Automated patch-clamp technique: increased throughput in functional characterization and in pharmacological screening of small-conductance Ca2+ release-activated Ca2+ channels.

The suitability of an automated patch clamp for the characterization and pharmacological screening of calcium release-activated calcium (CRAC) channels endogenously expressed in RBL-2H3 cells was explored with the QPatch system. CRAC currents (I( CRAC)) are small, and thus precise recordings require high signal-to-noise ratios obtained by high seal resistances. Automated whole-cell establishment resulted in membrane resistances of 1728 +/- 226 MOmega (n = 44). CRAC channels were activated by a number of methods that raise intracellular calcium concentration, including EGTA, ionomycin, Ins(1,4,5)P3, and thapsigargin. I(CRAC) whole-cell currents ranged from 30 to 120 pA with rise times of 40 to 150 s. An initial delay in current activation was observed in particular when I(CRAC) was activated by passive store depletion using EGTA. Apparent rundown of I(CRAC) was commonly observed, and the current could be reactivated by subsequent addition of thapsigargin. I(CRAC) was blocked by SKF-96365 and 2-APB with IC50 values of 4.7 +/- 1.1 microM (n = 9) and 7.5 +/- 0.7 (n = 9) microM, respectively. The potencies of these blockers were similar to values reported for I(CRAC) in similar conventional patch-clamp experiments. The study demonstrates that CRAC channels can be rapidly and efficiently targeted with automated patch-clamp techniques for characterization of physiological and pharmacological properties.

Upscaling and automation of electrophysiology: toward high throughput screening in ion channel drug discovery.

Effective screening of large compound libraries in ion channel drug discovery requires the development of new electrophysiological techniques with substantially increased throughputs compared to the conventional patch clamp technique. Sophion Bioscience is aiming to meet this challenge by developing two lines of automated patch clamp products, a traditional pipette-based system called Apatchi-1, and a silicon chip-based system QPatch. The degree of automation spans from semi-automation (Apatchi-1) where a trained technician interacts with the system in a limited way, to a complete automation (QPatch 96) where the system works continuously and unattended until screening of a full compound library is completed. The performance of the systems range from medium to high throughputs.

Characterization of potassium channel modulators with QPatch automated patch-clamp technology: system characteristics and performance.

Planar silicon chips with 1-2-microm etched holes (average resistance: 2.04 +/- 0.02 MOmega in physiological buffer, n = 274) have been developed for patch-clamp recordings of whole-cell currents from cells in suspension. An automated 16-channel parallel screening system, QPatch 16, has been developed using this technology. A single-channel prototype of the QPatch system was used for validation of the patch-clamp chip technology. We present here data on the quality of patch-clamp recordings and from actual drug screening studies of human potassium channels expressed in cultured cell lines. Using Chinese hamster ovary (CHO) and human embryonic kidney cells (HEK), gigaseals of 4.1 +/- 0.4 GOmega (n = 146) and high-quality whole-cell current recordings were obtained from hERG and KCNQ4 potassium channels. Success rates for gigaseal recordings varied from 40 to 95%, and 67% of the whole-cell configurations lasted for >20 min. Cells were maintained in suspension up to 4 h in a cell storage facility that is integrated in the QPatch 16. No decline in patchability was observed during this time course. A series of screens was conducted with known inhibitors of the hERG and KCNQ4 potassium channels. Dose-response relationship characterizations of verapamil and rBeKm-1 blockage of hERG currents provided IC(50) values similar to values reported in the literature.

Activation of KCNQ5 channels stably expressed in HEK293 cells by BMS-204352.

The novel anti-ischemic compound, BMS-204352 ((3S)-(+)-(5-chloro-2-methoxyphenyl)-1,3-dihydro-3-fluoro-6-(trifluoromethyl)-2H-indol-2-one)), strongly activates the voltage-gated K+ channel KCNQ5 in a concentration-dependent manner with an EC50 of 2.4 microM. At 10 microM, BMS-204352 increased the steady state current at -30 mV by 12-fold, in contrast to the 2-fold increase observed for the other KCNQ channels [Schrøder et al., 2001]. Retigabine ((D-23129; N-(2-amino-4-(4-fluorobenzylamino)-phenyl) carbamic acid ethyl ester) induced a smaller, yet qualitatively similar effect on KCNQ5. Furthermore, BMS-204352 (10 microM) did not significantly shift the KCNQ5 activation curves (threshold and potential for half-activation, V1/2), as observed for the other KCNQ channels. In the presence of BMS-204352, the activation and deactivation kinetics of the KCNQ5 currents were slowed as the slow activation time constant increased up to 10-fold. The M-current blockers, linopirdine (DuP 996; 3,3-bis(4-pyridinylmethyl)-1-phenylindolin-2-one) and XE991 (10,10-bis(4-pyridinylmethyl)-9(10H)-anthracenone), inhibited the activation of the KCNQ5 channel induced by the BMS-204352. Thus, BMS-204352 appears to be an efficacious KCNQ channels activator, and the pharmacological properties of the compound on the KCNQ5 channel seems to be different from what has been obtained on the other KCNQ channels.