Unusual Stability of an end-on Superoxido Copper(II) Complex under Ambient Conditions.

Superoxido copper complexes play an important role as usually short-lived intermediates in biology and chemistry. The unusual stability of an end-on superoxido copper complex observed in an oxygen-enhanced atom transfer radical polymerization (ATRP) led to a detailed mechanistic investigation of the formation of [CuII(Me6tren)(O2•-)]+ (Me6tren = tris(2-dimethyl-aminoethyl)amine) under ambient conditions. The persistence of the superoxido copper complex could be explained by a reaction cycle including the peroxido complex [(Me6tren)2CuII2(O2)]2+ together with [CuI(Me6tren)(DMSO)]+ and [CuII(Me6tren)(OH)]+ in the overall reaction.

Photochemically Mediated Toluene Oxidation through a Copper Complex.

A method is described to photochemically oxidize toluene selectively to benzaldehyde, an essential compound in the chemical industry. Copper(I) complexes with different ligands were applied in combination with [Ru(bipy)3 ](PF6 )2 and dioxygen as the oxidant. As a result, a "dioxygen adduct" copper complex, for example, a peroxido complex, is formed as the active species. The copper(II) complex obtained after oxidation can be photochemically reduced to the starting copper(I) species, and the process can be repeated continuously. The ligand tris(2-methylpyridyl)amine (tmpa) led to the highest conversion rates.

Oxygen-Enhanced Atom Transfer Radical Polymerization through the Formation of a Copper Superoxido Complex.

In controlled radical polymerization, oxygen is typically regarded as an undesirable component resulting in terminated polymer chains, deactivated catalysts, and subsequent cessation of the polymerization. Here, we report an unusual atom transfer radical polymerization whereby oxygen favors the polymerization by triggering the in situ transformation of CuBr/L to reactive superoxido species at room temperature. Through a superoxido ARGET-ATRP mechanism, an order of magnitude faster polymerization rate and a rapid and complete initiator consumption can be achieved as opposed to when unoxidized CuBr/L was instead employed. Very high end-group fidelity has been demonstrated by mass-spectrometry and one-pot synthesis of block and multiblock copolymers while pushing the reactions to reach near-quantitative conversions in all steps. A high molecular weight polymer could also be targeted (DPn = 6400) without compromising the control over the molar mass distributions (D < 1.20), even at an extremely low copper concentration (4.5 ppm). The versatility of the technique was demonstrated by the polymerization of various monomers in a controlled fashion. Notably, the efficiency of our methodology is unaffected by the purity of the starting CuBr, and even a brown highly-oxidized 15-year-old CuBr reagent enabled a rapid and controlled polymerization with a final dispersity of 1.07, thus not only reducing associated costs but also omitting the need for rigorous catalyst purification prior to polymerization.

Syntheses and investigation of metal complexes with macrocyclic polythioether ligands.

Copper(I) complexes with the macrocyclic thioether ligands 1,4,8,11-tetrathiacyclotetradecane (tetrathiacyclam, 14-S4) and 1,8-dithia-4,11-diazacyclotetradecane (dithiacyclam, 14-N2S2) were synthesised and structurally characterised. While the copper(I) complexes showed no reactivity towards dioxygen, the formation of "dioxygen adduct complexes" could be spectroscopically detected with ozone using low temperature stopped-flow techniques. Furthermore, it was possible to synthesise and characterise iron(II) and cobalt(II) complexes with the tetrathiacyclam ligand. No "dioxygen adduct" intermediates were observed when these complexes were reacted with dioxygen or ozone. Depending on the reaction conditions, the coordination of the metal ions could be controlled (endo- vs. exo-coordination and cis- vs. trans-coordination) and in addition to mononuclear complexes, also coordination polymers were obtained.

Characterization of copper complexes with derivatives of the ligand (2-aminoethyl)bis(2-pyridylmethyl)amine (uns-penp) and their reactivity towards oxygen.

A series of copper(I) complexes with ligands derived from the tripodal ligand (2-aminoethyl)bis(2-pyridylmethyl)amine (uns-penp) have been structurally characterized and their redox chemistry analyzed by cyclic voltammetry. While the redox potentials of most of the complexes were similar their reactivity towards dioxygen was quite different. While the complex with a ferrocene derived ligand of uns-penp reacted in solution at low temperatures in a two-step reaction from the preliminary formed mononuclear end-on superoxido complex to a quite stable dinuclear peroxido complex it did not react with dioxygen in the solid state. Other complexes also did not react with dioxygen in the solid state while some showed a reversible formation to a green compound, indicating formation of an end-on superoxido complex that unfortunately so far could not be characterized. In contrast, copper complexes with the Me2uns-penp and Et-iProp-uns-penp formed dinuclear peroxido complexes in a solid-state reaction. While the reaction of dioxygen with the [Cu(Me2uns-penp]BPh4 was quite slow an instant reaction took place for [Cu(Et-iProp-uns-penp]BPh. Very unusual, it turned out that crystals of the copper(I) complex that could be structurally characterized still were crystalline when reacted with dioxygen. Therefore, it was possible to solve the structure of the corresponding dinuclear peroxido complex directly from the same batch of crystals. The crystalline structures of the copper(I) and copper(II) complex revealed that the reason for this is the fact, that the copper(I) complex is kind of preorganized for the uptake of dioxygen and does not really change in its overall structure when being oxidized.

Synthesis and structure of a complex of copper(I) with l-cysteine and chloride ions containing Cu12S6 nanoclusters.

The title hydrated copper(I)-l-cysteine-chloride complex has a polymeric structure of composition {[Cu16(CysH2)6Cl16]·xH2O} n [CysH2 = HO2CCH(NH3 +)CH2S- or C3H7NO2S], namely, poly[[tetra-µ3-chlorido-deca-µ2-chlorido-di-chlorido-hexa-kis-(µ4-l-cysteinato)hexa-deca-copper] polyhydrate]. The copper atoms are linked by thiol-ate groups to form Cu12S6 nanoclusters that take the form of a tetra-kis cubocta-hedron, made up of a Cu12 cubo-octa-hedral subunit that is augmented by six sulfur atoms that are located symmetrically atop of each of the Cu4 square units of the Cu12 cubo-octa-hedron. The six S atoms thus form an octa-hedral subunit themselves. The exterior of the Cu12S6 sphere is decorated by chloride ions and trichlorocuprate units. Three chloride ions are coordinated in an irregular fashion to trigonal Cu3 subunits of the nanocluster, and four trigonal CuCl3 units are bonded via each of their chloride ions to a copper ion on the Cu12S6 sphere. The trigonal CuCl3 units are linked via Cu2Cl2 bridges covalently connected to equivalent units in neighboring nanoclusters. Four such connections are arranged in a tetra-hedral fashion, thus creating an infinite diamond-like net of Cu12S6Cl4(CuCl3)4 nanoclusters. The network thus formed results in large channels occupied by solvent mol-ecules that are mostly too ill-defined to model. The content of the voids, believed to be water mol-ecules, was accounted for via reverse Fourier-transform methods using the SQUEEZE algorithm [Spek (2015 ▸). Acta Cryst. C71, 9-18]. The protonated amino groups of the cysteine ligands are directed away from the sphere, forming N-H⋯Cl hydrogen bonds with chloride-ion acceptors of their cluster. The protonated carb-oxy groups point outwards and presumably form O-H⋯O hydrogen bonds with the unresolved water mol-ecules of the solvent channels. Disorder is observed in one of the two crystallographically unique [Cu16(CysH2)6Cl16] segments for three of the six cysteine anions.

A Thioether-Ligated Cupric Superoxide Model with Hydrogen Atom Abstraction Reactivity.

The central role of cupric superoxide intermediates proposed in hormone and neurotransmitter biosynthesis by noncoupled binuclear copper monooxygenases like dopamine-ß-monooxygenase has drawn significant attention to the unusual methionine ligation of the CuM ("CuB") active site characteristic of this class of enzymes. The copper-sulfur interaction has proven critical for turnover, raising still-unresolved questions concerning Nature's selection of an oxidizable Met residue to facilitate C-H oxygenation. We describe herein a model for CuM, [(TMGN3S)CuI]+ ([1]+), and its O2-bound analog [(TMGN3S)CuII(O2•-)]+ ([1·O2]+). The latter is the first reported cupric superoxide with an experimentally proven Cu-S bond which also possesses demonstrated hydrogen atom abstraction (HAA) reactivity. Introduction of O2 to a precooled solution of the cuprous precursor [1]B(C6F5)4 (-135 °C, 2-methyltetrahydrofuran (2-MeTHF)) reversibly forms [1·O2]B(C6F5)4 (UV/vis spectroscopy: λmax 442, 642, 742 nm). Resonance Raman studies (413 nm) using 16O2 [18O2] corroborated the identity of [1·O2]+ by revealing Cu-O (446 [425] cm-1) and O-O (1105 [1042] cm-1) stretches, and extended X-ray absorption fine structure (EXAFS) spectroscopy showed a Cu-S interatomic distance of 2.55 Å. HAA reactivity between [1·O2]+ and TEMPO-H proceeds rapidly (1.28 × 10-1 M-1 s-1, -135 °C, 2-MeTHF) with a primary kinetic isotope effect of kH/kD = 5.4. Comparisons of the O2-binding behavior and redox activity of [1]+ vs [2]+, the latter a close analog of [1]+ but with all N atom ligation (i.e., N3S vs N4), are presented.

Kinetic studies on the reaction of NO with iron(ii) complexes using low temperature stopped-flow techniques.

Low temperature stopped-flow techniques were used to investigate the reaction of three different iron(ii) complexes with nitrogen monoxide. The kinetic studies allowed calculation of the activation parameters from the corresponding Eyring plots for all three systems. The reaction of iron(ii) chloride with NO leading to the formation of MNIC (mononitrosyl-iron-complex) and DNIC (dinitrosyl-iron-complex) led to activation parameters of ΔH‡ = 55.4 ± 0.4 kJ mol-1 and ΔS‡ = 13 ± 2 J K-1 mol-1 for MNIC and ΔH‡ = 32 ± 6 kJ mol-1 and ΔS‡ = -193 ± 21 J K-1 mol-1 for DNIC. Formation of MNIC turned out to be much faster in comparison with DNIC. In contrast, activation parameters for the formation of monoculear [Fe(bztpen)(NO)](OTf)2 (bztpen = N-benzyl-N,N',N'-tris(2-pyridylmethyl)-ethylenediamine) ΔH‡ = 17.8 ± 0.8 kJ mol-1 and ΔS‡ = -181 ± 3 J K-1 mol-1 supported an associative mechanism. Interestingly, [Fe(bztpen)(CH3CN)](OTf)2 does not react with dioxygen at all. Furthermore, activation parameters of ΔH‡ = 37.7 ± 0.7 kJ mol-1 and ΔS‡ = -66 ± 3 J K-1 mol-1 were obtained for the reaction of NO with the dinuclear iron(ii) H-HPTB complex (H-HPTB = N,N,N',N'-tetrakis(2-benzimidazolylmethyl)-2-hydroxy-1,3-diaminopropane), [Fe2(H-HPTB)(Cl)3]. The kinetic data allowed postulation of the mechanisms for all of these reactions.

Aerobic Aliphatic Hydroxylation Reactions by Copper Complexes: A Simple Clip-and-Cleave Concept.

A simple imine clip-and-cleave concept has been developed for the selective hydroxylation of non-activated CH bonds in aliphatic aldehydes with dioxygen through a copper complex. The synthetic protocol involves reaction of a substrate aldehyde with N,N-diethyl-ethylendiamine to give the corresponding imine, which is used as a bidentate donor ligand forming a copper(I) complex with [Cu(CH3 CN)4 ][CF3 SO3 ]. After exposure of the reaction mixture to dioxygen acidic cleavage and aqueous workup liberates the corresponding ß-hydroxylated aldehyde. The concept for the hydroxylation of trimethylacetaldehyde as well as adamantane and diamantane 1-carbaldehydes was investigated and the corresponding ß-hydroxy aldehydes were obtained with high selectivities. The results of low temperature stopped-flow measurements indicate the formation of a bis(µ-oxido)dicopper complex as reactive intermediate. According to density functional theory (DFT, RI-BLYP-D3/def2-TZVP(SDD)/ COSMO(CH2 Cl2 )//RI-PBE-D3/def2-TZVP(SDD)) computations CH bonds suitably predisposed to the [Cu2 O2 ]2+ core undergo hydroxylation in a concerted step with particularly low activation barriers, which explains the experimentally observed regioselectivities.

Synthesis of an Iron(IV) Aqua-Oxido Complex Using Ozone as an Oxidant.

The iron(IV) oxido complex [(tmc)Fe=O(OTf)]OTf with the macrocyclic ligand 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclo-tetradecane (tmc) has been synthesized using ozone as an oxidant. By adding water to this compound the complex [(H2 O)(tmc)Fe=O)](OTf)2 could be prepared. This complex is important in regard to a better understanding of the reactivity of FeIV oxido complexes. Mössbauer measurements using the solid compound showed an isomer shift of δ=0.19 mm s-1 and a quadrupole splitting ΔEQ =1.38 mm s-1 , confirming the high-valent FeIV state. DFT calculations were performed and led to an assignment of triplet spin multiplicity. Crystallographic characterization of [(H2 O)(tmc)Fe=O)](OTf)2 as well as of starting materials [(tmc)Fe(CH3 CN)](OTf)2 and [(tmc)Fe(OTf)]OTf together with previous results strongly suggest that [(H2 O)(tmc)Fe=O)](OTf)2 was formed similar to the oxido-hydroxido tautomerism analogous to heme systems.

Anticancer activity of a series of copper(II) complexes with tripodal ligands.

A series of copper(II) complexes with tripodal polypyridylamine ligands (derived from the parent ligand tris(2-pyridylmethyl)amine, tmpa) has been synthesized. Crystallographic characterization was possible for all complexes obtained. The copper(II) chloride complexes were investigated for their in vitro anticancer potential using human tumor cell lines containing examples of cervical, colon, ovarian cancers and melanoma. Some compounds showed a similar activity compared to that of cisplatin, however no systematic behavior could be observed.

Copper Chloride Catalysis: Do µ4-Oxido Copper Clusters Play a Significant Role?

Copper chloride catalysis is a well-established field in organic and inorganic chemistry. However, in most cases a detailed mechanistic understanding of the individual reaction steps and identification of reactive intermediates are still missing. The present study reports the results of spectroscopic and spectrometric measurements that support formation of copper agglomerates during catalytic processes. The composition of CuCl2·2H2O in several coordinating solvents and the influence of basic coreagents such as NaO(t)Bu and K2CO3 on the structure in the solid state as well as in solution were investigated. Several experiments involving crystal structure determination, IR spectroscopy, and ultra-high-resolution cryospray-ionization mass spectrometry were performed. The crystal structures of [CuCl2(H2O)]·0.5(CH3)2CO (1), [Cu2(CH3CN)2Cl4] (2), [Cu3(CH3CN)3Cl6] (3), [Cu3Cl6(THF)4] (4), [Cu(DMSO)2Cl2] (5), (H2N(CH3)2)2[CuCl3] (6), and [Cu4OCl6(THF)(urea)3]·3THF·urea (8) are reported herein. It can be clearly demonstrated that µ4-oxido copper clusters of the formula [Cu4OCl6(solvent)4] are the main product from the reactions of CuCl2·2H2O and basic coreagents. As a final result of these experiments, it can be stated that µ4-oxido copper clusters most likely play an important role in the mechanism of copper chloride-catalyzed reactions.

Selective Aromatic Hydroxylation with Dioxygen and Simple Copper Imine Complexes.

The formation of a bis(µ-oxido)dicopper complex with the ligand 2-(diethylaminoethyl)-6-phenylpyridine (PPN) and its subsequent hydroxylation of the pendant phenyl group (studied earlier by Holland et al., Angew. Chem. Int. Ed.- 1999, 38, 1139-1142) has been reinvestigated to gain a better understanding of such systems in view of the development of new synthetic applications. To this end, we prepared a simple copper imine complex system that also affords selective o-hydroxylation of aromatic aldehydes by using dioxygen as the oxidant: Applying the ligand N'-benzylidene-N,N-diethylethylenediamine (BDED), salicylaldehyde was prepared in good yields and we show that this reaction also occurs through an intermediate bis-µ-oxido copper complex. The underlying reaction mechanism for the PPN-supported complex was studied at the BLYP-D/TZVP level of density functional theory and the results for representative stationary points along reaction paths of the BDED-supported complex reveal a closely related mechanistic scenario. The results demonstrate a new facile synthetic way to introduce OH groups into aromatic aldehydes.

Synthesis and characterisation of cobalt, nickel and copper complexes with tripodal 4N ligands as novel catalysts for the homogeneous partial oxidation of alkanes.

Four new compounds of the general formula [M(L)(CH3COO)][PF6], where L is a tetradentate tripodal ligand such as tris[2-(dimethylamino)ethyl]amine (L1) or (2-aminoethyl)bis(2-pyridylmethyl)amine (L2) and M is Co(II), Ni(II) or Cu(II), have been prepared employing a simple two-step synthesis. The compounds have been characterised by elemental analysis, mass spectroscopy, IR spectroscopy and X-ray diffraction. The catalytic properties of the derivatives containing the aliphatic ligand L1 have been investigated in particular toward the oxidation of cyclohexane and adamantane in the presence of the sacrificial oxidant m-CPBA (meta-chloroperbenzoic acid). Good TONs and selectivity have been determined for the cobalt and nickel compounds.

Reactions of copper(II) chloride in solution: facile formation of tetranuclear copper clusters and other complexes that are relevant in catalytic redox processes.

Mixing CuCl2⋅2 H2O with benzylamine in alcoholic solutions led to an extremely colorful chemistry caused by the formation of a large number of different complexes. Many of these different species could be structurally characterized. These include relatively simple compounds such as [Cu(L(1))4Cl2] (L(1) = benzylamine) and (HL(1))2[CuCl4]. Most interestingly is the easy formation of two cluster complexes, one based on two cluster units Cu4OCl6(L(1))4 connected through one [Cu(L(1))2Cl2] complex and one based on a cubane-type cluster ([Cu4O4](C11H14)4Cl4). Both clusters proved to be highly reactive in a series of oxidation reactions of organic substrates by using air or peroxides as oxidants. Furthermore, it was possible to isolate and structurally characterize ([Cu(L(1))Cl]3 and [Cu(benz2mpa)2]CuCl2 (benz2mpa = benzyl-(2-benzylimino-1-methyl-propylidene)-amine), two copper(I) complexes that formed in solution, demonstrating the high redox activity of the cluster systems. In addition, it was possible to solve the molecular structures of the compounds Cu4OCl6(MeOH)4, [Cu(MeOH)2Cl2], [Cu(aniline)2Cl2], and an organic side product (HC13 H19 NOCl). In fact all determined structures are of a known type but the chemical relation between these compounds could be explained for the first time. The paper describes these different compounds and their chemical equilibria. Some of these complexes seem to be relevant in catalytic oxidation reactions and their reactivity is discussed in more detail.

Syntheses, characterization, and magnetic studies of copper(II) complexes with the ligand N,N,N',N'-tetrakis(2-pyridylmethyl)-1,3-benzenediamine (1,3-tpbd) and its phenol derivative 2,6-bis[bis(2-pyridylmethyl)amino]-p-cresol] (2,6-Htpcd).

The copper(II) complexes [Cu(4)(1,3-tpbd)(2)(H(2)O)(4)(NO(3))(4)](n)(NO(3))(4n)·13nH(2)O (1), [Cu(4)(1,3-tpbd)(2)(AsO(4))(ClO(4))(3)(H(2)O)](ClO(4))(2)·2H(2)O·0.5CH(3)OH (2), [Cu(4)(1,3-tpbd)(2)(PO(4))(ClO(4))(3)(H(2)O)](ClO(4))(2)·2H(2)O·0.5CH(3)OH (3), [Cu(2)(1,3-tpbd){(PhO)(2)PO(2)}(2)](2)(ClO(4))(4) (4), and [Cu(2)(1,3-tpbd){(PhO)PO(3)}(2)(H(2)O)(0.69)(CH(3)CN)(0.31)](2)(BPh(4))(4)·Et(2)O·CH(3)CN (5) [1,3-tpbd = N,N,N',N'-tetrakis(2-pyridylmethyl)-1,3-benzenediamine, BPh(4)(-) = tetraphenylborate] were prepared and structurally characterized. Analyses of the magnetic data of 2, 3, 4, and [Cu(2)(2,6-tpcd)(H(2)O)Cl](ClO(4))(2) (6) [2,6-tpcd = 2,6-bis[bis(2-pyridylmethyl)amino]-p-cresolate] show the occurrence of weak antiferromagnetic interactions between the copper(II) ions, the bis-terdentate 1,3-tpbd/2,6-tpcd, µ(4)-XO(4) (X = As and P) µ(1,2)-OPO and µ-O(phenolate) appearing as poor mediators of exchange interactions in this series of compounds. Simple orbital symmetry considerations based on the structural knowledge account for the small magnitude of the magnetic couplings found in these copper(II) compounds.

Ligand influence over the formation of dinuclear [2+2] versus trinuclear [3+3] Cu(I) Schiff base macrocyclic complexes.

The preparation and characterization of three new macrocyclic ligands with pendant arms based on the [2+2] condensation of isophthalaldehyde and the corresponding triamine substituted at the central N-atom is reported. None of these new macrocyclic ligands undergo any equilibrium reaction, based on imine hydrolysis to generate [1+1] macrocyclic formation or higher oligomeric compounds, such as [3+3], [4+4], etc., at least within the time scale of days. This indicates the stability of the newly generated imine bond. In sharp contrast, the reaction of the [2+2] macrocyclic Schiff bases with Cu(I) generates the corresponding dinuclear Cu(I) complexes [Cu(2)(L(1))](2+), 1(2+); [Cu(2)(L(2))(CH(3)CN)(2)](2+), 2(2+); and [Cu(2)(L(3))(CH(3)CN)(2)](2+), 3(2+), together with their trinuclear Cu(I) homologues [Cu(3)(L(4))](3+), 4(3+); [Cu(3)(L(5))(CH(3)CN)(3)](3+), 5(3+); and [Cu(3)(L(6))(CH(3)CN)(3)](3+), 6(3+), where the [2+2] ligand has undergone an expansion to the corresponding [3+3] Schiff base that is denoted as L(4), L(5), or L(6). The conditions under which the dinuclear and trinuclear complexes are formed were analyzed in terms of solvent dependence and synthetic pathways. The new complexes are characterized in solution by NMR, UV-vis, and MS spectroscopy and in the solid state by X-ray diffraction analysis and IR spectroscopy. For the particular case of the L(2) ligand, MS spectroscopy is also used to monitor the metal assisted transformation where the dinuclear complex 2(2+) is transformed into the trinuclear complex 5(3+). The Cu(I) complexes described here, in general, react slowly (within the time scale of days) with molecular oxygen, except for the ones containing the phenolic ligands 2(2+) and 5(3+) that react a bit faster.