Synchronized beamline at FLASH2 based on high-order harmonic generation for two-color dynamics studies.

We present the design, integration, and operation of the novel vacuum ultraviolet (VUV) beamline installed at the free-electron laser (FEL) FLASH. The VUV source is based on high-order harmonic generation (HHG) in gas and is driven by an optical laser system synchronized with the timing structure of the FEL. Ultrashort pulses in the spectral range from 10 to 40 eV are coupled with the FEL in the beamline FL26, which features a reaction microscope (REMI) permanent endstation for time-resolved studies of ultrafast dynamics in atomic and molecular targets. The connection of the high-pressure gas HHG source to the ultra-high vacuum FEL beamline requires a compact and reliable system, able to encounter the challenging vacuum requirements and coupling conditions. First commissioning results show the successful operation of the beamline, reaching a VUV focused beam size of about 20 µm at the REMI endstation. Proof-of-principle photo-electron momentum measurements in argon indicate the source capabilities for future two-color pump-probe experiments.

The seroepidemiology of Lyme borreliosis in zoo animals in Germany.

We conducted the first seroepidemiological study to evaluate the exposure of zoo animals to Borrelia burgdorferi s.l. in German zoos and wildlife parks. A total of 1487 individuals representing 148 ungulate and carnivore species belonging to 19 families were examined using a non-species dependent ELISA. Specific antibodies were detected in 154 (10.4%) animals; 168 (11.3%) sera produced borderline results. The percentage of seropositive individuals was related to species and origin (zoo), and increased with age of the animals. Sex and season did not influence seroprevalence. Examination of 600 ticks (Ixodes ricinus; caught from vegetation in the zoos) by darkfield microscopy and indirect immunofluorescence technique revealed infection rates within the range typical for Central Europe. The results substantiate that there is an infection risk for zoo animals. A differential diagnosis of Lyme borreliosis should be taken into account in case of suspicious clinical symptoms and possible contact to ticks.

Chronically implanted intrafascicular recording electrodes.

A newly designed intrafascicular electrode for chronic neural recording was studied by implanting 12 electrodes in the radial nerves of 6 cats for 6 months. Action potentials were monitored at specified intervals throughout the experiment. The number and size of the signals recorded suggest that this type of electrode provides information that is appropriate for feedback control in functional electrical stimulation (FES) systems. Histology of the nerve revealed that the implants are biocompatible and that little damage is caused by the presence of the electrode.

An intrafascicular electrode for recording of action potentials in peripheral nerves.

We are developing a new type of bipolar recording electrode intended for implantation within individual fascicles of mammalian peripheral nerves. In the experiments reported here we used electrodes fabricated from 25 microns diameter Pt wire, 50 microns 90% Pt-10% Ir wire and 7 microns carbon fibers. The electrodes were implanted in the sciatic nerves of rats and in the ulnar nerves of cats. The signal-to-noise ratio of recorded activity induced by nonnoxious mechanical stimulation of the skin and joints was studied as a function of the type of electrode material used, the amount of insulation removed from the recording zone, and the longitudinal separation of the recording zones of bipolar electrode pairs. Both acute and short term (two day) chronic experiments were performed. The results indicate that a bipolar electrode made from Teflon-insulated, 25 microns diameter, 90% Pt-10% Ir wire, having a 1-2 mm long recording zone, can be used for recording of peripheral nerve activity when implanted with one wire inside the fascicle and the other lead level with the first lead, but outside the fascicle. No insulating cuff needs to be placed around the nerve trunk.

Synovial fluid examination in hyperuricemic psoriatic patients.

Aspiration of the first metatarsophalangeal joint in asymptomatic hyperuticemic psoriasis was performed in order to see whether there are specific findings which could help to predict who is prone to develop gout and to find out whether a distinction can be established between psoriasis and gouty arthritis. Since crystals were not found, it seems that the aspiration of the first metatarsophalangeal joint is not likely to yield monosodium urate crystals and is not contribute to the differential diagnosis.

Physiological and behavioral effects of prolonged exposure to 915 MHz microwaves.

Long-Evans male adult rats were exposed for 16 weeks to 915-MHz CW microwaves at an average power density of 5 mW/cm2. The resulting dose rate was 2.46 (+/- 0.29 SEM) mW/g. The animals were exposed eight hours a day, five days a week, for a total of 640 h in a monopole-above ground radiation chamber while housed in Plexiglas cages. Daily measures of body mass and of food and water intake indicated no statistically significant effects of microwave irradiation. Measures by activity wheels and stabilimetric platforms of spontaneous locomotion indicate than mean activity levels increased about 25% after microwave exposure, but the findings are doubtful statistical significance (Ps < .10 but > .05). Studies of blood sampled after 2, 6, 10, and 14 weeks of exposure revealed alterations of free sulfhydryls. Measures of levels of urinary 17-ketosteroids at weeks 1, 5, 9, and 12 of exposure, and measures of brain hypothalamic tissue, and of mass of adrenals, heart, and liver at the end of the 16-week period, revealed no significant differences between irradiated and control animals. Cortical EEGs sampled after conclusion of microwave exposures also revealed no significant differences.

Effects of dc bias currents on ECG electrodes.

The effects of small dc bias currents on the offset potentials of disposable ECG electrodes (four brands of Ag-AgCl and two brands of stainless steel) were examined. After periods ranging from a few minutes to several days, samples of all electrode types exhibited offset potentials exceeding 200 mV after subjection to dc bias currents over 200 nA. All Ag-AgCl electrodes were able to withstand bias currents of 200 nA with minimal changes in offset for periods up to 7 days. The stainless electrodes exhibited large offset potentials within minutes after subjection to bias currents of only 100 nA.

A comparison of gel-to-gel and skin measurements of electrode impedance.

Utilizing an automated test system, measurements of the 10-Hz impedance were made with electrode pairs joined gel-to-gel and electrode quartets on the skin of the backs of human volunteers. Two skin preparation procedures were examined. As a minimum skin preparation, the electrodes were applied to clean, dry skin from which body hair had been shaved if necessary. As a maximal preparation, the electrodes were applied after mild abrasion of the skin with fine emery cloth. Although the impedances measured for electrodes applied to mildly abraded skin correlated well with measurements made with electrodes of the same brand joined gel-to-gel, virtually no correlation was found if the electrodes were affixed to clean, dry skin.

The feasibility of bench tests for disposable ECG electrode adhesiveness.

The feasibility of recommending one standard bench test that adequately qualifies electrode adhesives for clinical use was examined by UBTL. Small strips, cut from whole, commercially available disposable ECG electrodes, were attached to three types of surfaces, and samples of each type of electrode were peel tested at 15 minutes, 8 hours, and 48 hours after attachment. A program was developed to average, display, and calculate peel strength parameters. Analysis of the data showed that (a) the peel strength of electrodes varied by more than a factor of 10 when measured on human skin, and by more than a factor of 3 when measured on bench test surfaces, and (b) the peel strength of the electrode adhesive strips did not correlate with intact electrode loss on ambulatory subjects. Therefore, UBTL could not recommend one bench test that would measure adhesion performance for all electrode types appropriate for inclusion in an AAMI ECG electrode standard.

Development of standard test methods for evaluating defibrillation recovery characteristics of disposable ECG electrodes.

A clinically relevant test for the measurement of defibrillation overload recovery of prefilled disposable ECG electrodes was developed and is proposed for use in an ECG electrode standard under development by AAMI. Defibrillation overload voltages and currents, as well as electrode polarization recovery voltages, were first measured in animal tests on 12 types of electrodes to allow correlation with various bench tests using a capacitor discharge at 10, 200, or 1000 V. Current overloads absorbed by the electrodes under worst conditions in animal tests were in the range of 2 percent of the defibrillation current flowing through the chest. These overloads were absorbed by most Ag-AgCl electrodes without excessive polarization. However, stainless steel, brass, and tin electrodes tended to polarize to levels that would saturate many ECG monitors. A standard bench test using a 200-V 10-muF capacitor was recommended for inclusion in the AAMI standard to determine whether electrodes are acceptable for use during defibrillation.