Single-Spin Magnetomechanics with Levitated Micromagnets.

We demonstrate a new mechanical transduction platform for individual spin qubits. In our approach, single micromagnets are trapped using a type-II superconductor in proximity of spin qubits, enabling direct magnetic coupling between the two systems. Controlling the distance between the magnet and the superconductor during cooldown, we demonstrate three-dimensional trapping with quality factors around 1×10^{6} and kHz trapping frequencies. We further exploit the large magnetic moment to mass ratio of this mechanical oscillator to couple its motion to the spin degrees of freedom of an individual nitrogen vacancy center in diamond. Our approach provides a new path towards interfacing individual spin qubits with mechanical motion for testing quantum mechanics with mesoscopic objects, realization of quantum networks, and ultrasensitive metrology.

Phonon Networks with Silicon-Vacancy Centers in Diamond Waveguides.

We propose and analyze a novel realization of a solid-state quantum network, where separated silicon-vacancy centers are coupled via the phonon modes of a quasi-one-dimensional diamond waveguide. In our approach, quantum states encoded in long-lived electronic spin states can be converted into propagating phonon wave packets and be reabsorbed efficiently by a distant defect center. Our analysis shows that under realistic conditions, this approach enables the implementation of high-fidelity, scalable quantum communication protocols within chip-scale spin-qubit networks. Apart from quantum information processing, this setup constitutes a novel waveguide QED platform, where strong-coupling effects between solid-state defects and individual propagating phonons can be explored at the quantum level.

Scaffold-cell bone engineering in a validated preclinical animal model: precursors vs differentiated cell source.

The properties of osteoblasts (OBs) isolated from the axial skeleton (tOBs) differ from OBs of the orofacial skeleton (mOBs) due to the different embryological origins of the bones. The aim of the study was to assess and compare the regenerative potential of allogenic bone marrow-derived mesenchymal progenitor cells with allogenic tOBs and allogenic mOBs in combination with a mPCL-TCP scaffold in critical-sized segmental bone defects in sheep tibiae. After 6 months, the tibiae were explanted and underwent biomechanical testing, micro-computed tomography (microCT) and histological and immunohistochemical analyses. Allogenic MPCs demonstrated a trend towards a better outcome in biomechanical testing and the mean values of newly formed bone. Biomechanical, microCT and histological analysis showed no significant differences in the bone regeneration potential of tOBs and mOBs in our in vitro study, as well as in the bone regeneration potential of different cell types in vivo. Copyright © 2015 John Wiley & Sons, Ltd.

Is there a bone-nail specific entry point? Automated fit quantification of tibial nail designs during the insertion for six different nail entry points.

Intramedullary nailing is the standard fixation method for displaced diaphyseal fractures of tibia. Selection of the correct nail insertion point is important for axial alignment of bone fragments and to avoid iatrogenic fractures. However, the standard entry point (SEP) may not always optimise the bone-nail fit due to geometric variations of bones. This study aimed to investigate the optimal entry for a given bone-nail pair using the fit quantification software tool previously developed by the authors. The misfit was quantified for 20 bones with two nail designs (ETN and ETN-Proximal Bend) related to the SEP and 5 entry points which were 5 mm and 10 mm away from the SEP. The SEP was the optimal entry point for 50% of the bones used. For the remaining bones, the optimal entry point was located 5 mm away from the SEP, which improved the overall fit by 40% on average. However, entry points 10 mm away from the SEP doubled the misfit. The optimised bone-nail fit can be achieved through the SEP and within the range of a 5 mm radius, except posteriorly. The study results suggest that the optimal entry point should be selected by considering the fit during insertion and not only at the final position.

Assessing the bilateral geometrical differences of the tibia--are they the same?

Contralateral bones are often used in many medical applications but it is assumed that their bilateral differences are insignificant. Previous studies used a limited number of distance measurements in quantifying the corresponding differences; therefore, little is known about their bilateral 3D surface asymmetries. The aim of the study is to develop a comprehensive method to quantify geometrical asymmetries between the left and right tibia in order to provide first results on whether the contralateral tibia can be used as an equivalent reference. In this study, 3D bone models were reconstructed from CT scans of seven tibiae pairs, and 34 variables consisting of 2D and 3D measurements were measured from various anatomical regions. All 2D measurements, and lateral plateau and distal subchondral bone surface measurements showed insignificant differences (p>0.05), but the rest of the surfaces showed significant differences (p<0.05). Our results suggest that the contralateral tibia can be used as a reference especially in surgical applications such as articular reconstructions since the bilateral differences in the subchondral bone surfaces were less than 0.3mm. The method can also be potentially transferable to other relevant studies that require the accurate quantification of bone bilateral asymmetries.

Autologous vs. allogenic mesenchymal progenitor cells for the reconstruction of critical sized segmental tibial bone defects in aged sheep.

Mesenchymal progenitor cells (MPCs) represent an attractive cell population for bone tissue engineering. Their special immunological characteristics suggest that MPCs may be used in allogenic applications. The objective of this study was to compare the regenerative potential of autologous vs. allogenic MPCs in an ovine critical size segmental defect model. Ovine MPCs were isolated from bone marrow aspirates, expanded and cultured with osteogenic medium for 2weeks before implantation. Autologous and allogenic transplantation was performed using the cell-seeded scaffolds and unloaded scaffolds, while the application of autologous bone grafts served as a control group (n=6). Bone healing was assessed 12weeks after surgery by radiology, microcomputed tomography, biomechanical testing and histology. Radiology, biomechanical testing and histology revealed no significant differences in bone formation between the autologous and allogenic groups. Both cell groups showed more bone formation than the scaffold alone, whereas the biomechanical data showed no significant differences between the cell groups and the unloaded scaffolds. The results of the study suggest that scaffold-based bone tissue engineering using allogenic cells offers the potential for an off-the-shelf product. Thus the results of this study serve as an important baseline for translation of the assessed concepts into clinical applications.

A case for optimising fracture healing through inverse dynamization.

The mechanical conditions in the repair tissues are known to influence the outcome of fracture healing. These mechanical conditions are determined by the stiffness of fixation and limb loading. Experimental studies have shown that there is a range of beneficial fixation stiffness for timely healing and that fixation stiffness that is either too flexible or too stiff impairs callus healing. However, much less is known about how mechanical conditions influence the biological processes that make up the sequence of bone repair and if indeed mechanical stimulation is required at all stages of repair. Secondary bone healing occurs through a sequence of events broadly characterised by inflammation, proliferation, consolidation and remodelling. It is our hypothesis that a change in fixation stiffness from very flexible to stiff can shorten the time to healing relative to constant fixation stiffness. Flexible fixation has the benefit of promoting greater callus formation and needs to be applied during the proliferative stage of repair. The greater callus size helps to stabilize the fragments earlier allowing mineralization to occur faster. Together with stable/rigid fixation applied during the latter stage of repair to ensure mineralization of the callus. The predicted benefits of inverse dynamization are shortened healing in comparison to very flexible fixation and healing time comparable or faster than stable fixation with greater callus stiffness.

Steady-state entanglement in the nuclear spin dynamics of a double quantum dot.

We propose a scheme for the deterministic generation of steady-state entanglement between the two nuclear spin ensembles in an electrically defined double quantum dot. Because of quantum interference in the collective coupling to the electronic degrees of freedom, the nuclear system is actively driven into a two-mode squeezedlike target state. The entanglement buildup is accompanied by a self-polarization of the nuclear spins towards large Overhauser field gradients. Moreover, the feedback between the electronic and nuclear dynamics leads to multistability and criticality in the steady-state solutions.

Tooth fracture risk analysis based on a new finite element dental structure models using micro-CT data.

The finite element (FE) analysis is an effective method to study the strength and predict the fracture risk of endodontically-treated teeth. This paper presents a rapid method developed to generate a comprehensive tooth FE model using data retrieved from micro-computed tomography (µCT). With this method, the inhomogeneity of material properties of teeth was included into the model without dividing the tooth model into different regions. The material properties of the tooth were assumed to be related to the mineral density. The fracture risk at different tooth portions was assessed for root canal treatments. The micro-CT images of a tooth were processed by a Matlab software programme and the CT numbers were retrieved. The tooth contours were obtained with thresholding segmentation using Amira. The inner and outer surfaces of the tooth were imported into Solidworks and a three-dimensional (3D) tooth model was constructed. An assembly of the tooth model with the periodontal ligament (PDL) layer and surrounding bone was imported into ABAQUS. The material properties of the tooth were calculated from the retrieved CT numbers via ABAQUS user's subroutines. Three root canal geometries (original and two enlargements) were investigated. The proposed method in this study can generate detailed 3D finite element models of a tooth with different root canal enlargements and filling materials, and would be very useful for the assessment of the fracture risk at different tooth portions after root canal treatments.

Design and rationale of a Prospective, Observational European Multicenter study on the efficacy of acute surgical decompression after traumatic Spinal Cord Injury: the SCI-POEM study.

OBJECTIVES: Despite many years of research, there is currently no treatment available that results in major neurological or functional recovery after traumatic spinal cord injury (tSCI). In particular, no conclusive data related to the role of the timing of decompressive surgery, and the impact of injury severity on its benefit, have been published to date. This paper presents a protocol that was designed to examine the hypothesized association between the timing of surgical decompression and the extent of neurological recovery in tSCI patients. STUDY DESIGN: The SCI-POEM study is a Prospective, Observational European Multicenter comparative cohort study. This study compares acute (<12 h) versus non-acute (>12 h, <2 weeks) decompressive surgery in patients with a traumatic spinal column injury and concomitant spinal cord injury. The sample size calculation was based on a representative European patient cohort of 492 tSCI patients. During a 4-year period, 300 patients will need to be enrolled from 10 trauma centers across Europe. The primary endpoint is lower-extremity motor score as assessed according to the 'International standards for neurological classification of SCI' at 12 months after injury. Secondary endpoints include motor, sensory, imaging and functional outcomes at 3, 6 and 12 months after injury. CONCLUSION: In order to minimize bias and reduce the impact of confounders, special attention is paid to key methodological principles in this study protocol. A significant difference in safety and/or efficacy endpoints will provide meaningful information to clinicians, as this would confirm the hypothesis that rapid referral to and treatment in specialized centers result in important improvements in tSCI patients.

[Bone tissue engineering. Reconstruction of critical sized segmental bone defects in the ovine tibia]. / Knochen-Tissue-Engineering. Rekonstruktion segmentaler Knochendefekte kritischer Größe in der Schafstibia.

Well-established therapies for bone defects are restricted to bone grafts which face significant disadvantages (limited availability, donor site morbidity, insufficient integration). Therefore, the objective was to develop an alternative approach investigating the regenerative potential of medical grade polycaprolactone-tricalcium phosphate (mPCL-TCP) and silk-hydroxyapatite (silk-HA) scaffolds.Critical sized ovine tibial defects were created and stabilized. Defects were left untreated, reconstructed with autologous bone grafts (ABG) and mPCL-TCP or silk-HA scaffolds. Animals were observed for 12 weeks. X-ray analysis, torsion testing and quantitative computed tomography (CT) analyses were performed. Radiological analysis confirmed the critical nature of the defects. Full defect bridging occurred in the autograft and partial bridging in the mPCL-TCP group. Only little bone formation was observed with silk-HA scaffolds. Biomechanical testing revealed a higher torsional moment/stiffness (p < 0.05) and CT analysis a significantly higher amount of bone formation for the ABG group when compared to the silk-HA group. No significant difference was determined between the ABG and mPCL-TCP groups. The results of this study suggest that mPCL-TCP scaffolds combined can serve as an alternative to autologous bone grafting in long bone defect regeneration. The combination of mPCL-TCP with osteogenic cells or growth factors represents an attractive means to further enhance bone formation.

ABC transporters coordinately expressed during lignification of Arabidopsis stems include a set of ABCBs associated with auxin transport.

The primary inflorescence stem of Arabidopsis thaliana is rich in lignified cell walls, in both vascular bundles and interfascicular fibres. Previous gene expression studies demonstrated a correlation between expression of phenylpropanoid biosynthetic genes and a subset of genes encoding ATP-binding cassette (ABC) transporters, especially in the ABCB/multi-drug resistance/P-glycoprotein (ABCB/MDR/PGP) and ABCG/pleiotropic drug resistance (ABCG/PDR) subfamilies. The objective of this study was to characterize these ABC transporters in terms of their gene expression and their function in development of lignified cells. Based on in silico analyses, four ABC transporters were selected for detailed investigation: ABCB11/MDR8, ABCB14/MDR12, ABCB15/MDR13, and ABCG33/PDR5. Promoter::glucuronidase reporter assays for each gene indicated that promoters of ABCB11, ABCB14, ABCB15, and ABCG33 transporters are active in the vascular tissues of primary stem, and in some cases in interfascicular tissues as well. Homozygous T-DNA insertion mutant lines showed no apparent irregular xylem phenotype or alterations in interfascicular fibre lignification or morphology in comparison with wild type. However, in abcb14-1 mutants, stem vascular morphology was slightly disorganized, with decreased phloem area in the vascular bundle and decreased xylem vessel lumen diameter. In addition, abcb14-1 mutants showed both decreased polar auxin transport through whole stems and altered auxin distribution in the procambium. It is proposed that both ABCB14 and ABCB15 promote auxin transport since inflorescence stems in both mutants showed a reduction in polar auxin transport, which was not observed for any of the ABCG subfamily mutants tested. In the case of ABCB14, the reduction in auxin transport is correlated with a mild disruption of vascular development in the inflorescence stem.

A model for integrating clinical care and basic science research, and pitfalls of performing complex research projects for addressing a clinical challenge.

The collaboration of clinicians with basic science researchers is crucial for addressing clinically relevant research questions. In order to initiate such mutually beneficial relationships, we propose a model where early career clinicians spend a designated time embedded in established basic science research groups, in order to pursue a postgraduate qualification. During this time, clinicians become integral members of the research team, fostering long term relationships and opening up opportunities for continuing collaboration. However, for these collaborations to be successful there are pitfalls to be avoided. Limited time and funding can lead to attempts to answer clinical challenges with highly complex research projects characterised by a large number of "clinical" factors being introduced in the hope that the research outcomes will be more clinically relevant. As a result, the complexity of such studies and variability of its outcomes may lead to difficulties in drawing scientifically justified and clinically useful conclusions. Consequently, we stress that it is the basic science researcher and the clinician's obligation to be mindful of the limitations and challenges of such multi-factorial research projects. A systematic step-by-step approach to address clinical research questions with limited, but highly targeted and well defined research projects provides the solid foundation which may lead to the development of a longer term research program for addressing more challenging clinical problems. Ultimately, we believe that it is such models, encouraging the vital collaboration between clinicians and researchers for the work on targeted, well defined research projects, which will result in answers to the important clinical challenges of today.

Computational investigations of mechanical failures of internal plate fixation.

This paper investigated the biomechanics of two clinical cases of bone fracture treatments. Both fractures were treated with the same locking compression plate but with different numbers of screws as well as different plate materials. The fracture treated with 12 screws (rigid fixation) failed at 7 weeks with the plate breaking; the fracture with six screws (flexible fixation) endured the entire healing process. It was hypothesized that the plate failure in the unsuccessful case was due to the material fatigue induced by stress concentration in the plate. As the two clinical cases had different fracture locations and different plate materials, finite element simulations were undertaken for each fractured bone fixed by both a rigid and a flexible method. This enabled comparisons to be made between the rigid and flexible fixation methods. The fatigue life was assessed for each fixation method. The results showed that the stress in the rigid fixation methods could be significantly higher than that in flexible fixation methods. The fatigue analyses showed that, with the stress level in flexible fixation (i.e. with fewer screws), the plate was able to endure 2000 days, and that the plate in rigid fixation could fail by fatigue fracture in 20 days. The paper concludes that the rigid fixation method resulted in serious stress concentrations in the plate, which induced fatigue failure. The flexible fixation gave sufficient stability and was better for fracture healing.

Quantitative fit assessment of tibial nail designs using 3D computer modelling.

Intramedullary nailing is the standard fixation method for displaced diaphyseal fractures of the tibia in adults. The bends in modern tibial nails allow for an easier insertion, enhance the 'bone-nail construct' stability, and reduce axial malalignments of the main fragments. Anecdotal clinical evidence indicates that current nail designs do not fit optimally for patients of Asian origin. The aim of this study was to develop a method to quantitatively assess the anatomical fitting of two different nail designs for Asian tibiae by utilising 3D computer modelling. We used 3D models of two different tibial nail designs (ETN (Expert Tibia Nail) and ETN-Proximal-Bend, Synthes), and 20 CT-based 3D cortex models of Japanese cadaver tibiae. With the aid of computer graphical methods, the 3D nail models were positioned inside the medullary cavity of the intact 3D tibia models. The anatomical fitting between nail and bone was assessed by the extent of the nail protrusion from the medullary cavity into the cortical bone, in a real bone this might lead to axial malalignments of the main fragments. The fitting was quantified in terms of the total surface area, and the maximum distance by which the nail was protruding into the cortex of the virtual bone model. In all 20 bone models, the total area of the nail protruding from the medullary cavity was smaller for the ETN-Proximal-Bend (average 540 mm(2)) compared to the ETN (average 1044 mm(2)). Also, the maximum distance of the nail protruding from the medullary cavity was smaller for the ETN-Proximal-Bend (average 1.2mm) compared to the ETN (average 2.7 mm). The differences were statistically significant (p<0.05) for both the total surface area and the maximum distance measurements. By utilising computer graphical methods it was possible to conduct a quantitative fit assessment of different nail designs. The ETN-Proximal-Bend shows a statistical significantly better intramedullary fit with less cortical protrusion than the original ETN. In addition to the application in implant design, the developed method could potentially be suitable for pre-operative planning enabling the surgeon to choose the most appropriate nail design for a particular patient.

A new approach for assigning bone material properties from CT images into finite element models.

Generation of subject-specific finite element (FE) models from computed tomography (CT) datasets is of significance for application of the FE analysis to bone structures. A great challenge that remains is the automatic assignment of bone material properties from CT Hounsfield Units into finite element models. This paper proposes a new assignment approach, in which material properties are directly assigned to each integration point. Instead of modifying the dataset of FE models, the proposed approach divides the assignment procedure into two steps: generating the data file of the image intensity of a bone in a MATLAB program and reading the file into ABAQUS via user subroutines. Its accuracy has been validated by assigning the density of a bone phantom into a FE model. The proposed approach has been applied to the FE model of a sheep tibia and its applicability tested on a variety of element types. The proposed assignment approach is simple and illustrative. It can be easily modified to fit users' situations.

Current concepts in tibial plateau fractures.

Tibial plateau fractures can range from a simple lateral split pattern to very complex bicondylar injuries that can be a sour- ce of great disability. these fractures can provide a challenge for both junior as well as for senior surgeons alike. careful evaluation of the mechanism of injury and fracture pattern plays a crucial part in the operative planning. Assessment of the soft tissues should be performed carefully and adequate imaging is mandatory to allow a more detailed evaluation of the fracture architecture and pre-operativeplanning. Timely accurate reduction and fixation is the goal. Over the last decade the surgical approach chosen has been largely determined by the fracture pattern. Internal plate osteosynthesis through antero-lateral and postero-medial incisions is the most commonly utilised technique for complex bi-condylar fractures. An early range of motion with special attention to full knee extension is essential for a successful functional outcome. Application of the principles mentioned is a pre-requisite to achieve the best result. New fixation techniques, such as locking plates, have not changed those principles but helped to apply them more reliably.

Simulation of the nutrient supply in fracture healing.

The healing process for bone fractures is sensitive to mechanical stability and blood supply at the fracture site. Most currently available mechanobiological algorithms of bone healing are based solely on mechanical stimuli, while the explicit analysis of revascularization and its influences on the healing process have not been thoroughly investigated in the literature. In this paper, revascularization was described by two separate processes: angiogenesis and nutrition supply. The mathematical models for angiogenesis and nutrition supply have been proposed and integrated into an existing fuzzy algorithm of fracture healing. The computational algorithm of fracture healing, consisting of stress analysis, analyses of angiogenesis and nutrient supply, and tissue differentiation, has been tested on and compared with animal experimental results published previously. The simulation results showed that, for a small and medium-sized fracture gap, the nutrient supply is sufficient for bone healing, for a large fracture gap, non-union may be induced either by deficient nutrient supply or inadequate mechanical conditions. The comparisons with experimental results demonstrated that the improved computational algorithm is able to simulate a broad spectrum of fracture healing cases and to predict and explain delayed unions and non-union induced by large gap sizes and different mechanical conditions. The new algorithm will allow the simulation of more realistic clinical fracture healing cases with various fracture gaps and geometries and may be helpful to optimise implants and methods for fracture fixation.

Three different types of surgeon-specific stress reactions identified by laparoscopic simulation in a virtual scenario.

BACKGROUND: Minimally invasive surgery causes higher mental strain for surgeons than conventional surgery and is significantly more stressful in consecutive cases. This study aimed to investigate whether individual stress responses are associated with intraoperative alterations of manual surgical skills and technical errors of the laparoscopic surgeon. METHODS: The LapSim virtual reality simulator was used. Stress measurement was carried out for 18 surgeons performing a virtual cholecystectomy using the LapSim simulator in the context of the patient simulator provided by the METI Corporation. In the course of the study, the surgeons were exposed to different external stressors (S1-S4) in defined intervals. The activity of the sympathetic nervous system was evaluated by skin resistance with the help of a sympathicograph. RESULTS: Three different surgeon-specific stress reactions (SSR) could be identified. The first, SSR-1, with significant stress reactions during the study without recovery, showed larger laparoscopic extensions of movement but fewer intraoperative complications than SSR-2 (recovery after the stress reactions) or SSR-3 (without significant stress reactions). CONCLUSIONS: The mental load of the laparoscopic surgeon might be highly optimized by continuous activity of the sympathetic nervous system. The question of what extent or quality of stress produces adverse effects remains unclear.