Tribology of Copper Metal Matrix Composites Reinforced with Fluorinated Graphene Oxide Nanosheets: Implications for Solid Lubricants in Mechanical Switches.

The potential for the use of copper coatings on steel switching mechanisms is abundant owing to the high conductivities and corrosion resistance that they impart on the engineered assemblies. However, applications of these coatings on such moving parts are limited due to their poor tribological properties; tendencies to generate high friction and susceptibility to degradative wear. In this study, we have fabricated a fluorinated graphene oxide-copper metal matrix composite (FGO-CMMC) on an AISI 52100 bearing steel substrate by a simple electrodeposition process in water. The FGO-CMMC coatings exhibited excellent lubrication performance under pin-on-disk (PoD) tribological sliding at 1N load, which reduced CoF by 63 and 69%, compared to the GO-CMMC and pure copper coatings that were also prepared. Furthermore, FGO-CMMC achieved low friction and low wear at higher sliding loads. The lubrication enhancement of the FGO-CMMCs is attributed to the tribochemical reaction of FGO with the AISI 52100 steel counterface initiated by the sliding load. The formation of an asymmetric tribofilm structure on the sliding track is critical; the performance of the FGO/Cu tribofilm formed in the track is boosted by the continued fluorination of the counterface surface during PoD sliding, passivating the tribosystem from adhesion-driven breakdown. The FGO-CMMC and GO-CMMC coatings also provide increased corrosion protection reaching 94.2 and 91.6% compared to the bare steel substrate, allowing for the preservation of the long-term low-friction performance of the coating. Other influences include the improved interlaminar shear strength of the FGO-containing composite. The excellent lubrication performance of the copper matrix composite coatings facilitated by FGO incorporation makes it a promising solid lubricant candidate for use in mechanical engineering applications.

The synthesis and characterization of Cu2ZnSnS4 thin films from melt reactions using xanthate precursors.

Kesterite, Cu2ZnSnS4 (CZTS), is a promising absorber layer for use in photovoltaic cells. We report the use of copper, zinc and tin xanthates in melt reactions to produce Cu2ZnSnS4 (CZTS) thin films. The phase of the as-produced CZTS is dependent on decomposition temperature. X-ray diffraction patterns and Raman spectra show that films annealed between 375 and 475 °C are tetragonal, while at temperatures <375 °C hexagonal material was obtained. The electrical parameters of the CZTS films have also been determined. The conduction of all films was p-type, while the other parameters differ for the hexagonal and tetragonal materials: resistivity (27.1 vs 1.23 Ω cm), carrier concentration (2.65 × 10+15 vs 4.55 × 10+17 cm-3) and mobility (87.1 vs 11.1 cm2 V-1 s-1). The Hall coefficients were 2.36 × 103 versus 13.7 cm3 C-1.

Nanostructured Aptamer-Functionalized Black Phosphorus Sensing Platform for Label-Free Detection of Myoglobin, a Cardiovascular Disease Biomarker.

We report the electrochemical detection of the redox active cardiac biomarker myoglobin (Mb) using aptamer-functionalized black phosphorus nanostructured electrodes by measuring direct electron transfer. The as-synthesized few-layer black phosphorus nanosheets have been functionalized with poly-l-lysine (PLL) to facilitate binding with generated anti-Mb DNA aptamers on nanostructured electrodes. This aptasensor platform has a record-low detection limit (∼0.524 pg mL(-1)) and sensitivity (36 µA pg(-1) mL cm(-2)) toward Mb with a dynamic response range from 1 pg mL(-1) to 16 µg mL(-1) for Mb in serum samples. This strategy opens up avenues to bedside technologies for multiplexed diagnosis of cardiovascular diseases in complex human samples.

Asymmetric MoS2 /Graphene/Metal Sandwiches: Preparation, Characterization, and Application.

The polarizable organic/water interface is used to construct MoS2 /graphene nanocomposites, and various asymmetrically dual-decorated graphene sandwiches are synthesized. High-resolution transmission electron microscopy and 3D electron tomography confirm their structure. These dual-decorated graphene-based hybrids show excellent hydrogen evolution activity and promising capacitance performance.

Tin(II) Sulfide (SnS) Nanosheets by Liquid-Phase Exfoliation of Herzenbergite: IV-VI Main Group Two-Dimensional Atomic Crystals.

The liquid-phase exfoliation of tin(II) sulfide to produce SnS nanosheets in N-methyl-2-pyrrolidone is reported. The material is characterized by Raman spectroscopy, atomic force microscopy, lattice-resolution scanning transmission electron microscope imaging, and energy dispersive X-ray spectrum imaging. Quantum chemical calculations on the optoelectronic characteristics of bulk and 10-layer down to monolayer SnS have been performed using a quantum chemical density functional tight-binding approach. The optical properties of the SnS and centrifugally fractionated SnS nanosheet dispersions were compared to that predicted by theory. Through centrifugation, bilayer SnS nanosheets can be produced size-selectively. The scalable solution processing of semiconductor SnS nanosheets is the key to their commercial exploitation and is potentially an important step toward the realization of a future electronics industry based on two-dimensional materials.

Production of few-layer phosphorene by liquid exfoliation of black phosphorus.

We report the liquid exfoliation of black phosphorus in N-methyl-2-pyrrolidone to form few-layer phosphorene nanosheets.

Synthesis and structures of gold perfluorophthalimido complexes.

Compounds of the new tetrafluorophthalimido anion, [C(6)F(4)(CO)(2)N](-), are readily accessible by treatment of tetrafluorophthalimide with either LiNPr(i)(2) or mixtures of NEt(3) and Me(3)ECl (E = Si or Sn), to give C(6)F(4)(CO)(2)N-X (X = Li 3, SiMe(3)4, and SnMe(3)5). The reaction of the trimethylsilyl derivative 4 with AgF leads cleanly to the ion pair complex [Ag(NCMe)(2)][Ag(N(CO)(2)C(6)F(4))(2)] (6·2MeCN), which contains a linear [Ag{N(CO)(2)C(6)F(4)}(2)](-) anion and a tetracoordinate Ag(+) cation. Compound 6 reacts with iodine to give the N-iodo compound C(6)F(4)(CO)(2)NI 7, which crystallises as an acetonitrile adduct. Treatment of 6 with LAuCl affords LAu{N(CO)(2)C(6)F(4)} (L = Ph(3)P 8a, Cy(3)P 8b, or THT 9), whereas the reaction with AuCl in acetonitrile affords the heterobinuclear compound [Ag(MeCN)(2)][Au{N(CO)(2)C(6)F(4)}(2)]·MeCN (10·3MeCN). The tetrafluorophthalimido ligand is not readily displaced by donor ligands; however, the addition of B(C(6)F(5))(3)(Et(2)O) to a diethyl ether solution of 8a leads to the salt [Au(PPh(3))(2)][N{COB(C(6)F(5))(3)}(2)C(6)F(4))] 11. The analogous reaction of (THT)Au{N(CO)(2)C(6)F(4)} with B(C(6)F(5))(3) in toluene in the presence of excess norbornene (nb) gives [Au(nb)(3)][N{COB(C(6)F(5))(3)}(2)C(6)F(4))] 12. Compounds 11 and 12 contain a new non-coordinating phthalimido-bridged diborate anion with O-bonded boron atoms. The crystal structures of compounds 2-11 are reported.

Syntheses and structures of thermally stable diketiminato complexes of gold and copper.

While most metallic elements across the Periodic Table form stable chelating ß-diketiminato complexes, examples of Au(I) are conspicuous by their absence. We report here the reaction of K[HC(F(3)CC=NR)(2)] with AuCl(PPh(3)) which provides a rare example of a thermally stable gold(I) diketiminato complex, (Ph(3)P)Au[RN=C(CF(3))CH(CF(3))C=NR] [R = 3,5-C(6)H(3)(CF(3))(2)]. The complex is highly fluxional in solution but in the solid state adopts a U-conformation. By contrast, the analogous reaction of K[HC(F(3)CC=NR)(2)] with CuBr(PPh(3))(3) gives the rigid 18-electron chelate complex (Ph(3)P)(2)Cu[κ(2)-HC{(CF(3))C=NR}(2)].