A Martian acoustic anemometer.

An acoustic anemometer for use on Mars has been developed. To understand the processes that control the interaction between surface and atmosphere on Mars, not only the mean winds, but also the turbulent boundary layer, the fluxes of momentum, heat and molecular constituents between surface and atmosphere must be measured. Terrestrially this is done with acoustic anemometers, but the low density atmosphere on Mars makes it challenging to adapt such an instrument for use on Mars. This has been achieved using capacitive transducers and pulse compression, and was successfully demonstrated on a stratospheric balloon (simulating the Martian environment) and in a dedicated Mars Wind Tunnel facility. This instrument achieves a measurement accuracy of ∼5 cm/s with an update rate of >20 Hz under Martian conditions.

High-resolution, air-coupled ultrasonic imaging of thin materials.

This paper describes the use of a focused air-coupled capacitance transducer combined with pulse compression techniques to form high-resolution images of thin materials in air. The focusing of the device is achieved by using an off-axis parabolic mirror. The lateral resolution of the focused transducer, operating over a bandwidth of 1.2 MHz, was found to be less than 0.5 mm. A combination of the focused transducer as a source and a planar receiver in through-transmission mode has been developed for the measurement of different features in paper products, with a lateral resolution in through-transmission imaging of approximately 0.4 mm. Images in air of thin samples such as bank notes, high-quality writing paper, stamps, and sealed joints were obtained without contact to the sample.