Aging processes in dental thermoplastics - Thermoanalytical investigations and effects on Vickers as well as Martens hardness.

OBJECTIVE: The influence of various aging protocols, representing and accelerating influences present in the dental context, on possible changes in the microstructure and mechanical properties of thermoplastics was investigated. In order to minimize the complexity of the systems, first pure polymers and then later the equivalent dental polymeric materials were analyzed. MATERIALS AND METHODS: Pure polymers (Poly(methyl methacrylate) - PMMA, Polyoxymethylene homopolymer - POM-H, Polyether ether ketone - PEEK, Nylon 12 - PA12, Polypropylene - PP) were analyzed before as well as after applying different aging protocols relevant to the oral environment (ethanol, thermocycling, alkaline and acidic setting) by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The thermoanalytical parameters used were glass transition temperature (Tg), melting peak and crystallization peak temperature (Tpm, Tpc) and decomposition behavior. In a second step selected commercially available dental products (Telio CAD - PMMAD, Zirlux Acetal - POMD, Juvora Natural Dental Disc - PEEKD) aged by the protocol that previously showed strong effects were examined and additionally tested for changes in their Vickers and Martens hardness by Mann-Whitney-U test. RESULTS: The combinations of pure polymers and viable aging protocols analyzed within this study were identified via TGA or DSC as PA12 & thermocycling, POM-H & denture cleanser/lactic acid/ethanol, PP & lactic acid. The dental polymeric materials PMMAD and POMD due to aging in lactic acid showed slight but significantly (p < 0.01) reduced Vickers and partly Martens hardness. PEEK showed the greatest material resistance within this study.

Retention force, translucency, and microstructural properties of translucent temporary luting cements: An in vitro study.

The aim of the study was to investigate the retention behaviour (pull-off force include adhesive remnant index = ARI) as well as translucency of various temporary luting cements and use microstructure elucidation methods to formulate explanatory approaches to their mode of action. The retention force of the temporary luting cements Provicol QM Plus (P+), Provicol QM Aesthetic (Pae), Bifix Temp (BiT), and as a reference a glass ionomer cement Meron (M) with a direct (Structur 3/S3) or an indirect (Structure CAD/SCAD) resin-based composite restauration was investigated after accelerated aging (thermocycling). Additional investigation of the physical properties was performed regarding to translucency and surface free energy. The microstructure was evaluated by X-ray diffraction, thermogravimetric analysis, differential scanning calorimetry and micro X-ray computed tomography. All tested temporary luting cements showed different pull-off forces in the range between 3.0 and 16.8 N in combination with S3 or SCAD after thermocycling. Only BiT with S3 showed pull-off forces of 129.2 N and complete retention on the restoration (ARI = 0), which was significant (p < .001) to all other samples. High translucency (BiT > Pae > M > P+) was observed for materials with lower crystalline content and low residual mass (usally resulting from higher organic content). M showed the highest surface free energy with a predominantly polar fraction, while BiT had a predominantly dispersive fraction. The highest porosity was observed in the coronal region of the restoration. The results suggest that translucency of temporary luting cements can be increased with higher organic and lower cryristall content. All combinations of cements and temporary restorations (direct/indirect; with the exception of BiT/S3) showed pull-off forces below 17 N (equivalent to a weight force of ∼1.7 kg), which allows manual detachment of the restoration by the dentist.

Influence of the Application Time of Silane for the Bonding Performance between Feldspar or Lithium Disilicate Ceramics and Luting Resin Composites.

A correct silanization time is essential for successful surface functionalization and sufficient bonding to dental ceramics. The shear bond strength (SBS) of lithium disilicate (LDS) and feldspar (FSC) ceramics and luting resin composite was investigated with respect to different silanization times, taking into account the physical properties of the individual surfaces. The SBS test was performed with a universal testing machine, and the fracture surfaces were evaluated by stereomicroscopy. The surface roughness of the prepared specimens was analyzed after etching. Changes in surface properties due to surface functionalization were evaluated by surface free energy (SFE) via contact angle measurement. Fourier transform infrared spectroscopy (FTIR) was used to determine the chemical binding. The roughness and SBS of the control group (no silane, etched) were higher for FSC than for LDS. Regarding the SFE, the dispersive fraction increased and the polar fraction decreased after silanization. FTIR confirmed the presence of silane on the surfaces. The SBS of LDS showed a significant increase from 5 to 15 s, depending on the silane and luting resin composite. For FSC, cohesive failure was observed for all samples. For LDS specimens, a silane application time of 15 to 60 s is recommended. Based on clinical conditions, no difference between the silanization times was observed for FSC specimens, indicating that etching alone produces sufficient bonding.

Aging Processes and Their Influence on the Mechanical Properties of Printable Occlusal Splint Materials.

Three-dimensional (3D)-printed occlusal splints are becoming more prevalent in the treatment of tooth substance loss due to their fast and cost-effective production. The purpose of this in vitro study was to investigate whether the mechanical properties (tensile strength-TS, modulus of elasticity in tension-ME, and Vickers hardness-HV) vary between the materials (printed dimethacrylate-based resins: Keyprint KeySplint soft-KEY, Luxaprint Ortho Plus-LUX, V-Print splint-VPR, printed methacrylate-based resins Freeprint splint 2.0-FRE, and milled methacrylate-based material, CLEAR splint-CLE), and the influence of aging processes (extraoral storage conditions and nightly or daily use) was examined. The printed methacrylate-based resins (FRE, LUX, and VPR) had much higher TS (43.7-48.5 MPa compared to 12.3-13.3 MPa), higher ME (2.01-2.37 GPa compared to 0.43-0.72 GPa), and higher HV (11.8-15.0 HV compared to 3.3-3.5 HV) than both of the methacrylate-based resins (KEY and CLE) after the production process. Although the TS, ME, and HV of the printed dimethacrylate resins (FRE, LUX, and VPR) decreased significantly under humid conditions with possibly elevated temperatures (thermocycling as well as 37 °C), these mechanical properties were significantly higher than both methacrylate-based resins (KEY and CLE). Therefore, printed dimethacrylate resins should be used rather than methacrylate-based resins for high expected masticatory forces, low wall thicknesses, or very long wearing times (≥6 months).

Acid Resistance of CAD/CAM Resin Composites.

Acid resistance of CAD/CAM resin composites. Erosion-related tooth surface loss is closely related to acid exposure, such as contact with acidic beverages or disease-related reflux. As a result, dental restorations in affected patients are also exposed to acids, which indicates that the performance and longevity of a dental restoration is impacted by the acid resistance of the individually employed restorative materials. However, unlike for ceramic materials, the acid resistance of CAD/CAM resin composites is not commonly evaluated by the manufacturers, and no standardised test methods have yet been established. Against this background, the present in vitro study aimed to examine the long-term resistance of CAD/CAM resin composites (Brilliant Crios, Cerasmart, Grandio blocs, Lava Ultimate, Shofu Block HC) against three acidic media (tonic water, acetic acid, hydrochloric acid) as well as demineralized water and to investigate potential damage mechanisms. Changes in surface roughness (Sa) were detected by confocal laser scanning microscopy (CLSM), and changes in surface hardness were measured using Vickers hardness (HV). The damage mechanisms were analysed by scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) and micro X-ray computer tomography (µXCT). For each material, few changes in either Sa or HV were identified for at least one of the different media; for Cerasmart, the sharpest deterioration in surface properties was observed. SEM-EDS revealed leaching of barium, aluminium, and titanium from fillers in a 2 µm zone on the rough but not on the polished surface of the specimen. Within the limitations of the current study, it can be concluded that polished CAD/CAM resin composites can be recommended for clinical use in patients with erosive conditions.

Acid resistance of self-adhesive resin luting cements - changes in surface texture parameters and microhardness.

OBJECTIVES: When consumed in excess, acidic foods and beverages can cause dental erosions leading to irreversible loss of tooth substance. In many cases, prosthetic rehabilitation of the damaged teeth is mandatory. The aim of this in vitro study was to investigate, for the first time on this scale, the resistance of various commonly used self-adhesive resin luting cements (Bifix SE, VOCO; G-Cem LinkAce, GC; RelyX Unicem, 3 M Oral Care; SpeedCEM Plus, Ivoclar ) against acidic media, and to find out whether they can withstand long-term exposure. These results were compared with an adhesive resin luting cement (Panavia V5, Kuraray) that functioned as reference gold standard. Furthermore we applied area roughness parameters for surface texture analysis in the present investigation, to highlight their advantages for investigations on the surface quality of resin luting cements. METHODS: Six specimens with identical diameter (10 mm) and thickness (3 mm) were prepared from each self-adhesive and adhesive resin luting cement and forwarded to an incubation in various acidic media for a period of 232 h. Conductivity and pH-values of each acidic medium was analyzed for each material group prior (t 0) and after exposure (t 1). The specimens were examined for Vickers microhardness and surface quality. For the evaluation of surface roughness, the parameters Sa, Sdr, Spc Spk, Sk, and Svk were investigated by using different filtered surfaces (S-L; S-F) according to ISO 25 178. Statistical analysis was conducted at a significance level of α = 0.050. RESULTS: For the evaluation of the acid resistance of self-adhesive resin luting cements investigations on conductivity and pH-value assessment of storage solution appear unsuitable, while the assessment of microhardness and surface analysis revealed valid data. It could be shown that changes in surface texture of the resin luting cements can be determinend in qualitative and quantitative manner. While the microhardness and surface quality of some resin luting cements hardly changed, others showed significantly reduced values in microhardness and changes in their surface quality (p < 0.001). SIGNIFICANCE: The data of the current study emphasize the relevance of interactions between resin luting cements and acids and suggest further laboratory and clinical studies to elucidate its impact on the clinical performance of the materials investigated.

Thermoanalytical Investigations on the Influence of Storage Time in Water of Resin-Based CAD/CAM Materials.

New resin-based composites and resin-infiltrated ceramics are used to fabricate computer-aided design (CAD) and computer-aided manufacturing (CAM)-based restorations, although little information is available on the long-term performance of these materials. The aim of this investigation was to determine the effects of storage time (24 h, 90 days, 180 days) on the thermophysical properties of resin-based CAD/CAM materials. Thermogravimetric Analysis (TGA), differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) were used in the study. TGA provided insight into the composition of the resin-based materials and the influence of internal plasticization and water sorption. Resin-based composites showed different decomposition, heat energy and mechanical behavior, which was influenced by storage time in water. Individual materials such as Grandio bloc showed lower influence of water storage while maintaining good mechanical properties.

Polyoxymethylene as Material for Removable Partial Dentures-A Literature Review and Illustrating Case Report.

Compared to thermoplastic manufacturing techniques, computer-aided design (CAD) and computer-aided manufacturing (CAM) technologies make it easier to process modern restorative and prosthetic materials with improved material properties. In dentistry, tooth-colored alternatives to metal-based frameworks for application in removable dental prostheses (RDP) emerged. With regard to this aspect, the current article provides an overview of the specific material properties of polyoxymethylene (POM). Furthermore, it reviews scientific literature indexed in PubMed and Web of Science that focuses on RDPs fabricated from POM within the last 10 years. Finally, a prosthetic rehabilitation of a patient with a RDP fabricated from POM is illustrated and observations during a follow-up over 10 months are described. Scientific data and clinical observations indicate that polyoxymethylene is a promising material that bridges gaps in dental therapeutic options. While survival time may be limited due to wear, POM might be a favorable option for application in semi-permanent restorations.

Is Micro X-ray Computer Tomography a Suitable Non-Destructive Method for the Characterisation of Dental Materials?

The aim of the study was to investigate the effect of X-rays used in micro X-ray computer tomography (µXCT) on the mechanical performance and microstructure of a variety of dental materials. Standardised bending beams (2 × 2 × 25 mm3) were forwarded to irradiation with an industrial tomograph. Using three-dimensional datasets, the porosity of the materials was quantified and flexural strength was investigated prior to and after irradiation. The thermal properties of irradiated and unirradiated materials were analysed and compared by means of differential scanning calorimetry (DSC). Single µXCT measurements led to a significant decrease in flexural strength of polycarbonate with acrylnitril-butadien-styrol (PC-ABS). No significant influence in flexural strength was identified for resin-based composites (RBCs), poly(methyl methacrylate) (PMMA), and zinc phosphate cement (HAR) after a single irradiation by measurement. However, DSC results suggest that changes in the microstructure of PMMA are possible with increasing radiation doses (multiple measurements, longer measurements, higher output power from the X-ray tube). In summary, it must be assumed that X-ray radiation during µXCT measurement at high doses can lead to changes in the structure and properties of certain polymers.

Characterisation of the Filler Fraction in CAD/CAM Resin-Based Composites.

The performance of dental resin-based composites (RBCs) heavily depends on the characteristic properties of the individual filler fraction. As specific information regarding the properties of the filler fraction is often missing, the current study aims to characterize the filler fractions of several contemporary computer-aided design/computer-aided manufacturing (CAD/CAM) RBCs from a material science point of view. The filler fractions of seven commercially available CAD/CAM RBCs featuring different translucency variants were analysed using Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDS), Micro-X-ray Computed Tomography (µXCT), Thermogravimetric Analysis (TG) and X-ray Diffractometry (XRD). All CAD/CAM RBCs investigated included midifill hybrid type filler fractions, and the size of the individual particles was clearly larger than the individual specifications of the manufacturer. The fillers in Shofu Block HC featured a sphericity of ≈0.8, while it was <0.7 in all other RBCs. All RBCs featured only X-ray amorphous phases. However, in Lava Ultimate, zircon crystals with low crystallinity were detected. In some CAD/CAM RBCs, inhomogeneities (X-ray opaque fillers or pores) with a size <80 µm were identified, but the effects were minor in relation to the total volume (<0.01 vol.%). The characteristic parameters of the filler fraction in RBCs are essential for the interpretation of the individual material's mechanical and optical properties.