Boosted formic acid electro-oxidation on platinum nanoparticles and "mixed-valence" iron and nickel oxides.

The modification of Pt nanoparticles (nano-Pt, assembled electrochemically onto a glassy carbon (GC) substrate) with hybrid multivalent nickel (nano-NiOx) and iron (nano-FeOx) oxide nanostructures was intended to steer the mechanism of the formic acid electro-oxidation (FAO) in the desirable dehydrogenation pathway. This binary modification with inexpensive oxides succeeded in mediating the reaction mechanism of FAO by boosting reaction kinetics "electron transfer" and amending the surface geometry of the catalyst against poisoning. The sequence of deposition was optimized where the a-FeOx/NiOx/Pt/GC catalyst (where "a" denotes a post-activation step for the catalyst at -0.5 V in 0.5 mol L-1 NaOH) reserved the best hierarchy. Morphologically, while nano-Pt appeared to be spherical (ca. 100 nm in average diameter), nano-NiOx appeared as flowered nanoaggregates (ca. 56 nm in average diameter) and nano-FeOx (after activation) retained a plate-like nanostructure (ca. 38 nm in average diameter and 167 nm in average length). This a-FeOx/NiOx/Pt/GC catalyst demonstrated a remarkable catalytic efficiency (125 mA mgPt-1) for FAO that was ca. 12.5 times that of the pristine Pt/GC catalyst with up to five times improvement in the catalytic tolerance against poisoning and up to -214 mV shift in the FAO's onset potential. Evidences for equipping the a-FeOx/NiOx/Pt/GC catalyst with the least charge transfer resistance and the highest stability among the whole investigated catalysts are provided and discussed.

Tailor-designed nanowire-structured iron and nickel oxides on platinum catalyst for formic acid electro-oxidation.

This investigation is concerned with designing efficient catalysts for direct formic acid fuel cells. A ternary catalyst containing iron (nano-FeOx) and nickel (nano-NiOx) nanowire oxides assembled sequentially onto a bare platinum (bare-Pt) substrate was recommended for the formic acid electro-oxidation reaction (FAOR). While nano-NiOx appeared as fibrillar nanowire bundles (ca. 82 nm and 4.2 µm average diameter and length, respectively), nano-FeOx was deposited as intersecting nanowires (ca. 74 nm and 400 nm average diameter and length, respectively). The electrocatalytic activity of the catalyst toward the FAOR depended on its composition and loading sequence. The FeOx/NiOx/Pt catalyst exhibited ca. 4.8 and 1.6 times increases in the catalytic activity and tolerance against CO poisoning, respectively, during the FAOR, relative to the bare-Pt catalyst. Interestingly, with a simple activation of the FeOx/NiOx/Pt catalyst at -0.5 V vs. Ag/AgCl/KCl (sat.) in 0.2 mol L-1 NaOH, a favorable Fe2+/Fe3+ transformation succeeded in mitigating the permanent CO poisoning of the Pt-based catalysts. Interestingly, this activated a-FeOx/NiOx/Pt catalyst had an activity 7 times higher than that of bare-Pt with an ca. -122 mV shift in the onset potential of the FAOR. The presence of nano-FeOx and nano-NiOx enriched the catalyst surface with extra oxygen moieties that counteracted the CO poisoning of the Pt substrate and electronically facilitated the kinetics of the FAOR, as revealed from CO stripping and impedance spectra.

Beyond Thin Films: Clarifying the Impact of c-Li15Si4 Formation in Thin Film, Nanoparticle, and Porous Si Electrodes.

The formation of the c-Li15Si4 phase has well-established detrimental effects on the capacity retention of thin film silicon electrodes. However, the role of this crystalline phase with respect to the loss of capacity is somewhat ambiguous in nanoscale morphologies. In this work, three silicon-based morphologies are examined, including planar films, porous planar films, and silicon nanoparticle composite powder electrodes. The cycling conditions are used as the lever to induce, or not induce, the formation of c-Li15Si4 through application of constant-current (CC) or constant-current constant-voltage (CCCV) steps. In this manner, the role of this phase on capacity retention and Coulombic efficiency can be determined with few other convoluting factors such as alteration of the composition or morphology of the silicon electrodes themselves. The results here confirm that the c-Li15Si4 phase increases the rate of capacity decay in planar films but has no major effect on capacity retention in half-cells based on porous silicon films or silicon nanoparticle composite powder electrodes, although this conclusion is nuanced. Besides using a constant-voltage step, formation of the c-Li15Si4 phase is influenced by the dimensions of the Si material and the lithiation cutoff voltage. Porous Si films, which, in this work, comprise primary Si particle sizes that are smaller than those in the preformed Si nanoparticle slurries, do not undergo the formation of c-Li15Si4 at 50 mV, whereas Si nanoparticle slurries are accompanied by the formation of c-Li15Si4 up to 80 mV. The solid-electrolyte interphase (SEI) formed from reaction of the c-Li15Si4 with the carbonate-based electrolyte causes polarization in both nanoparticle and porous film silicon electrodes and lowers the average Coulombic efficiency. A comparison of the cumulative irreversibilities due to SEI formation between different lithiation cutoff voltages in silicon nanoparticle slurry electrodes confirmed the connection between higher SEI buildup and formation of the c-Li15Si4 phase. This work indicates that concerns about the c-Li15Si4 phase in silicon nanoparticles and porous silicon electrodes should mainly focus on the stability of the SEI and a reduction of irreversible electrolyte reactions.

Bipolar Resistive Switching in Junctions of Gallium Oxide and p-type Silicon.

In this work, native GaOx is positioned between bulk gallium and degenerately doped p-type silicon (p+-Si) to form Ga/GaOx/SiOx/p+-Si junctions. These junctions show memristive behavior, exhibiting large current-voltage hysteresis. When cycled between -2.5 and 2.5 V, an abrupt insulator-metal transition is observed that is reversible when the polarity is reversed. The ON/OFF ratio between the high and low resistive states in these junctions can reach values on the order of 108 and retain the ON and OFF resistive states for up to 105 s with an endurance exceeding 100 cycles. The presence of a nanoscale layer of gallium oxide is critical to achieving reversible resistive switching by formation and dissolution of the gallium filament across the switching layer.

Submicron Emitters Enable Reliable Quantification of Weak Protein-Glycan Interactions by ESI-MS.

Interactions between carbohydrates (glycans) and glycan-binding proteins (GBPs) regulate a wide variety of important biological processes. However, the affinities of most monovalent glycan-GBP complexes are typically weak (dissociation constant (Kd) > µM) and difficult to reliably measure with conventional assays; consequently, the glycan specificities of most GBPs are not well established. Here, we demonstrate how electrospray ionization mass spectrometry (ESI-MS), implemented with nanoflow ESI emitters with inner diameters of ∼50 nm, allows for the facile quantification of low-affinity glycan-GBP interactions. The small size of the droplets produced from these submicron emitters effectively eliminates the formation of nonspecific glycan-GBP binding (false positives) during the ESI process up to ∼mM glycan concentrations. Thus, interactions with affinities as low as ∼5 mM can be measured directly from the mass spectrum. The general suppression of nonspecific adducts (including nonvolatile buffers and salts) achieved with these tips enables ESI-MS glycan affinity measurements to be performed on C-type lectins, a class of GBPs that bind glycans in a calcium-dependent manner and are important regulators of immune response. At physiologically relevant calcium ion concentrations (2-3 mM), the extent of Ca2+ nonspecific adduct formation observed using the submicron emitters is dramatically suppressed, allowing glycan affinities, and the influence of Ca2+ thereon, to be measured. Finally, we show how the use of submicron emitters and suppression of nonspecific binding enable the quantification of labile (prone to in-source dissociation) glycan-GBP interactions.

Redox Flow Batteries: How to Determine Electrochemical Kinetic Parameters.

Redox flow batteries (RFBs) are promising energy storage candidates for grid deployment of intermittent renewable energy sources such as wind power and solar energy. Various new redox-active materials have been introduced to develop cost-effective and high-power-density next-generation RFBs. Electrochemical kinetics play critical roles in influencing RFB performance, notably the overpotential and cell power density. Thus, determining the kinetic parameters for the employed redox-active species is essential. In this Perspective, we provide the background, guidelines, and limitations for a proposed electrochemical protocol to define the kinetics of redox-active species in RFBs.

Water-soluble pH-switchable cobalt complexes for aqueous symmetric redox flow batteries.

A water soluble octahedral Co(ii) complex, BCPIP-Co(ii), with 4 appended carboxylic groups on the ligand periphery is utilized as both posolyte and negolyte in an aqueous, symmetric redox flow battery (RFB). The full RFB demonstrates coulombic efficiencies >99% for up to 100 cycles.

A complex hierarchical quorum-sensing circuitry modulates phenazine gene expression in Pseudomonas aeruginosa.

INTRODUCTION: Pseudomonas aeruginosa (P. aeruginosa) modulates the expression of a myriad of virulence factors via two complicated hierarchical quorum-sensing (QS) cascade. This study shed light on the interrelation between P. aeruginosa QS systems and pyocyanin production. METHODOLOGY: Transcription analysis of lasR, rhlR, rhlI and phz genes using quantitative real time-reverse transcriptase PCR (qRT-PCR) assay, followed by sequencing of the autoinducer synthase (lasI gene) were applied for 15 P. aeruginosa strains recovered from diverse animal clinical sources. RESULTS: Expression studies revealed that most P. aeruginosa strains demonstrated statistically significant differences (p < 0.05) with a very wide range of transcript levels of QS and phz genes in comparison to P. aeruginosa ATCC 27853. We have identified significant positive correlations (r ≥ 0.3) between the expressions of QS and phz genes in eleven analyzed strains, whereas pyocyanin production positively correlated with the expression of lasR only in three strains (r ≥ 0.6). We further found that there was a negative correlation between the transcript levels of QS and phz genes in one bacterial strain. Analysis of lasI sequences showed point mutations explaining the alterations in pyocyanin expression. The deficiencies of lasI, lasR and rhlI with rhlR-dependent expression of phz in one strain were also recorded. CONCLUSIONS: These results provided new insights to the pivotal role of QS signal molecules on pyocyanin production presenting the las system as the dominant regulator.

Correction: Revealing instability and irreversibility in nonaqueous sodium-O2 battery chemistry.

Correction for 'Revealing instability and irreversibility in nonaqueous sodium-O2 battery chemistry' by Sayed Youssef Sayed et al., Chem. Commun., 2016, 52, 9691-9694.

Quantitative analyses of enhanced thermoelectric properties of modulation-doped PEDOT:PSS/undoped Si (001) nanoscale heterostructures.

Poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) has high electrical conductivity (∼103 S cm-1) but it exhibits a low Seebeck coefficient (<15 µV K-1), resulting in a low power factor. Mixing PEDOT:PSS with nanostructured semiconductors can enhance the Seebeck coefficient and achieve an improved thermoelectric power factor. However, underlying mechanisms for those composite thermoelectric systems are scarcely understood so far. In this study, quantitative analyses on the electrical conductivity and Seebeck coefficient for the heterostructures of nanometer-thick PEDOT:PSS on single-crystal Si (001) on sapphire (SOS) are reported. The heterostructures have larger Seebeck coefficients up to 7.3 fold and power factors up to 17.5 fold relative to PEDOT:PSS. The electrical conductivity increased with decreasing combined thicknesses of PEDOT:PSS and Si, and the Seebeck coefficient increased with decreasing PEDOT:PSS thickness, which can be attributed to modulation doping caused by diffusion of holes from PEDOT:PSS into undoped Si. This hypothesis is supported by simulation per band alignment. The valence band offset between Si and PEDOT:PSS dominantly controls the electrical conductivity and Seebeck coefficient of the heterostructures. This study not only suggests mechanistic insights to increase the power factors of PEDOT:PSS-based composites but also opens the door for new strategies to enhance the thermoelectric efficiencies of heterostructured nanocomposite materials.

Revealing instability and irreversibility in nonaqueous sodium-O2 battery chemistry.

Charging kinetics and reversibility of Na-O2 batteries can be influenced greatly by the particle size of NaO2 formed upon discharge, and exposure time (reactivity) of NaO2 to the electrolyte. Micrometer-sized NaO2 cubes formed at high discharge rates were charged at smaller overpotentials compared to nanometer-sized counterparts formed at low rates.

Electron transport in all-carbon molecular electronic devices.

Carbon has always been an important electrode material for electrochemical applications, and the relatively recent development of carbon nanotubes and graphene as electrodes has significantly increased interest in the field. Carbon solids, both sp(2) and sp(3) hybridized, are unique in their combination of electronic conductivity and the ability to form strong bonds to a variety of other elements and molecules. The Faraday Discussion included broad concepts and applications of carbon materials in electrochemistry, including analysis, energy storage, materials science, and solid-state electronics. This introductory paper describes some of the special properties of carbon materials useful in electrochemistry, with particular illustrations in the realm of molecular electronics. The strong bond between sp(2) conducting carbon and aromatic organic molecules enables not only strong electronic interactions across the interface between the two materials, but also provides sufficient stability for practical applications. The last section of the paper discusses several factors which affect the electron transfer kinetics at highly ordered pyrolytic graphite, some of which are currently controversial. These issues bear on the general question of how the structure and electronic properties of the carbon electrode material control its utility in electrochemistry and electron transport, which are the core principles of electrochemistry using carbon electrodes.

Bilayer molecular electronics: all-carbon electronic junctions containing molecular bilayers made with "click" chemistry.

Bilayer molecular junctions were fabricated by using the alkyne/azide "click" reaction on a carbon substrate, followed by deposition of a carbon top contact in a crossbar configuration. The click reaction on an alkyne layer formed by diazonium reduction permitted incorporation of a range of molecules into the resulting bilayer, including alkane, aromatic, and redox-active molecules, with high yield (>90%) and good reproducibility. Detailed characterization of the current-voltage behavior of bilayer molecular junctions indicated that charge transport is consistent with tunneling, but that the effective barrier does not strongly vary with molecular structure for the series of molecules studied.

Oxidative stress in skin fibroblasts cultures from patients with Parkinson's disease.

BACKGROUND: In the substantia nigra of Parkinson's disease (PD) patients, increased lipid peroxidation, decreased activities of the mitochondrial complex I of the respiratory chain, catalase and glutathione-peroxidase, and decreased levels of reduced glutathione have been reported. These observations suggest that oxidative stress and mitochondrial dysfunction play a role in the neurodegeneration in PD. We assessed enzymatic activities of respiratory chain and other enzymes involved in oxidative processes in skin fibroblasts cultures of patients with PD. METHODS: We studied respiratory chain enzyme activities, activities of total, Cu/Zn- and Mn-superoxide-dismutase, gluthatione-peroxidase and catalase, and coenzyme Q10 levels in skin fibroblasts cultures from 20 Parkinson's disease (PD) patients and 19 age- and sex- matched healthy controls. RESULTS: When compared with controls, PD patients showed significantly lower specific activities for complex V (both corrected by citrate synthase activity and protein concentrations). Oxidized, reduced and total coenzyme Q10 levels (both corrected by citrate synthase and protein concentrations), and activities of total, Cu/Zn- and Mn-superoxide-dismutase, gluthatione-peroxidase and catalase, did not differ significantly between PD-patients and control groups. Values for enzyme activities in the PD group did not correlate with age at onset, duration, scores of the Unified Parkinson's Disease Rating scales and Hoehn-Yahr staging. CONCLUSIONS: The main result of this study was the decreased activity of complex V in PD patients. This complex synthesizes ATP from ADP using an electrochemical gradient generated by complexes I-IV. These results suggest decreased energetic metabolism in fibroblasts of patients with PD.

Oxidative stress in skin fibroblasts cultures of patients with Huntington's disease.

Oxidative stress and mitochondrial dysfunction should play a role in the neurodegeneration in Huntington's disease (HD). The most consistent finding is decreased activity of the mitochondrial complexes II/III and IV of the respiratory chain in the striatum. We assessed enzymatic activities of respiratory chain enzymes and other enzymes involved in oxidative processes in skin fibroblasts cultures of patients with HD. We studied respiratory chain enzyme activities, activities of total, Cu/Zn- and Mn-superoxide-dismutase, glutathione-peroxidase (GPx) and catalase, and coenzyme Q(10) (CoQ(10)) levels in skin fibroblasts cultures from 13 HD patients and 13 age- and sex-matched healthy controls. When compared with controls, HD patients showed significantly lower specific activities for catalase corrected by protein concentrations (P < 0.01). Oxidized, reduced and total CoQ(10) levels (both corrected by citrate synthase (CS) and protein concentrations), and activities of total, Cu/Zn- and Mn-superoxide-dismutase, and gluthatione-peroxidase, did not differ significantly between HD-patients and control groups. Values for enzyme activities in the HD group did not correlate with age at onset and of the disease and with the CAG triplet repeats. The primary finding of this study was the decreased activity of catalase in HD patients, suggesting a possible contribution of catalase, but not of other enzymes related with oxidative stress, to the pathogenesis of this disease.

Possible zoophilia associated with dopaminergic therapy in Parkinson disease.

OBJECTIVE: To report a patient with Parkinson disease (PD) who developed zoophilia as a possible complication of dopaminergic therapy. CASE SUMMARY: A 74-year-old man with advanced PD, who had wearing-off motor fluctuations, with a marked disability during the off periods and severe peak-of-dose choreiform dyskinesias, developed hypersexuality with zoophilia 5 days after standard levodopa was substituted for controlled-release levodopa and the dose of bromocriptine was increased. The abnormal sexual behavior disappeared 2 days after the doses of standard levodopa and of bromocriptine were reduced. DISCUSSION: Hypersexuality is a known complication in PD patients undergoing dopaminergic therapy. However, the possible development of zoophilia due to these drugs, as was the case in our patient, is exceptional. CONCLUSIONS: Zoophilia should be considered as a possible behavioral complication of dopaminergic therapy in PD patients.