Mechanical properties of cell- and microgel bead-laden oxidized alginate-gelatin hydrogels.

3D-printing technologies, such as biofabrication, capitalize on the homogeneous distribution and growth of cells inside biomaterial hydrogels, ultimately aiming to allow for cell differentiation, matrix remodeling, and functional tissue analogues. However, commonly, only the mechanical properties of the bioinks or matrix materials are assessed, while the detailed influence of cells on the resulting mechanical properties of hydrogels remains insufficiently understood. Here, we investigate the properties of hydrogels containing cells and spherical PAAm microgel beads through multi-modal complex mechanical analyses in the small- and large-strain regimes. We evaluate the individual contributions of different filler concentrations and a non-fibrous oxidized alginate-gelatin hydrogel matrix on the overall mechanical behavior in compression, tension, and shear. Through material modeling, we quantify parameters that describe the highly nonlinear mechanical response of soft composite materials. Our results show that the stiffness significantly drops for cell- and bead concentrations exceeding four million per milliliter hydrogel. In addition, hydrogels with high cell concentrations (≥6 mio ml-1) show more pronounced material nonlinearity for larger strains and faster stress relaxation. Our findings highlight cell concentration as a crucial parameter influencing the final hydrogel mechanics, with implications for microgel bead drug carrier-laden hydrogels, biofabrication, and tissue engineering.

Complex mechanical behavior of human articular cartilage and hydrogels for cartilage repair.

The mechanical behavior of cartilage tissue plays a crucial role in physiological mechanotransduction processes of chondrocytes and pathological changes like osteoarthritis. Therefore, intensive research activities focus on the identification of implant substitute materials that mechanically mimic the cartilage extracellular matrix. This, however, requires a thorough understanding of the complex mechanical behavior of both native cartilage and potential substitute materials to treat cartilage lesions. Here, we perform complex multi-modal mechanical analyses of human articular cartilage and two surrogate materials, commercially available ChondroFillerliquid, and oxidized alginate-gelatin (ADA-GEL) hydrogels. We show that all materials exhibit nonlinearity and compression-tension asymmetry. However, while hyaline cartilage yields higher stresses in tension than in compression, ChondroFillerliquid and ADA-GEL exhibit the opposite trend. These characteristics can be attributed to the materials' underlying microstructure: Both cartilage and ChondroFillerliquid contain fibrillar components, but the latter constitutes a bi-phasic structure, where the 60% nonfibrillar hydrogel proportion dominates the mechanical response. Of all materials, ChondroFillerliquid shows the most pronounced viscous effects. The present study provides important insights into the microstructure-property relationship of cartilage substitute materials, with vital implications for mechanically-driven material design in cartilage engineering. In addition, we provide a data set to create mechanical simulation models in the future.

MyoRobot 2.0: An advanced biomechatronics platform for automated, environmentally controlled skeletal muscle single fiber biomechanics assessment employing inbuilt real-time optical imaging.

We present an enhanced version of our previously engineered MyoRobot system for reliable, versatile and automated investigations of skeletal muscle or linear polymer material (bio)mechanics. That previous version already replaced strenuous manual protocols to characterize muscle biomechanics properties and offered automated data analysis. Here, the system was further improved for precise control over experimental temperature and muscle single fiber sarcomere length. Moreover, it also now features the calculation of fiber cross-sectional area via on-the-fly optical diameter measurements using custom-engineered microscope optics. With this optical systems integration, the MyoRobot 2.0 allows to tailor a wealth of recordings for relevant physiological parameters to be sequentially executed in living single myofibers. Research questions include assessing temperature-dependent performance of active or passive biomechanics, or automated control over length-tension or length-velocity relations. The automatically obtained passive stress-strain relationships and elasticity modules are important parameters in (bio)material science. From the plethora of possible applications, we validated the improved MyoRobot 2.0 by assessing temperature-dependent myofibrillar Ca2+ sensitivity, passive axial compliance and Young's modulus. We report a Ca2+ desensitization and a narrowed dynamic range at higher temperatures in murine M. extensor digitorum longus single fibers. In addition, an increased axial mechanical compliance in single muscle fibers with Young's moduli between 40 - 60 kPa was found, compatible with reported physiological ranges. These applications demonstrate the robustness of our MyoRobot 2.0 for facilitated single muscle fiber biomechanics assessment.

Adding dimension to cellular mechanotransduction: Advances in biomedical engineering of multiaxial cell-stretch systems and their application to cardiovascular biomechanics and mechano-signaling.

Hollow organs (e.g. heart) experience pressure-induced mechanical wall stress sensed by molecular mechano-biosensors, including mechanosensitive ion channels, to translate into intracellular signaling. For direct mechanistic studies, stretch devices to apply defined extensions to cells adhered to elastomeric membranes have stimulated mechanotransduction research. However, most engineered systems only exploit unilateral cellular stretch. In addition, it is often taken for granted that stretch applied by hardware translates 1:1 to the cell membrane. However, the latter crucially depends on the tightness of the cell-substrate junction by focal adhesion complexes and is often not calibrated for. In the heart, (increased) hemodynamic volume/pressure load is associated with (increased) multiaxial wall tension, stretching individual cardiomyocytes in multiple directions. To adequately study cellular models of chronic organ distension on a cellular level, biomedical engineering faces challenges to implement multiaxial cell stretch systems that allow observing cell reactions to stretch during live-cell imaging, and to calibrate for hardware-to-cell membrane stretch translation. Here, we review mechanotransduction, cell stretch technologies from uni-to multiaxial designs in cardio-vascular research, and the importance of the stretch substrate-cell membrane junction. We also present new results using our IsoStretcher to demonstrate mechanosensitivity of Piezo1 in HEK293 cells and stretch-induced Ca2+ entry in 3D-hydrogel-embedded cardiomyocytes.

Calcium Sensitive Fluorescent Dyes Fluo-4 and Fura Red under Pressure: Behaviour of Fluorescence and Buffer Properties under Hydrostatic Pressures up to 200 MPa.

The fluorescent Ca2+ sensitive dyes Fura Red (ratiometric) and Fluo-4 (non-ratiometric) are widely utilized for the optical assessment of Ca2+ fluctuations in vitro as well as in situ. The fluorescent behavior of these dyes is strongly depends on temperature, pH, ionic strength and pressure. It is crucial to understand the response of these dyes to pressure when applying calcium imaging technologies in the field of high pressure bioscience. Therefore, we use an optically accessible pressure vessel to pressurize physiological Ca2+-buffered solutions at different fixed concentrations of free Ca2+ (1 nM to 25.6 µM) and a specified dye concentration (12 µM) to pressures of 200 MPa, and record dye fluorescence intensity. Our results show that Fluo-4 fluorescence intensity is reduced by 31% per 100 MPa, the intensity of Fura Red is reduced by 10% per 100 MPa. The mean reaction volume for the dissociation of calcium from the dye molecules [Formula: see text] is determined to -17.8 ml mol-1 for Fluo-4 and -21.3 ml mol-1 for Fura Red. Additionally, a model is presented that is used to correct for pressure-dependent changes in pH and binding affinity of Ca2+ to EGTA, as well as to determine the influence of these changes on dye fluorescence.