Haptic Guidance on Demand: A Grip-Force Based Scheduling of Guidance Forces.

In haptic shared control systems (HSC), a fixed strength of guidance force equates to a fixed level of control authority, which can be insufficient for complex tasks. An adaptable control authority based on operator input can allow the HSC system to better assist the operator under varied conditions. In this paper, we experimentally investigate () an adaptable authority HSC system that provides the operator with a direct way to adjust the control authority based on applied grip force. This system can serve as an intuitive 'manual override' function in case of HSC system malfunction. In a position tracking task, we explore two opposite approaches to adapt the control authority: increasing versus decreasing guidance strength with operator grip. These approaches were compared with unassisted control and two levels of fixed-level haptic guidance. Results show that the grip-adaptable approach allowed the operators to increase performance over unassisted control and over a weak guidance. At the same time, the approach substantially reduced the operator physical control effort required to cope with HSC system disturbances. Predictions based on the formalized model of the complete human-in-the-loop system corresponded to the experimental results, implying that such validated formalization can be used for model-based analysis and design of guidance systems.

Time domain passivity controller for 4-channel time-delay bilateral teleoperation.

This paper presents an extension of the time-domain passivity control approach to a four-channel bilateral controller under the effects of time delays. Time-domain passivity control has been used successfully to stabilize teleoperation systems with position-force and position-position controllers; however, the performance with such control architectures is sub-optimal both with and without time delays. This work extends the network representation of the time-domain passivity controller to the four-channel architecture, which provides perfect transparency to the user without time delay. The proposed architecture is based on modelling the controllers as dependent voltage sources and using only series passivity controllers. The obtained results are shown on a one degree-of-freedom setup and illustrate the stabilization behaviour of the proposed controller when time delay is present in the communication channel.

Kinematic design to improve ergonomics in human machine interaction.

This paper introduces a novel kinematic design paradigm for ergonomic human machine interaction. Goals for optimal design are formulated generically and applied to the mechanical design of an upper-arm exoskeleton. A nine degree-of-freedom (DOF) model of the human arm kinematics is presented and used to develop, test, and optimize the kinematic structure of an human arm interfacing exoskeleton. The resulting device can interact with an unprecedented portion of the natural limb workspace, including motions in the shoulder-girdle, shoulder, elbow, and the wrist. The exoskeleton does not require alignment to the human joint axes, yet is able to actuate each DOF of our redundant limb unambiguously and without reaching into singularities. The device is comfortable to wear and does not create residual forces if misalignments exist. Implemented in a rehabilitation robot, the design features of the exoskeleton could enable longer lasting training sessions, training of fully natural tasks such as activities of daily living and shorter dress-on and dress-off times. Results from inter-subject experiments with a prototype are presented, that verify usability over the entire workspace of the human arm, including shoulder and shoulder girdle.