Formation of nanoflowers: Au and Ni silicide cores surrounded by SiO x branches.

This work reports the formation of nanoflowers after annealing of Au/Ni bilayers deposited on SiO2/Si substrates. The cores of the nanoflowers consist of segregated Ni silicide and Au parts and are surrounded by SiO x branches. The SiO2 decomposition is activated at 1050 °C in a reducing atmosphere, and it can be enhanced more by Au compared to Ni. SiO gas from the decomposition of SiO2 and the active oxidation of Si is the source of Si for the growth of the SiO x branches of the nanoflowers. The concentration of SiO gas around the decomposition cavities is inhomogeneously distributed. Closer to the cavity border, the concentration of the Si sources is higher, and SiO x branches grow faster. Hence, nanoflowers present shorter and shorter branches as they are getting away from the border. However, such inhomogeneous SiO gas concentration is weakened in the sample with the highest Au concentration due to the strong ability of Au to enhance SiO2 decomposition, and nanoflowers with less difference in their branches can be observed across the whole sample.

Exfoliated 2D Layered and Nonlayered Metal Phosphorous Trichalcogenides Nanosheets as Promising Electrocatalysts for CO2 Reduction.

Two-dimensional (2D) materials catalysts provide an atomic-scale view on a fascinating arena for understanding the mechanism of electrocatalytic carbon dioxide reduction (CO2 ECR). Here, we successfully exfoliated both layered and nonlayered ultra-thin metal phosphorous trichalcogenides (MPCh3 ) nanosheets via wet grinding exfoliation (WGE), and systematically investigated the mechanism of MPCh3 as catalysts for CO2 ECR. Unlike the layered CoPS3 and NiPS3 nanosheets, the active Sn atoms tend to be exposed on the surfaces of nonlayered SnPS3 nanosheets. Correspondingly, the nonlayered SnPS3 nanosheets exhibit clearly improved catalytic activity, showing formic acid selectivity up to 31.6 % with -7.51 mA cm-2 at -0.65 V vs. RHE. The enhanced catalytic performance can be attributed to the formation of HCOO* via the first proton-electron pair addition on the SnPS3 surface. These results provide a new avenue to understand the novel CO2 ECR mechanism of Sn-based and MPCh3 -based catalysts.

Plasma-Assisted Fabrication of Molecularly Imprinted NiAl-LDH Layer on Ni Nanorod Arrays for Glyphosate Detection.

An inorganic-framework molecularly imprinted NiAl layered double hydroxide (MI-NiAl-LDH) with specific template molecule (glyphosate pesticide, Glyp) recognition ability was prepared on Ni nanorod arrays (Ni NRAs) through electrodeposition followed by a low-temperature O2 plasma treatment. The freestanding Ni/MI-NiAl-LDH NRA electrode had highly enhanced sensitivity and selectivity. The electrocatalytic oxidation of Glyp was proposed to occur at Ni3+ centers in MI-NiAl-LDH, and the current response depended linearly on the Glyp concentration from 10.0 nmol/L to 1.0 µmol/L (R2 = 0.9906), with the limit of detection (LOD) being 3.1 nmol/L (S/N = 3). An exceptional discriminating capability with tolerance for other similar organophosphorus compounds was achieved. Molecular imprinting (N and P residues) affected the electronic structure of NiAl-LDH, triggering the formation of highly active NiOOH sites at relatively lower anodic potentials and substantially enhancing the electrocatalytic oxidation ability of the NiAl-LDH interface toward the C-N bonds in Glyp. In combination with the surface enrichment effect of MI-NiAl-LDH toward template molecules, the electrochemical oxidation signal intensity of Glyp increased significantly, with a greater peak separation from interfering molecules. These results challenge the common belief that the excellent performance of inorganic-framework molecularly imprinted interfaces arises from their specific adsorption of template molecules, providing new insight into the development of high-performance organic-pollutant-sensing electrodes.

Evaluating the Optical Response of Heavily Decorated Black Silicon Based on a Realistic 3D Modeling Methodology.

Combining black silicon (BS), a nanostructured silicon containing highly roughened surface morphology with plasmonic materials, is becoming an attractive approach for greatly enhancing light-matter interactions with promising applications of sensing and light harvesting. However, precisely describing the optical response of a heavily decorated BS structure is still challenging due to the increasing complexity in surface morphology and plasmon hybridization. Here, we propose and fully characterize BS-based multistacked nanostructures with randomly distributed nanoparticles on the highly roughened nonflat surface. We demonstrate a realistic 3D modeling methodology based on parametrized scanning electron microscopy images that provides high-precision morphology details, successfully linking the theoretical analysis with experimental optical response of the complex nanostructures. Far-field calculations very nicely reproduce experimental reflectance spectra, revealing the dependency of light trapping on the thickness of the conformal reflector and the atop nanoparticle size. Near-field analysis clearly identifies three types of stochastic "hotspots". Their contribution to the overall field enhancement is shown to be very much sensitive to the nanoscale surface morphology. The simulated near-field property is then used to examine the measured surface-enhanced Raman scattering (SERS) response on the multistacked structures. The present modeling approach combined with spectroscopic characterizations is expected to offer a powerful tool for the precise description of the optical response of other large-scale highly disordered realistic 3D systems.

Black Silver: Three-Dimensional Ag Hybrid Plasmonic Nanostructures with Strong Photon Coupling for Scalable Photothermoelectric Power Generation.

The conversion of solar energy into electric power has been extensively studied, for example, by photovoltaics. However, photo-thermoelectric (P-TE) conversion as an effective solar-to-electricity conversion process is less studied. Here, we present an efficient full-solar-spectrum plasmonic absorber for scalable P-TE conversion based on a simple integration of light absorber and commercial thermoelectric modules. Our developed light absorber of silica-silver hybrid structures achieves an average absorption of 99.4% in the wavelength range from 200 to 2500 nm, which covers over 98% solar energy in this range. It thus appears fully matte black and is named black silver. The light absorber includes a hierarchical structure with Ag nanoparticles attached on three-dimensional SiO2 nanostructures, resulting in ultrahigh absorption. Strong localized surface plasmon resonance hybridization together with multiple scattering causes the perfect light absorption. Using the black silver as a light absorber for P-TE power generation, it can achieve a peak voltage density as high as 82.5 V m-2 under a solar intensity of 100 mW cm-2, which is large enough to power numerous electronic devices. By assembling 20 thermoelectric modules in series, we test their possibility of practical application, and they can also achieve an average voltage density of 70.66 V m-2. Our work opens up a promising technology that facilitates high-efficiency and scalable solar energy conversion via the P-TE effect.

Tailoring Patterned Visible-Light Scattering by Silicon Photonic Crystals.

Searching for the relationship between the nanostructure and optical properties has always been exciting the researchers in the field of optics (linear optics as well as non-linear optics), energy harvesting (anti-reflective Si solar cells, perovskite solar cells, ..., etc.), and industry (anti-reflection coating on car windows, sunglasses, etc.). In this work, we present an approach for nanostructuring the silicon substrate to silicon photonic crystals. By precisely controlling the etching time and etching path after using nanoimprint lithography, ordered arrays of inverted Si nanopyramids and Si nanopillars with good homogeneity, uniform surface roughness, high reproducibility of pattern transfer, and a controllable aspect ratio are prepared. Experimental investigation of the optical properties indicates that the reflections of these Si nanostructures are mainly determined by the aspect ratio as well as the period of nanostructures. Furthermore, we have experimentally observed visible-light scattering (V-LS) patterns on inverted Si nanopyramids and Si nanopillars, and their corresponding patterns can be precisely controlled by the patterned nanostructures. The V-LS pattern, background, and "ghost peaks" on the angle-resolved scattering results are caused by constructive interference, destructive interference, and the interference situation between both. This controllable nanopatterning on crystalline Si substrates with precisely tunable optical properties shows great potential for applications in many fields, for example, optics, electronics, and energy.

Influence of Initial Temperature and Convective Heat Loss on the Self-Propagating Reaction in Al/Ni Multilayer Foils.

A two-dimensional numerical model for self-propagating reactions in Al/Ni multilayer foils was developed. It was used to study thermal properties, convective heat loss, and the effect of initial temperature on the self-propagating reaction in Al/Ni multilayer foils. For model adjustments by experimental results, these Al/Ni multilayer foils were fabricated by the magnetron sputtering technique with a 1:1 atomic ratio. Heat of reaction of the fabricated foils was determined employing Differential Scanning Calorimetry (DSC). Self-propagating reaction was initiated by an electrical spark on the surface of the foils. The movement of the reaction front was recorded with a high-speed camera. Activation energy is fitted with these velocity data from the high-speed camera to adjust the numerical model. Calculated reaction front temperature of the self-propagating reaction was compared with the temperature obtained by time-resolved pyrometer measurements. X-ray diffraction results confirmed that all reactants reacted and formed a B2 NiAl phase. Finally, it is predicted that (1) increasing thermal conductivity of the final product increases the reaction front velocity; (2) effect of heat convection losses on reaction characteristics is insignificant, e.g., the foils can maintain their characteristics in water; and (3) with increasing initial temperature of the foils, the reaction front velocity and the reaction temperature increased.

Ancient viral genomes reveal introduction of human pathogenic viruses into Mexico during the transatlantic slave trade.

After the European colonization of the Americas, there was a dramatic population collapse of the Indigenous inhabitants caused in part by the introduction of new pathogens. Although there is much speculation on the etiology of the Colonial epidemics, direct evidence for the presence of specific viruses during the Colonial era is lacking. To uncover the diversity of viral pathogens during this period, we designed an enrichment assay targeting ancient DNA (aDNA) from viruses of clinical importance and applied it to DNA extracts from individuals found in a Colonial hospital and a Colonial chapel (16th-18th century) where records suggest that victims of epidemics were buried during important outbreaks in Mexico City. This allowed us to reconstruct three ancient human parvovirus B19 genomes and one ancient human hepatitis B virus genome from distinct individuals. The viral genomes are similar to African strains, consistent with the inferred morphological and genetic African ancestry of the hosts as well as with the isotopic analysis of the human remains, suggesting an origin on the African continent. This study provides direct molecular evidence of ancient viruses being transported to the Americas during the transatlantic slave trade and their subsequent introduction to New Spain. Altogether, our observations enrich the discussion about the etiology of infectious diseases during the Colonial period in Mexico.

The arrival of European colonists to the Americas, beginning in the 15^th century, contributed to the spread of new viruses amongst Indigenous people. This led to massive outbreaks of disease, and millions of deaths that caused an important Native population to collapse. The exact viruses that caused these outbreaks are unknown, but smallpox, measles, and mumps are all suspected. During these times, traders and colonists forcibly enslaved and displaced millions of people mainly from the West Coast of Africa to the Americas. The cruel, unsanitary, and overcrowded conditions on ships transporting these people across the Atlantic contributed to the spread of infectious diseases onboard. Once on land, infectious diseases spread quickly, partly due to the poor conditions that enslaved and ndigenous people were made to endure. Native people were also immunologically naïve to the newly introduced pathogens, making them susceptible to severe or fatal outcomes. The new field of paleovirology may help scientists identify the viruses that were circulating in the first years of colonization and trace how viruses arrived in the Americas. Using next-generation DNA sequencing and other cutting-edge techniques, Guzmán-Solís et al. extracted and enriched viral DNA from skeletal remains dating back to the 16^th century. These remains were found in mass graves that were used to bury epidemic victims at a colonial hospital and chapel in what is now Mexico City. The experiments identified two viruses, human parvovirus B19 and a human hepatitis B virus. These viral genomes were recovered from human remains of first-generation African people in Mexico, as well as an individual who was an Indigenous person. Although the genetic material of these ancient viruses resembled pathogens that originated in Africa, the study did not determine if the victims died from these viruses or another cause. On the other hand, the results indicate that viruses frequently found in modern Africa were circulating in the Americas during the slave trade period of Mexico. Finally, the results provide evidence that colonists who forcibly brought African people to the Americas participated in the introduction of viruses to Mexico. This constant influx of viruses from the old world, led to dramatic declines in the populations of Indigenous people in the Americas.

Solid-State Dewetting of Gold on Stochastically Periodic SiO2 Nanocolumns Prepared by Oblique Angle Deposition.

Solid-state dewetting (SSD) on patterned substrates is a straightforward method for fabricating ordered arrays of metallic nanoparticles on surfaces. However, a drawback of this procedure is that the patterning of substrates usually requires time-consuming and expensive two-dimensional (2D) fabrication methods. Nanostructured thin films deposited by oblique angle deposition (OAD) present at the surface a form of stochastically arranged periodic bundles of nanocolumns that might act as a patterned template for fabricating arrays of nanoparticles by SSD. In this work, we explore this concept and investigate the effect of three different types of OAD SiO2 thin films on the SSD of Au deposited on their surface. We demonstrate that the size and spatial distribution of the particles can be tailored through the surface morphology of these OAD film substrates. It has been found that the SSD of the evaporated Au layer gives rise to a bimodal size distribution of particles. A majority of them appeared as mesoparticles with sizes ≳100 nm and the rest as nanoparticles with ∼10 nm, respectively, located either on top of the nanocolumns following their lateral distribution (i.e., resulting from a patterning effect) or incorporated inside the open mesopores existing among them. Moreover, on the SiO2-OAD thin films where interconnected nanocolumnar bundles arrange in the form of discrete motifs, the patterning effect gave rise to the formation of approximately one Au mesoparticle per motif, which is one of the assets of patterned SSD. The morphological, optical (i.e., plasmon resonance), and crystalline structural characteristics of Au mesoparticles suggest that the interplay between a discontinuous nanocolumnar surface acting as a template and the poor adhesion of Au onto SiO2 are key factors for the observed template effect controlling the SSD on the surface of OAD thin films.

Photo-Thermoelectric Conversion Using Black Silicon with Enhanced Light Trapping Performance far beyond the Band Edge Absorption.

During the past years, much research work has been focused on efficiently harvesting solar energy with black silicon (b-Si). However, semiconductor Si can only utilize solar energy with wavelength smaller than λ = 1110 nm (bandgap Eg = 1.12 eV) for photovoltaic applications or photoelectrochemical conversions. Light with wavelength beyond the band edge (above λ = 1110 nm) cannot be used. Here, we prepared highly conductive b-Si without an apparent optical bandgap by a reactive ion etching process, which can largely absorb light with a wide range wavelength and even far into the near-infrared region (∼2500 nm). The optimized b-Si with surface texture shows the specular reflection rate lower than 0.1% and the average total reflection (specular reflectance + diffuse reflectance) is about 1.1%. Additionally, we briefly introduce the mechanism and reflection principle of surface nanostructured b-Si. By using b-Si structured material, we successfully convert the solar energy to electric power via photo-thermoelectric conversion, especially solar energy exceeding 1110 nm wavelength can also be efficiently used. The excellent light trapping of sunlight shows great potential for photothermal applications, such as photothermal imaging, seawater desalination, and further applications.

Metastable Atomic Layer Deposition: 3D Self-Assembly toward Ultradark Materials.

Black body materials are promising candidates to meet future energy demands, as they are able to harvest energy from the total bandwidth of solar radiation. Here, we report on high-absorption near-blackbody-like structures (>98% for a wide solar spectrum range from 220 to 2500 nm) consisting of a silica scaffold and Ag nanoparticles with a layer thickness below 10 µm, fabricated using metastable atomic layer deposition (MS-ALD). Several effects contribute collectively and in a synergistic manner to the ultrahigh absorption, including the pronounced heterogeneity of the nanoparticles in size and shape, particle plasmon hybridization, and the trapping of omnidirectionally scattered light in the 3D hierarchical hybrid structures. We propose that, in the future, MS-ALD needs to be considered as a simple and promising method to fabricate blackbody materials with excellent broadband absorption.

Hydrogen-nitrogen plasma assisted synthesis of titanium dioxide with enhanced performance as anode for sodium ion batteries.

Sodium ion batteries are considered as one of the most promising energy storage devices as lithium ion batteries due to the natural abundance of sodium. TiO2 is very popular as anode materials for both lithium and sodium ion batteries because of the nontoxicity, safety and great stabilities. However, the low electronic conductivities and inferior sodium ion diffusion make it becoming a great challenge to develop advanced TiO2 anodes. Doping heteroatoms and incorporation of defects are believed to be great ways to improve the electrochemical performance of TiO2 anodes. In this work, commercial TiO2 (P25) nanoparticles was modified by hydrogen and nitrogen high-power plasma resulting in a disordered surface layer formation and nitrogen doping as well. The electrochemical performances of the samples as anode materials for sodium ion batteries was measured and the results indicated that after the hydrogen-nitrogen plasma treatment, H-N-TiO2 electrode shows a 43.5% of capacity higher than the P-TiO2 after 400 cycles long-term discharge/charge process, and the samples show a good long cycling stability as well, the Coulombic efficiencies of all samples are nearly 99% after 50 cycles which could be sustained to the end of long cycling. In addition, hydrogen-nitrogen plasma treated TiO2 electrode reached the stable high Coulombic efficiency earlier than the pristine material. High resolution TEM images and XPS results indicate that there is a disordered surface layer formed after the plasma treatment, by which defects (oxygen vacancies) and N-doping are also introduced into the crystalline structure. All these contribute to the enhancement of the electrochemical performance.

Nonlinear plasmon-exciton coupling enhances sum-frequency generation from a hybrid metal/semiconductor nanostructure.

The integration of metallic plasmonic nanoantennas with quantum emitters can dramatically enhance coherent harmonic generation, often resulting from the coupling of fundamental plasmonic fields to higher-energy, electronic or excitonic transitions of quantum emitters. The ultrafast optical dynamics of such hybrid plasmon-emitter systems have rarely been explored. Here, we study those dynamics by interferometrically probing nonlinear optical emission from individual porous gold nanosponges infiltrated with zinc oxide (ZnO) emitters. Few-femtosecond time-resolved photoelectron emission microscopy reveals multiple long-lived localized plasmonic hot spot modes, at the surface of the randomly disordered nanosponges, that are resonant in a broad spectral range. The locally enhanced plasmonic near-field couples to the ZnO excitons, enhancing sum-frequency generation from individual hot spots and boosting resonant excitonic emission. The quantum pathways of the coupling are uncovered from a two-dimensional spectrum correlating fundamental plasmonic excitations to nonlinearly driven excitonic emissions. Our results offer new opportunities for enhancing and coherently controlling optical nonlinearities by exploiting nonlinear plasmon-quantum emitter coupling.

Strong Spatial and Spectral Localization of Surface Plasmons in Individual Randomly Disordered Gold Nanosponges.

Porous nanosponges, percolated with a three-dimensional network of 10 nm sized ligaments, recently emerged as promising substrates for plasmon-enhanced spectroscopy and (photo)catalysis. Experimental and theoretical work suggests surface plasmon localization in some hot-spot modes as the physical origin of their unusual optical properties, but so far the existence of such hot-spots has not been proven. Here we use scattering-type scanning near-field nanospectroscopy on individual gold nanosponges to reveal spatially and spectrally confined modes at 10 nm scale by recording local near-field scattering spectra. High quality factors of individual hot-spots of more than 40 are demonstrated, predicting high Purcell factors up to 106. The observed field localization and enhancement make such nanosponges an appealing platform for a variety of applications ranging from nonlinear optics to strong-coupling physics.

Plasmonic Horizon in Gold Nanosponges.

An electromagnetic wave impinging on a gold nanosponge coherently excites many electromagnetic hot-spots inside the nanosponge, yielding a polarization-dependent scattering spectrum. In contrast, a hole, recombining with an electron, can locally excite plasmonic hot-spots only within a horizon given by the lifetime of localized plasmons and the speed carrying the information that a plasmon has been created. This horizon is about 57 nm, decreasing with increasing size of the nanosponge. Consequently, photoluminescence from large gold nanosponges appears unpolarized.

Hierarchically-Designed 3D Flower-Like Composite Nanostructures as an Ultrastable, Reproducible, and Sensitive SERS Substrate.

Surface-enhanced Raman spectroscopy (SERS) is an attractive tool in the analytical sciences due to its high specificity and sensitivity. Because SERS-active substrates are only available as two-dimensional arrays, the fabrication of three-dimensional (3D) nanostructures allows for an increased number of hot spots in the focus volume, thus further amplifying the SERS signal. Although a great number of fabrication strategies for powerful SERS substrates exist, the generation of 3D nanostructures with high complexity and periodicity is still challenging. For this purpose, we report an easy fabrication technique for 3D nanostructures following a bottom-up preparation protocol. Enzymatically generated silver nanoparticles (EGNPs) are prepared, and the growth of hierarchically-designed 3D flower-like silica-silver composite nanostructures is induced by applying plasma-enhanced atomic layer deposition (PE-ALD) on the EGNPs. The morphology of these nanocomposites can be varied by changes in the PE-ALD cycle number, and a flower height of up to 10 µm is found. Moreover, the metallized (e.g., silver or gold) 3D nanostructures resulting from 135 PE-ALD cycles of silica creation provide highly reproducible SERS signals across the hydrophobic surface. Within this contribution, the morphological studies, optical properties, as well as the SERS response of these metallized silica-silver composite nanostructures applying vitamin B2 as a model analyte are introduced.

Nanoporous Gold Nanoparticles and Au/Al2O3 Hybrid Nanoparticles with Large Tunability of Plasmonic Properties.

Nanoporous gold nanoparticles (NPG-NPs) with controlled particle size and pore size are fabricated via a combination of solid-state dewetting and a subsequent dealloying process. Because of the combined effects of size and porosity, the NPG-NPs exhibit greater plasmonic tunability and significantly higher local field enhancement as compared to solid NPs. The effects of the nanoscale porosity and pore size on the optical extinction are investigated for the NPG-NPs with different particle sizes experimentally and theoretically. The influences of both porosity and pore size on the plasmonic properties are very complicated and clearly different for small particles with dominated dipole mode and large particles with dominated quadrupole mode. Au/Al2O3 hybrid porous NPs with controlled porosity and composition ratio are fabricated through plasma-enhanced atomic layer deposition of Al2O3 into the porous structure. In the Au/Al2O3 hybrid porous NPs, both Au and Al2O3 components are bicontinuously percolated over the entire structure. A further red shift of the plasmon peak is observed in the hybrid NPs due to the change of the environmental refractive index. The high tunability of the plasmonic resonances in the NPG-NPs and the hybrid porous NPs can be very useful for many applications in sensing biological and organic molecules.

Long-lived electron emission reveals localized plasmon modes in disordered nanosponge antennas.

We report long-lived, highly spatially localized plasmon states on the surface of nanoporous gold nanoparticles-nanosponges-with high excitation efficiency. It is well known that disorder on the nanometer scale, particularly in two-dimensional systems, can lead to plasmon localization and large field enhancements, which can, in turn, be used to enhance nonlinear optical effects and to study and exploit quantum optical processes. Here, we introduce promising, three-dimensional model systems for light capture and plasmon localization as gold nanosponges that are formed by the dewetting of gold/silver bilayers and dealloying. We study light-induced electron emission from single nanosponges, a nonlinear process with exponents of n≈5...7, using ultrashort laser pulse excitation to achieve femtosecond time resolution. The long-lived electron emission process proves, in combination with optical extinction measurements and finite-difference time-domain calculations, the existence of localized modes with lifetimes of more than 20 fs. These electrons couple efficiently to the dipole antenna mode of each individual nanosponge, which in turn couples to the far-field. Thus, individual gold nanosponges are cheap and robust disordered nanoantennas with strong local resonances, and an ensemble of nanosponges constitutes a meta material with a strong polarization independent, nonlinear response over a wide frequency range.

Approaching Gas Phase Electrodeposition: Process and Optimization to Enable the Self-Aligned Growth of 3D Nanobridge-Based Interconnects.

A nanowire bonding process referred to as gas-phase electrodeposition is reported to form nanobridge-based interconnects. The process is able to grow free-standing point-to-point electrical connections using metallic wires. As a demonstration, programmable interconnects and an interdigitated electrode array are shown. The process is more material efficient when compared with conventional vapor deposition since the material is directed to the point of use.

Optical Plasmons of Individual Gold Nanosponges.

The search for novel plasmonic nanostructures, which can act simultaneously as optical detectors and stimulators, is crucial for many applications in the fields of biosensing, electro- and photocatalysis, electrochemistry, and biofuel generation. In most of these areas, a large surface-to-volume ratio, as well as high density of active surface sites, is desirable. We investigate sponge-like, that is, fully porous, nanoparticles, called nanosponges, where both the gold and the air phase are fully percolated in three dimensions. We correlate, on a single nanoparticle basis, their optical scattering spectra (using dark field microscopy) with their individual morphology (using electron microscopy). We find that the scattering spectra of nanosponges depend only weakly on their size and outer shape, but are greatly influenced by their unique percolation, in qualitative agreement with numerical simulations.