The influence of electrolytes in the adsorption kinetics of reactive BF-5G blue dye on bone char: a mass transfer model.

The discharge of harmful dyes in water bodies is a serious pollution problem, dangerous for the ecosystem's equilibrium and human health. In this sense, the aim of this work was to determine the influence of electrolytes (NaCl, KCl, CaCl2 and MgCl2) in the adsorption of Reactive Blue BF-5G dye, the most common dye used in industrial process for fabric colouring, using bovine bone char as the adsorbent. The bovine bone char was characterized by pH of point of zero charge (pHPZC), N2 adsorption-desorption isotherms, Fourier transform-infrared spectroscopy (FT-IR) and X-ray diffractometry (XDR). The characterization revealed a mesoporous structure (pore mean diameter of 94 Šand SBET ∼107 m2 g-1) with negative charge distribution at the surface (pHPZC = 3.8). The adsorption experiments revealed that the presence of KCl enhanced the material adsorption capacity (qmax = 195 mg g-1), that the Sips isotherm best fitted the experimental data (R2 > 0.9 except for KCl solution) and the adsorption process was mono- and multilayered. The kinetic adsorption experiments indicated that the inorganic electrolytes increased the initial adsorption velocity and the data was best modelled by the surface diffusional model (SDM), implying a resistance (aqueous > CaCl2 > NaCl > MgCl2 > KCl) to mass transfer at the surface of the pores which, in turn, prevented the dye diffusion to the interior of the adsorbent (qe = 71 mg g-1). Therefore, small quantities of KCl can be used to lower the mass transfer resistance and provide higher adsorption capacity with reduced time of operation, thus increasing the overall process efficiency.

Evaluation of hybrid neutralization/biosorption process for zinc ions removal from automotive battery effluent by dolomite and fish scales.

This work focused in the evaluation of Oreochromis niloticus fish scales (FS) as biosorbent material in the removal of Zn from a synthetic effluent based on automotive battery industry effluent and, further, a hybrid neutralization/biosorption process, aiming at a high-quality treated effluent, by a cooperative use of dolomite and FS. For this, a physicochemical and morphological characterization (i.e. SEM-EDX, FTIR, XRD, and TXRF) was performed, which helped to clarify a great heterogeneity of active sites (phosphate, carbonate, amide, and hydroxyl) on the biosorbent; also the inorganic constituents (apatites) leaching from the FS was identified. Biosorption results pointed out to a pH-dependent process due to changes in the functional group's anionic character (i.e. electrostatic interactions), where an initial pH = 3 favored the Zn uptake. Kinetic and equilibrium studies confirmed the heterogeneous surface and cooperative sorption, wherein experimental data were described by Generalized Elovich kinetic model and the favorable isotherm profile by Langmuir-Freundlich isotherm ( qmax = 15.38 mg g-1 and 1/n>1 ). Speciation diagram of Zn species along with the leached species demonstrated that, for the studied pH range, the biosorption was the most likely phenomena rather than precipitation. Finally, the hybrid neutralization/biosorption process showed great potential since both the Zn concentration levels and the pH reached the legislation standards (CZn = 4 mg L-1; pH = 5). Hence, based on the characterization and biosorption results, a comprehensive evaluation of the involved mechanisms in such complex system helped to verify the prospective of FS biosorbent for the Zn treatment from solution, in both individual and hybrid processes.

Phenomenological modeling of reactive dye adsorption onto fish scales surface in the presence of electrolyte and surfactant mixtures.

The aim of this work was an experimental and theoretical investigation of the influence of electrolyte (NaCl) and surfactant (SP), as textile auxiliary agents (TAAs), onto reactive blue 5G (RB5G) dye removal by applying untreated fish scales (FS) in batch system. Kinetic and equilibrium studies were performed, aiming at the comprehension of the mass transfer mechanisms through phenomenological modeling. The biosorbent was texturally characterized, to investigate the adsorbent's characteristics and to support the models' assumptions. Hence, a 'physically meaningful' modeling to assess different systems containing dye-TAA mixtures was employed. The experimental results indicated that despite the FS nonporous characteristics, it showed remarkable adsorption capacities (≈291 mg g-1), which may be ascribed to the adsorbent-adsorbate affinity and to dye-aggregates adsorption onto the FS surface. Those results evidence a potential use of FS as an alternative biosorbent material. The mathematical model was able to identify the rate-limiting step of the process; to predict the adsorption kinetics and equilibrium condition, comprising the description of aggregates formation; and to successfully predict kinetic behavior of independent data in simulated real effluent. Those results indicate that the model can be used to simulate operating conditions and, therefore, support the design, optimization, and scale-up of adsorption processes.