Mass spectrometric identification of a novel phosphorylation site in subunit NDUFA10 of bovine mitochondrial complex I.

Mitochondrial Complex I (NADH:ubiquinone oxidoreductase) consists of at least 46 subunits. Phosphorylation of the 42-kDa subunit NDUFA10 was recently reported using a novel phosphoprotein stain [Schulenberg et al. (2003) Analysis of steady-state protein phosphorylation in mitochondria using a novel fluorescent phosphosensor dye. J. Biol. Chem. 278, 27251]. Two smaller Complex I phosphoproteins, ESSS and MWFE, and their sites of modification, have since been determined [Chen et al. (2004) The phosphorylation of subunits of complex I from bovine heart mitochondria. J. Biol. Chem. 279, 26036]. Here we identify the site of phosphorylation in NDUFA10 from bovine heart mitochondria by tandem mass spectrometry. A single phosphopeptide spanning residues 47-60 was identified and confirmed by synthesis to be (47)LITVDGNICSGKpSK(60), establishing serine-59 as the site of phosphorylation.

Selective proteome-wide detection of hydrophobic integral membrane proteins using a novel fluorescence-based staining technology.

Integral proteins containing two or more alpha-helical membrane-spanning domains are underrepresented in two-dimensional gels. While sodium dodecyl sulfate (SDS)-polyacrylamide gels separate these proteins, staining profiles are usually dominated by high-abundance hydrophilic proteins in the specimen. A fluorescence-based stain is presented that selectively highlights integral proteins containing two or more alpha-helical transmembrane domains but does not detect lipoproteins or proteins with hydrophobic pockets, such as albumin. The stain detects as little as 5-10 ng of bacteriorhodopsin, a seven-helix transmembrane protein. Stained proteins are detected using a laser scanner or charge-coupled device (CCD) camera imaging system. Fluorescence intensity of stained bands is linear with protein quantity over at least two orders of magnitude. After visualizing transmembraneous proteins, the total protein profile may be revealed using a general protein stain. Analysis of the multisubunit protein F1F0 ATP synthase revealed selective staining of the a and c subunits, polypeptides known to possess 5 and 2 transmembrane domains, respectively.

Optimized conditions for diluting and reusing a fluorescent protein gel stain.

This study elucidates the optimum conditions at the minimum cost for using SYPRO Ruby protein gel stain. It deals with the effects of gel fixation and staining times, as well as dilution and reuse of SYPRO Ruby protein gel stain in one-dimensional (1-D) gels. Signal strength and dynamic range were highest in gels that were fixed thoroughly before staining, followed by overnight staining. Using the optimized protocol, dilution or reuse of the stain reduces the dynamic range and signal intensity. Sensitivity remains high if the stain is reused up to two times, but signal intensity is reduced up to 2.5-fold in twice used stain. Sensitivity also remains high if the stain is diluted 1:2 in water, but signal intensity is reduced up to 6-fold. Of the two options, reuse or dilution, reuse better retains signal intensity and dynamic range.

Characterization of dynamic and steady-state protein phosphorylation using a fluorescent phosphoprotein gel stain and mass spectrometry.

Protein phosphorylation plays a vital role in the regulation of most aspects of cellular activity, being key to propagating messages within signal transduction pathways and to modulating protein function. Pro-Q Diamond phosphoprotein gel stain is suitable for the fluorescence detection of phosphoserine-, phosphothreonine-, and phosphotyrosine-containing proteins directly in sodium dodecyl sulfate (SDS)-polyacrylamide gels. The technology is especially appropriate for profiling steady-state and dynamic phosphorylation on a proteome-wide scale, as demonstrated through detection of the native phosphorylation of cardiac mitochondrial phosphoproteins and changes in this profile arising from the activity of a protein kinase. For example, Pro-Q Diamond phosphoprotein gel stain was employed to demonstrate that among the 46 subunits of the mitochondrial respiratory chain complex, NADH:ubiquinone oxidoreductase (complex I), a 42 kDa subunit is phosphorylated in the steady-state. However, exposure of mitochondria to cAMP-dependent protein kinase increases phosphorylation of this 42 kDa subunit and results in de novo phosphorylation of an 18 kDa subunit as well. Since Pro-Q Diamond dye binds to phosphorylated residues noncovalently, the staining technology is fully compatible with modern microchemical analysis procedures, such as peptide mass profiling by matrix assisted laser desorption/ionization-time of flight (MALDI-TOF) mass spectrometry and post-source decay analysis of peptide phosphorylation.

Detection of phosphoproteins on electroblot membranes using a small-molecule organic fluorophore.

A new formulation of the small-molecule organic fluorophore, Pro-Q Diamond dye, has been developed that permits rapid and simple detection of phosphoproteins directly on polyvinylidene difluoride (PVDF) or nitrocellulose membranes (electroblots). Protein samples are first separated by electrophoresis and then electroblotted to membranes, stained and destained, in an analogous manner as typically performed with Amido Black or Ponceau S dye staining of total protein profiles. After staining, blots are imaged using any of a variety of laser-based gel scanners, xenon-arc lamp-based gel scanners or charge-coupled device (CCD) camera-based imaging devices equipped with UV trans- or epi-illumination. The uncomplicated and reliable staining protocol delivers results in as little as 1 h and the limit of detection for the stain is typically 2-4 ng of phosphoprotein with a linear dynamic range of approximately 15-fold. Compared with traditional radiolabeling and antibody-based approaches, the new method offers significant advantages, including avoidance of radioactivity, no need for expensive antibodies, no requirement for blocking unoccupied sites on the membrane with protein or detergent solutions, no sequence context-specific binding to phosphorylated amino acid residues and the ability to analyze the native, steady-state phosphorylation of proteins obtained directly from tissue specimens or body fluids. Pro-Q Diamond dye binds directly and exclusively to the phosphate moiety, allowing it to detect the broadest spectrum of phosphorylated proteins possible. The stain binds noncovalently to phosphoproteins and is thus fully compatible with matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS) or Edman sequencing. The blot stain is also compatible with standard colorimetric, fluorogenic, and chemiluminescent detection techniques employed in immunoblotting.

Combining microscale solution-phase isoelectric focusing with Multiplexed Proteomics dye staining to analyze protein post-translational modifications.

Previously, a strategy for rapidly identifying mitochondrial phosphoproteins was presented that involves prefractionating multisubunit complexes by sucrose gradient centrifugation, followed by sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis and selective staining of phosphoproteins and total protein with fluorescent dyes [1]. Though suitable for evaluating the mitochondrial proteome, which consists of numerous multisubunit complexes, the strategy is not generally applicable to other complex proteomes. We determined that prefractionating samples by solution-phase isoelectric focusing is an effective alternative to sucrose-gradient fractionation that can be applied equally well to the analysis of mitochondrial and plasma proteins. Fluorescence-based multiplexing dye technologies greatly extend the capacity of SDS-polyacrylamide gel electrophoresis with respect to the investigation of proteome-wide changes in protein expression and post-translational modification, such as phosphorylation and glycosylation [2]. Overall, the prefractionation/Multiplexed Proteomics staining technology permits rapid, higher throughput screening of specimens for the identification of potentially interesting fractions that can subsequently be evaluated more thoroughly by two-dimensional gel electrophoresis.

Global quantitative phosphoprotein analysis using Multiplexed Proteomics technology.

Systematic parallel analysis of the phosphorylation status of networks of interacting proteins involved in the regulatory circuitry of cells and tissues is certain to drive research in the post-genomics era for many years to come. Reversible protein phosphorylation plays a critical regulatory role in a multitude of cellular processes, including alterations in signal transduction pathways related to oncogene and tumor suppressor gene products in cancer. While fluorescence detection methods are likely to offer the best solution to global protein quantitation in proteomics, to date, there has been no satisfactory method for the specific and reversible fluorescent detection of gel-separated phosphoproteins from complex samples. The newly developed Pro-Q Diamond phosphoprotein dye technology is suitable for the fluorescent detection of phosphoserine-, phosphothreonine-, and phosphotyrosine-containing proteins directly in sodium dodecyl sulfate (SDS)-polyacrylamide gels and two-dimensional (2-D) gels. Additionally, the technology is appropriate for the determination of protein kinase and phosphatase substrate preference. Other macromolecules, such as DNA, RNA, and sulfated glycans, fail to be detected with Pro-Q Diamond dye. The staining procedure is rapid, simple to perform, readily reversible and fully compatible with modern microchemical analysis procedures, such as matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) mass spectrometry. Pro-Q Diamond dye technology can detect as little as 1-2 ng of beta-casein, a pentaphosphorylated protein, and 8 ng of pepsin, a monophosphorylated protein. Fluorescence signal intensity correlates with the number of phosphorylated residues on the protein. Through combination of Pro-Q Diamond phosphoprotein stain with SYPRO(R) Ruby protein gel stain, Multiplexed Proteomics technology permits quantitative, dichromatic fluorescence detection of proteins in 2-D gels. This evolving discovery platform allows the parallel determination of protein expression level changes and altered post-translational modification patterns within a single 2-D gel experiment. The linear responses of the fluorescence dyes utilized, allow rigorous quantitation of changes over an unprecedented 500-1000-fold concentration range.

An improved mechanically durable electrophoresis gel matrix that is fully compatible with fluorescence-based protein detection technologies.

Unfortunately, conventional large-format polyacrylamide gels are mechanically fragile, often tearing during the subsequent manipulations required for visualization of the proteins. This problem is compounded when large-format two-dimensional gels are subjected to multiple staining procedures in order to detect different classes of proteins, such as total protein, phosphoproteins, and glycoproteins. A mechanically durable liquid polyacrylamide-based matrix has been developed that, upon polymerization, facilitates the handling of one-dimensional and two-dimensional gels. The matrix, referred to as Rhinohide liquid acrylamide, is stable as a refrigerated solution for up to one year, and forms a polymer-reinforced polyacrylamide gel suitable for electrophoresis, upon addition of catalysts. The matrix is superior to previously reported durable gel matrices in that it does not cause distortion of high-molecular-weight bands and does not suffer from other spot morphology artifacts, such as doubling of protein spots in the molecular weight dimension. The matrix is particularly valuable for the analysis of proteins applying multiple applications of fluorescent dyes, as required with serial staining of proteins for phosphorylation, glycosylation, and total protein expression, using Pro-Q Diamond phosphoprotein stain, Pro-Q Emerald glycoprotein stain and SYPRO Ruby protein gel stain, respectively.

Mapping glycosylation changes related to cancer using the Multiplexed Proteomics technology: a protein differential display approach.

The metastatic spread of tumor cells in malignant progression is known to be a major cause of cancer mortality. Protein glycosylation is increasingly being recognized as one of the most prominent biochemical alterations associated with malignant transformation and tumorigenesis. The Multiplexed Proteomics (MP) approach is a new technology that permits quantitative, multicolor fluorescence detection of proteins in two-dimensional (2-D) gels and on Western blots. This methodology allows the parallel determination of both altered glycosylation patterns and protein expression level changes within a single 2-D gel experiment. The linear responses of the fluorescent dyes utilized allow rigorous quantitation of changes in protein expression over a broad 3-log linear dynamic range. Global analysis of changes in protein glycosylation and total protein expression is followed by dichromatic, lectin-based profiling methods for rapidly categorizing glycan branching structures. The MP approach was applied to whole tissue extracts of normal and cancerous liver, so that altered glycosylation modification patterns and protein expression levels could be determined. One prominent glycoprotein determined to be up-regulated in the tumor tissue was haptoglobin, an acute-phase response protein. The detection methodologies associated with the MP technology radically increase the information content of 2-D gel experiments. This new information greatly enhances the applicability of these experiments in addressing fundamental questions associated with proteome-wide glycosylation changes related to cancer.

Analysis of steady-state protein phosphorylation in mitochondria using a novel fluorescent phosphosensor dye.

The phosphorylation of mitochondrial proteins is pivotal to the regulation of respiratory activity in the cell and to signaling pathways leading to apoptosis, as well as for other vital mitochondrial processes. A number of protein kinases have been identified in mitochondria but the physiological substrates for many of these remain unknown or poorly understood. By necessity, most studies of mitochondrial phosphoproteins to date have been conducted using in vitro incorporation of 32P. However, proteins that are highly phosphorylated from in situ reactions are not necessarily detected by this approach. In this study, a new small molecule fluorophore has been employed to characterize steady-state levels of mitochondrial phosphoproteins. The dye is capable of sensitive detection of phosphorylated amino acid residues in proteins separated by gel electrophoresis. When the fluorescent dye is combined with a total protein stain in a sequential gel staining procedure, the phosphorylated proteins can be visualized in the same gel as the total proteins. To optimize resolution of the proteins in mitochondria, a previously described sucrose gradient fractionation method was employed prior to gel electrophoresis. Phosphorylated proteins, as defined by the fluorescence of the phosphosensor, were excised from the gels and identified by peptide mass fingerprinting. One novel and prominent phosphoprotein identified in this manner was determined to be the 42-kDa subunit of mitochondrial complex I.

Strategies and solid-phase formats for the analysis of protein and peptide phosphorylation employing a novel fluorescent phosphorylation sensor dye.

Protein kinases represent one of the largest families of regulatory enzymes, with more than 2,000 of them being encoded for by the human genome. Many cellular processes are regulated by the reversible phosphorylation of proteins and upwards of 30% of the proteins comprising the eukaryotic proteome are likely to be phosphorylated at some point during their existence. In the past, analysis of global protein phosphorylation has been accomplished through radiolabelling of samples with inorganic (32P or [gamma-32)P] ATP. The approach is limited to specimens amenable to radiolabelling and poses certain safety and disposal problems. Alternatively, immunodetection with antibodies to the common phosphoamino acids may be employed, but the antibodies are relatively expensive and exhibit limited specificity and a certain degree of cross-reactivity. Pro-Q Diamond dye is a new fluorescent phosphosensor technology suitable for the detection of phosphoserine-, phosphothreonine- and phosphotyrosine-containing proteins directly in isoelectric focusing gels, SDS-polyacrylamide gels and two-dimensional gels. Additionally, the technology is appropriate for the detection of phosphoproteins or phosphopeptides arrayed on protein chips or affixed to beads. Dye-stained proteins and peptides can be excited with a laser-based light source of 532 or 543 nm or with a xenon-arc lamp-based system equipped with appropriate band pass filters. Alternatively, ultraviolet light of about 302 nm may be employed, providing that sufficiently long exposure times are used to collect the fluorescence signal. Pro-Q Diamond dye emits maximally at approximately 580 nm. The fluorescence-based detection technology is easy to conduct, cost effective and allows rapid large-scale screening of protein and peptide phosphorylation in a variety of solid-phase assay formats.

Detection of glycoproteins in polyacrylamide gels and on electroblots using Pro-Q Emerald 488 dye, a fluorescent periodate Schiff-base stain.

Pro-Q Emerald 488 glycoprotein stain reacts with periodic acid-oxidized carbohydrate groups, generating a bright green-fluorescent signal on glycoproteins. The stain permits detection of less than 5-18 ng of glycoprotein per band, depending upon the nature and the degree of protein glycosylation, making it roughly 8-16-fold more sensitive than the standard colorimetric periodic acid-Schiff base method using acidic fuchsin dye (pararosaniline). The green-fluorescent signal from Pro-Q Emerald 488 stain may optimally be visualized using charge-coupled device/xenon arc lamp-based imaging systems or 470-488 nm laser-based gel scanners. Though glycoprotein detection may be performed on transfer membranes, direct detection in gels avoids electroblotting and the specificity of staining is better in gels. After detecting glycoproteins with Pro-Q Emerald 488 dye, total protein profiles may subsequently be detected using SYPRO Ruby protein gel stain. Using computer-assisted registration techniques, images may then be merged to generate differential display maps.

Fluorescence detection and quantitation of recombinant proteins containing oligohistidine tag sequences directly in sodium dodecyl sulfate-polyacrylamide gels.

Two fluorophore-nitrilotriacetic acid conjugates, Pro-Q Sapphire 365 and Pro-Q Sapphire 488 oligohistidine gel stains, have been developed for the fluorescence detection of fusion proteins containing oligohistidine tags directly in sodium dodecyl sulfate polyacrylamide gels, without the requirement for electroblotting, reporter enzymes or secondary detection reagents. Pro-Q Sapphire 365 oligohistidine gel stain exhibits bright-blue fluorescence (emission maximum = 450 nm) when illuminated with UV-A or UV-B light from a standard ultraviolet transilluminator. Pro-Q Sapphire 488 oligohistidine gel stain exhibits bright-green fluorescence (emission maximum = 515 nm) when illuminated with visible light from a laser-based gel scanner equipped with a 470 nm second-harmonic generation (SHG) or 488 nm argon-ion laser source. Typically, 25-65 ng of oligohistidine-tagged fusion protein in whole cell lysates is detectable using either stain. After documenting the fluorescence signal from the Pro-Q Sapphire dyes, gels may be post-stained with the red-fluorescent SYPRO Ruby protein gel stain in order to reveal the total protein pattern.

Two-dimensional gel electrophoresis; better than a poke in the ICAT?

To date, the most widely used technology for conducting proteomic studies has been two-dimensional gel electrophoresis (2DGE), but this approach does have drawbacks. Isotope-coded affinity tagging (ICAT) is starting to challenge 2DGE as a new proteomic tool for the analysis of proteins in complex biological specimens. An appraisal of these two methodologies reveals that neither ICAT nor 2DGE provide comprehensive coverage on a proteome-wide scale.

An improved formulation of SYPRO Ruby protein gel stain: comparison with the original formulation and with a ruthenium II tris (bathophenanthroline disulfonate) formulation.

SYPRO Ruby protein gel stain is compatible with a variety of imaging platforms since it absorbs maximally in the ultraviolet (280 nm) and visible (470 nm) regions of the spectrum. Dye localization is achieved by noncovalent, electrostatic and hydrophobic binding to proteins, with signal being detected at 610 nm. Since proteins are not covalently modified by the dye, compatibility with downstream proteomics techniques such as matrix-assisted laser desorption/ionisation-time of flight mass spectrometry is assured. The principal limitation of the original formulation of SYPRO Ruby protein gel stain, is that it was only compatible with a limited number of gel fixation procedures. Too aggressive a fixation protocol led to diminished signal intensity and poor detection sensitivity. This is particularly apparent when post-staining gels subjected to labeling with other fluorophores such as Schiff's base staining of glycoproteins with fluorescent hydrazides. Consequently, we have developed an improved formulation of SYPRO Ruby protein gel stain that is fully compatible with commonly implemented protein fixation procedures and is suitable for post-staining gels after detection of glycoproteins using the green fluorescent Pro-Q Emerald 300 glycoprotein stain or detection of beta-glucuronidase using the green fluorescent ELF 97 beta-D-glucuronide. The new stain formulation is brighter, making it easier to manually excise spots for peptide mass profiling. An additional benefit of the improved formulation is that it permits staining of proteins in isoelectric focusing gels, without the requirement for caustic acids.

Simultaneous red/green dual fluorescence detection on electroblots using BODIPY TR-X succinimidyl ester and ELF 39 phosphate.

A two-color fluorescence detection method is described based upon covalently coupling the succinimidyl ester of BODIPY TR-X dye to proteins immobilized on polyvinylidene difluoride membranes, followed by detection of target proteins using the fluorogenic, precipitating substrate ELF 39-phosphate in combination with alkaline phosphatase conjugated reporter molecules. This results in all proteins in the profile being visualized as fluorescent red signal while those detected specifically with the alkaline phosphatase conjugate appear as fluorescent green signal. The dichromatic detection system is broadly compatible with ultraviolet epi- or trans-illuminators combined with photographic or charge-coupled device cameras, and xenon-arc sources equipped with appropriate excitation/emission filters. The dichromatic method permits detection of low nanogram amounts of protein and allows for unambiguous identification of target proteins relative to the entire protein profile on a single electroblot, obviating the need to run replicate gels that would otherwise require visualization of total proteins by silver staining and subsequent alignment with chemiluminescent or colorimetric signals generated on electroblots. Combining the detection approach with an Alexa Fluor 350 dye conjugated monoclonal antibody permits simultaneous fluorescence detection of two antigens and the total protein profile on the same electroblot.