A combined rotating disk electrode-surface x-ray diffraction setup for surface structure characterization in electrocatalysis.

Characterizing electrode surface structures under operando conditions is essential for fully understanding structure-activity relationships in electrocatalysis. Here, we combine in a single experiment high-energy surface x-ray diffraction as a characterizing technique with a rotating disk electrode to provide steady state kinetics under electrocatalytic conditions. Using Pt(111) and Pt(100) model electrodes, we show that full crystal truncation rod measurements are readily possible up to rotation rates of 1200 rpm. Furthermore, we discuss possibilities for both potentiostatic as well as potentiodynamic measurements, demonstrating the versatility of this technique. These different modes of operation, combined with the relatively simple experimental setup, make the combined rotating disk electrode-surface x-ray diffraction experiment a powerful technique for studying surface structures under operando electrocatalytic conditions.

Model Studies on the Ozone-Mediated Synthesis of Cobalt Oxide Nanoparticles from Dicobalt Octacarbonyl in Ionic Liquids.

Low-temperature synthesis in ionic liquids (ILs) offers an efficient route for the preparation of metal oxide nanomaterials with tailor-made properties in a water-free environment. In this work, we investigated the role of 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide [C4 C1 Pyr][NTf2 ] in the synthesis of cobalt oxide nanoparticles from the molecular precursor Co2 (CO)8 with ozone. We performed a model study in ultra-clean, ultrahigh vacuum (UHV) conditions by infrared reflection absorption spectroscopy (IRAS) using Au(111) as a substrate. Exposure of the pure precursor to ozone at low temperatures results in the oxidation of the first layers, leading to the formation of a disordered Cox Oy passivation layer. Similar protection to ozone is also achieved by deposition of an IL layer onto a precursor film prior to ozone exposure. With increasing temperature, the IL gets permeable for ozone and a cobalt oxide film forms at the IL/precursor interface. We show that the interaction with the IL mediates the oxidation and leads to a more densely packed Cox Oy film compared to a direct oxidation of the precursor.

Metastability of palladium carbide nanoparticles during hydrogen release from liquid organic hydrogen carriers.

Efficient hydrogen release from liquid organic hydrogen carriers (LOHCs) requires a high level of control over the catalytic properties of supported noble metal nanoparticles. Here, the formation of carbon-containing phases under operation conditions has a direct influence on the activity and selectivity of the catalyst. We studied the formation and stability of carbide phases using well-defined Pd/α-Al2O3(0001) model catalysts during dehydrogenation of a model LOHC, methylcyclohexane, in a flow reactor by in situ high-energy grazing incidence X-ray diffraction. The phase composition of supported Pd nanoparticles was investigated as a function of particle size and reaction conditions. Under operating conditions, we detected the formation of a PdxC phase followed by its conversion to Pd6C. The dynamic stability of the Pd6C phase results from the balance between uptake and release of carbon by the supported Pd nanoparticles in combination with the thermodynamically favorable growth of carbon deposits in the form of graphene. For small Pd nanoparticles (6 nm), the Pd6C phase is dynamically stable under low flow rate of reactants. At the high reactant flow, the Pd6C phase decomposes shortly after its formation due to the growth of graphene. Structural analysis of larger Pd nanoparticles (15 nm) reveals the formation and simultaneous presence of two types of carbides, PdxC and Pd6C. Formation and decomposition of Pd6C proceeds via a PdxC phase. After an incubation period, growth of graphene triggers the decomposition of carbides. The process is accompanied by segregation of carbon from the bulk of the nanoparticles to the graphene phase. Notably, nucleation of graphene is more favorable on bigger Pd nanoparticles. Our studies demonstrate that metastability of palladium carbides associated with dynamic formation and decomposition of the Pd6C and PdxC phases is an intrinsic phenomenon in LOHC dehydrogenation on Pd-based catalysts and strongly depends on particle size and reaction conditions.

Self-Metalation of Anchored Porphyrins on Atomically Defined Cobalt Oxide Surfaces: In situ Studies by Surface Vibrational Spectroscopy.

Metalation of anchored porphyrins is essential for their functionality at hybrid interfaces. In this work, we have studied the anchoring and metalation of a functionalized porphyrin derivative, 5-(4-carboxyphenyl)-10,15,20-triphenylporphyrin (MCTPP), on an atomically-defined CoO(100) film under ultrahigh vacuum (UHV) conditions. We follow both the anchoring to the oxide surface and the self-metalation by surface Co2+ ions via infrared reflection absorption spectroscopy (IRAS). At 150 K, MCTPP multilayer films adsorb molecularly on CoO(100) without anchoring to the surface. Upon heating to 195 K, the first layer of porphyrin molecules anchors via formation of a bridging surface carboxylate. Above 460 K, the MCTPP multilayer desorbs and only the anchored monolayer resides on the surface up to temperatures of 600 K approximately. The orientation of anchored MCTPP depends on the surface coverage. At low coverage, the MCTPP adopts a nearly flat-lying geometry, whereas an upright standing film is formed near the multilayer coverage. Self-metalation of MCTPP depends critically on the surface temperature, the coverage and on the molecular orientation. At 150 K, metalation is largely suppressed, while the degree of metalation increases with increasing temperature and reaches a value of around 60 % in the first monolayer at 450 K. At lower coverage higher metalation fractions (85 % and above) are observed, similar as for increasing temperature.

Water on Oxide Surfaces: A Triaqua Surface Coordination Complex on Co3O4(111).

The interaction of water with metal oxides controls their activity and stability in heterogeneous catalysis and electrocatalysis. In this work, we combine density functional theory calculations and infrared reflection absorption spectroscopy (IRAS) to identify the structural motifs formed upon interaction of water with an atomically defined Co3O4(111) surface. Three principal structures are observed: (i) strongly bound isolated OD, (ii) extended hydrogen-bonded OD/D2O structures, and (iii) a third structure which has not been reported to our knowledge. In this structure, surface Co2+ ions bind to three D2O molecules to form an octahedrally coordinated Co2+ with a "half hydration shell". We propose that this hydration structure represents an important intermediate in reorganization and dissolution on oxide surfaces which expose highly unsaturated surface cations.

Atomically-defined model catalysts in ultrahigh vacuum and in liquid electrolytes: particle size-dependent CO adsorption on Pt nanoparticles on ordered Co3O4(111) films.

We have studied particle size effects on atomically-defined model catalysts both in ultrahigh vacuum (UHV) and under electrochemical (EC) conditions in liquid electrolytes. The model catalysts were prepared in UHV by physical vapour deposition (PVD) of Pt onto an ordered Co3O4(111) film on Ir(100), yielding nanoparticles (NPs) with an average size from 10 to 500 atoms per particle (0.8 to 3 nm). The model systems were characterized in UHV using surface science methods including scanning tunnelling microscopy (STM), before transferring them out of the UHV and into the electrolyte without contact to ambient conditions. By X-ray photoelectron spectroscopy (XPS) we show that the model surfaces are stable in the EC environment under the applied conditions (0.1 to 1 M phosphate buffer, pH 10, 0.33 to 1.03 VRHE). As a reference, we study Pt(111) under identical conditions. In UHV, we also investigated the adsorption of CO using infrared reflection absorption spectroscopy (IRRAS). Under EC conditions, we performed equivalent experiments using EC infrared reflection absorption spectroscopy (EC-IRRAS) in combination with cyclic voltammetry (CV). Characteristic differences were observed between the IR spectra under EC conditions and in UHV. Besides the red-shift induced by the interfacial electric field (Stark effect), the EC IR bands of CO on Pt(111) show a larger width (by a factor of 2) as a result of local variations in the CO environment and coupling to the electrolyte. The CO IR bands of the Pt NPs are even broader (by a factor of 5), which is attributed to local variations of the interfacial electric field at the NP surface. Further pronounced differences are observed between the spectra taken in UHV and in the electrolyte regarding the site occupation and its dependence on particle size. In UHV, adsorption at on-top sites is preferred on Pt(111) at low coverage and similar adsorption ratios of on-top and bridge-bonded CO are formed at saturation coverage. In sharp contrast, on-top adsorption of CO on Pt(111) is partially suppressed under EC conditions. This effect is attributed to the competitive adsorption of anions from the electrolyte and leads to a clear preference for bridge sites at higher potentials (>0.5 VRHE). For the Pt NPs, the situation is different and an increasing fraction of on-top CO is observed with decreasing particle size, both under EC conditions and in UHV. For the smallest particles (10-20 atoms) we do not detect any bridge-bonded CO. This change in site preference as a function of particle size is attributed to stronger on-top adsorption on low-coordinated Pt atoms of small Pt NPs. The effect leads to a clear preference for on-top adsorption in the electrolyte even at low CO coverage and over the full potential range studied.

Electrifying model catalysts for understanding electrocatalytic reactions in liquid electrolytes.

Electrocatalysis is at the heart of our future transition to a renewable energy system. Most energy storage and conversion technologies for renewables rely on electrocatalytic processes and, with increasing availability of cheap electrical energy from renewables, chemical production will witness electrification in the near future1-3. However, our fundamental understanding of electrocatalysis lags behind the field of classical heterogeneous catalysis that has been the dominating chemical technology for a long time. Here, we describe a new strategy to advance fundamental studies on electrocatalytic materials. We propose to 'electrify' complex oxide-based model catalysts made by surface science methods to explore electrocatalytic reactions in liquid electrolytes. We demonstrate the feasibility of this concept by transferring an atomically defined platinum/cobalt oxide model catalyst into the electrochemical environment while preserving its atomic surface structure. Using this approach, we explore particle size effects and identify hitherto unknown metal-support interactions that stabilize oxidized platinum at the nanoparticle interface. The metal-support interactions open a new synergistic reaction pathway that involves both metallic and oxidized platinum. Our results illustrate the potential of the concept, which makes available a systematic approach to build atomically defined model electrodes for fundamental electrocatalytic studies.

From nappe stacking to exhumation: Cretaceous tectonics in the Apuseni Mountains (Romania).

New Ar-Ar muscovite and Rb-Sr biotite age data in combination with structural analyses from the Apuseni Mountains provide new constraints on the timing and kinematics of deformation during the Cretaceous. Time-temperature paths from the structurally highest basement nappe of the Apuseni Mountains in combination with sedimentary data indicate exhumation and a position close to the surface after the Late Jurassic emplacement of the South Apuseni Ophiolites. Early Cretaceous Ar-Ar muscovite ages from structurally lower parts in the Biharia Nappe System (Dacia Mega-Unit) show cooling from medium-grade conditions. NE-SW-trending stretching lineation and associated kinematic indicators of this deformation phase (D1) are overprinted by top-NW-directed thrusting during D2. An Albian to Turonian age (110-90 Ma) is proposed for the main deformation (D2) that formed the present-day geometry of the nappe stack and led to a pervasive retrograde greenschist-facies overprint. Thermochronological and structural data from the Bihor Unit (Tisza Mega-Unit) allowed to establish E-directed differential exhumation during Early-Late Cretaceous times (D3.1). Brittle detachment faulting (D3.2) and the deposition of syn-extensional sediments indicate general uplift and partial surface exposure during the Late Cretaceous. Brittle conditions persist during the latest Cretaceous compressional overprint (D4).

2H-Tetrakis(3,5-di-tert-butyl)phenylporphyrin on a Cu(110) Surface: Room-Temperature Self-Metalation and Surface-Reconstruction-Facilitated Self-Assembly.

The adsorption behavior of 2H-tetrakis(3,5-di-tert-butyl)phenylporphyrin (2HTTBPP) on Cu(110) and Cu(110)-(2×1)O surfaces have been investigated by using variable-temperature scanning tunneling microscopy (STM) under ultrahigh vacuum conditions. On the bare Cu(110) surface, individual 2HTTBPP molecules are observed. These molecules are immobilized on the surface with a particular orientation with respect to the crystallographic directions of the Cu(110) surface and do not form supramolecular aggregates up to full monolayer coverage. In contrast, a chiral supramolecular structure is formed on the Cu(110)-(2×1)O surface, which is stabilized by van der Waals interactions between the tert-butyl groups of neighboring molecules. These findings are explained by weakened molecule-substrate interactions on the Cu(110)-(2×1)O surface relative to the bare Cu(110) surface. By comparison with the corresponding results of Cu-tetrakis(3,5-di-tert-butyl)phenylporphyrin (CuTTBPP) on Cu(110) and Cu(110)-(2×1)O surfaces, we find that the 2HTTBPP molecules can self-metalate on both surfaces with copper atoms from the substrate at room temperature (RT). The possible origins of the self-metalation reaction at RT are discussed. Finally, peculiar irreversible temperature-dependent switching of the intramolecular conformations of the investigated molecules on the Cu(110) surface was observed and interpreted.