Easy Synthetic Access to High-Melting Sulfurated Copolymers and their Self-Assembling Diblock Copolymers from Phenylisothiocyanate and Oxetane.

Although sulfurated polymers promise unique properties, their controlled synthesis, particularly when it comes to complex and functional architectures, remains challenging. Here, we show that the copolymerization of oxetane and phenyl isothiocyanate selectively yields polythioimidocarbonates as a new class of sulfur containing polymers, with narrow molecular weight distributions (Mn=5-80 kg/mol with D≤1.2; Mn,max=124 kg/mol) and high melting points of up to 181 °C. The method tolerates different substituent patterns on both the oxetane and the isothiocyanate. Self-nucleation experiments reveal that π-stacking of phenyl substituents, the presence of unsubstituted polymer backbones, and the kinetically controlled linkage selectivity are key factors in maximising melting points. The increased tolerance to macro-chain transfer agents and the controlled propagation allows the synthesis of double crystalline and amphiphilic diblock copolymers, which can be assembled into micellar- and worm-like structures with amorphous cores in water. In contrast, crystallization driven self-assembly in ethanol gives cylindrical micelles or platelets.

A Closed-Loop Recyclable Low-Density Polyethylene.

Low-density polyethylene (LDPE) is one of the most important plastics, which is produced unfortunately under extreme conditions. In addition, it consists of robust aliphatic C─C bonds which are challenging to cleave for plastic recycling. A low-pressure and -temperature (pethylene = 2 bara, T = 70 °C) macromonomer-based synthesis of long chain branched polyethylene is reported. The introduction of recycle points permits the polymerization (grafting to) of the macromonomers to form the long chain branched polyethylene and its depolymerization (branch cleavage). Coordinative chain transfer polymerization employing ethylene and co-monomers is used for the synthesis of the macromonomers, permitting a high flexibility of their precise structure and efficient synthesis. The long chain branched polyethylene material matches key properties of low-density polyethylene.

Surface-Compartmentalized Micelles by Stereocomplex-Driven Self-Assembly.

The unique corona structure of surface-compartmentalized micelles (Janus micelles, patchy micelles) opens highly relevant applications, e.g. as efficient particulate surfactants for emulsion stabilization or compatibilization of polymer blends. Here, stereocomplex-driven self-assembly (SCDSA) as a facile route to micelles with a semicrystalline stereocomplex (SC) core and a patch-like microphase separated corona, employing diblock copolymers with enantiomeric poly(L-lactide)/poly(D-lactide) blocks and highly incompatible corona-forming blocks (polystyrene (PS), poly(tert-butyl methacrylate)) is introduced. The spherical patchy SC micelles feature a narrow size distribution and show a compartmentalized, shamrock-like corona structure. Compared to SC micelles with a homogeneous PS corona the patchy micelles have a significantly higher interfacial activity attributable to the synergistic combination of an amphiphilic corona with the Pickering effect of nanoparticles. The patchy micelles are successfully employed in the stabilization of emulsions, underlining their application potential.

Functional Mesostructured Electrospun Polymer Nonwovens with Supramolecular Nanofibers.

Functional, hierarchically mesostructured nonwovens are of fundamental importance because complex fiber morphologies increase the active surface area and functionality allowing for the effective immobilization of metal nanoparticles. Such complex functional fiber morphologies clearly widen the property profile and enable the preparation of more efficient and selective filter media. Here, the realization of hierarchically mesostructured nonwovens with barbed wire-like morphology is demonstrated by combining electrospun polystyrene fibers, decorated with patchy worm-like micelles, with solution-processed supramolecular short fibers composed of 1,3,5-benzenetricarboxamides with peripheral N,N-diisopropylaminoethyl substituents. The worm-like micelles with a patchy microphase-separated corona are prepared by crystallization-driven self-assembly of a polyethylene based triblock terpolymer and deposited on top of the polystyrene fibers by coaxial electrospinning. The micelles are designed in a way that their patches promote the directed self-assembly of the 1,3,5-benzenetricarboxamide and the fixation of the supramolecular nanofibers on the supporting polystyrene fibers. Functionality of the mesostructured nonwoven is provided by the peripheral N,N-diisopropylaminoethyl substituents of the 1,3,5-benzenetricarboxamide and proven by the effective immobilization of individual palladium nanoparticles on the supramolecular nanofibers. The preparation of hierarchically mesostructured nonwovens and their shown functionality demonstrate that such systems are attractive candidates to be used for example in filtration, selective separation and heterogenous catalysis.

Self-Assembled Fluorescent Block Copolymer Micelles with Responsive Emission.

Responsive fluorescent materials offer a high potential for sensing and (bio-)imaging applications. To investigate new concepts for such materials and to broaden their applicability, the previously reported non-fluorescent zinc(II) complex [Zn(L)] that shows coordination-induced turn-on emission was encapsulated into a family of non-fluorescent polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) diblock copolymer micelles leading to brightly emissive materials. Coordination-induced turn-on emission upon incorporation and ligation of the [Zn(L)] in the P4VP core outperform parent [Zn(L)] in pyridine solution with respect to lifetimes, quantum yields, and temperature resistance. The quantum yield can be easily tuned by tailoring the selectivity of the employed solvent or solvent mixture and, thus, the tendency of the PS-b-P4VP diblock copolymers to self-assemble into micelles. A medium-dependent off-on sensor upon micelle formation could be established by suppression of non-micelle-borne emission background pertinent to chloroform through controlled acidification indicating an additional pH-dependent process.

Realizing shape and size control for the synthesis of coordination polymer nanoparticles templated by diblock copolymer micelles.

The combination of polymers with nanoparticles offers the possibility to obtain customizable composite materials with additional properties such as sensing or bistability provided by a switchable spin crossover (SCO) core. For all applications, a precise control over size and shape of the nanomaterial is highly important as it will significantly influence its final properties. By confined synthesis of iron(II) SCO coordination polymers within the P4VP cores of polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) micelles in THF we are able to control the size and also the shape of the resulting SCO nanocomposite particles by the composition of the PS-b-P4VP diblock copolymers (dBCPs) and the amount of complex employed. For the nanocomposite samples with the highest P4VP content, a morphological transition from spherical nanoparticles to worm-like structures was observed with increasing coordination polymer content, which can be explained with the impact of complex coordination on the self-assembly of the dBCP. Furthermore, the SCO nanocomposites showed transition temperatures of T1/2 = 217 K, up to 27 K wide hysteresis loops and a decrease of the residual high-spin fraction down to γHS = 14% in the worm-like structures, as determined by magnetic susceptibility measurements and Mössbauer spectroscopy. Thus, SCO properties close or even better (hysteresis) to those of the bulk material can be obtained and furthermore tuned through size and shape control realized by tailoring the block length ratio of the PS-b-P4VP dBCPs.

Block Copolymers with Crystallizable Blocks: Synthesis, Self-Assembly and Applications.

Block copolymers with crystallizable blocks are a highly interesting class of materials owing to their unique self-assembly behaviour both in bulk and solution. This Special Issue brings together new developments in the synthesis and self-assembly of semicrystalline block copolymers and also addresses potential applications of these exciting materials.

Morphology and Degradation of Multicompartment Microparticles Based on Semi-Crystalline Polystyrene-block-Polybutadiene-block-Poly(L-lactide) Triblock Terpolymers.

The confinement assembly of block copolymers shows great potential regarding the formation of functional microparticles with compartmentalized structure. Although a large variety of block chemistries have already been used, less is known about microdomain degradation, which could lead to mesoporous microparticles with particularly complex morphologies for ABC triblock terpolymers. Here, we report on the formation of triblock terpolymer-based, multicompartment microparticles (MMs) and the selective degradation of domains into mesoporous microparticles. A series of polystyrene-block-polybutadiene-block-poly(L-lactide) (PS-b-PB-b-PLLA, SBL) triblock terpolymers was synthesized by a combination of anionic vinyl and ring-opening polymerization, which were transformed into microparticles through evaporation-induced confinement assembly. Despite different block compositions and the presence of a crystallizable PLLA block, we mainly identified hexagonally packed cylinders with a PLLA core and PB shell embedded in a PS matrix. Emulsions were prepared with Shirasu Porous Glass (SPG) membranes leading to a narrow size distribution of the microparticles and control of the average particle diameter, d ≈ 0.4 µm-1.8 µm. The core-shell cylinders lie parallel to the surface for particle diameters d < 0.5 µm and progressively more perpendicular for larger particles d > 0.8 µm as verified with scanning and transmission electron microscopy and particle cross-sections. Finally, the selective degradation of the PLLA cylinders under basic conditions resulted in mesoporous microparticles with a pronounced surface roughness.

Janus Micelles by Crystallization-Driven Self-Assembly of an Amphiphilic, Double-Crystalline Triblock Terpolymer.

Surface-compartmentalized micellar nanostructures (Janus and patchy micelles) have gained increasing interest due to their unique properties opening highly relevant applications, e.g., as efficient particulate surfactants, compatibilizers in polymer blends, or templates for catalytically active nanoparticles. We present a facile method for the production of worm-like Janus micelles based on crystallization-driven self-assembly of a double-crystalline triblock terpolymer with a crystallizable polyethylene middle block and two highly incompatible corona blocks, polystyrene and poly(ethylene oxide). This approach enables the production of amphiphilic Janus micelles with excellent interfacial activity by a comparably simple heating and cooling protocol directly in solution.

Patchy Micelles with a Crystalline Core: Self-Assembly Concepts, Properties, and Applications.

Crystallization-driven self-assembly (CDSA) of block copolymers bearing one crystallizable block has emerged to be a powerful and highly relevant method for the production of one- and two-dimensional micellar assemblies with controlled length, shape, and corona chemistries. This gives access to a multitude of potential applications, from hierarchical self-assembly to complex superstructures, catalysis, sensing, nanomedicine, nanoelectronics, and surface functionalization. Related to these applications, patchy crystalline-core micelles, with their unique, nanometer-sized, alternating corona segmentation, are highly interesting, as this feature provides striking advantages concerning interfacial activity, functionalization, and confinement effects. Hence, this review aims to provide an overview of the current state of the art with respect to self-assembly concepts, properties, and applications of patchy micelles with crystalline cores formed by CDSA. We have also included a more general discussion on the CDSA process and highlight block-type co-micelles as a special type of patchy micelle, due to similarities of the corona structure if the size of the blocks is well below 100 nm.

Hierarchical Superstructures by Combining Crystallization-Driven and Molecular Self-Assembly.

Combining the unique corona structure of worm-like patchy micelles immobilized on a polymer fiber with the molecular self-assembly of 1,3,5-benzenetricarboxamides (BTAs) leads to hierarchical superstructures with a fir-tree-like morphology. For this purpose, worm-like patchy micelles bearing pendant, functional tertiary amino groups in one of the corona patches were prepared by crystallization-driven self-assembly and immobilized on a supporting polystyrene fiber by coaxial electrospinning. The obtained patchy fibers were then immersed in an aqueous solution of a tertiary amino-functionalized BTA to induce patch-mediated molecular self-assembly to well-defined fir-tree-like superstructures upon solvent evaporation. Interestingly, defined superstructures are obtained only if the pendant functional groups in the surface patches match with the peripheral substituents of the BTA, which is attributed to a local increase in BTA concentration at the polymer fibers' surface.

Terrestrial solar radiation driven photodecomposition of ciprofloxacin in clinical wastewater applying mesostructured iron(III) oxide.

Cationic cylindrical polymer brushes based on polybutadiene-block-poly(2-vinylpyridine) were applied as structure-directing agent for mesostructuring Fe2O3 nanoparticles into nanotubes. After temperature-controlled template removal, the obtained non-woven catalysts were tested for the photodegradation of ciprofloxacin under terrestrial solar radiation. At a slightly basic pH value, as typically encountered in clinical wastewaters, the mesostructured Fe2O3 shows a 4.5 times faster degradation of ciprofloxacin than commercial Aeroxide® TiO2 P25. Even wide-bandgap ZnO, mesostructured in the same way, is 1.6 times slower. Moreover, the non-woven-like structure of the catalyst allows for easy recovery of the catalyst and operation in a continuous flow reactor. Graphical abstract.

Frustrated Microparticle Morphologies of a Semicrystalline Triblock Terpolymer in 3D Soft Confinement.

Self-assembly of block copolymers (BCPs) in three-dimensional (3D) confinement of emulsion droplets has emerged as a versatile route for the formation of functional micro- and nanoparticles. While the self-assembly of amorphous coil-coil BCPs is fairly well documented, less is known about the behavior of crystalline-coil BCPs. Here, we demonstrate that confining a linear ABC triblock terpolymer with a crystallizable middle block in oil-in-water (O/W) emulsions results in a range of microparticles with frustrated inner structure originating from the conflict between crystallization and curved interfaces. Polystyrene-block-polyethylene-block-poly(methyl methacrylate) (PS-b-PE-b-PMMA, S32E36M3293) in toluene droplets was subjected to different preparation protocols. If evaporation was performed well above the bulk crystallization temperature of the PE block (Tevap > Tc), S32E36M3293 first microphase-separated into microparticles with lamella morphology followed by crystallization into a variety of frustrated morphologies (e.g., bud-like, double staircase, spherocone). By evaporating at significantly lower temperatures that allow the PE block to crystallize from solution (Tevap < Tc), S32E36M3293 underwent crystallization-driven self-assembly into patchy crystalline-core micelles, followed by confinement assembly into lenticular microparticles with compartmentalized hexagonal cylinder lattices. The frequency of these frustrated morphologies depends on polymer concentration and the evaporation protocol. These results provide a preliminary understanding of the morphological behavior of semicrystalline block copolymers in 3D soft confinement and may provide alternative routes to structure multicompartment microparticles from a broader range of polymer properties.

"Dumb" pH-Independent and Biocompatible Hydrogels Formed by Copolymers of Long-Chain Alkyl Glycidyl Ethers and Ethylene Oxide.

The formation and rheological properties of hydrogels based on amphiphilic ABA triblock polyether copolymers are described, relying solely on the hydrophobic interaction of long-chain alkyl glycidyl ether (AlkGE)- based A-blocks that are combined with a hydrophilic poly(ethylene glycol) (PEG) midblock. Via anionic ring-opening copolymerization (AROP), ethylene oxide (EO) and long-chain alkyl glycidyl ethers (AlkGEs) were copolymerized, using deprotonated poly(ethylene glycol) (PEG) macroinitiators (Mn of 10, 20 kg mol-1). The polymerization afforded amphiphilic ABA triblock copolymers with molar masses in the range of 21-32 kg mol-1 and dispersities (D) of D = 1.07-1.17. Kinetic studies revealed random copolymerization of EO and AlkGE, indicating random spacing of the hydrophobic AlkGE units by polar EO units. Following this approach, the hydrophobicity of the apolar blocks of amphiphilic ABA triblock polyethers can be tailored. Detailed rheological measurements confirmed the successful formation of hydrogels at different pH values as a consequence of nonpolar interactions and alkyl chain crystallization. Hydrogel formation was also observed at different ionic strengths (i.e., varied salt concentration), based on the hydrophobic aggregates. This behavior is in contrast to other often-used supramolecular cross-linking strategies, such as Coulomb interactions, complexation, or hydrogen bonding. Micro-differential scanning calorimetry (µ-DSC) measurements of the hydrogels revealed crystalline hydrophobic domains with melting temperatures in the physiological temperature range. In 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazoliumbromide (MTT) assays, diblock copolymers possessing structural analogy to the triblock copolymers were studied to assess the general cytotoxicity of amphiphilic polyethers bearing long alkyl chains at the polyether backbone, using splenic immune cells. At intermediate polymer concentrations, no cytotoxic effects were observed. This indicates that long-chain alkyl glycidyl ethers are promising for the introduction of highly hydrophobic as well as crystalline motifs at the polyether backbone in hydrogels for biomedical purposes.

Converting Poly(Methyl Methacrylate) into a Triple-Responsive Polymer.

Multiresponsive polymers that can respond to several external stimuli are promising materials for a manifold of applications. Herein, a facile method for the synthesis of triple-responsive (pH, temperature, CO2 ) poly(N,N-diethylaminoethyl methacrylamide) by a post-polymerization amidation of poly(methyl methacrylate) (PMMA) is presented. Combined with trivalent counterions ([Fe(CN)6 ]3- ) both an upper and lower critical solution temperature (UCST/LCST)-type phase behavior can be realized at pH 8 and 9. PMMA and PMMA-based block copolymers are readily accessible by living anionic and controlled radical polymerization techniques, which opens access to various responsive polymer architectures based on the developed functionalization method. This method can also be applied on melt-processed bulk PMMA samples to introduce functional, responsive moieties at the PMMA surface.

Confined Crystallization of Spin-Crossover Nanoparticles in Block-Copolymer Micelles.

Nanoparticles of the spin-crossover coordination polymer [FeL(bipy)]n were synthesized by confined crystallization within the core of polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) diblock copolymer micelles. The 4VP units in the micellar core act as coordination sites for the Fe complex. In the bulk material, the spin-crossover nanoparticles in the core are well isolated from each other allowing thermal treatment without disintegration of their structure. During annealing above the glass transition temperature of the PS block, the transition temperature is shifted gradually to higher temperatures from the as-synthesized product (T1/2 ↓=163 K and T1/2 ↑=170 K) to the annealed product (T1/2 ↓=203 K and T1/2 ↑=217 K) along with an increase in hysteresis width from 6 K to 14 K. Thus, the spin-crossover properties can be shifted towards the properties of the related bulk material. The stability of the nanocomposite allows further processing, such as electrospinning from solution.

Synthesis of Zn-based 1D and 2D coordination polymer nanoparticles in block copolymer micelles.

Nanoparticles of the 1D and 2D coordination polymers [Zn(OAc)2(bipy)] n and [Zn(TFA)2(bppa)2] n were prepared, employing polystyrene-block-poly(4-vinylpyridine) diblock copolymers with different weight fractions of the 4-vinylpyridine (4VP) block and comparable overall molecular weights of M n ≈ 155 kg mol-1 as template (SV-15 and SV-42 with 15 and 42 wt% 4VP, respectively). [Zn(OAc)2(bipy)] n nanoparticles were successfully synthesised within the 4VP core of SV-42 micelles, showing a core size of D core = 47 ± 5 nm and a hydrodynamic diameter of D h = 157 ± 46 nm, determined by transmission electron microscopy (TEM) and dynamic light scattering (DLS). The crystallinity of the composite is quite low, showing only low intensity reflexes in the powder X-ray diffraction (PXRD) pattern with the highest particle load. No indications for larger microcrystals were detected by scanning electron microscopy (SEM), proving the successful integration of the coordination polymer nanoparticles within the micellar cores. Nanocomposites of the 2D coordination network [Zn(TFA)2(bppa)2] n were synthesised using both diblock copolymers. The particle core sizes (from TEM) and hydrodynamic diameters (from DLS) correlate with the 4VP fraction of the micelles, resulting in D core = 46 ± 6 nm for SV-42 and 15 ± 2 nm for SV-15 and D h = 340 ± 153 nm and 177 ± 57 nm, respectively. The successful synthesis was proven by PXRD and SEM images, confirming the absence of larger crystallites. Hence, it is possible to synthesise nanocomposites of Zn-based 1D and 2D coordination polymers by a direct approach utilizing diblock copolymer micelles as template.

Influence of patch size and chemistry on the catalytic activity of patchy hybrid nonwovens.

In this work, we provide a detailed study on the influence of patch size and chemistry on the catalytic activity of patchy hybrid nonwovens in the gold nanoparticle (Au NP) catalysed alcoholysis of dimethylphenylsilane in n-butanol. The nonwovens were produced by coaxial electrospinning, employing a polystyrene solution as the core and a dispersion of spherical or worm-like patchy micelles with functional, amino group-bearing patches (dimethyl and diisopropyl amino groups as anchor groups for Au NP) as the shell. Subsequent loading by dipping into a dispersion of preformed Au NPs yields the patchy hybrid nonwovens. In terms of NP stabilization, i.e., preventing agglomeration, worm-like micelles with poly(N,N-dimethylaminoethyl methacrylamide) (PDMA) patches are most efficient. Kinetic studies employing an extended 1st order kinetics model, which includes the observed induction periods, revealed a strong dependence on the accessibility of the Au NPs' surface to the reactants. The accessibility is controlled by the swellability of the functional patches in n-butanol, which depends on both patch chemistry and size. As a result, significantly longer induction (t ind) and reaction (t R) times were observed for the 1st catalysis cycles in comparison to the 10th cycles and nonwovens with more polar PDMA patches show a significantly lower t R in the 1st catalysis cycle. Thus, the unique patchy surface structure allows tailoring the properties of this "tea-bag"-like catalyst system in terms of NP stabilization and catalytic performance, which resulted in a significant reduction of t R to about 4 h for an optimized system.

High-Temperature Spray-Dried Polymer/Bacteria Microparticles for Electrospinning of Composite Nonwovens.

Living Micrococcus luteus (M. luteus) and Escherichia coli (E. coli) are encapsulated in poly(vinyl alcohol), poly(vinylpyrrolidone), hydroxypropyl cellulose, and gelatin by high-temperature spray drying. The challenge is the survival of the bacteria during the standard spray-drying process at temperatures of 150 °C (M. luteus) and 120 °C (E. coli). Raman imaging and transmission electron microscopy indicate encapsulated bacteria in hollow composite microparticles. The versatility of the spray-dried polymer bacteria microparticles is successfully proved by standard polymer solution-processing techniques such as electrospinning, even with harmful solvents, to water-insoluble polyacrylonitrile, polystyrene, poly(methyl methacrylate), and poly(vinyl butyrate) nanofiber nonwovens, which opens numerous new opportunities for novel applications.

Strategies for the selective loading of patchy worm-like micelles with functional nanoparticles.

Block copolymer self-assembly in solution paves the way for the construction of well-defined compartmentalized nanostructures. These are excellent templates for the incorporation and stabilisation of nanoparticles (NPs), giving rise to highly relevant applications in the field of catalysis or sensing. However, the regio-selective incorporation of NPs in specific compartments is still an issue, especially concerning the loading with different NP types. Using crystallisation-driven self-assembly (CDSA), functional worm-like crystalline-core micelles (wCCMs) with a tailor-made, nanometre-sized patchy corona were prepared as versatile templates for the incorporation and stabilisation of metal and metal oxide NPs. Different strategies, like ligand exchange or co-precipitation of polymer stabilised NPs with one surface patch, were developed that allow the incorporation of NPs in specific regions of the patchy wCCM corona. Independent of the NP type and the incorporation method, the NPs showed no tendency for agglomeration and were fixed within the corona patches of the wCCMs. The binary loading of patchy micelles with metal and metal oxide NPs was realised by combining different loading strategies, yielding hybrids with homogeneously dispersed NPs guided by the patchy structure of the template.