Biodiesel synthesis by direct transesterification of microalga Botryococcus braunii with continuous methanol reflux.

Direct transesterification of Botryococcus braunii with continuous acyl acceptor reflux was evaluated. This method combines in one step lipid extraction and esterification/transesterification. Fatty acid methyl esters (FAME) synthesis by direct conversion of microalgal biomass was carried out using sulfuric acid as catalyst and methanol as acyl acceptor. In this system, once lipids are extracted, they are contacted with the catalyst and methanol reaching 82%wt of FAME yield. To optimize the reaction conditions, a factorial design using surface response methodology was applied. The effects of catalyst concentration and co-solvent concentration were studied. Hexane was used as co-solvent for increasing lipid extraction performance. The incorporation of hexane in the reaction provoked an increase in FAME yield from 82% (pure methanol) to 95% when a 47%v/v of hexane was incorporated in the reaction. However, the selectivity towards non-saponifiable lipids such as sterols was increased, negatively affecting biodiesel quality.

Novel description of mcl-PHA biosynthesis by Pseudomonas chlororaphis from animal-derived waste.

A novel description of mcl-PHA biosynthesis by Ps. chlororaphis from tallow-based biodiesel as an inexpensive carbon feed stock is presented. Fermentation protocols, kinetic analysis, an efficient product recovery strategy, and product characterization are included. Maximum specific growth rates (µmax.) of 0.08 h(-1), 0.10 h(-1) and 0.13 h(-1), respectively, were achieved in three different fermentation set-ups. Volumetric productivity for mcl-PHA amounted to 0.071 g/L h, 0.094 g/L h and 0.138 g/L h, final intracellular PHA contents calculated from the sum of active biomass and PHA from 22.1 to 29.4 wt.-%, respectively. GC-FID analysis showed that the obtained biopolyester predominantly consists of 3-hydroxyoctanoate and 3-hydroxydecanoate, and, to a minor extent, 3-hydroxydodecanoate, 3-hydroxynonanoate, 3-hydroxyhexanoate, and 3-hydroxyheptanoate monomers. The overall distribution of the monomers remained similar, regardless to working volumes, biodiesel concentrations and pre-treatment of the inoculum.

Mathematical modeling of poly[(R)-3-hydroxyalkanoate] synthesis by Cupriavidus necator DSM 545 on substrates stemming from biodiesel production.

Two low structured mathematical models for fed-batch production of polyhydroxybutyrate and poly[hydroxybutyrate-co-hydroxyvalerate] by Cupriavidus necator DSM 545 on renewable substrates (glycerol and fatty acid methyl esters-FAME) combined with glucose and valeric acid, were established. The models were used for development/optimization of feeding strategies of carbon and nitrogen sources concerning PHA content and polymer/copolymer composition. Glycerol/glucose fermentation featured a max. specific growth rate of 0.171 h(-1), a max. specific production rate of 0.038 h(-1) and a PHB content of 64.5%, whereas the FAME/valeric acid fermentation resulted in a max. specific growth rate of 0.046 h(-1), a max. specific production rate of 0.07 h(-1) and 63.6% PHBV content with 4.3% of 3-hydroxyvalerate (3HV) in PHBV. A strong inhibition of glycerol consumption by glucose was confirmed (inhibition constant ki,G=4.28×10(-4) g L(-1)). Applied concentration of FAME (10-12 g L(-1)) positively influenced on PHBV synthesis. HV/PHBV ratio depends on applied VA concentration.

Novel sensitive determination of steryl glycosides in biodiesel by gas chromatography-mass spectroscopy.

A new method was developed for the quantitative analysis of steryl glycosides in biodiesel (fatty acid methyl esters). This method is much more sensitive than existing methods and has minimum limits of quantification of 50 µg/kg, compared to previously published minimum limits of quantification of about 15 mg/kg. The analysis is based on gas chromatography-mass spectroscopy determination of simple pre-treated and silylated samples via single ion monitoring at 204, 217, 247 m/z, which are specific ions for the silylated sugar moiety. Quantification was carried out using cholesteryl ß-D-glucopyranoside as internal standard. The modified synthesis and purification of the internal standard is also presented as well as the characterization by NMR and mass spectroscopy. The advantage of the method compared with other approaches is the simplified sample preparation avoiding extra pre-treatment steps coupled with complete derivatization of the sugar hydroxyl groups by using N,O-bis(trimethylsilyl)acetamide with 5% trimethylchlorosilane as derivatization reagent. On the given conditions high recovery rates ≥ 89% can be obtained. Evaluation of lab specific variance and intermediate precision underline the robustness of the method which will be further assessed by Round robin tests.