ABSTRACT
Super-resolution (SR) is a technique used in digital image processing to overcome the resolution limitation of imaging systems. In this process, a single high resolution image is reconstructed from multiple low resolution images. SR is commonly used for CCD and CMOS (Complementary Metal-Oxide-Semiconductor) sensor images, as well as for medical applications, e.g., magnetic resonance imaging. Here, we demonstrate that super-resolution can be applied with scanning light stimulation (LS) systems, which are common to obtain space-resolved electro-optical parameters of a sample. For our purposes, the Projection Onto Convex Sets (POCS) was chosen and modified to suit the needs of LS systems. To demonstrate the SR adaption, an Optical Beam Induced Current (OBIC) LS system was used. The POCS algorithm was optimized by means of OBIC short circuit current measurements on a multicrystalline solar cell, resulting in a mean square error reduction of up to 61% and improved image quality.
ABSTRACT
Recently, a scanning light stimulation system with an automated, adaptive focus correction during the measurement was introduced. Here, its application on encapsulated devices is discussed. This includes the changes an encapsulating optical medium introduces to the focusing process as well as to the subsequent light stimulation measurement. Further, the focusing method is modified to compensate for the influence of refraction and to maintain a minimum beam diameter on the sample surface.
ABSTRACT
This note describes the construction and engineering of a high precision Harman set-up for metrology of the thermoelectric figure of merit (ZT) of modules and materials based on steady state AC and DC measurements. The Harman technique presented in this article has a resolution of milli-ZT and it does not employ lock-in amplifiers or AC bridges; rather, the technique is developed to avoid typical complications experienced in AC Harman systems. By one-time reference measurements the best operation point for the system is chosen, minimizing the effects of capacitive loads due to AC signals.
ABSTRACT
In this article a novel principle to achieve optimal focusing conditions or rather the smallest possible beam diameter for scanning light stimulation systems is presented. It is based on the following methodology: First, a reference point on a camera sensor is introduced where optimal focusing conditions are adjusted and the distance between the light focusing optic and the reference point is determined using a laser displacement sensor. In a second step, this displacement sensor is used to map the topography of the sample under investigation. Finally, the actual measurement is conducted, using optimal focusing conditions in each measurement point at the sample surface, that are determined by the height difference between camera sensor and the sample topography. This principle is independent of the measurement values, the optical or electrical properties of the sample, the used light source, or the selected wavelength. Furthermore, the samples can be tilted, rough, bent, or of different surface materials. In the following the principle is implemented using an optical beam induced current system, but basically it can be applied to any other scanning light stimulation system. Measurements to demonstrate its operation are shown, using a polycrystalline silicon solar cell.
ABSTRACT
Nanocrystalline bulk materials are desirable for many applications as they combine mechanical strength and specific electronic transport properties. Our bottom-up approach starts with tailored nanoparticles. Compaction and thermal treatment are crucial, but usually the final stage sintering is accompanied by rapid grain growth which spoils nanocrystallinity. For electrically conducting nanoparticles, field activated sintering techniques overcome this problem. Small grain sizes have been maintained in spite of consolidation. Nevertheless, the underlying principles, which are of high practical importance, have not been fully elucidated yet. In this combined experimental and theoretical work, we show how the developing microstructure during sintering correlates with the percolation paths of the current through the powder using highly doped silicon nanoparticles as a model system. It is possible to achieve a nanocrystalline bulk material and a homogeneous microstructure. For this, not only the generation of current paths due to compaction, but also the disintegration due to Joule heating is required. The observed density fluctuations on the micrometer scale are attributed to the heat profile of the simulated powder networks.
