A method to assess ecosystem services developed from soil attributes with stakeholders and data of four arable farms.

Ecosystem-service indicators and related accounting units are crucial for the development of decision frameworks for sustainable land management systems. With a management concept using ecosystem services, land-use expectations can be linked to quantifiable soil features in a defendable and transparent way. A method to define a set of site-specific ecosystem services and indication system for quantification was set-up and run. First, we interviewed a wide group of land users profiting from ecosystem services of the soil at four arable farms in the polder Hoeksche Waard (S-SE of Rotterdam, the Netherlands). Subsequently, site-specific ecosystem services were defined and weighted according to land use expectations at different spatial and temporal scales. Second, a practical set of indicators was taken from 'Best Professional Judgment' and used to quantify the performance of the ecosystem services for these four farms. The indicators were derived from biotic and abiotic soil parameters. The performance of ecosystem services was related to a reference situation (MEP: maximum ecological potential) with the same land use and soil type combination (i.e., arable fields on silt loam) taken from the database of our national soil survey. In many cases, the performance of ecosystem services was relatively poor if compared to MEP. However, the performances of natural attenuation and/or climate-related services were better. In addition, the different management of these farms (i.e. conventional, intensive and organic farming) was reflected in the performance of the ecosystem services of their soils. Third, land management measures to improve the targeted ecosystem services were incorporated in the outlined method, but not worked out with illustrative field data in this study. Together with concordant data, we show opportunities for a quantification of ecosystem services to improve land-users' awareness and to assess management sustainability.

How to calculate the spatial distribution of ecosystem services--natural attenuation as example from The Netherlands.

Maps play an important role during the entire process of spatial planning and bring ecosystem services to the attention of stakeholders' negotiation more easily. As example we show the quantification of the ecosystem service 'natural attenuation of pollutants', which is a service necessary to keep the soil clean for production of safe food and provision of drinking water, and to provide a healthy habitat for soil organisms to support other ecosystem services. A method was developed to plot the relative measure of the natural attenuation capacity of the soil in a map. Several properties of Dutch soils were related to property-specific reference values and subsequently combined into one proxy for the natural attenuation of pollutants. This method can also be used to map other ecosystem services and to ultimately integrate suites of ecosystem services in one map.

Novel polyurethanes with interconnected porous structure induce in vivo tissue remodeling and accompanied vascularization.

Tissue engineering and regenerative medicine have furnished a vast range of modalities to treat either damaged tissue or loss of soft tissue or its function. In most approaches, a temporary porous scaffold is required to support tissue regeneration. The scaffold should be designed such that the turnover synchronizes with tissue remodeling and regeneration at the implant site. Segmented polyester urethanes (PUs) used in this study were based on epsilon-caprolactone (CL) and co-monomers D,L-lactide (D,L-L) and gamma-butyrolactone (BL), and 1,4-butanediisocyanate (BDI). In vitro, the PUs were nontoxic and haemocompatible. To test in vivo biocompatibility, the PUs were further processed into porous structures and subcutaneously implanted in rats for a period up to 21 days. Tissue remodeling and scaffold turnover was associated with a mild tissue response. The tissue response was characterized by extensive vascularization through the interconnected pores, with low numbers of macrophages on the edges and stroma formation inside the pores of the implants. The tissue ingrowth appeared to be related to the extent of microphase separation of the PUs and foam morphology. By day 21, all of the PU implants were highly vascularized, confirming the pores were interconnected. Degradation of P(CL/D,L-L)-PU was observed at this time, whereas the other two PU types remained intact. The robust method reported here of manufacturing and processing, good mechanical properties, and in vivo tissue response of the porous P(CL/D,L-L)-PU and PBCL-PU makes them excellent candidates as biomaterials with an application for soft tissue remodeling, for example, for cardiovascular regeneration.

Polyurethane scaffold formation via a combination of salt leaching and thermally induced phase separation.

Porous scaffolds have been made from two polyurethanes based on thermally induced phase separation of polymer dissolved in a DMSO/water mixture in combination with salt leaching. It is possible to obtain very porous foams with a very high interconnectivity. A major advantage of this method is that variables like porosity, pore size, and interconnectivity can be independently adjusted with the absence of toxic materials in the production process. The obtained compression moduli were between 200 kPa and 1 MPa with a variation in porosity between 76 and 84%. Currently the biological and medical aspects are under evaluation.

Development of a site-specific ecological risk assessment for contaminated sites: part I. A multi-criteria based system for the selection of ecotoxicological tests and ecological observations.

A two modules Decision Support System (DSS-ERAMANIA) was developed in order to support the site-specific Ecological Risk Assessment (ERA) for contaminated sites. Within the first module, the TRIAD and the Weight of Evidence approaches were used to develop a site-specific Ecological Risk Assessment framework including three tires of investigation. Selected ecological observations and ecotoxicological tests were compared according to Multi Criteria Decision Analysis (MCDA) methods and expert judgment, and the obtained ranking was used to identify a suitable set of tests, at each investigation tier, to be applied to the examined case study. A simplified application of the proposed methodology, implemented in the Module 1 of the DSS-ERA-MANIA, is described and discussed.

Meniscal replacement in dogs. Tissue regeneration in two different materials with similar properties.

In earlier studies, meniscal replacement with a porous polymer implant led to regeneration of neo-meniscal tissue. To evaluate the influence of the chemical properties on the tissue regeneration in the implant, in the present study, the meniscus in the dog's knee was replaced with either an aromatic 4,4-diphenylmethanediisocyanate based polyesterurethane implant (Estane) (n = 6) or with an aliphatic 1,4-butanediisocyanate based polyesterurethane implant (PCLPU) (n = 6). After 6 months, the knee joints were resected and the tissue behavior in the two different prostheses was evaluated microscopically. In both prostheses, a meniscus-like distribution of the tissue phenotype was found with collagen type I in the peripheral fibrous zones and collagen type II in the central, more cartilaginous zones. The compression-stress behavior of the implant-tissue construct remained in between the stiffness of the polymer material and that of the native meniscus. The PCLPU implant seemed to provoke less synovial tissue reaction. After meniscectomy solely, in 5 out of 6 cases, a meniscus-like regenerate was formed. Furthermore, the articular cartilage degeneration after placing a PCLPU implant did also not exceed the degeneration after the Estane implant or after meniscectomy. The differences between these two implants did not seem to influence the tissue regeneration in the implant. However, PCLPU seemed to evoke less tissue reaction and, therefore, is thought to be less or even nontoxic as compared with the Estane implant. Therefore, for studies in the future, the authors prefer the PCLPU prostheses for replacement of the meniscus.

Rheological behavior of precursor PPV monolayers.

The rheological behavior of different precursor poly(p-phenylene vinylene) (prec-PPV) monolayers at the air-water interface was investigated using an interfacial stress rheometer (ISR). This device nicely reveals a transition of the precursor poly(2,5-dimethoxy-1,4 phenylene vinylene) (prec-DMePPV) monolayer from Newtonian to elastic behavior with increasing surface pressure. The transition is accompanied by an increase in the modulus. This behavior coincides with the coagulation of different 2D condensed domains as revealed by Brewster angle microscopy (BAM). However, partly converted prec-DMePPV monolayers show elastic behavior even at low surface pressures, although a sudden increase of the moduli does occur. This phenomenon is attributed to enhanced hydrophobic interactions between the conjugated moieties in the partly converted polymers. The latter also explains the stretching behavior of the partly converted prec-DMePPV upon transfer in Langmuir-Blodgett-type vertical dipping. The increase of the moduli which is observed is much more gradual in the precursor poly(2,5-dibutoxy-1,4-phenylene vinylene), prec-DBuPPV, a monolayer which is in agreement with the expected expanded state of the latter monolayer.

Design, synthesis and properties of a degradable polyurethane scaffold for meniscus regeneration.

Longitudinal lesions in menisci are among the most frequent orthopedic problems of the knee. Repair by simple techniques is only limited to the vascular part of the meniscus. For repair of the avascular part of the meniscus a scaffold, which will assist the body in the formation of new meniscus cell tissue, might be applicable. In this study a biomedical segmented polyurethane with poly(epsilon-caprolactone) as soft segment and 1,4-butanediisocyanate and 1,4-butanediol as uniform hard segments has been synthesised. The material has a micro phase separated morphology and excellent mechanical properties. A porous scaffold was prepared via a combination of liquid-liquid phase separation and salt leaching. The foams prepared combined a very high interconnectivity and porosity with the desired compression modulus. After six months of implantation in the knees of beagles full ingrowth with cells was obtained and it was found that meniscus like tissue had been formed in the scaffold. Moreover, compression behaviour appeared to be comparable to native meniscus tissue.

Effects of zinc contamination on a natural nematode community in outdoor soil mesocosms.

The effect of zinc on the indigenous nematode fauna of a sandy soil was determined in an experimentally contaminated outdoor field plot. The aims of the study were to describe and quantify the changes in density of separate nematode taxa and total nematodes, and the changes in the number of taxa, species diversity, community maturation, and species composition in response to zinc exposure with time, and to compare the observed responses with benchmark concentrations for soil as derived from the species sensitivity distribution (SSD) for zinc toxicity. Speciation of zinc in pore water was considered and CaCl2-exchangeable zinc concentrations were used as a measure of the bioavailable zinc fraction. After contamination, a reduction of total zinc and an increase of labile sorbed zinc over time occurred, concurrent with various changes in soil and biological characteristics. Data analyses on the nematode species revealed different sensitivity levels for several population and community endpoints to zinc exposure. Based on no observed effect concentration (NOEC) values, the most sensitive community-level response was obtained with principal response curve (PRC) analysis, which incorporates all density data in a single analysis. The PRC-based community NOECs were 56, 100, and 100 mg total Zn/kg dry soil after 3, 10, and 22 months of exposure, respectively. Based on 0.01 M CaCl2-exchangeable zinc, the community response appeared to increase, as NOECs were 4.9, 4.4, and 0.67 mg exchangeable Zn/kg dry weight. Total density was least sensitive, followed by diversity of taxa and the Shannon-Wiener index. NOECs for separate species covered a broad range from sensitive to tolerant species. This range of sensitivities was similar to the one found for other species groups tested in the field plot soil. A comparison was made between benchmark concentrations HC5 and HC50 derived from the general SSD of soil organisms for zinc and the nematode response data. These comparisons roughly confirm the predictions of the SSD model, that is, the community NOEC is in agreement with the benchmark that should protect the soil ecosystem's integrity, and large adverse effects were found at the benchmark derived for setting remediation urgency.

Electromechanical properties of an ultrathin layer of directionally aligned helical polypeptides.

The electromechanical properties of a monomolecular film of poly-gamma-benzyl-L-glutamate (PBLG) 15 nanometers thick grafted at the carboxyl-terminal end to a flat aluminum surface were measured. The field-induced change in film thickness, dominated by a large inverse-piezoelectric effect, demonstrates that the "grafting-from" technique forces the chains into a parallel arrangement. The mechanical plate modulus of the film as determined by electrostriction agrees with the theoretical prediction for a single PBLG molecule along the chain axis. The experiments show that ultrathin polypeptide layers with large persistent polarization can be fabricated by the grafting approach.

The possible role of metallothioneins in copper tolerance of Silene cucubalus.

Growth and copper-binding of a copper-tolerant and a copper-sensitive population of Silene cucubalus (L.) Wib. have been studied. The copper-tolerant plants showed a much lower uptake and a proportionally higher transport of copper from root to shoot. A copper-binding protein with an apparent Mr of 8500 resembling metallothionein has been isolated from the roots of copper-treated plants of the tolerant population. After 20 d, the protein was observed to be inducible upon copper supply in the copper-tolerant plants, but not yet in the sensitive ones. This could be an indication of a difference in metalregulated synthesis of the protein. Ion-exchange chromatography of the 8500 protein yielded a major copper-containing fraction eluting at high ionic strength. Other characteristics such as UV absorption and amino-acid composition resembled strongly those of metallothioneins. The involvement of metallothioneins in the detoxification of copper within Cu-tolerant plants is discussed in relation to other mechanisms.