Non-linear optical microscopy and histological analysis of collagen, elastin and lysyl oxidase expression in breast capsular contracture.

BACKGROUND: Capsular contracture is one of the most common complications in surgical interventions for aesthetic breast augmentation or post-mastectomy breast reconstruction involving the use of silicone prostheses. Although the precise cause of capsular contracture is yet unknown, the leading hypothesis is that it is caused by long-term unresolved foreign body reaction towards the silicone breast implant. To authors' best knowledge, this is the first study that elucidates the presence of lysyl oxidase (LOX)-an enzyme that is involved in collagen and elastin crosslinking within fibrous capsules harvested from patients with severe capsular contracture. It was hypothesized that over-expression of LOX plays a role in the irreversible crosslinking of collagen and elastin which, in turn, stabilizes the fibrous proteins and contributes to the progression of capsular contracture. METHODS: Eight fibrous capsules were collected from patients undergoing capsulectomy procedure, biomechanical testing was performed for compressive Young's moduli and evaluated for Type I and II collagen, elastin and LOX by means of non-linear optical microscopy and immunohistology techniques. RESULTS: Observations revealed the heterogeneity of tissue structure within and among the collected fibrous capsules. Regardless of the tissue structure, it has been shown that LOX expression was intensified at the implant-to-tissue interface. CONCLUSION: Our results indicate the involvement of LOX in the initiation of fibrous capsule formation which ultimately contributes towards the progression of capsular contracture.

[Soft tissue fillers: state of the art and future perspectives]. / Injizierbare Füllmaterialien ­ Update und Zukunftsperspektive.

In addition to cosmetic use, filler materials are frequently employed for reconstruction of contour defects. Scars and tissue defects after accidents, surgery and irradiation are also ideal indications for injectables. The ideal filler should be easy to inject, easy to form, and should remain in the body as long as possible. It should neither be allergenic or carcinogenic nor susceptible to infections or biofilms, but still potentially reversible, temperature-stable, and cheap. There is still no augmentation material that fulfils all of these criteria. A wide range of materials with widely varying characteristics is available on the market. Hyaluronic acid, collagen (human or bovine), polylactic acid (PLLA), calcium hydroxyapatite (CaHA), polymethylmethacrylate (PMMA), silicone and natural fat are all used in clinical practice for various indications. The current research efforts carried out at industrial institutions and universities are directed towards the development of augmentation materials with higher biocompatibility on the one hand and better durability on the other. In this review we provide an overview on filler materials currently used with their pros and cons. We further give an outlook on promising new approaches in the development pipeline.

Microneedle physical contact as a therapeutic for abnormal scars.

BACKGROUND: Abnormal (keloid and hypertrophic) scars are a significant affliction with no satisfactory single modality therapy to-date. Available options are often ineffective, painful, potentially hazardous, and require healthcare personnel involvement. Herein a self-administered microneedle device based on drug-free physical contact for inhibiting abnormal scars is reported. Its therapeutic activity through microneedle contact eliminates hazards associated with toxic anti-scarring drugs while self-treatment enables administration flexibility. METHODS: The microneedle patch was fabricated with FDA-approved liquid crystalline polymer under good manufacturing practice. It was first tested to ascertain its ability to inhibit (keloid) fibroblast proliferation. Later the microneedle patch was examined on the rabbit ear hypertrophic scar model to explore its potential in inhibiting the generation of abnormal scars post-injury. Finally, the microneedle patch was applied to the caudal region of a hypertrophic scar located on a female patient's dorsum to verify clinical efficacy. RESULTS: On untreated control cultures, barely any non-viable fibroblasts could be seen. After 12-h treatment with the microneedle patch, the non-viable proportion increased to 83.8 ± 11.96%. In rabbit ear hypertrophic scar model, 100% of the control wounds without the presence of patches on rabbit ears generated regions of raised dermis originating from the wound site (3/3), whereas microneedle treatment prevented dermis tissue thickening in 83.33% of the wounds (15/18). In the clinical test, the microneedle patch was well tolerated by the patient. Compared to the untreated region, microneedle treatment decreased the number of infiltrated inflammatory cells, with less disrupted dermis tissue architecture and more flattened appearance. CONCLUSIONS: A self-administered, drug-free microneedle patch appears highly promising in reducing abnormal scarring as observed from in vitro, in vivo and clinical experiments. Larger cohort clinical studies need to be performed to validate its efficacy on abnormal scars.

Cartilage engineering in reconstructive surgery: auricular, nasal and tracheal engineering from a surgical perspective.

This review provides an update on cartilage tissue engineering with particular focus on the head and neck. It is aimed at scientists and clinicians who are interested in tissue engineering and its clinical applicability. Principal tissue engineering strategies are summarized in the first part of this review. In the second part, current clinical approaches to auricular, nasal and tracheal reconstruction are discussed from a surgical perspective. By this approach, the requirements for clinical applicability are outlined and new insight into relevant aims of research is given to accelerate the transfer from bench to bedside.

Breast Augmentation and Reconstruction from a Regenerative Medicine Point of View: State of the Art and Future Perspectives.

Breast reconstruction and augmentation are very common procedures, yet the prevailing current methods utilize silicone implants that may have significant local complications requiring reoperation. Lipofillling is increasingly used to contour and is considered safe, however, its utility is limited by significant volume loss. A new approach could offer an alternative and increase the scope of patient choice. A small number of teams around the world are investigating a breast tissue engineering (TE) paradigm. Conventional breast TE concepts are based on seeding a scaffold with the patients' own stem cells. However, the clinical viability of many of these approaches is limited by their costs in relevant volumes. In this article the state of the art of tissue-engineered breast reconstruction is reviewed and future perspectives are presented and discussed.

Donor-dependent variances of human adipose-derived stem cells in respect to the in-vitro endothelial cell differentiation capability.

Human adipose-derived stem cells (ASC) have been shown to differentiate into mature adipocytes and to play an important role in creating the vasculature, necessary for white adipose tissue to function. To study the stimulatory capacity of ASC on endothelial progenitor cells we used a commercially available co-culture system (V2a - assay). ASC, isolated from lipoaspirates of 18 healthy patients, were co-cultured for 13 d on endothelial progenitor cells. Using anti CD31 immunostaining, cells that had undergone endothelial differentiation were quantified after the defined co-cultivation period. Endothelial cell differentiation was observed and demonstrated by an increase in area covered by CD31+ cells compared with less to no endothelial cell differentiation in negative and media-only controls. Enzyme-linked immunosorbent assay (ELISA) for vascular endothelial growth factor (VEGF) in supernatant medium collected during the co-cultivation period revealed elevated VEGF levels in the co-culture samples as compared with ASC cultures alone, whereas no increase in adiponectin was detected by ELISA. These findings help to provide further insights in the complex interplay of adipose derived cells and endothelial cells and to better understand the diversity of ASCs in respect of their stimulatory capacity to promote angiogenesis in vitro.

Polylactides in additive biomanufacturing.

New advanced manufacturing technologies under the alias of additive biomanufacturing allow the design and fabrication of a range of products from pre-operative models, cutting guides and medical devices to scaffolds. The process of printing in 3 dimensions of cells, extracellular matrix (ECM) and biomaterials (bioinks, powders, etc.) to generate in vitro and/or in vivo tissue analogue structures has been termed bioprinting. To further advance in additive biomanufacturing, there are many aspects that we can learn from the wider additive manufacturing (AM) industry, which have progressed tremendously since its introduction into the manufacturing sector. First, this review gives an overview of additive manufacturing and both industry and academia efforts in addressing specific challenges in the AM technologies to drive toward AM-enabled industrial revolution. After which, considerations of poly(lactides) as a biomaterial in additive biomanufacturing are discussed. Challenges in wider additive biomanufacturing field are discussed in terms of (a) biomaterials; (b) computer-aided design, engineering and manufacturing; (c) AM and additive biomanufacturing printers hardware; and (d) system integration. Finally, the outlook for additive biomanufacturing was discussed.

Tissue engineering and regenerative medicine in musculoskeletal oncology.

Currently used surgical techniques to reconstruct tissue defects after resection of musculoskeletal tumours are associated with high complication rates. This drives a strong demand for innovative therapeutic concepts that are able to improve the clinical outcomes of patients suffering from bone and soft tissue tumours. Tissue engineering and regenerative medicine (TE&RM) provides a technology platform based on biochemical, molecular, cellular and biomaterials modules to selectively direct tissue healing processes for improved defect regeneration. At the same time, precautionary measures have to be taken when these instruments are used in cancer patients to prevent any promotion of tumour growth or metastatic spread. On the other hand, several innovative TE&RM tools are being developed such as multi-functionalized biomaterials, drug-delivering nanomaterials or genetically engineered stem cells that per se have the potential to mediate anti-cancer effects, act synergistically with currently used chemotherapeutics and/or radiotherapy regimens and reduce their side effects. Recently, scientists became conscious that TE&RM strategies may not only be utilized to advance contemporary tissue reconstruction techniques but also to develop personalized diagnostic tools and clinically relevant disease models for cancer patients. Eventually, prospective randomized clinical trials combined with comparative outcome analyses are a conditio sine qua non to shape the benefits of personalized regenerative therapies for the standardized management of patients with musculoskeletal tumours.

Transformation of Breast Reconstruction via Additive Biomanufacturing.

Adipose tissue engineering offers a promising alternative to current breast reconstruction options. However, the conventional approach of using a scaffold in combination with adipose-derived precursor cells poses several problems in terms of scalability and hence clinical feasibility. Following the body-as-a-bioreactor approach, this study proposes a unique concept of delayed fat injection into an additive biomanufactured and custom-made scaffold. Three study groups were evaluated: Empty scaffold, Scaffold containing 4 cm(3) lipoaspirate and Empty scaffold +2-week prevascularisation period. In group 3, of prevascularisation, 4 cm(3) of lipoaspirate was injected into scaffolds after 2 weeks. Using a well-characterised additive biomanufacturing technology platform, patient-specific scaffolds made of medical-grade-polycaprolactone were designed and fabricated. Scaffolds were implanted in subglandular pockets in immunocompetent minipigs (n = 4) for 24-weeks. Angiogenesis and adipose tissue regeneration were observed in all constructs. Histological evaluation showed that the prevascularisation + lipoaspirate group had the highest relative area of adipose tissue (47.32% ± 4.12) which was significantly higher than both lipoaspirate-only (39.67% ± 2.04) and empty control group (8.31% ± 8.94) and similar to native breast tissue (44.97% ± 14.12). This large preclinical animal study provides proof-of-principle that the clinically applicable prevascularisation and delayed fat-injection techniques can be used for regeneration of large volumes of adipose tissue.

Additive manufacturing in biomedical sciences and the need for definitions and norms.

The application of additive biomanufacturing represents one of the most rapidly advancing areas of biomedical science, in which engineers, scientists, and clinicians are contributing to the future of health care. The combined efforts of a large number of groups around the globe have developed a strong research thrust that has resulted in a large number of publications. Reviewing this body of literature, there is an increasing trend of research groups inventing their own definitions and terminology. This has made it difficult to find and compare the results. Therefore, to move the field constructively forward, it is a conditio sine qua non to clarify various terminologies and standards. Based on this background, this article advocates tightening the terminology and has the objective of penning out definitions that will ultimately allow the development of official industry standard terms, such as American Society for Testing and Materials and or International Organization for Standardization for technologies developed for Tissue Engineering and Regenerative Medicine.

A Novel Bioresorbable Implant for Repair of Orbital Floor Fractures.

PURPOSE: To describe clinical, radiologic, and safety outcomes of orbital floor fracture repair using a novel bioresorbable polycaprolactone (PCL) mesh implant (Osteomesh™, Osteopore International, Singapore). METHODS: This is a prospective interventional case series of orbital floor fractures repaired using a novel PCL mesh implant. Clinical evaluation was conducted at presentation and postoperatively at 1, 4, 12, 24 and 48 weeks. Computed tomography (CT) of the orbits was performed 1 year postoperatively. RESULTS: A total of 20 patients were recruited. Mean follow up was 50.4 ± 31.88 weeks. The majority of the patients were male (60%) and of Chinese ethnicity (75%), and the mean age was 39.35 (range 13-69) years. The most common mechanism of injury was assault. The average fracture size was 21.9 mm (range 12-32 mm) in the anteroposterior meridian and 18.65 mm (range 6-27 mm) in the horizontal meridian. Fifty percent of the patients were classified as having a large orbital defect (horizontal width ≥20 mm). The binocular single vision (BSV) score improved from 72.1% preoperatively to 90.8% postoperatively (P < 0.05) for 17 patients who had pre and postoperative charts. BSV improvement did not differ significantly between those with large and small orbital fracture sizes. There were features of neobone formation on CT scan performed 1.5 years after implantation. CONCLUSION: This bioresorbable implant is a promising material for the repair of both small and large orbital floor fractures, giving good functional and aesthetic outcomes.

Can bone tissue engineering contribute to therapy concepts after resection of musculoskeletal sarcoma?

Resection of musculoskeletal sarcoma can result in large bone defects where regeneration is needed in a quantity far beyond the normal potential of self-healing. In many cases, these defects exhibit a limited intrinsic regenerative potential due to an adjuvant therapeutic regimen, seroma, or infection. Therefore, reconstruction of these defects is still one of the most demanding procedures in orthopaedic surgery. The constraints of common treatment strategies have triggered a need for new therapeutic concepts to design and engineer unparalleled structural and functioning bone grafts. To satisfy the need for long-term repair and good clinical outcome, a paradigm shift is needed from methods to replace tissues with inert medical devices to more biological approaches that focus on the repair and reconstruction of tissue structure and function. It is within this context that the field of bone tissue engineering can offer solutions to be implemented into surgical therapy concepts after resection of bone and soft tissue sarcoma. In this paper we will discuss the implementation of tissue engineering concepts into the clinical field of orthopaedic oncology.

How smart do biomaterials need to be? A translational science and clinical point of view.

Over the last 4 decades innovations in biomaterials and medical technology have had a sustainable impact on the development of biopolymers, titanium/stainless steel and ceramics utilized in medical devices and implants. This progress was primarily driven by issues of biocompatibility and demands for enhanced mechanical performance of permanent and non-permanent implants as well as medical devices and artificial organs. In the 21st century, the biomaterials community aims to develop advanced medical devices and implants, to establish techniques to meet these requirements, and to facilitate the treatment of older as well as younger patient cohorts. The major advances in the last 10 years from a cellular and molecular knowledge point of view provided the scientific foundation for the development of third-generation biomaterials. With the introduction of new concepts in molecular biology in the 2000s and specifically advances in genomics and proteomics, a differentiated understanding of biocompatibility slowly evolved. These cell biological discoveries significantly affected the way of biomaterials design and use. At the same time both clinical demands and patient expectations continued to grow. Therefore, the development of cutting-edge treatment strategies that alleviate or at least delay the need of implants could open up new vistas. This represents the main challenge for the biomaterials community in the 21st century. As a result, the present decade has seen the emergence of the fourth generation of biomaterials, the so-called smart or biomimetic materials. A key challenge in designing smart biomaterials is to capture the degree of complexity needed to mimic the extracellular matrix (ECM) of natural tissue. We are still a long way from recreating the molecular architecture of the ECM one to one and the dynamic mechanisms by which information is revealed in the ECM proteins in response to challenges within the host environment. This special issue on smart biomaterials lists a large number of excellent review articles which core is to present and discuss the basic sciences on the topic of smart biomaterials. On the other hand, the purpose of our review is to assess state of the art and future perspectives of the so called "smart biomaterials" from a translational science and specifically clinical point of view. Our aim is to filter out and discuss which biomedical advances and innovations help us to achieve the objective to translate smart biomaterials from bench to bedside. The authors predict that analyzing the field of smart biomaterials from a clinical point of view, looking back 50 years from now, it will show that this is our heritage in the 21st century.

Differentiation potential of mesenchymal progenitor cells following transplantation into calvarial defects.

The complexity of stem cell lineage commitment requires studies to investigate the intrinsic and extrinsic regulatory events during differentiation. The objective of this long-term in vivo study was to investigate cellular differentiation and tissue formation of transplanted undifferentiated bone-marrow-derived mesenchymal progenitor cells (BMPCs) in combination with a medical grade polycaprolactone (mPCL) scaffold and to compare them to osteoblasts; a more differentiated cell type in a calvarial defect model. Tissue formation was assessed via histology, mechanical and radiological methods after 3 12, and 24 months. After 3 months our results indicated that transplanted mesenchymal progenitor cells were influenced by the niche of the host environment. Scaffold/BMPCs formed islands of bone tissue inside the defect area. However when the surrounding host calvarium contained a high content of fatty tissue, the fat content in the defect areas was also significantly higher. In contrast, defects repaired with scaffold/cOBs did not show this phenomenon. Analysis after 12 and 24 months confirmed these observations indicating that a predominantly fatty environment leads to adipogenic development in the progenitor group. Biomechanical data revealed that the tissue was less firm in the BMPC group compared to the cOB seeded group. Evaluation of cell plasticity in vivo has important consequences in clinical cell transplantation protocols. This study indicates that cell fate decisions are partially regulated by extrinsic control mechanisms of the immediate environment suggesting that induction of BMPCs into a specific lineage could be beneficial prior transplantation.

Tuberculous extensor tenosynovitis of the hand.

Tuberculous tenosynovitis is a rare manifestation of extrapulmonary tuberculosis (Tb), especially if solely the dorsal hand compartment is affected. In this report, we present the medical history of an immuno-competent 32-year-old man presented with a painful swelling of the right dorsal wrist. Initial inflammation onset had occurred 6 months before he consulted our service, resulting in consultation of several physicians and extensive diagnostic procedures without gaining a specific diagnosis. Finally, after extensive diagnostic tests, a tenosynovectomy was performed and tuberculosis-induced extensor tenosynovitis was detected. The diagnosis was established by positive histology, repeated specific PCR and T-SPOT.TB. Tuberculous tenosynovitis can easily be overlooked as a cause of chronic tenosynovitis particularly in immunocompetent young people lacking any risk factors.

Regenerative medicine: implications for craniofacial surgery.

Craniofacial reconstruction of cases with complex anatomy challenges surgeons. The recently emerging field of tissue engineering and regenerative medicine has resulted in a variety of novel therapeutic concepts particularly in the craniofacial area. However, researchers still face significant problems when translating scientific concepts from the bench to the bedside. Reconstruction procedures depend on sustainability, aesthetic outcome, and functionality. Tissue engineering approaches yield powerful tools for long-term satisfying results enabling customized reconstruction and supporting natural healing processes. In conclusion, further advances of tissue-engineered reconstruction need multidisciplinary research to create complex tissue structures and make satisfactory outcomes clinically achievable for most patients. This review highlights clinical advances in the field and gives an overview about current scientific concepts.

Cell-based resorption assays for bone graft substitutes.

The clinical utilization of resorbable bone substitutes has been growing rapidly during the last decade, creating a rising demand for new resorbable biomaterials. An ideal resorbable bone substitute should not only function as a load-bearing material but also integrate into the local bone remodeling process. This means that these bone substitutes need to undergo controlled resorption and then be replaced by newly formed bone structures. Thus the assessment of resorbability is an important first step in predicting the in vivo clinical function of bone substitute biomaterials. Compared with in vivo assays, cell-based assays are relatively easy, reproducible, inexpensive and do not involve the suffering of animals. Moreover, the discovery of RANKL and M-CSF for osteoclastic differentiation has made the differentiation and cultivation of human osteoclasts possible and, as a result, human cell-based bone substitute resorption assays have been developed. In addition, the evolution of microscopy technology allows advanced analyses of the resorption pits on biomaterials. The aim of the current review is to give a concise update on in vitro cell-based resorption assays for analyzing bone substitute resorption. For this purpose models using different cells from different species are compared. Several popular two-dimensional and three-dimensional optical methods used for resorption assays are described. The limitations and advantages of the current ISO degradation assay in comparison with cell-based assays are discussed.

Inducible hydrogen sulfide synthesis in chondrocytes and mesenchymal progenitor cells: is H2S a novel cytoprotective mediator in the inflamed joint?

Hydrogen sulfide (H(2)S) has recently been proposed as an endogenous mediator of inflammation and is present in human synovial fluid. This study determined whether primary human articular chondrocytes (HACs) and mesenchymal progenitor cells (MPCs) could synthesize H(2)S in response to pro-inflammatory cytokines relevant to human arthropathies, and to determine the cellular responses to endogenous and pharmacological H(2)S. HACs and MPCs were exposed to IL-1ß, IL-6, TNF-α and lipopolysaccharide (LPS). The expression and enzymatic activity of the H(2)S synthesizing enzymes cystathionine-ß-synthase (CBS) and cystathionine-γ-lyase (CSE) were determined by Western blot and zinc-trap spectrophotometry, respectively. Cellular oxidative stress was induced by H(2)O(2), the peroxynitrite donor SIN-1 and 4-hydroxynonenal (4-HNE). Cell death was assessed by 3-(4,5-dimethyl-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and lactate dehydrogenase (LDH) assays. Mitochondrial membrane potential (DCm) was determined in situ by flow cytometry. Endogenous H(2) S synthesis was inhibited by siRNA-mediated knockdown of CSE and CBS and pharmacological inhibitors D,L-propargylglycine and aminoxyacetate, respectively. Exogenous H(2)S was generated using GYY4137. Under basal conditions HACs and MPCs expressed CBS and CSE and synthesized H(2)S in a CBS-dependent manner, whereas CSE expression and activity was induced by treatment of cells with IL-1ß, TNF-α, IL-6 or LPS. Oxidative stress-induced cell death was significantly inhibited by GYY4137 treatment but increased by pharmacological inhibition of H(2)S synthesis or by CBS/CSE-siRNA treatment. These data suggest CSE is an inducible source of H(2)S in cultured HACs and MPCs. H(2)S may represent a novel endogenous mechanism of cytoprotection in the inflamed joint, suggesting a potential opportunity for therapeutic intervention.

CAD/CAM-assisted breast reconstruction.

The application of computer-aided design and manufacturing (CAD/CAM) techniques in the clinic is growing slowly but steadily. The ability to build patient-specific models based on medical imaging data offers major potential. In this work we report on the feasibility of employing laser scanning with CAD/CAM techniques to aid in breast reconstruction. A patient was imaged with laser scanning, an economical and facile method for creating an accurate digital representation of the breasts and surrounding tissues. The obtained model was used to fabricate a customized mould that was employed as an intra-operative aid for the surgeon performing autologous tissue reconstruction of the breast removed due to cancer. Furthermore, a solid breast model was derived from the imaged data and digitally processed for the fabrication of customized scaffolds for breast tissue engineering. To this end, a novel generic algorithm for creating porosity within a solid model was developed, using a finite element model as intermediate.

Vascular guidance: microstructural scaffold patterning for inductive neovascularization.

Current tissue engineering techniques are limited by inadequate vascularisation and perfusion of cell-scaffold constructs. Microstructural patterning through biomimetic vascular channels within a polymer scaffold might induce neovascularization, allowing fabrication of large engineered constructs. The network of vascular channels within a frontal-parietal defect in a patient, originating from the anterior branch of the middle meningeal artery, was modeled using computer-aided design (CAD) techniques and subsequently incorporated into polycaprolactone (PCL) scaffolds fabricated using fused deposition modeling (FDM). Bone marrow-derived mesenchymal stem cells (MSCs) were seeded onto the scaffolds and implanted into a rat model, with an arteriovenous bundle inserted at the proximal extent of the vascular network. After 3 weeks, scaffolds were elevated as a prefabricated composite tissue-polymer flap and transferred using microsurgical technique. Histological examination of explanted scaffolds revealed vascular ingrowth along patterned channels, with abundant capillary and connective tissue formation throughout experimental scaffolds, while control scaffolds showed only granulation tissue. All prefabricated constructs transferred as free flaps survived and were viable. We term this concept "vascular guidance," whereby neovascularization is guided through customized channels in a scaffold. Our technique might potentially allow fabrication of much larger tissue-engineered constructs than current technologies allow, as well as allowing tailored construct fabrication with a patient-specific vessel network based on CT scan data and CAD technology.