Controlled biocide release from hierarchically-structured biogenic silica: surface chemistry to tune release rate and responsiveness.

Biocides are essential for crop protection, packaging and several other biosystem applications. Therein, properties such as tailored and controlled release are paramount in the development of sustainable biocide delivery systems. We explore the self-similar nano-organized architecture of biogenic silica particles to achieve high biocide payload. The high surface area accessibility of the carrier allowed us to develop an efficient, low energy loading strategy, reaching significant dynamic loadings of up to 100 mg·g-1. The release rate and responsiveness were tuned by manipulating the interfaces, using either the native hydroxyl surfaces of the carrier or systems modified with amines or carboxylic acids in high density. We thoroughly evaluated the impact of the carrier-biocide interactions on the release rate as a function of pH, ionic strength and temperature. The amine and carboxyl functionalization strategy led to three-fold decrease in the release rate, while higher responsiveness against important agro-industrial variables. Key to our discoveries, nanostructuring thymol in the biogenic silica endowed systems with controlled, responsive release promoting remarkable, high and localized biocidal activity. The interfacial factors affecting related delivery were elucidated for an increased and localized biocidal activity, bringing a new light for the development of controlled release systems from porous materials.

Single-Step Exfoliation and Covalent Functionalization of MoS2 Nanosheets by an Organosulfur Reaction.

A simple approach to exfoliate and functionalize MoS2 in a single-step is described, which combines the dispersion of MoS2 in polybutadiene solution and ultrasonication processes. The great advantage of this process is that a colloidal stability of MoS2 in nonpolar solvent is achieved by chemically bonding polybutadiene on the perimeter edge sites of MoS2 sheets. In addition, elastomeric nanocomposite has been prepared with singular mechanical properties using functionalized MoS2 as nanofiller in a polybutadiene matrix with a subsequent vulcanization reaction.

Manganese chlorins immobilized on silica as oxidation reaction catalysts.

Synthetic strategies that comply with the principles of green chemistry represent a challenge: they will enable chemists to conduct reactions that maximize the yield of products with commercial interest while minimizing by-products formation. The search for catalysts that promote the selective oxidation of organic compounds under mild and environmentally friendly conditions constitutes one of the most important quests of organic chemistry. In this context, metalloporphyrins and analogues are excellent catalysts for oxidative transformations under mild conditions. In fact, their reduced derivatives chlorins are also able to catalyze organic compounds oxidation effectively, although they have been still little explored. In this study, we synthesized two chlorins through porphyrin cycloaddition reactions with 1.3-dipoles and prepared the corresponding manganese chlorins (MnCHL) using adequate manganese(II) salts. These MnCHL were posteriorly immobilized on silica by following the sol-gel process and the resulting solids were characterized by powder X-ray diffraction (PXRD), UVVIS spectroscopy, FTIR, XPS, and EDS. The catalytic activity of the immobilized MnCHL was investigated in the oxidation of cyclooctene, cyclohexene and cyclohexane and the results were compared with the ones obtained under homogeneous conditions.

Wettability effect of graphene-based surfaces on silicon carbide and their influence on hydrophobicity of nanocrystalline cerium oxide films.

We investigate the water-repellent ability of graphene-based surfaces stabilized on silicon carbide (SiC) and the nanocrystalline cerium oxide (CeO2) films electrodeposited on them. Water contact angle is revealed strongly dependent on the number of graphene monolayers on SiC, indicating partial permeability of graphene on SiC. Fluctuations in the roughness of textured surfaces as well as variations of oxygen vacancy content in CeO2 electrodeposits are determinant for the hydrophobicity of the interaction between water droplets and nanocrystalline CeO2 electrodeposits on monolayers graphene on SiC.

Photolysis of phenylalanine in the presence of oxidized carbon nanotubes.

Photolyses at 254 nm of phenylalanine (Phe) in aqueous solutions, were carried out in the presence of oxidized carbon nanotubes modified by the reaction with SO2 (mNTO). Kinetics of the photolyses were followed by UV spectrophotometry at 220 nm, and the products were characterized by HPLC, XPS, and (13)C-SSNMR. The ratio of the initial rates of photolysis in the presence and absence of mNTO, k*/ko*, showed a systematic decrease. The photolytic decay of Phe occurs with minor formation of tyrosine. The mass of nanotubes produced an exponential attenuation of the photolytic decomposition of Phe. Total carbon analyses (TCA) showed no inorganic carbon formation after the photolyses. The first-order rate constant of photofunctionalization of mNTO by the insertion of phenylalanine onto the nanotube matrix was calculated from TCA to be kin = 30.1 min(-1). Comparison of the XPS spectra of the mNTO before and after the photolysis, using the atom inventory technique, suggests the insertion of Phe along with the extrusion of a sulfide radical anion ((•)S(-)) which undergo subsequent oxidation to SO4(2-). The obtained results show the effects of mNTO on the photolysis of Phe and provide a new method of photofunctionalization of carbon materials, modified by the intermediates of the reduction of SO2, with an organic moiety.

Cell adhesion to plasma-coated PVC.

To produce environments suitable for cell culture, thin polymer films were deposited onto commercial PVC plates from radiofrequency acetylene-argon plasmas. The proportion of argon in the plasmas, P(Ar), was varied from 5.3 to 65.8%. The adhesion and growth of Vero cells on the coated surfaces were examined for different incubation times. Cytotoxicity tests were performed using spectroscopic methods. Carbon, O, and N were detected in all the samples using XPS. Roughness remained almost unchanged in the samples prepared with 5.3 and 28.9% but tended to increase for the films deposited with P(Ar) between 28.9 and 55.3%. Surface free energy increased with increasing P(Ar), except for the sample prepared at 28.9% of Ar, which presented the least reactive surface. Cells proliferated on all the samples, including the bare PVC. Independently of the deposition condition there was no evidence of cytotoxicity, indicating the viability of such coatings for designing biocompatible devices.

Selective insertion of sulfur dioxide reduction intermediates on graphene oxide.

Graphite microparticles (d50 6.20 µm) were oxidized by strong acids, and the resultant graphite oxide was thermally exfoliated to graphene oxide sheets (MPGO, C/O 1.53). Graphene oxide was treated with nonthermal plasma under a SO2 atmosphere at room temperature. The XPS spectrum showed that SO2 was inserted only as the oxidized intermediate at 168.7 eV in the S 2p region. Short thermal shocks at 600 and 400 °C, under an Ar atmosphere, produced reduced sulfur and carbon dioxide as shown by the XPS spectrum and TGA analysis coupled to FTIR. MPGO was also submitted to thermal reaction with SO2 at 630 °C, and the XPS spectrum in the S 2p region at 164.0 eV showed that this time only the nonoxidized episulfide intermediate was inserted. Plasma and thermal treatment produced a partial reduction of MPGO. The sequence of thermal reaction followed by plasma treatment inserted both sulfur intermediates. Because oxidized and nonoxidized intermediates have different reactivities, this selective insertion would allow the addition of selective types of organic fragments to the surface of graphene oxide.

Effects of reprocessing on chemical and morphological properties of guide wires used in angioplasty.

OBJECTIVE: To investigate the influence of the reprocessing technique of enzymatic bath with ultrasonic cleaning and ethylene oxide sterilization on the chemical properties and morphological structure of polymeric coatings of guide wire for regular guiding catheter. METHODS: These techniques simulated the routine of guide wire reprocessing in many hemodynamic services in Brazil and other countries. Samples from three different manufacturers were verified by scanning electron microscopy and X-ray photoelectron spectroscopy. RESULTS: A single or double sterilization of the catheters with ethylene oxide was not associated with morphological or chemical changes. However, scanning electron microscopy images showed that the washing method was associated with rough morphological changes, including superficial holes and bubbles, in addition to chemical changes of external atomic layers of polymeric coating surfaces, as detected by the X-ray photoelectron spectroscopy method, which is compatible with extended chemical changes on catheter surfaces. CONCLUSION: The reprocessing of the catheters with ethylene oxide was not associated with morphological or chemical changes, and it seemed appropriate to maintain guide wire coating integrity. However, the method combining chemical cleaning with mechanical vibration resulted in rough anatomical and chemical surface deterioration, suggesting that this reprocessing method should be discouraged.

Effects of reprocessing on chemical and morphological properties of guide wires used in angioplasty / Efeitos do reprocessamento nas propriedades químicas e morfológicas de fios-guia usados em angioplastia

OBJECTIVE: To investigate the influence of the reprocessing technique of enzymatic bath with ultrasonic cleaning and ethylene oxide sterilization on the chemical properties and morphological structure of polymeric coatings of guide wire for regular guiding catheter. METHODS: These techniques simulated the routine of guide wire reprocessing in many hemodynamic services in Brazil and other countries. Samples from three different manufacturers were verified by scanning electron microscopy and X-ray photoelectron spectroscopy. RESULTS: A single or double sterilization of the catheters with ethylene oxide was not associated with morphological or chemical changes. However, scanning electron microscopy images showed that the washing method was associated with rough morphological changes, including superficial holes and bubbles, in addition to chemical changes of external atomic layers of polymeric coating surfaces, as detected by the X-ray photoelectron spectroscopy method, which is compatible with extended chemical changes on catheter surfaces. CONCLUSION: The reprocessing of the catheters with ethylene oxide was not associated with morphological or chemical changes, and it seemed appropriate to maintain guide wire coating integrity. However, the method combining chemical cleaning with mechanical vibration resulted in rough anatomical and chemical surface deterioration, suggesting that this reprocessing method should be discouraged.

OBJETIVO: Investigar a influência das técnicas de reprocessamento de banho enzimático com limpeza ultrassônica e a esterilização com óxido de etileno nas propriedades químicas e estruturas morfológicas de revestimentos poliméricos de fios-guia usados como guias em cateteres regulares. MÉTODOS: Estas técnicas simulam a rotina de processamento de fios-guia em muitos serviços de hemodinâmica do Brasil e de outros países. Amostras de três diferentes fabricantes foram verificadas por microscopia eletrônica de varredura e espectroscopia de fotoelétrons de raios-X. RESULTADOS: Uma única ou dupla esterilização dos cateteres com óxido de etileno não foi associada a mudanças químicas ou morfológicas. Contudo, imagens de microscopia eletrônica de varredura mostraram que o método de lavagem foi associado a intensas modificações morfológicas, incluindo bolhas e buracos superficiais, assim como mudanças nas ligações químicas das camadas atômicas externas do revestimento polimérico, conforme demonstrado por resultados de espectroscopia de fotoelétrons de raios-X, compatível com extensas modificações químicas induzidas por esse processo de lavagem. CONCLUSÃO: O reprocessamento dos fios-guia de cateteres com óxido de etileno não está associado a mudanças químicas e morfológicas dos mesmos e pode ser considerado adequado para manter a integridade destes materiais. Entretanto, o método que combina lavagem química com vibração mecânica resulta em intensas deteriorações anatômicas e químicas, sugerindo que esse método de processamento deve ser desencorajado.

Structure and properties of polypyrrole/bacterial cellulose nanocomposites.

An electrically conducting composite based on bacterial cellulose (BC) and polypyrrole (PPy) was prepared through in situ oxidative polymerization of pyrrole (Py) in the presence of BC membrane using ammonium persulfate (APS), as an oxidant. The electrical conductivity, morphology, mechanical properties and thermal stability of the composites obtained using APS (BC/PPy·APS) were evaluated and compared with BC/PPy composites prepared using as oxidant agent Iron III chloride hexahydrate (FeCl3·6H2O). The morphology of the BC/PPy·APS composites is characterized by spherical conducting nanoparticles uniformly distributed on the BC nanofiber surface, while the composites produced with FeCl3·6H2O (BC/PPy·FeCl3) is composed of a continuous conducting polymer layer coating the BC-nanofibers. The electrical conductivity of BC/PPy·FeCl3 was 100-fold higher than that found for BC/PPy·APS composites. In order to understand the site-specific interaction between PPy and BC functional groups, both composites were characterized by Fourier transform infrared (attenuated total reflectance mode) spectroscopy attenuation reflectance (FTIR-ATR) and X-ray photoelectron spectrometry (XPS). The affinity between functional groups of PPy·FeCl3 and BC is higher than that found for BC/PPy·APS composite. In addition, the tensile properties were also influenced by the chemical affinity of both components in the polymer composites.

AFM characterization of spin coated carboxylated polystyrene nanospheres/xyloglucan layers on mica and silicon.

Self-assembled nano-arrays have a potential application as solid-phase diagnostics in many biomedical devices. The easiness of its production is directly connected to manufacture cost reduction. In this work, we present self-assembled structures starting from spin coated thin films of carboxylated polystyrene (PSC) and xyloglucan (XG) mixtures on both mica and silicon substrates. AFM images showed PSC nanospheres on top of a homogeneous layer of XG, for both substrates. The average nanosphere diameter fluctuated for a constant speed and it was likely to be independent of the component proportions on the mixture within a range of 30-50% (v/v) PSC. It was also observed that the largest diameters were found at the center of the sample and the smallest at the border. The detected nanospheres were also more numerous at the border. This behavior presents a similarity to spin coated colloidal dispersions. We observed that the average nanosphere diameter on mica substrates was bigger than the nanosphere diameters obtained on top of silicon substrates, under the same conditions. This result seems to be possibly connected to different mixture-surface interactions.

Electronic structure and optical properties of an alternated fluorene-benzothiadiazole copolymer: interplay between experimental and theoretical data.

The donor-acceptor copolymer containing benzothiadiazole (electron acceptor), linked to functionalized fluorene (electron donor), [poly[9,9-bis(3'-(tert-butyl propanoate))fluorene-co-4,7-(2,1,3-benzothiadiazole)] (LaPPS40), was synthesized through the Suzuki route. The polymer was characterized by scanning electron microscopy, gel permeation chromatography, NMR, thermal analysis, cyclic voltammetry, X-ray photoelectron spectroscopy, UV-vis spectrometry, and photophysical measurements. Theoretical calculations (density functional theory and semiempirical methodologies) used to simulate the geometry of some oligomers and the dipole moments of molecular orbitals involved were in excellent agreement with experimental results. Using such data, the higher energy absorption band was attributed to the π-π* (S(0) → S(4)) transition of the fluorene units and the lower lying band was attributed to the intramolecular (ICT) (S(0) → S(1)) charge transfer between acceptor (benzothiadiazole) and donor groups (fluorene) (D-A structure). The ICT character of this band was confirmed by its solvatochromic properties using solvents with different dielectric properties, and this behavior could be well described by the Lippert-Mataga equation. To explain the solvatochromic behavior, both the magnitude and orientation of the dipole moments in the electronic ground state and in the excited state were analyzed using the theoretical data. According to these data, the change in magnitude of the dipole moments was very small for both transitions but the spatial orientation changed remarkably for the lower energy band ascribed to the ICT band.

Improving the osteointegration and bone-implant interface by incorporation of bioactive particles in sol-gel coatings of stainless steel implants.

In this study, we report a hybrid organic-inorganic TEOS-MTES (tetraethylorthosilicate-methyltriethoxysilane) sol-gel-made coating as a potential solution to improve the in vivo performance of AISI 316L stainless steel, which is used as permanent bone implant material. These coatings act as barriers for ion migration, promoting the bioactivity of the implant surface. The addition of SiO(2) colloidal particles to the TEOS-MTES sol (10 or 30 mol.%) leads to thicker films and also acts as a film reinforcement. Also, the addition of bioactive glass-ceramic particles is considered responsible for enhancing osseointegration. In vitro assays for bioactivity in simulated body fluid showed the presence of crystalline hydroxyapatite (HA) crystals on the surface of the double coating with 10mol.% SiO(2) samples on stainless steel after 30 days of immersion. The HA crystal lattice parameters are slightly different from stoichiometric HA. In vivo implantation experiments were carried out in a rat model to observe the osteointegration of the coated implants. The coatings promote the development of newly formed bone in the periphery of the implant, in both the remodellation zone and the marrow zone. The quality of the newly formed bone was assessed for mechanical and structural integrity by nanoindentation and small-angle X-ray scattering experiments. The different amount of colloidal silica present in the inner layer of the coating slightly affects the material quality of the newly formed bone but the nanoindentation results reveal that the lower amount of silica in the coating leads to mechanical properties similar to cortical bone.

Dewetting pattern and stability of thin xyloglucan films adsorbed on silicon and mica.

Thin polysaccharide films prepared with xyloglucan (XG), a neutral polysaccharide extracted from the seeds of Guibourtia hymenifolia were prepared by spin-coating and drop deposition under pH3, pH5 and pH12, on silicon and mica substrates. Atomic force microscopy (AFM) images show flat nanoporous matrices with additional grain-like structures on both mica and silicon for pH 3 and pH 5. However, X-ray photoelectron spectroscopy (XPS) and Auger spectra of these adsorbed biopolymers prepared under alkaline condition (pH 12) reveal that Na(+) ions from the solution interact with the mica substrate surface and with XG forming chemical bonds. Both XPS and Auger results suggest XG depolymerisation during adsorption, caused by an alkaline ss-base catalyzed degradation mechanism, which is consistent with the more basic character of the mica surface under these conditions. Thus, the polysaccharide diffusion is inhibited during dewetting due to the surface bonding. On the other hand, the interaction of Na(+) in solution with the silicon surface is weaker, favoring its interaction with the polysaccharide, conserving the overall polymer structure of XG and allowing the biopolymer to slip and diffuse during dewetting, forming the final branched fractal structure.

Nickel nanoparticles obtained by a modified polyol process: synthesis, characterization, and magnetic properties.

The synthesis of nickel nanoparticles using poly(N-vinilpyrrolidone) (PVP) as protective agent was studied. The nanoparticles were prepared in air according to a modified polyol route, using nickel chloride as precursor and sodium borohydride as reducing agent. Samples with different nickel/PVP ratio were obtained. The X-ray diffraction and transmission electron microscopy (TEM) measurements indicate the occurrence of face-centered cubic metallic nickel nanoparticles with a medium diameter of 3.8 nm and good size dispersion. Fourier transformed infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) data show an effective interaction between the nickel nanoparticles surface and the carboxyl oxygen atoms of PVP. Magnetic measurements show single-domain nonideal superparamagnetism behavior due to dipolar magnetic coupling between particles.

Sequestered carbon on clay mineral probed by electron paramagnetic resonance and X-ray photoelectron spectroscopy.

This paper describes the interaction among soil organic matter components with kaolinite, an important clay mineral present in tropical soils, especially in Brazil. XPS data show that the soil organic matter adsorbed on kaolinite has aromatic and aliphatic structures, with phenolic and/or alcoholic functions and carbonyl carbons (CO) of amide and/or carboxylic groups. The N1s spectrum of the kaolinite shows an asymmetric peak that is assigned to amide and protonated ammines probably from humin. The interaction between them is strong enough to resist chemical oxidative or reductive attack besides loose amide functionalities. EPR data show that reductive treatment reduces some Fe3+ of the kaolinite structure, loosing organic components. A schematic representation of the reduction of structural Fe3+ in the concentrated domains and consequently increased concentration of Fe3+ ions in diluted domains of the spectrum is presented. This reinforces the hypothesis that humin is a stable carbon sink in soils when adsorbed to clays.

Grafting of phenylarsonic and 2-nitrophenol-4-arsonic acid onto disordered silica obtained by selective leaching of brucite-like sheet from chrysotile structure.

The products of reaction of natural chrysotile fibers with phenylarsonic acid or 2-nitrophenol-4-arsonic acid are described. The new grafted layered materials with basal spacing of 15.5 and 17.0 A were characterized by powder X-ray diffraction, thermal analysis, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. The experimental data are consistent with the grafting of phenylarsonate and 2-nitrophenol-4-arsonate groups onto the surface of the disordered silica, obtained by the in situ acidic leaching of the brucite-like sheets starting from the original chrysotile structure.

Covalent grafting of ethylene glycol and glycerol into brucite.

Layered brucite was synthesized at room temperature and, after characterization, was reacted in a closed flask with either ethylene glycol or glycerol. Powder X-ray diffraction patterns have shown that new compounds with interlayer expansions were obtained. New bands attributed to grafting of ethylene glycol and glycerol into the interlayer surface of brucite were detected by FTIR. XPS spectroscopy and thermal analyses (TG/DSC) have shown that nearly all of the hydroxide groups of the layers were replaced by either ethylene glycol or glycerol through Mg-O-C bonds.