Hydrogen Bonding Shuts Down Tunneling in Hydroxycarbenes: A Gas-Phase Study by Tandem-Mass Spectrometry, Infrared Ion Spectroscopy, and Theory.

Hydroxycarbenes can be generated and structurally characterized in the gas phase by collision-induced decarboxylation of α-keto carboxylic acids, followed by infrared ion spectroscopy. Using this approach, we have shown earlier that quantum-mechanical hydrogen tunneling (QMHT) accounts for the isomerization of a charge-tagged phenylhydroxycarbene to the corresponding aldehyde in the gas phase and above room temperature. Herein, we report the results of our current study on aliphatic trialkylammonio-tagged systems. Quite unexpectedly, the flexible 3-(trimethylammonio)propylhydroxycarbene turned out to be stable─no H-shift to either aldehyde or enol occurred. As supported by density functional theory calculations, this novel QMHT inhibition is due to intramolecular H-bonding of a mildly acidic α-ammonio C-H bonds to the hydroxyl carbene's C-atom (C:···H-C). To further support this hypothesis, (4-quinuclidinyl)hydroxycarbenes were synthesized, whose rigid structure prevents this intramolecular H-bonding. The latter hydroxycarbenes underwent "regular" QMHT to the aldehyde at rates comparable to, e.g., methylhydroxycarbene studied by Schreiner et al. While QMHT has been shown for a number of biological H-shift processes, its inhibition by H-bonding disclosed here may serve for the stabilization of highly reactive intermediates such as carbenes, even as a mechanism for biasing intrinsic selectivity patterns.

Unidirectional Double- and Triple-Hydrogen Rearrangement Reactions Probed by Infrared Ion Spectroscopy.

Unidirectional double-hydrogen (2H) and triple-hydrogen (3H) rearrangement reactions occur upon electron-ionization-induced fragmentation of trans-2-(4-N,N-dimethylaminobenzyl)-1-indanol (1), trans-2-(4-methoxybenzyl)-1-indanol (2), 4-(4-N,N-dimethylaminophenyl)-2-butanol (3), and related compounds, as reported some 35 years ago (Kuck, D.; Filges, U. Org. Mass Spectrom. 1988, 23, 643-653). These unusual intramolecular redox processes were found to dominate the mass spectra of long-lived, metastable ions. The present report provides independent evidence for the structures of the product ions formed by the 2H and 3H rearrangement in an ion trap instrument. The radical cations 1•+ and 3•+ as well as ionized 1-(4-N,N-dimethylaminophenyl)-5-(4-methoxyphenyl)-3-pentanol, 5•+, were generated by electrospray ionization from anhydrous acetonitrile solutions. The 2H and 3H fragment ions were obtained by collision-induced dissociation and characterized by IR ion spectroscopy and density functional theory calculations. Comparison of the experimental and calculated infrared ion spectra enabled the identification of the 2H rearrangement product ion, C9H14N+ (m/z 136), as an N,N-dimethyl-para-toluidinium ion bearing the extra proton ortho to the amino group, a tautomer which was calculated to be 31 kJ/mol less stable than the corresponding N-protonated form. The 3H rearrangement product ion, C8H13N•+ (m/z 123), formerly assumed to be a distonic ammonium ion bearing a cyclohexadienyl radical, was now identified as a conventional radical cation, ionized N,N-dimethyl-2,3-dihydro-para-toluidine. Thus, the 3H rearrangement represents an intramolecular transfer hydrogenation between a secondary alcohol and an ionized aromatic ring. Based on these structural assignments, more detailed mechanisms for the unidirectional 2H and 3H rearrangement reactions are proposed.

Breslow Intermediates (Amino Enols) and Their Keto Tautomers: First Gas-Phase Characterization by IR Ion Spectroscopy.

Breslow intermediates (BIs) are the crucial nucleophilic amino enol intermediates formed from electrophilic aldehydes in the course of N-heterocyclic carbene (NHC)-catalyzed umpolung reactions. Both in organocatalytic and enzymatic umpolung, the question whether the Breslow intermediate exists as the nucleophilic enol or in the form of its electrophilic keto tautomer is of utmost importance for its reactivity and function. Herein, the preparation of charge-tagged Breslow intermediates/keto tautomers derived from three different types of NHCs (imidazolidin-2-ylidenes, 1,2,4-triazolin-5-ylidenes, thiazolin-2-ylidenes) and aldehydes is reported. An ammonium charge tag is introduced through the aldehyde unit or the NHC. ESI-MS IR ion spectroscopy allowed the unambiguous conclusion that in the gas phase, the imidazolidin-2-ylidene-derived BI indeed exists as a diamino enol, while both 1,2,4-triazolin-5-ylidenes and thiazolin-2-ylidenes give the keto tautomer. This result coincides with the tautomeric states observed for the BIs in solution (NMR) and in the crystalline state (XRD), and is in line with our earlier calculations on the energetics of BI keto-enol equilibria.

IRMPD Spectroscopic and Theoretical Structural Investigations of Zinc and Cadmium Dications Bound to Histidine Dimers.

Metallated gas-phase structures consisting of a deprotonated and an intact histidine (His) ligand, yielding M(His-H)(His)+, where M = Zn and Cd, were examined with infrared multiple photon dissociation (IRMPD) action spectroscopy utilizing light from a free-electron laser (FEL). In parallel, quantum chemical calculations identified several low-energy isomers for each complex. Experimental action spectra were compared to linear spectra calculated at the B3LYP level of theory using the 6-311+G(d,p) and def2-TZVP basis sets for the zinc and cadmium complexes, respectively. For both Zn and Cd species, the definitive assignment is complicated by conflicting relative energetics, which were calculated at B3LYP, B3LYP-GD3BJ, B3P86, and MP2(full) levels. Spectral comparison for both species indicates that the dominant conformation, [Nα,Nπ,CO-][CO2-](NπH+), has the deprotonated His chelating the metal at the amine nitrogen, π nitrogen of the imidazole ring, and the deprotonated carbonyl oxygen and that the intact His ligand adopts a salt-bridge bidentate binding motif, coordinating the metal with both carboxylate oxygens. There is also evidence for a conformation where the deprotonated His coordination is maintained, but the intact His ligand adopts a more canonical structure, coordinating with the metal atom at the amine nitrogen and π nitrogen, [Nα,Nπ,CO-][Nα,Nπ]gtgg. For both metallated species, B3LYP, B3P86, and B3LYP-GD3BJ levels of theory appear to describe the relative stability of the dominant zwitterionic species more accurately than the MP2(full) level.

The Isotope-Labeled, MS-Cleavable Cross-Linker Disuccinimidyl Dibutyric Urea for Improved Cross-Linking/Mass Spectrometry Studies.

Previous studies have shown the benefits of the amine-reactive, CID-MS/MS-cleavable cross-linker disuccinimidyl dibutyric urea (DSBU) for structural proteomics studies via cross-linking/MS (XL-MS). To further facilitate the automation of XL-MS experiments, we synthesized a deuterated (D12) version of the DSBU cross-linker combining the advantages of MS-cleavable linkers and isotope labeling. The rationale of conducting XL-MS with a mixture of unlabeled and stable isotope-labeled DSBU is to obtain characteristic mass differences at the MS level indicating cross-linked species. These cross-linked species can then be selected for fragmentation by collisional activation. At the MS/MS level, the characteristic 26-u doublets arising from cleavage of the central urea group in DSBU confirm the amino acid sequences of cross-linked peptides as well as the exact cross-linking sites. D12-labeled DSBU was tested on three systems with increasing complexity: (i) bovine serum albumin as purified protein, (ii) Escherichia coli ribosome as large, multimeric protein assembly, and (iii) Drosophila embryo extract as complete proteome. We demonstrate the benefits arising from the use of isotope-labeled DSBU for an automated assignment of cross-linked products. Combining isotope labeling and MS cleavability in one cross-linker resulted in higher cross-link identification numbers especially for highly complex protein mixtures.

Olefinic reagents tested for peptide derivatization with switchable properties: Stable upon collision induced dissociation and cleavable by in-source Paternò-Büchi reactions.

This contribution is part of our ongoing efforts to develop innovative cross-linking (XL) reagents and protocols for facilitated peptide mixture analysis and efficient assignment of cross-linked peptide products. In this report, we combine in-source Paternò-Büchi (PB) photo-chemistry with a tandem mass spectrometry approach to selectively address the fragmentation of a tailor-made cross-linking reagent. The PB photochemistry, so far exclusively used for the identification of unsaturation sites in lipids and in lipidomics, is now introduced to the field of chemical cross-linking. Based on trans-3-hexenedioic acid, an olefinic homo bifunctional amine reactive XL reagent was designed and synthesized for this proof-of-principle study. Condensation products of the olefinic reagent with a set of exemplary peptides are used to test the feasibility of the concept. Benzophenone is photochemically reacted in the nano-electrospray ion source and forms oxetane PB reaction products. Subsequent CID-MS triggered retro-PB reaction of the respective isobaric oxetane molecular ions and delivers reliably and predictably two sets of characteristic fragment ions of the cross-linker. Based on these signature ion sets, a straightforward identification of covalently interconnected peptides in complex digests is proposed. Furthermore, CID-MSn experiments of the retro-PB reaction products deliver peptide backbone characteristic fragment ions. Additionally, the olefinic XL reagents exhibit a pronounced robustness upon CID-activation, without previous UV-excitation. These experiments document that a complete backbone fragmentation is possible, while the linker-moiety remains intact. This feature renders the new olefinic linkers switchable between a stable, noncleavable cross-linking mode and an in-source PB cleavable mode.

Hydrogen tunneling avoided: enol-formation from a charge-tagged phenyl pyruvic acid derivative evidenced by tandem-MS, IR ion spectroscopy and theory.

A charge-tagged phenyl pyruvic acid derivative was investigated by tandem-MS, infrared (IR) ion spectroscopy and theory. The tailor-made precursor ions efficiently lose CO2 in collision induced dissociation (CID) experiments, offering access to study the secondary decay reactions of the product ions. IR ion spectroscopy provides evidence for the formation of an enol acid precursor ion structure in the gas phase and indicates the presence of enol products formed after CO2 loss. Extensive DFT computations however, suggest intermediate generation of hydroxycarbene products, which in turn rearrange in a secondary process to the enol ions detected by IR ion spectroscopy. Quantum mechanical tunneling of the hydroxycarbene can be excluded since no evidence for aldehyde product ion formation could be found. This finding is in contrast to the behavior of methylhydroxycarbene, which cleanly penetrates the energy barrier to form exclusively acetaldehyde at cryogenic temperatures in an argon matrix via quantum mechanical hydrogen tunneling. The results presented here are attributed to the highly excited energy levels of the product ions formed by CID in combination with different barrier heights of the competing reaction channels, which allow exclusive access over one energy barrier leading to the formation of the enol tautomer ions observed.

Free radical-initiated peptide sequencing (FRIPS)-based cross-linkers for improved peptide and protein structure analysis.

Free radical-initiated peptide sequencing (FRIPS) has recently been introduced as an analytical strategy to create peptide radical ions in a predictable and effective way by collisional activation of specifically modified peptides ions. FRIPS is based on the unimolecular dissociation of open-shell ions and yields fragments that resemble those obtained by electron capture dissociation (ECD) or electron transfer dissociation (ETD). In this review article, we describe the fundamentals of FRIPS and highlight its fruitful combination with chemical cross-linking/mass spectrometry (MS) as a highly promising option to derive complementary structural information of peptides and proteins. FRIPS does not only yield exhaustive sequence information of cross-linked peptides, but also defines the exact cross-linking sites of the connected peptides. The development of more advanced FRIPS cross-linkers that extend the FRIPS-based cross-linking/MS approach to the study of large protein assemblies and protein interaction networks can be eagerly anticipated.

Intermediates of N-Heterocyclic Carbene (NHC) Dimerization Probed in the Gas Phase by Ion Mobility Mass Spectrometry: C-H⋠⋠⋠:C Hydrogen Bonding Versus Covalent Dimer Formation.

N-Heterocyclic carbenes (NHCs, :C) can interact with azolium salts (C-H+ ) by either forming a hydrogen-bonded aggregate (CHC+ ) or a covalent C-C bond (CCH+ ). In this study, the intramolecular NHC-azolium salt interactions of aromatic imidazolin-2-ylidenes and saturated imidazolidin-2-ylidenes have been investigated in the gas phase by traveling wave ion mobility mass spectrometry (TW IMS) and DFT calculations. The TW IMS experiments provided evidence for the formation of these important intermediates in the gas phase, and they identified the predominant aggregation mode (hydrogen bond vs. covalent C-C) as a function of the nature of the interacting carbene-azolium pairs.

A cross-linking/mass spectrometry workflow based on MS-cleavable cross-linkers and the MeroX software for studying protein structures and protein-protein interactions.

Chemical cross-linking in combination with mass spectrometric analysis of the created cross-linked products is an emerging technology aimed at deriving valuable structural information from proteins and protein complexes. The goal of our protocol is to obtain distance constraints for structure determination of proteins and to investigate protein-protein interactions. We present an integrated workflow for cross-linking/mass spectrometry (MS) based on protein cross-linking with MS-cleavable reagents, followed by enzymatic digestion, enrichment of cross-linked peptides by strong cation-exchange chromatography (SCX), and LC/MS/MS analysis. To exploit the full potential of MS-cleavable cross-linkers, we developed an updated version of the freely available MeroX software for automated data analysis. The commercially available, MS-cleavable cross-linkers (DSBU and CDI) used herein possess different lengths and react with amine as well as hydroxy groups. Owing to the formation of two characteristic 26-u doublets in their MS/MS spectra, many fewer false positives are found than when using classic, non-cleavable cross-linkers. The protocol, exemplified herein for BSA and the whole Escherichia coli ribosome, is robust and widely applicable, and it allows facile identification of cross-links for deriving spatial constraints from purified proteins and protein complexes. The cross-linking/MS procedure takes 2-3 days to complete.

Software-aided quality control of parallel reaction monitoring based quantitation of lipid mediators.

We characterized the performance of a micro-flow LC-ESI-MS2 approach to analyze lipid mediators (LMs) and polyunsaturated fatty acids (PUFA) that was optimized for SPE free lipid extraction. Tandem mass spectrometry was exclusively performed in parallel reaction monitoring (PRM) mode using TOF and Orbitrap analyzers. This acquisition strategy allowed in addition to quantitation by specific quantifier ions to perform spectrum comparisons using full MS2 spectra information of the analyte. Consequently, we developed a dedicated software SpeCS that allows to 1) process raw peak lists, 2) generate customized spectral libraries, 3) test specificity of quantifier ions and 4) perform spectrum comparisons. The dedicated scoring algorithm is based on signal matching and Spearman's rank correlation of intensities of matched signal. The algorithm was evaluated in respect of its specificity to distinguish structural related LMs on both instrument platforms. We show how high resolution mass spectrometry is beneficial to distinguish co-eluted LM isomers and provide a generalized quality control procedure for PRM. The applicability of the approach was evaluated analyzing the lipid mediator response during M. tuberculosis infection in the mouse lung.

Ergothioneine stands out from hercynine in the reaction with singlet oxygen: Resistance to glutathione and TRIS in the generation of specific products indicates high reactivity.

The candidate vitamin ergothioneine (ET), an imidazole-2-thione derivative of histidine betaine, is generally considered an antioxidant. However, the precise physiological role of ET is still unresolved. Here, we investigated in vitro the hypothesis that ET serves specifically to eradicate noxious singlet oxygen (1O2). Pure 1O2 was generated by thermolysis at 37°C of N,N'-di(2,3-dihydroxypropyl)-1,4-naphthalenedipropanamide 1,4-endoperoxide (DHPNO2). Assays of DHPNO2 with ET or hercynine (= ET minus sulfur) at pH 7.4 were analyzed by LC-MS in full scan mode to detect products. Based on accurate mass and product ion scan data, several products were identified and then quantitated as a function of time by selected reaction monitoring. All products of hercynine contained, after a [4+2] cycloaddition of 1O2, a carbonyl at position 2 of the imidazole ring. By contrast, because of the doubly bonded sulfur, we infer from the products of ET as the initial intermediates a 4,5-dioxetane (after [2+2] cycloaddition) and hydroperoxides at position 4 and 5 (after Schenck ene reactions). The generation of single products from ET, but not from hercynine, was fully resistant to a large excess of tris(hydroxymethyl)aminomethane (TRIS) or glutathione (GSH). This suggests that 1O2 markedly favors ET over GSH (at least 50-fold) and TRIS (at least 250-fold) for the initial reaction. Loss of ET was almost abolished in 5mM GSH, but not in 25mM TRIS. Regeneration of ET seems feasible, since some ET products - by contrast to hercynine products - decomposed easily in the MS collision cell to become aromatic again.

Ergothioneine and related histidine derivatives in the gas phase: tautomer structures determined by IRMPD spectroscopy and theory.

l-Ergothioneine (ET) is a sulfur-containing derivative of the amino acid histidine that offers unique antioxidant properties. The enzyme independent redox-chemistry of ET relies on the availability of the thiol tautomer to allow oxidative formation of disulfide bridges, i.e., the tautomeric equilibrium. To study the intrinsic properties of ET the tautomeric equilibrium is studied in the gas-phase by infrared multiphoton dissociation (IRMPD) spectroscopy. The IR ion spectra of isolated molecular ions of ET and of the biosynthetic precursors of ET, i.e., hercynine and Nε-methyl-hercynine are acquired. The analyte structures are independently investigated by density functional theory (DFT) and computed linear IR-spectra of tautomer ion structures are compared with the gas-phase spectra for identification. For the molecular ion of ET the simulated IR spectra of thione and thiol structures match the recorded IRMPD spectrum and that prevents an individual structure assignment. On the other hand, theory suggests that ET adopts a thione tautomer in MeOH solution which could be carried over from the condensed phase to gas phase and could be kinetically trapped after effective electrospray phase transfer and desolvation. Such a non-thermal behavior is also found for the molecular ions of protonated hercynine and Nε-methyl-hercynine. Contrary to that, the sodium complex ions of ET, hercynine and Nε-methyl-hercynine adopt the respective ground structures predicted by theory, which are reliably identified spectroscopically. For ET the thione tautomer is by far the most stable isomer in the sodium complex molecular ion.

A Novel MS-Cleavable Azo Cross-Linker for Peptide Structure Analysis by Free Radical Initiated Peptide Sequencing (FRIPS).

The chemical cross-linking/mass spectrometry (MS) approach is a growing research field in structural proteomics that allows gaining insights into protein conformations. It relies on creating distance constraints between cross-linked amino acid side chains that can further be used to derive protein structures. Currently, the most urgent task for designing novel cross-linking principles is an unambiguous and automated assignment of the created cross-linked products. Here, we introduce the homobifunctional, amine-reactive, and water soluble cross-linker azobisimidoester (ABI) as a prototype of a novel class of cross-linkers. The ABI-linker possesses an innovative modular scaffold combining the benefits of collisional activation lability with open shell chemistry. This MS-cleavable cross-linker can be efficiently operated via free radical initiated peptide sequencing (FRIPS) in positive ionization mode. Our proof-of-principle study challenges the gas phase behavior of the ABI-linker for the three amino acids, lysine, leucine, and isoleucine, as well as the model peptide thymopentin. The isomeric amino acids leucine and isoleucine could be discriminated by their characteristic side chain fragments. Collisional activation experiments were conducted via positive electrospray ionization (ESI) on two Orbitrap mass spectrometers. The ABI-mediated formation of odd electron product ions in MS/MS and MS3 experiments was evaluated and compared with a previously described azo-based cross-linker. All cross-linked products were amenable to automated analysis by the MeroX software, underlining the future potential of the ABI-linker for structural proteomics studies. Graphical Abstract ᅟ.

Novel Concepts of MS-Cleavable Cross-linkers for Improved Peptide Structure Analysis.

The chemical cross-linking/mass spectrometry (MS) approach is gaining increasing importance as an alternative method for studying protein conformation and for deciphering protein interaction networks. This study is part of our ongoing efforts to develop innovative cross-linking principles for a facile and efficient assignment of cross-linked products. We evaluate two homobifunctional, amine-reactive, and MS-cleavable cross-linkers regarding their potential for automated analysis of cross-linked products. We introduce the bromine phenylurea (BrPU) linker that possesses a unique structure yielding a distinctive fragmentation pattern on collisional activation. Moreover, BrPU delivers the characteristic bromine isotope pattern and mass defect for all cross-linker-decorated fragments. We compare the fragmentation behavior of the BrPU linker with that of our previously described MS-cleavable TEMPO-Bz linker (which consists of a 2,2,6,6-tetramethylpiperidine-1-oxy moiety connected to a benzyl group) that was developed to perform free-radical-initiated peptide sequencing. Comparative collisional activation experiments (collision-induced dissociation and higher-energy collision-induced dissociation) with both cross-linkers were conducted in negative electrospray ionization mode with an Orbitrap Fusion mass spectrometer using five model peptides. As hypothesized in a previous study, the presence of a cross-linked N-terminal aspartic acid residue seems to be the prerequisite for the loss of an intact peptide from the cross-linked products. As the BrPU linker combines a characteristic mass shift with an isotope signature, it presents a more favorable combination for automated assignment of cross-linked products compared with the TEMPO-Bz linker. ᅟ.

Hydrogen Tunneling above Room Temperature Evidenced by Infrared Ion Spectroscopy.

While hydrogen tunneling at elevated temperatures has, for instance, often been postulated in biochemical processes, spectroscopic proof is thus far limited to cryogenic conditions, under which thermal reactivity is negligible. We report spectroscopic evidence for H-tunneling in the gas phase at temperatures around 320-350 K observed in the isomerization reaction of a hydroxycarbene into an aldehyde. The charge-tagged carbene was generated in situ in a tandem mass spectrometer by decarboxylation of oxo[4-(trimethylammonio)phenyl]acetic acid upon collision induced dissociation. All ion structures involved are characterized by infrared ion spectroscopy and quantum chemical calculations. The charge-tagged phenylhydroxycarbene undergoes a 1,2-H-shift to the corresponding aldehyde with an half-life of about 10 s, evidenced by isomer-selective two-color (IR-IR) spectroscopy. In contrast, the deuterated (OD) carbene analogue showed much reduced 1,2-D-shift reactivity with an estimated half-life of at least 200 s under the experimental conditions, and provides clear evidence for hydrogen atom tunneling in the H-isotopologue. This is the first spectroscopic confirmation of hydrogen atom tunneling governing 1,2-H-shift reactions at noncryogenic temperatures, which is of broad significance for a range of (bio)chemical processes, including enzymatic transformations and organocatalysis.

An Integrated Mass Spectrometry Based Approach to Probe the Structure of the Full-Length Wild-Type Tetrameric p53 Tumor Suppressor.

We present an integrated approach for investigating the topology of proteins through native mass spectrometry (MS) and cross-linking/MS, which we applied to the full-length wild-type p53 tetramer. For the first time, the two techniques were combined in one workflow to obtain not only structural insight in the p53 tetramer, but also information on the cross-linking efficiency and the impact of cross-linker modification on the conformation of an intrinsically disordered protein (IDP). P53 cross-linking was monitored by native MS and as such, our strategy serves as a quality control for different cross-linking reagents. Our approach can be applied to the structural investigation of various protein systems, including IDPs and large protein assemblies, which are challenging to study by the conventional methods used for protein structure characterization.

Dissociation Behavior of a TEMPO-Active Ester Cross-Linker for Peptide Structure Analysis by Free Radical Initiated Peptide Sequencing (FRIPS) in Negative ESI-MS.

We have synthesized a homobifunctional amine-reactive cross-linking reagent, containing a TEMPO (2,2,6,6-tetramethylpiperidine-1-oxy) and a benzyl group (Bz), termed TEMPO-Bz-linker, to derive three-dimensional structural information of proteins. The aim for designing this novel cross-linker was to facilitate the mass spectrometric analysis of cross-linked products by free radical initiated peptide sequencing (FRIPS). In an initial study, we had investigated the fragmentation behavior of TEMPO-Bz-derivatized peptides upon collision activation in (+)-electrospray ionization collision-induced dissociation tandem mass spectrometry (ESI-CID-MS/MS) experiments. In addition to the homolytic NO-C bond cleavage FRIPS pathway delivering the desired odd-electron product ions, an alternative heterolytic NO-C bond cleavage, resulting in even-electron product ions mechanism was found to be relevant. The latter fragmentation route clearly depends on the protonation of the TEMPO-Bz-moiety itself, which motivated us to conduct (-)-ESI-MS, CID-MS/MS, and MS3 experiments of TEMPO-Bz-cross-linked peptides to further clarify the fragmentation behavior of TEMPO-Bz-peptide molecular ions. We show that the TEMPO-Bz-linker is highly beneficial for conducting FRIPS in negative ionization mode as the desired homolytic cleavage of the NO-C bond is the major fragmentation pathway. Based on characteristic fragments, the isomeric amino acids leucine and isoleucine could be discriminated. Interestingly, we observed pronounced amino acid side chain losses in cross-linked peptides if the cross-linked peptides contain a high number of acidic amino acids. Graphical Abstract ᅟ.

Integrated Workflow for Structural Proteomics Studies Based on Cross-Linking/Mass Spectrometry with an MS/MS Cleavable Cross-Linker.

Cross-linking combined with mass spectrometry (MS) has evolved as an alternative strategy in structural biology for characterizing three-dimensional structures of protein assemblies and for mapping protein-protein interactions. Here, we describe an integrated workflow for an automated identification of cross-linked products that is based on the use of a tandem mass spectrometry (MS/MS) cleavable cross-linker (containing a 1,3-bis-(4-oxo-butyl)-urea group, BuUrBu) generating characteristic doublet patterns upon fragmentation. We evaluate different fragmentation methods available on an Orbitrap Fusion mass spectrometer for three proteins and an E. coli cell lysate. An updated version of the dedicated software tool MeroX was employed for a fully automated identification of cross-links. The strength of our cleavable cross-linker is that characteristic patterns of the cross-linker as well as backbone fragments of the connected peptides are already observed at the MS/MS level, eliminating the need for conducting MS(3) or sequential CID (collision-induced dissociation)- and ETD (electron transfer dissociation)-MS/MS experiments. This makes our strategy applicable to a broad range of mass spectrometers with MS/MS capabilities. For purified proteins and protein complexes, our workflow using CID-MS/MS acquisition performs with high confidence, scoring cross-links at 0.5% false discovery rate (FDR). The cross-links provide structural insights into the intrinsically disordered tetrameric tumor suppressor protein p53. As a time-consuming manual inspection of cross-linking data is not required, our workflow will pave the way for making the cross-linking/MS approach a routine technique for structural proteomics studies.

Approaches to prepare perfluoroalkyl and pentafluorophenyl copper couples for cross-coupling reactions with organohalogen compounds.

The reactions of iodoperfluoroalkanes CnF2n+1I (n = 2, 3, 4) and n-BuLi at low temperatures give NMR spectroscopic evidence for LiCnF2n+1 which were converted into LiCu(CnF2n+1)2 derivatives upon treatment with 0.5 mol copper(i) bromide, CuBr. An alternative route to obtain perfluoroorgano copper couples, Cu(Rf)2Ag (Rf = n-C3F7, n-C4F9, C6F5) was achieved from the reactions of the corresponding perfluoroorgano silver(i) reagents, AgRf, and elemental copper through redox transmetallations. The composition of the resulting reactive intermediates was investigated by means of (19)F NMR spectroscopy and ESI mass spectrometry. Perfluoro-n-propyl and perfluoro-n-butyl copper-silver reagents prepared by the oxidative transmetallation route exhibited good properties in C-C bond formation reactions with acid chlorides even under moderate conditions. Substitution of bromine directly bound to aromatics for perfluoroalkyl groups was achieved at elevated temperatures, while success in halide substitution reactions using lithium copper couples remained poor.