELF). The energies and shapes of the Cu 2p and Ni 2p lines indicate formal oxidation states of Cu(I) and Ni(II). However, the reductive addition of nickel into [Mo3S4(dmpe)3Cl3](+) causes a small decrease in the Mo 3d binding energies. This fact prevents an unambiguous assignment of an oxidation state in a conventional way, a circumstance that has been analyzed through the covariance of the electronic populations associated to the C(M') core and V(Mo3Ni) and V(S(2)') valence basins where Mo3NiS4 is a particularly electronically delocalized chemical entity.