Association and relaxation of supra-macromolecular polymers.

This paper describes the structures created by assembling functionalised entangled polymers and the effect these have on the rheology of the material. A polybutadiene (PBd) linear polymer precursor of sufficient molecular weight to be entangled is used. This is end functionalised with the self-associating group 2-ureido-4pyrimidinone (UPy). Interestingly, despite the relatively high molecular weight of the precursor diluting the UPy concentration, the effect on the material's properties is significant. To characterise the assembled microstructure we present linear rheology, extensional non-linear rheology and small angle X-ray scattering (SAXS). The linear rheology shows that the functionalised PBd assembles into large macro-structures where the terminal relaxation time is up to seven orders of magnitude larger than the precursor. The non-linear rheology shows strain-hardening over a broad range of strain-rates. We then show by both SAXS and modelling of the extensional data that there must exist clusters of UPy associations and hence assembled polymers with branched architecture. By modelling the supra-molecular structure as an effective linear polymer, we show that this would be insufficient in predicting the strain-hardening behaviour at lower extension-rates. Therefore, in this flow regime the strain-hardening is likely to be caused by branching. This is backed up by SAXS measurements which show that UPy clusters larger than pair-pair groups exist.

Molecular Weight Dependence of Interdiffusion and Adhesion of Polymers at Short Contact Times.

The autohesion and subsequent debonding of thin layers of three linear and monodisperse random copolymers of styrene-butadiene (SBR) with molecular weights varying between 30 and 75 times the average molecular weight between entanglements Me were investigated using a carefully controlled tack adhesion testing device in conjunction with a fast camera setup over a range of contact times tc (10 ms to 10 s) much shorter in comparison to the terminal relaxation times of the polymers. The evolution of the stress-strain curves and debonding mechanisms with increasing contact time was examined, and the work required to debond the layers was found to be strongly dependent on molecular weight at long contact times, but not at short contact times. We propose a cutoff contact time of 300 ms, corresponding to 104 times the entanglement time τe after which molecular weight becomes important in controlling the interdiffusion process and the debonding mechanisms of the tack test. For contact times over 300 ms, the debonding energy plotted as a function of tc normalized by the reptation time τrep, collapses onto a master curve. Below this threshold tc, by comparing the adhesion of SBR on itself with the adhesion of SBR on glass, we also show that interdiffusion plays a part in adhesion of two identical polymer layers even at the shortest contact times, where the interdiffusion is controlled by the number of entanglements formed which scales with 1/√N.