Model of chromosome motility in Drosophila embryos: adaptation of a general mechanism for rapid mitosis.

During mitosis, ensembles of dynamic MTs and motors exert forces that coordinate chromosome segregation. Typically, chromosomes align at the metaphase spindle equator where they oscillate along the pole-pole axis before disjoining and moving poleward during anaphase A, but spindles in different cell types display differences in MT dynamicity, in the amplitude of chromosome oscillations and in rates of chromatid-to-pole motion. Drosophila embryonic mitotic spindles, for example, display remarkably dynamic MTs, barely detectable metaphase chromosome oscillations, and a rapid rate of "flux-pacman-dependent" anaphase chromatid-to-pole motility. Here we develop a force-balance model that describes Drosophila embryo chromosome motility in terms of a balance of forces acting on kinetochores and kMTs that is generated by multiple polymer ratchets and mitotic motors coupled to tension-dependent kMT dynamics. The model shows that i), multiple MTs displaying high dynamic instability can drive steady and rapid chromosome motion; ii), chromosome motility during metaphase and anaphase A can be described by a single mechanism; iii), high kinetochore dynein activity is deployed to dampen metaphase oscillations, to augment the basic flux-pacman mechanism, and to drive rapid anaphase A; iv), modulation of the MT rescue frequency by the kinetochore-associated kinesin-13 depolymerase promotes metaphase chromosome oscillations; and v), this basic mechanism can be adapted to a broad range of spindles.

Delay and failure to publish dental research.

OBJECTIVE: To investigate the incidence and time taken to full publication of abstracts presented at dental scientific meetings. DESIGN: A retrospective observational study. SETTING: All abstracts from the 1993 proceedings of the European Orthodontic Society (EOS) and European Organisation for Caries Research (ORCA) and a 10% random sample of abstracts from the International Association for Dental Research (IADR) conferences. METHODS: A cross-referenced Medline search of abstract title and authors was undertaken to determine whether abstracts had been published as full papers. Searches were censored 1 year prior to and 5 years post publication as an abstract. Publication rate was compared between abstracts presented orally and as posters. MAIN OUTCOME MEASURES: Publication as a full paper and time taken to publication. RESULTS: 546 abstracts were investigated. 252 abstracts (46.1%) were found as full reports. Median time to publication of all abstracts was 18 months (IQR 9, 30 months). 99 of the oral abstracts (57%) and 153 (41%) of the poster abstracts were published. Relative Risk Oral vs Poster=1.37 CI (1.19, 1.55). CONCLUSION: More than half of the research presented at EOS, IADR and ORCA in 1993 remained unpublished 5 years after presentation at the conference. Oral presentations were published more frequently than poster presentations.

Early spindle assembly in Drosophila embryos: role of a force balance involving cytoskeletal dynamics and nuclear mechanics.

Mitotic spindle morphogenesis depends upon the action of microtubules (MTs), motors and the cell cortex. Previously, we proposed that cortical- and MT-based motors acting alone can coordinate early spindle assembly in Drosophila embryos. Here, we tested this model using microscopy of living embryos to analyze spindle pole separation, cortical reorganization, and nuclear dynamics in interphase-prophase of cycles 11-13. We observe that actin caps remain flat as they expand and that furrows do not ingress. As centrosomes separate, they follow a linear trajectory, maintaining a constant pole-to-furrow distance while the nucleus progressively deforms along the elongating pole-pole axis. These observations are incorporated into a model in which outward forces generated by zones of active cortical dynein are balanced by inward forces produced by nuclear elasticity and during cycle 13, by Ncd, which localizes to interpolar MTs. Thus, the force-balance driving early spindle morphogenesis depends upon MT-based motors acting in concert with the cortex and nucleus.

Efficient chromosome capture requires a bias in the 'search-and-capture' process during mitotic-spindle assembly.

The mitotic spindle assembles into a bipolar, microtubule-based protein machine during prometaphase. One proposed mechanism for this process is "search-and-capture," in which dynamically unstable microtubules (MTs) search space to capture chromosomes. Although existing theoretical estimates suggest that dynamic instability is efficient enough to allow capture within characteristic mitotic timescales, they are limited in scope and do not address the capture times for realistic numbers of chromosomes. Here we used mathematical modeling to explore this issue. We show that without any bias toward the chromosomes, search-and-capture is not efficient enough to explain the typical observed duration of prometaphase. We further analyze search-and-capture in the presence of a spatial gradient of a stabilizing factor that biases MT dynamics toward the chromosomes. We show theoretically that such biased search-and-capture is efficient enough to account for chromosome capture. We also show that additional factors must contribute to accelerate the spindle assembly for cells with large nuclear volumes. We discuss the possibility that a RanGTP gradient introduces a spatial bias into microtubule dynamics and thus improves the efficiency of search-and-capture as a mechanism for spindle assembly.

Model for anaphase B: role of three mitotic motors in a switch from poleward flux to spindle elongation.

It has been proposed that the suppression of poleward flux within interpolar microtubule (ipMT) bundles of Drosophila embryonic spindles couples outward forces generated by a sliding filament mechanism to anaphase spindle elongation. Here, we (i) propose a molecular mechanism in which the bipolar kinesin KLP61F persistently slides dynamically unstable ipMTs outward, the MT depolymerase KLP10A acts at the poles to convert ipMT sliding to flux, and the chromokinesin KLP3A inhibits the depolymerase to suppress flux, thereby coupling ipMT sliding to spindle elongation; (ii) used KLP3A inhibitors to interfere with the coupling process, which revealed an inverse linear relation between the rates of flux and elongation, supporting the proposed mechanism and demonstrating that the suppression of flux controls both the rate and onset of spindle elongation; and (iii) developed a mathematical model using force balance and rate equations to describe how motors sliding the highly dynamic ipMTs apart can drive spindle elongation at a steady rate determined by the extent of suppression of flux.

Intraflagellar transport motors in Caenorhabditis elegans neurons.

IFT (intraflagellar transport) assembles and maintains sensory cilia on the dendritic endings of chemosensory neurons within the nematode Caenorhabditis elegans. During IFT, macromolecular protein complexes called IFT particles (which carry ciliary precursors) are moved from the base of the sensory cilium to its distal tip by anterograde IFT motors (kinesin-II and Osm-3 kinesin) and back to the base by retrograde IFT-dynein [Rosenbaum and Witman (2002) Nat. Rev. Mol. Cell Biol. 3, 813-825; Scholey (2003) Annu. Rev. Cell Dev. Biol. 19, 423-443; and Snell, Pan and Wang (2004) Cell 117, 693-697]. In the present study, we describe the protein machinery of IFT in C. elegans, which we have analysed using time-lapse fluorescence microscopy of green fluorescent protein-fusion proteins in concert with ciliary mutants.

Publication bias: raising awareness of a potential problem in dental research.

With the development of evidence-based dentistry it is important to consider how accurate and representative our published pool of evidence is. In this article we will describe publication bias and discuss the causes and potential effects it may have upon the pool of scientific evidence available in dentistry.

A force balance model of early spindle pole separation in Drosophila embryos.

The formation and function of the mitotic spindle depends upon force generation by multiple molecular motors and by the dynamics of microtubules, but how these force-generating mechanisms relate to one another is unclear. To address this issue we have modeled the separation of spindle poles as a function of time during the early stages of spindle morphogenesis in Drosophila embryos. We propose that the outward forces that drive the separation of the spindle poles depend upon forces exerted by cortical dynein and by microtubule polymerization, and that these forces are antagonized by a C-terminal kinesin, Ncd, which generates an inward force on the poles. We computed the sum of the forces generated by dynein, microtubule polymerization, and Ncd, as a function of the extent of spindle pole separation and solved an equation relating the rate of pole separation to the net force. As a result, we obtained graphs of the time course of spindle pole separation during interphase and prophase that display a reasonable fit to the experimental data for wild-type and motor-inhibited embryos. Among the novel contributions of the model are an explanation of pole separation after simultaneous loss of Ncd and dynein function, and the prediction of a large value for the effective centrosomal drag that is needed to fit the experimental data. The results demonstrate the utility of force balance models for explaining certain mitotic movements because they explain semiquantitatively how the force generators drive a rapid initial burst of pole separation when the net force is great, how pole separation slows down as the force decreases, and how a stable separation of the spindle poles characteristic of the prophase steady state is achieved when the force reaches zero.

Mitosis, microtubules, and the matrix.

The mechanical events of mitosis depend on the action of microtubules and mitotic motors, but whether these spindle components act alone or in concert with a spindle matrix is an important question.

Direct visualization of the movement of the monomeric axonal transport motor UNC-104 along neuronal processes in living Caenorhabditis elegans.

The formation and function of axons depends on the microtubule-based transport of cellular components from their sites of synthesis in the neuronal cell body to their sites of utilization at the axon terminus. To directly visualize this axonal transport in a living organism, we constructed transgenic lines of Caenorhabditis elegans that express green fluorescent protein fused to the monomeric synaptic vesicle transport motor, UNC-104. This UNC-104:: GFP construct rescued the Unc-104 mutant phenotype and was expressed throughout the nervous system. Using time-lapse confocal fluorescence microscopy, we were able to visualize fluorescent motor proteins moving in both directions along neuronal processes, some of which were identified definitely as axons and others as dendrites. Using kymograph analysis, we followed the movement of >900 particles. Most of them moved in one direction, but not necessarily at the same velocity. Ten percent of the observed particles reversed direction of movement during the period of observation, and 10% exhibited periods of movement interspersed with pauses. During episodes of persistent movement, particles moved at an average velocity of 1.02 microm/sec, which is close to the in vitro velocity of microtubule gliding driven by purified monomeric kinesin at high motor density. To our knowledge, this is the first direct visualization and analysis of the movement of specifically labeled microtubule motor proteins along axons in vivo.

Microtubule motors in mitosis.

The mitotic spindle uses microtubule-based motor proteins to assemble itself and to segregate sister chromatids. It is becoming clear that motors invoke several distinct mechanisms to generate the forces that drive mitosis. Moreover, in carrying out its function, the spindle appears to pass through a series of transient steady-state structures, each established by a delicate balance of forces generated by multiple complementary and antagonistic motors. Transitions from one steady state to the next can occur when a change in the activity of a subset of mitotic motors tips the balance.

Roles of two homotetrameric kinesins in sea urchin embryonic cell division.

To improve our understanding of the roles of microtubule cross-linking motors in mitosis, we analyzed two sea urchin embryonic kinesin-related proteins. It is striking to note that both of these proteins behave as homotetramers, but one behaves as a more compact molecule than the other. These observations suggest that these two presumptive motors could cross-link microtubules into bundles with different spacing. Both motors localize to mitotic spindles, and antibody microinjection experiments suggest that they have mitotic functions. Thus, one of these kinesin-related proteins may cross-link spindle microtubules into loose bundles that are "tightened" by the other.

A kinesin-related protein, KRP(180), positions prometaphase spindle poles during early sea urchin embryonic cell division.

We have investigated the intracellular roles of an Xklp2-related kinesin motor, KRP(180), in positioning spindle poles during early sea urchin embryonic cell division using quantitative, real-time analysis. Immunolocalization reveals that KRP(180) concentrates on microtubules in the central spindle, but is absent from centrosomes. Microinjection of inhibitory antibodies and dominant negative constructs suggest that KRP(180) is not required for the initial separation of spindle poles, but instead functions to transiently position spindle poles specifically during prometaphase.

Roles of motor proteins in building microtubule-based structures: a basic principle of cellular design.

Eukaryotic cells must build a complex infrastructure of microtubules (MTs) and associated proteins to carry out a variety of functions. A growing body of evidence indicates that a major function of MT-associated motor proteins is to assemble and maintain this infrastructure. In this context, we examine the mechanisms utilized by motors to construct the arrays of MTs and associated proteins contained within the mitotic spindle, neuronal processes, and ciliary axonemes. We focus on the capacity of motors to drive the 'sliding filament mechanism' that is involved in the construction and maintenance of spindles, axons and dendrites, and on a type of particle transport called 'intraflagellar transport' which contributes to the assembly and maintenance of axonemes.

Functional coordination of three mitotic motors in Drosophila embryos.

It is well established that multiple microtubule-based motors contribute to the formation and function of the mitotic spindle, but how the activities of these motors interrelate remains unclear. Here we visualize spindle formation in living Drosophila embryos to show that spindle pole movements are directed by a temporally coordinated balance of forces generated by three mitotic motors, cytoplasmic dynein, KLP61F, and Ncd. Specifically, our findings suggest that dynein acts to move the poles apart throughout mitosis and that this activity is augmented by KLP61F after the fenestration of the nuclear envelope, a process analogous to nuclear envelope breakdown, which occurs at the onset of prometaphase. Conversely, we find that Ncd generates forces that pull the poles together between interphase and metaphase, antagonizing the activity of both dynein and KLP61F and serving as a brake for spindle assembly. During anaphase, however, Ncd appears to have no effect on spindle pole movements, suggesting that its activity is down-regulated at this time, allowing dynein and KLP61F to drive spindle elongation during anaphase B.

Cytoplasmic dynein is required for poleward chromosome movement during mitosis in Drosophila embryos.

The movement of chromosomes during mitosis occurs on a bipolar, microtubule-based protein machine, the mitotic spindle. It has long been proposed that poleward chromosome movements that occur during prometaphase and anaphase A are driven by the microtubule motor cytoplasmic dynein, which binds to kinetochores and transports them toward the minus ends of spindle microtubules. Here we evaluate this hypothesis using time-lapse confocal microscopy to visualize, in real time, kinetochore and chromatid movements in living Drosophila embryos in the presence and absence of specific inhibitors of cytoplasmic dynein. Our results show that dynein inhibitors disrupt the alignment of kinetochores on the metaphase spindle equator and also interfere with kinetochore- and chromatid-to-pole movements during anaphase A. Thus, dynein is essential for poleward chromosome motility throughout mitosis in Drosophila embryos.

Analysis of the roles of kinesin and dynein motors in microtubule-based transport in the Caenorhabditis elegans nervous system.

The heteromeric kinesins constitute a subfamily of kinesin-related motor complexes that function in several distinct intracellular transport events. The founding member of this subfamily, heterotrimeric kinesin II, has been purified and characterized from early sea urchin embryos, where it was shown using antibody perturbation to be required for the synthesis of motile cilia, presumably by driving the anterograde transport of raft complexes. To further characterize heteromeric kinesin transport pathways, and to attempt to identify cargo molecules, we are using the model organism Caenorhabditis elegans to exploit its well-characterized nervous system and simple genetics. Here we describe methods for large-scale nematode growth and partial purification of kinesin-related holoenzymes from C. elegans, and an in vivo transport assay that allows the direct labeling and visualization of motor complexes and putative cargo molecules moving in living C. elegans neurons. This transport assay is being used to characterize the in vivo transport properties of motor enzymes in living cells, and to exploit a number of existing mutations in C. elegans that may represent constituents of heteromeric kinesin-driven transport pathways, for example, the retrograde intraflagellar transport motor CHE-3 dynein, as well as cargo molecules and/or regulatory molecules.

Microtubule-based transport along axons, dendrites and axonemes.

MTs in cytoplasmic extensions including axons, dendrites and axonemes serve as polarized tracks for vectorial intracellular transport driven by MT-based motor proteins. Although axons and axonemes serve very different functions, increasing evidence suggests that the transport events, MT organization and the motors involved in their formation and function are conserved. Thus, there are obvious similarities in the mechanisms of axonal transport and IFT. The MT arrays of axons and axonemes are parallel, whereas those of dendrites are anti-parallel, but the functional significance of this difference and its consequences for mechanisms of transport along these processes are unclear. MT-based motor proteins of the dynein and kinesin superfamilies transport a variety of cargos including membrane-bound vesicles and macromolecular complexes along MTs of axons, dendrites and axonemes, and thus contribute to the formation, maintenance and function of these cytoplasmic extensions. Chemosensory neurons in the nematode C. elegans represent an appealing system for studying transport events along dendrites and axonemes that occur sequentially in a single cell.