Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 3 de 3
Filter
Add more filters










Database
Language
Publication year range
1.
Opt Express ; 22(2): 1742-8, 2014 Jan 27.
Article in English | MEDLINE | ID: mdl-24515181

ABSTRACT

Mode-locking of single-section Fabry-Pérot InAs/InP edge emitting quantum dash based lasers at 1.56 µm under continuous wave operation is studied by second-harmonic generation frequency resolved optical gating. Self-starting pulses of a width down to 374 fs can be observed after external chirp compensation using standard single-mode fiber (SMF-28). Pulse compression using different lengths of SMF-28 and pulse shape as well as phase dependence on bias conditions are investigated. Consistency with stepped-heterodyne technique for advanced pulse characterization is shown.

2.
Opt Express ; 21(5): 5715-36, 2013 Mar 11.
Article in English | MEDLINE | ID: mdl-23482144

ABSTRACT

We investigate the nonlinear propagation of an ultra-short, 150 fs, optical pulse along the waveguide of a quantum dot (QD) laser operating above threshold. We demonstrate that among the various nonlinear processes experienced by the propagating pulse, four-wave mixing (FWM) between the pulse and the two oscillating counter-propagating cw fields of the laser is the dominant one. FWM has two important consequences. One is the creation of a spectral hole located in the vicinity of the cw oscillating frequency. The width of the spectral hole is determined by an effective carrier and gain relaxation time. The second is a modification of the shape of the trailing edge of the pulse. The wave mixing involves first and second order processes which result in a complicated interaction among several fields inside the cavity, some of which are cw while the others are time varying, all propagating in both directions. The nonlinear pulse propagation is analyzed using two complementary theoretical approaches. One is a semi-analytical model which considers only the wave mixing interaction between six field components, three of which propagate in each direction (two cw fields and four time-varying signals). This model predicts the deformation of the tail of the output signal by a secondary idler wave, produced in a cascaded FWM process, which co-propagates with the original injected pulse. The second approach is a finite-difference time-domain simulation, which considers also additional nonlinear effects, such as gain saturation and self-phase modulation. The theoretical results are confirmed by a series of experiments in which the time dependent amplitude and phase of the pulse after propagation are measured using the cross-frequency-resolved optical gating technique.

3.
Opt Express ; 18(4): 3415-25, 2010 Feb 15.
Article in English | MEDLINE | ID: mdl-20389351

ABSTRACT

A complete characterization of pulse shape and phase of a 1.3 microm, monolithic-two-section, quantum-dot mode-locked laser (QD-MLL) at a repetition rate of 40 GHz is presented, based on frequency resolved optical gating. We show that the pulse broadening of the QD-MLL is caused by linear chirp for all values of current and voltage investigated here. The chirp increases with the current at the gain section, whereas larger bias at the absorber section leads to less chirp and therefore to shorter pulses. Pulse broadening is observed at very high bias, likely due to the quantum confined stark effect. Passive- and hybrid-QD-MLL pulses are directly compared. Improved pulse intensity profiles are found for hybrid mode locking. Via linear chirp compensation pulse widths down to 700 fs can be achieved independent of current and bias, resulting in a significantly increased overall mode-locking range of 101 MHz. The suitability of QD-MLL chirp compensated pulse combs for optical communication up to 160 Gbit/s using optical-time-division multiplexing are demonstrated by eye diagrams and autocorrelation measurements.


Subject(s)
Lasers , Quantum Dots , Signal Processing, Computer-Assisted/instrumentation , Telecommunications/instrumentation , Equipment Design , Equipment Failure Analysis , Microwaves
SELECTION OF CITATIONS
SEARCH DETAIL
...