Effect of Temperature and H Flux on the NH3 Synthesis via Electrochemical Hydrogen Permeation.

Invited for this month's cover is the group of Prof. Fokko M. Mulder at the Delft University of Technology. The image on the cover shows how in the NH3 synthesis via hydrogen-permeable electrode the N, H species on the catalyst surface can be controlled, using the analogy of a traffic controller. The Research Article itself is available at 10.1002/cssc.202300460.

Effect of Temperature and H Flux on the NH3 Synthesis via Electrochemical Hydrogen Permeation.

Ammonia is an indispensable commodity and a potential carbon free energy carrier. The use of H permeable electrodes to synthesize ammonia from N2 , water and electricity, provides a promising alternative to the fossil fuel based Haber-Bosch process. Here, H permeable Ni electrodes are investigated in the operating temperature range 25-120 °C, and varying the rate of electrochemical atomic hydrogen permeation. At 120 °C, a steady reaction is achieved for over 12 h with 10 times higher cumulative NH3 production and almost 40-fold increase in faradaic efficiency compared to room temperature experiments. NH3 is formed with a cell potential of 1.4 V, corresponding to a minimum electrical energy investment of 6.6 kWh kg-1 NH 3 ${{_{{\rm NH}{_{3}}}}}$ . The stable operation is attributed to a balanced control over the population of N, NHx and H species at the catalyst surface. These findings extend the understanding on the mechanisms involved in the nitrogen reduction reaction and may facilitate the development of an efficient green ammonia synthesis process.

Tuning the Properties of Thin-Film TaRu for Hydrogen-Sensing Applications.

Accurate, cost-efficient, and safe hydrogen sensors will play a key role in the future hydrogen economy. Optical hydrogen sensors based on metal hydrides are attractive owing to their small size and costs and the fact that they are intrinsically safe. These sensors rely on suitable sensing materials, of which the optical properties change when they absorb hydrogen if they are in contact with a hydrogen-containing environment. Here, we illustrate how we can use alloying to tune the properties of hydrogen-sensing materials by considering thin films consisting of tantalum doped with ruthenium. Using a combination of optical transmission measurements, ex situ and in situ X-ray diffraction, and neutron and X-ray reflectometry, we show that introducing Ru in Ta results in a solid solution of Ta and Ru up to at least 30% Ru. The alloying has two major effects: the compression of the unit cell with increasing Ru doping modifies the enthalpy of hydrogenation and thereby shifts the pressure window in which the material absorbs hydrogen to higher hydrogen concentrations, and it reduces the amount of hydrogen absorbed by the material. This allows one to tune the pressure/concentration window of the sensor and its sensitivity and makes Ta1-yRuy an ideal hysteresis-free tunable hydrogen-sensing material with a sensing range of >7 orders of magnitude in pressure. In a more general perspective, these results demonstrate that one can rationally tune the properties of metal hydride optical hydrogen-sensing layers by appropriate alloying.

Correction to "Aliovalent Calcium Doping of Yttrium Oxyhydride Thin Films and Implications for Photochromism".

[This corrects the article DOI: 10.1021/acs.jpcc.2c04456.].

Aliovalent Calcium Doping of Yttrium Oxyhydride Thin Films and Implications for Photochromism.

To develop an understanding of the photochromic effect in rare-earth metal oxyhydride thin films (REH3-2x O x , here RE = Y), we explore the aliovalent doping of the RE cation. We prepared Ca-doped yttrium oxyhydride thin films ((Ca z Y1-z )H x O y ) by reactive magnetron cosputtering with Ca doping concentrations between 0 and 36 at. %. All of the films are semiconductors with a constant optical band gap for Ca content below 15%, while the band gap expands for compositions above 15%. Ca doping affects the photochromic properties, resulting in (1) a lower photochromic contrast, likely due to a lower H- concentration, and (2) a faster bleaching speed, caused by a higher pre-exponential factor. Overall, these results point to the importance of the H- concentration for the formation of a "darkened" phase and the local rearrangement of these H- for the kinetics of the process.

Influence of Crystal Structure, Encapsulation, and Annealing on Photochromism in Nd Oxyhydride Thin Films.

Thin films of rare earth metal oxyhydrides show a photochromic effect, the precise mechanism of which is yet unknown. Here, we made thin films of NdH3-2x O x and show that we can change the band gap, crystal structure, and photochromic contrast by tuning the composition (O2-:H-) via the sputtering deposition pressure. To protect these films from rapid oxidation, we add a thin ALD coating of Al2O3, which increases the lifetime of the films from 1 day to several months. Encapsulation of the films also influences photochromic bleaching, changing the time dependency from first-order kinetics. As well, the partial annealing which occurs during the ALD process results in a dramatically slower bleaching speed, revealing the importance of defects for the reversibility (bleaching speed) of photochromism.

Suppression of the Phase Coexistence of the fcc-fct Transition in Hafnium-Hydride Thin Films.

Metal hydrides may play a paramount role in a future hydrogen economy. While most applications are based on nanostructured and confined materials, studies considering the structural response of these materials to hydrogen concentrate on bulk material. Here, using in situ in- and out-of-plane X-ray diffraction and reflectometry, we study the fcc ↔ fct transition in Hf thin films, an optical hydrogen-sensing material. We show that the confinement of Hf affects this transition: compared to bulk Hf, the transition is pushed to a higher hydrogen-to-metal ratio, the tetragonality of the fct phase is reduced, and phase coexistence is suppressed. These nanoconfinement effects ensure the hysteresis-free response of hafnium to hydrogen, enabling its remarkable performance as a hydrogen-sensing material. In a wider perspective, the results highlight the profound influences of the nanostructuring and nanoconfinement of metal hydrides on their structural response to hydrogen with a significant impact on their applicability in future devices.

Ammonia Synthesis at Ambient Conditions via Electrochemical Atomic Hydrogen Permeation.

Direct electrochemical nitrogen reduction holds the promise of enabling the production of carbon emission-free ammonia, which is an important intermediate in the fertilizer industry and a potential green energy carrier. Here we show a strategy for ambient condition ammonia synthesis using a hydrogen permeable nickel membrane/electrode that spatially separates the electrolyte and hydrogen reduction side from the dinitrogen activation and hydrogenation sites. Gaseous ammonia is produced catalytically in the absence of electrolyte via hydrogenation of adsorbed nitrogen by electrochemically permeating atomic hydrogen from water reduction. Dinitrogen activation at the polycrystalline nickel surface is confirmed with 15N2 isotope labeling experiments, and it is attributed to a Mars-van Krevelen mechanism enabled by the formation of N-vacancies upon hydrogenation of surface nitrides. We further show that gaseous hydrogen does not hydrogenate the adsorbed nitrogen, strengthening the benefit of having an atomic hydrogen permeable electrode. The proposed approach opens new directions toward green ammonia.

Hydrogenation Kinetics of Metal Hydride Catalytic Layers.

Catalyzing capping layers on metal hydrides are employed to enhance the hydrogenation kinetics of metal hydride-based systems such as hydrogen sensors. Here, we use a novel experimental method to study the hydrogenation kinetics of catalyzing capping layers composed of several alloys of Pd and Au as well as Pt, Ni, and Ru, all with and without an additional PTFE polymer protection layer and under the same set of experimental conditions. In particular, we employ a thin Ta film as an optical indicator to study the kinetics of the catalytic layers deposited on top of it and which allows one to determine the absolute hydrogenation rates. Our results demonstrate that doping Pd with Au results in significantly faster hydrogenation kinetics, with response times up to five times shorter than Pd through enhanced diffusion and a reduction in the activation energy. On the other hand, the kinetics of non-Pd-based materials turn out to be significantly slower and mainly limited by the diffusion through the capping layer itself. Surprisingly, the additional PTFE layer was only found to improve the kinetics of Pd-based capping materials and has no significant effect on the kinetics of Pt, Ni, and Ru. Taken together, the experimental results aid in rationally choosing a suitable capping material for the application of metal hydrides and other materials in a hydrogen economy. In addition, the used method can be applied to simultaneously study the hydrogenation kinetics in thin-film materials for a wide set of experimental conditions.

Nanostructural Perspective for Destabilization of Mg Hydride Using the Immiscible Transition Metal Mn.

Phase segregation in hydride-forming alloys may persist under the action of multiple hydrogenation/dehydrogenation cycles. We use this effect to destabilize metal hydrides in the immiscible Mg-Mn system. Here, in the MgxMn1-x thin films, the Mg and Mn domains are chemically segregated at the nanoscale. In Mn-rich compositions, the desorption pressure of hydrogen from MgH2 is elevated at a given temperature, indicating a thermodynamic destabilization. The increase in the desorption pressure of hydrogen reaches ∼2.5 orders in magnitude for x = 0.30 at moderate temperatures. Such large thermodynamic destabilization allows the MgH2 to reversibly absorb and desorb hydrogen even at room temperature. Our strategy to use immiscible elements for destabilization of MgH2 is effective and opens up the possibility for the development of advanced and low-cost hydrogen storage and supply systems.

Single Quality Factor for Enthalpy-Entropy Compensation, Isoequilibrium and Isokinetic Relationships.

Enthalpy-entropy compensation (EEC) is very often encountered in chemistry, biology and physics. Its origin is widely discussed since it would allow, for example, a very accurate tuning of the thermodynamic properties as a function of the reactants. However, EEC is often discarded as a statistical artefact, especially when only a limited temperature range is considered. We show that the likeliness of a statistical origin of an EEC can be established with a compensation quality factor (CQF) that depends only on the measured enthalpies and entropies and the experimental temperature range. This is directly derived from a comparison of the CQF with threshold values obtained from a large number of simulations with randomly generated Van 't Hoff plots. The value of CQF is furthermore a direct measure of the existence of a genuine isoequilibrium or isokinetic relationship.

Unveiling Nanoscale Compositional and Structural Heterogeneities of Highly Textured Mg0.7Ti0.3Hy Thin Films.

Thin films often exhibit fascinating properties, but the understanding of the underlying mechanism behind such properties is not simple. This is partially because of the limited structural information available. The hurdle in obtaining such information is especially high for textured thin films such as Mg-rich MgxTi1-x, a promising switchable smart coating material. Although these metastable thin films are seen as solid solution alloys by conventional crystallographic methods, their hydrogen-induced optical transition is hardly understood by a solid solution model. In this study, we collect atomic pair distribution function (PDF) data for a Mg0.7Ti0.3Hy thin film in situ on hydrogenation and successfully resolve TiH2 clusters of an average size of 30 Å embedded in the Mg matrix. This supports the chemically segregated model previously proposed for this system. We also observe the emergence of a previously unknown intermediate face-centered tetragonal phase during hydrogenation of the Mg matrix. This phase appears between Mg and MgH2 to reduce lattice mismatch, thereby preventing pulverization and facilitating rapid hydrogen uptake. This work may shed new light on the hydrogen-induced properties of Mg-rich MgxTi1-x thin films.

Metallurgical Synthesis of Mg2FexSi1-x Hydride: Destabilization of Mg2FeH6 Nanostructured in Templated Mg2Si.

Magnesium-based transition-metal hydrides are attractive hydrogen energy materials because of their relatively high gravimetric and volumetric hydrogen storage capacities combined with low material costs. However, most of them are too stable to release the hydrogen under moderate conditions. Here we synthesize the hydride of Mg2FexSi1-x, which consists of Mg2FeH6 and Mg2Si with the same cubic structure. For silicon-rich hydrides (x < 0.5), mostly the Mg2Si phase is observed by X-ray diffraction, and Mössbauer spectroscopy indicates the formation of an octahedral FeH6 unit. Transmission electron microscopy measurements indicate that Mg2FeH6 domains are nanometer-sized and embedded in a Mg2Si matrix. This synthesized metallographic structure leads to distortion of the Mg2FeH6 lattice, resulting in thermal destabilization. Our results indicate that nanometer-sized magnesium-based transition-metal hydrides can be formed into a matrix-forced organization induced by the hydrogenation of nonequilibrium Mg-Fe-Si composites. In this way, the thermodynamics of hydrogen absorption and desorption can be tuned, which allows for the development of lightweight and inexpensive hydrogen storage materials.

Direct Comparison of PdAu Alloy Thin Films and Nanoparticles upon Hydrogen Exposure.

Nanostructured metal hydrides are able to efficiently detect hydrogen in optical sensors. In the literature, two nanostructured systems based on metal hydrides have been proposed for this purpose each with its own detection principle: continuous sub-100 nm thin films read out via optical reflectance/transmittance changes and nanoparticle arrays for which the detection relies on localized surface plasmon resonance. Despite their apparent similarities, their optical and structural response to hydrogen has never been directly compared. In response, for the case of Pd1- yAu y ( y = 0.15-0.30) alloys, we directly compare these two systems and establish that they are distinctively different. We show that the dissimilar optical response is not caused by the different optical readout principles but results from a fundamentally different structural response to hydrogen due to the different nanostructurings. The measurements empirically suggest that these differences cannot be fully accounted by surface effects but that the nature of the film-substrate interaction plays an important role and affects both the hydrogen solubility and the metal-to-metal hydride transition. In a broader perspective, our results establish that the specifics of nanoconfinement dictate the structural properties of metal hydrides, which in turn control the properties of nanostructured devices including the sensing characteristics of optical hydrogen sensors and hydride-based active plasmonic systems.

Metal-polymer hybrid nanomaterials for plasmonic ultrafast hydrogen detection.

Hydrogen-air mixtures are highly flammable. Hydrogen sensors are therefore of paramount importance for timely leak detection during handling. However, existing solutions do not meet the stringent performance targets set by stakeholders, while deactivation due to poisoning, for example by carbon monoxide, is a widely unsolved problem. Here we present a plasmonic metal-polymer hybrid nanomaterial concept, where the polymer coating reduces the apparent activation energy for hydrogen transport into and out of the plasmonic nanoparticles, while deactivation resistance is provided via a tailored tandem polymer membrane. In concert with an optimized volume-to-surface ratio of the signal transducer uniquely offered by nanoparticles, this enables subsecond sensor response times. Simultaneously, hydrogen sorption hysteresis is suppressed, sensor limit of detection is enhanced, and sensor operation in demanding chemical environments is enabled, without signs of long-term deactivation. In a wider perspective, our work suggests strategies for next-generation optical gas sensors with functionalities optimized by hybrid material engineering.

Oxyhydride Nature of Rare-Earth-Based Photochromic Thin Films.

Thin films of rare-earth (RE)-oxygen-hydrogen compounds prepared by reactive magnetron sputtering show a unique color-neutral photochromic effect at ambient conditions. While their optical properties have been studied extensively, the understanding of the relationship between photochromism, chemical composition, and structure is limited. Here we establish a ternary RE-O-H composition-phase diagram based on chemical composition analysis by a combination of Rutherford backscattering and elastic recoil detection. The photochromic films are identified as oxyhydrides with a wide composition range described by the formula REO xH3-2 x where 0.5 ≤ x ≤ 1.5. We propose an anion-disordered structure model based on the face-centered cubic unit cell where the O2- and H- anions occupy tetrahedral and octahedral interstices. The optical band gap varies continuously with the anion ratio, demonstrating the potential of band gap tuning for reversible optical switching applications.

Elastic versus Alloying Effects in Mg-Based Hydride Films.

Magnesium thin films covered with a layer of Pd absorb hydrogen at much higher pressures than bulk Mg. Such an effect was originally explained as a consequence of elastic clamping on Mg by the capping Pd layer. An alternative interpretation later suggested that the pressure increase could originate from simple alloying between Mg and Pd. Here we resolve this controversy by measuring the hydrogenation and dehydrogenation isotherms of Mg-Pd thin film alloys over a wide range of compositions. Our results disentangle the effects of elastic clamping and alloying and highlight the role of plastic deformations.

A reliable, sensitive and fast optical fiber hydrogen sensor based on surface plasmon resonance.

We report for the first time on the experimental response of a Surface Plasmon Resonance fiber optic sensor based on wavelength modulation for hydrogen sensing. This approach of measuring the hydrogen concentration makes the sensor insensitive to intensity fluctuations. The intrinsic fiber sensor developed provides remote sensing and enables the possibility of multi-points sensing. The sensor consists of a multilayer of 35 nm Au/180 nm SiO2/Pd deposited on a step- index multimode fiber core. The sensitivity and selectivity of the sensor are optimal at a Pd thickness of 3.75 nm. The sensor is sensitive to a hydrogen concentration ranging between 0.5 and 4% H2 in Ar, with a response time less than 15 s.