ABSTRACT
The purpose of the research was to evaluate Sterculia foetida gum as a hydrophilic matrix polymer for controlled release preparation. For evaluation as a matrix polymer; characterization of Sterculia foetida gum was done. Viscosity, pH, scanning electronmicrographs were determined. Different formulation aspects considered were: gum concentration (10-40%), particle size (75-420 microm) and type of fillers and those for dissolution studies; pH, and stirring speed were considered. Tablets prepared with Sterculia foetida gum were compared with tablets prepared with Hydroxymethylcellulose K15M. The release rate profiles were evaluated through different kinetic equations: zero-order, first-order, Higuchi, Hixon-Crowell and Korsemeyer and Peppas models. The scanning electronmicrographs showed that the gum particles were somewhat triangular. The viscosity of 1% solution was found to be 950 centipoise and pH was in range of 4-5. Suitable matrix release profile could be obtained at 40% gum concentration. Higher sustained release profiles were obtained for Sterculia foetida gum particles in size range of 76-125 microm. Notable influences were obtained for type of fillers. Significant differences were also observed with rotational speed and dissolution media pH. The in vitro release profiles indicated that tablets prepared from Sterculia foetida gum had higher retarding capacity than tablets prepared with Hydroxymethylcellulose K15M prepared tablets. The differential scanning calorimetry results indicated that there are no interactions of Sterculia foetida gum with diltiazem hydrochloride. It was observed that release of the drug followed through surface erosion and anomalous diffusion. Thus, it could be concluded that Sterculia foetida gum could be used a controlled release matrix polymer.
Subject(s)
Delayed-Action Preparations/chemistry , Drug Compounding/methods , Excipients/chemistry , Karaya Gum/chemistry , Plant Extracts/chemistry , Sterculia/chemistry , Diffusion , Drug Evaluation, Preclinical , Karaya Gum/administration & dosage , Kinetics , Materials TestingABSTRACT
The kinetics of Escherichia coli inactivation using ozone and ultraviolet (UV) radiation, separately and simultaneously, was evaluated at 25 degrees C in buffered (pH 6.0, 7.0 and 8.0), demand-free media. While ozone was found to be a stronger disinfectant than UV radiation, using both simultaneously was more effective than using them individually. Inactivation kinetics was pseudo first-order for the three treatment processes, while the disinfection rate was a linear function of the disinfectant dose. The synergism observed in microbial inactivation when the disinfectant processes were combined was illustrated by estimates of kinetic model parameters. This synergy was attributed to the generation of hydroxyl radicals via ozone photolysis. Subsequently, dosage calculations, as based on disinfectant level and exposure time, indicated that the simultaneous use of UV and ozone could substantially reduce their individual doses.
