Positive matrix factorization of seasonally resolved organic aerosol at three different central European background sites based on nuclear magnetic resonance Aerosolomics data.

Concentration data derived from 1H NMR analysis of the water-soluble organic compounds from fine aerosol (PM2.5) at three Central European background stations, Kosetice, Frýdlant (both in the Czech Republic), and Melpitz (Germany), were used for detailed source apportionment analysis. Two winter and two summer episodes (year 2021) with higher organic concentrations and similar wind directions were selected for NMR analyses. The concentration profiles of 61 water-soluble organic compounds were determined by NMR Aerosolomics and a principal component analysis (PCA) was performed on this dataset. Based on the PCA results, 23 compounds were selected for positive matrix factorization (PMF) analysis in order to identify dominant aerosol sources at rural background sites in Central Europe. Both the PCA and the subsequent PMF analyses clearly distinguished the characteristics of winter and summer aerosol particles. In summer, four factors were identified from PMF and were associated with biogenic aerosol (61-78 %), background aerosol (9-15 %), industrial biomass combustion (7-13 %), and residential heating (5-13 %). In winter, only 3 factors were identified - industrial biomass combustion (33-49 %), residential heating (37-45 %) and a background aerosol (8-30 %). The main difference was observed in the winter season with a stronger contribution of emissions from industrial biomass burning at the Czech stations Kosetice and Frýdlant (47-49 %) compared to the Melpitz station (33 %). However, in general, there were negligible differences in identified sources between stations in the given seasons, indicating a certain homogeneity in PM2.5 composition within Central Europe at least during the sampling periods.

Elevated glutathione in researchers exposed to engineered nanoparticles due to potential adaptation to oxidative stress.

Aim: To find a practical biomonitoring method for researchers exposed to nanoparticles causing oxidative stress. Methods: In a continuation of a study in 2016-2018, biological samples (plasma, urine and exhaled breath condensate [EBC]) were collected in 2019-2020 from 43 researchers (13.8 ± 3.0 years of exposure) and 45 controls. Antioxidant status was assessed using glutathione (GSH) and ferric-reducing antioxidant power, while oxidative stress was measured as thiobarbituric acid reactive substances, all using spectrophotometric methods. Researchers' personal nanoparticle exposure was monitored. Results: Plasma GSH was elevated in researchers both before and after exposure (p < 0.01); postexposure plasma GSH correlated with nanoparticle exposure, and GSH in EBC increased. Conclusion: The results suggest adaptation to chronic exposure to nanoparticles, as monitored by plasma and EBC GSH.

What is this study about? Identifying markers of oxidative stress and/or adaptation to oxidation stress could offer tools for monitoring exposure to nanoparticles in exposed researchers. In this study, we question whether these markers correlate with their personal exposure during the shift. What were the results? We found that exposure to nanoparticles correlated with the antioxidant marker glutathione, which is higher in workers who are already pre-exposed. What do the results mean? This study suggests that the researchers have adapted to nanoparticle exposure and are ready to combat oxidative stress. However, the similarity with increased markers of oxidative stress from asbestos and silica exposure, including nucleic acid oxidation, previously found in these researchers highlights the need for further research in this area to better understand and prevent potential future effects.

A year-round observation of δ13C of dicarboxylic acids and related compounds in fine aerosols: Implications from Central European background site.

Isotopic analysis of specific compounds in aerosols can be a useful tool when studying atmospheric processes. Here, we present the results of stable carbon isotope ratio (δ13C) measurements performed on a one-year set (n = 96, Sep. 2013-Aug. 2014) of dicarboxylic acids and related compounds in PM1 at a rural Central European background site, Kosetice (Czech Republic). The most 13C enriched acid was oxalic (C2, annual average = -16.6 ± 5.0‰) followed by malonic (C3, avg. = -19.9 ± 6.6‰) and succinic (C4, avg. = -21.3 ± 4.6‰) acids. Thus, δ13C values decreased with an increase in carbon numbers. Azelaic acid (C9, avg. = -27.2 ± 3.6‰) was found to be the least 13C enriched. A comparison of δ13C of dicarboxylic acids from other background sites, especially in Asia, shows similar values to those from the European site. This comparison also showed that C2 is more 13C enriched at background sites than at urban ones. In general, we did not observe significant seasonal differences in δ13C values of dicarboxylic acids at the Central European station. We observed statistically significant differences (p value < 0.05) between winter and summer δ13C values solely for C4, glyoxylic acid (ωC2), glutaric acid (C5) and suberic acid (C8). The only significant correlations between δ13C of C2 and δ13C of C3 were found in spring and summer, suggesting that the oxidation of C3 to C2 is significant in these months with a strong contribution from biogenic aerosols. The strongest season-independent annual correlation was observed in δ13C values between C2 and C4, the two dominant dicarboxylic acids. Therefore, C4 appears to be the main intermediate precursor of C2 throughout the whole year.

Different approaches to explore the impact of COVID-19 lockdowns on carbonaceous aerosols at a European rural background site.

To prevent the fast spread of COVID-19, worldwide restrictions have been put in place, leading to a reduction in emissions from most anthropogenic sources. In this study, the impact of COVID-19 lockdowns on elemental (EC) and organic (OC) carbon was explored at a European rural background site combining different approaches: - "Horizontal approach (HA)" consists of comparing concentrations of pollutants measured at 4 m a.g.l. during pre-COVID period (2017-2019) to those measured during COVID period (2020-2021); - "Vertical approach (VA)" consists of inspecting the relationship between OC and EC measured at 4 m and those on top (230 m) of a 250 m-tall tower in Czech Republic. The HA showed that the lockdowns did not systematically result in lower concentrations of both carbonaceous fractions unlike NO2 (25 to 36 % lower) and SO2 (10 to 45 % lower). EC was generally lower during the lockdowns (up to 35 %), likely attributed to the traffic restrictions whereas increased OC (up to 50 %) could be attributed to enhanced emissions from the domestic heating and biomass burning during this stay-home period, but also to the enhanced concentration of SOC (up to 98 %). EC and OC were generally higher at 4 m suggesting a greater influence of local sources near the surface. Interestingly, the VA revealed a significantly enhanced correlation between EC and OC measured at 4 m and those at 230 m (R values up to 0.88 and 0.70 during lockdown 1 and 2, respectively), suggesting a stronger influence of aged and long distance transported aerosols during the lockdowns. This study reveals that lockdowns did not necessarily affect aerosol absolute concentrations but it certainly influenced their vertical distribution. Therefore, analyzing the vertical distribution can allow a better characterization of aerosol properties and sources at rural background sites, especially during a period of significantly reduced human activities.

Hygroscopic growth and CCN activity of secondary organic aerosol produced from dark ozonolysis of γ-terpinene.

The hygroscopic growth factor (GF) and cloud condensation nuclei (CCN) activity of secondary organic aerosol (SOA) particles produced during dark ozonolysis of γ-terpinene under different reaction conditions were investigated. The SOA particles were produced in the presence or absence of cyclohexane, an OH scavenger; 1,3,5-trimethylbenzene, an anthropogenic volatile organic compound; and (NH4)2SO4 seed particles. A hygroscopicity tandem differential mobility analyzer was used to determine the GFs of the SOA particles at RHs ≤ 93%. For some experiments, a CCN counter was used for size-resolved measurement of CCN activation at supersaturation (S) in the range of 0.1 to 1%. The single hygroscopicity parameter κ was derived from both the GF and CCN measurements. Under subsaturated conditions, all the SOA (except those in the presence of the (NH4)2SO4 seeds) showed small GF values. These GFs demonstrated that SOA mass loading affected the GF. A decrease in the SOA mass loading led to increased GF and corresponding κGFvalues. However, in a supersaturation regime, the SOA mass loading and the size of the particles did not significantly alter the CCN activity of the SOA. Our CCN measurements showed higher κCCN values (κCCN = 0.20-0.24) than those observed in most monoterpene ozonolysis studies (κCCN = 0.1-0.14). This difference may have been due to the presence of the two endocyclic double bonds in the γ-terpinene structure, which may have affected the SOA chemical composition, in contrast to monoterpenes that contain an exocyclic double bond. Our comparisons of sub- and supersaturated conditions showed a larger range of κ values than other experiments. Average κCCN/κGF ratios of ~7 and 14 were obtained in the unseeded SOA experiments at low and high SOA mass loadings, respectively. The average κCCN of 0.23 indicated that the SOA produced during ozonolysis of γ-terpinene exhibited fairly high CCN activity.

Seasonal changes in stable carbon isotopic composition in the bulk aerosol and gas phases at a suburban site in Prague.

Isotope fractionation between the gas and aerosol phases is an important phenomenon for studying atmospheric processes. Here, for the first time, seasonally resolved stable carbon isotope ratio (δ13C) values are systematically used to study phase interactions in bulk aerosol and gaseous carbonaceous samples. Seasonal variations in the δ13C of total carbon (TC; δ13CTC) and water-soluble organic carbon (WSOC; δ13CWSOC) in fine aerosol particles (PM2.5) as well as in the total carbon of part of the gas phase (TCgas; δ13CTCgas) were studied at a suburban site in Prague, Czech Republic, Central Europe. Year-round samples were collected for the main and backup filters from 14 April 2016 to 1 May 2017 every 6 days with a 48 h sampling period (n = 66). During all seasons, the highest 13C enrichment was found in WSOC, followed by particulate TC, whereas the highest 13C depletion was found in gaseous TC. We observed a clear seasonal pattern for all δ13C, with the highest values in winter (avg. δ13CTC = -25.5 ± 0.8‰, δ13CWSOC = -25.0 ± 0.7‰, δ13CTCgas = -27.7 ± 0.5‰) and the lowest values in summer (avg. δ13CTC = -27.2 ± 0.5‰, δ13CWSOC = -26.4 ± 0.3‰, δ13CTCgas = -28.9 ± 0.3‰). This study supports the existence of different aerosol sources at the site during the year. Despite the different seasonal compositions of carbonaceous aerosols, the isotope difference (Δδ13C) between δ13CTC (aerosol) and δ13CTCgas (gas phase) was similar during the seasons (year avg. 1.97 ± 0.50‰). Moreover, Δδ13C between WSOC and TC in PM2.5 showed a difference between spring and winter, but in general, these values were also similar year-round (year avg. 0.71 ± 0.37‰). During the entire period, TCgas and WSOC were the most 13C-depleted and most 13C-enriched fractions, respectively, and although the resulting difference Δ(δ13CWSOC - Î´13CTCgas) was significant, it was almost invariant throughout the year (2.67 ± 0.44‰). The present study suggests that the stable carbon isotopic fractionation between the bulk aerosol and gas phases is probably not entirely dependent on the chemical composition of individual carbonaceous compounds from different sources.

Mass absorption cross-section and absorption enhancement from long term black and elemental carbon measurements: A rural background station in Central Europe.

Black carbon (BC) is a dominant aerosol light absorber, and its brown carbon (BrC) coating can enhance absorption and lead to uncertainties concerning the radiative forcing estimation. This study investigates the mass absorption cross-section of equivalent BC (MACeBC) during a long-term field measurement (2013-2017) at a rural Central European site. The MAC enhancement factor (Eabs) and the contribution of BrC coatings to the absorption coefficient (Babs) were estimated by combining different approaches. The annual mean Babs and MACeBC values decreased slightly over the measurement period associated with change in the submicron aerosol size distribution. Regardless of the wavelength, Babs exhibited clear seasonal and diurnal variations, with higher values in winter when a higher absorption Ångström exponent (1.4) was observed due to the local biomass burning (BB). In contrast, MACeBC did not have a distinct temporal trend at 600 nm (7.84 ± 2.79 m2 g-1), while it showed a seasonal trend at 370 nm with higher values in winter (15.64 ± 4.77 m2 g-1). During this season, Eabs_660 was 1.18 ± 0.27 and did not exhibit any clear wavelength dependence, despite the influence of BB. During the study period, BrC-attributed absorption was observed in 31% of the samples, with a contribution of up to 40% of total Babs. In summer, the Eabs_660 increased to 1.59 ± 0.60, when a larger BC coating could be formed by secondary aerosol fractions. During this season, MACeBC_660 and Eabs_660 showed comparable source profiles that were mainly associated with aged air masses over central Europe, thereby supporting the fact that characteristics of coating materials formed during atmospheric aging are a major factor driving the MACeBC_660 measured at the regional background site. Further field investigations of the composition of BC coatings would help to better understand and estimate uncertainties related to the radiative effect of aerosols.

Hygroscopicity of secondary marine organic aerosols: Mixtures of alkylammonium salts and inorganic components.

Field studies have identified alkylammonium salts as important components of secondary marine organic aerosols. In this work, we study the hygroscopic behavior of laboratory-generated alkylammonium aerosol particles, including monomethylammonium chloride (MMACl), dimethylammonium chloride (DMACl), trimethylammonium chloride (TMACl), diethylammonium chloride (DEACl), and their mixtures with inorganic salts containing ammonium sulfate (NH4)2SO4, sodium chloride NaCl, calcium nitrate Ca(NO3)2 and sodium sulfate Na2SO4 at different dry mass ratios with a hygroscopicity tandem differential mobility analyzer (HTDMA). The hygroscopic growth of pure alkylammonium salt particles (except for DEACl) reveals gradual water uptake over the whole studied range of relative humidities (RHs). In general, the impact of the presence of alkylammonium chloride on the phase behavior and hygroscopic growth of mixtures depends on the chemical composition of particles and volume fraction of the alkylammonium chloride in the mixtures. For alkylammonium/(NH4)2SO4 mixed particles (except for TMACl/(NH4)2SO4), the hygroscopic growth shows a smooth growth tendency when the organic content is high, while the deliquescence transition is observed for alkylammonium salt/NaCl mixtures at all mass ratios. Regarding the different mixtures of alkylammonium/Ca(NO3)2 particles, continuous water uptake without phase transition is observed over the studied RH range, indicating that alkylammonium salts impose no effect on the liquid-like state of calcium nitrate. The alkylammonium/Na2SO4 mixtures show obvious particle shrinkage prior to the deliquescence point. A similar behavior is also observed for alkylammonium salt/NaCl mixtures. The observed diameter reduction can be attributed to the transformation of porous or irregularly shaped solid particles into more compact near-spherical particles. In the following, measured growth factors (GFs) are compared with values predicted with the Zdanovskii-Stokes-Robinson (ZSR) mixing rule and ideal solution model. The ZSR predictions for different alkylammonium/inorganic mixtures are similar to the measured GFs as long as the mixed particles are in a liquid-like state.

Three-Year Study of Markers of Oxidative Stress in Exhaled Breath Condensate in Workers Producing Nanocomposites, Extended by Plasma and Urine Analysis in Last Two Years.

Human data concerning exposure to nanoparticles are very limited, and biomarkers for monitoring exposure are urgently needed. In a follow-up of a 2016 study in a nanocomposites plant, in which only exhaled breath condensate (EBC) was examined, eight markers of oxidative stress were analyzed in three bodily fluids, i.e., EBC, plasma and urine, in both pre-shift and post-shift samples in 2017 and 2018. Aerosol exposures were monitored. Mass concentration in 2017 was 0.351 mg/m3 during machining, and 0.179 and 0.217 mg/m3 during machining and welding, respectively, in 2018. In number concentrations, nanoparticles formed 96%, 90% and 59%, respectively. In both years, pre-shift elevations of 50.0% in EBC, 37.5% in plasma and 6.25% in urine biomarkers were observed. Post-shift elevation reached 62.5% in EBC, 68.8% in plasma and 18.8% in urine samples. The same trend was observed in all biological fluids. Individual factors were responsible for the elevation of control subjects' afternoon vs. morning markers in 2018; all were significantly lower compared to those of workers. Malondialdehyde levels were always acutely shifted, and 8-hydroxy-2-deoxyguanosine levels best showed chronic exposure effect. EBC and plasma analysis appear to be the ideal fluids for bio-monitoring of oxidative stress arising from engineered nanomaterials. Potential late effects need to be targeted and prevented, as there is a similarity of EBC findings in patients with silicosis and asbestosis.

Nuclear Magnetic Resonance Aerosolomics: A Tool for Analysis of Polar Compounds in Atmospheric Aerosols.

Nuclear magnetic resonance aerosolomics was proposed as a new approach to the analysis of the water-soluble organic compound fraction in aerosol particulate matter. The identification of individual compounds is based on a comparison of precise chemical shifts in the 1H NMR spectrum with the signals in the standards library. For this purpose, Chenomx metabolomics software and a comprehensive spectra library of 150 compounds known from chemistry of aerosols were used. This approach enabled the identification of 60 compounds in real aerosol samples collected at a suburban site in Prague. Using the metabolomic spectra library, three new compounds were identified in aerosols for the first time, and an association of four other compounds to the atmospheric particulate matter was confirmed. The obtained concentration profiles of all identified chemical individuals were subsequently subjected to advanced statistical analysis. NMR aerosolomics clearly differentiates between summer and winter aerosol samples via multivariate statistical analysis and revealed some interesting trends in composition, according to aerosol particle size. Furthermore, the univariate statistical analysis was applied to highlight compounds responsible for the group separation, and possible sources of these compounds were suggested.

Spatial-temporal variability of aerosol sources based on chemical composition and particle number size distributions in an urban settlement influenced by metallurgical industry.

The Moravian-Silesian region of the Czech Republic with its capital city Ostrava is a European air pollution hot spot for airborne particulate matter (PM). Therefore, the spatiotemporal variability assessment of source contributions to aerosol particles is essential for the successful abatement strategies implementation. Positive Matrix Factorization (PMF) was applied to highly-time resolved PM0.15-1.15 chemical composition (1 h resolution) and particle number size distribution (PNSD, 14 nm - 10 µm) data measured at the suburban (Ostrava-Plesná) and urban (Ostrava-Radvanice) residential receptor sites in parallel during an intensive winter campaign. Diel patterns, meteorological variables, inorganic and organic markers, and associations between the chemical composition factors and PNSD factors were used to identify the pollution sources and their origins (local, urban agglomeration and regional). The source apportionment analysis resolved six and four PM0.15-1.15 sources in Plesná and Radvanice, respectively. In Plesná, local residential combustion sources (coal and biomass combustion) followed by regional combustion sources (residential heating, metallurgical industry) were the main contributors to PM0.15-1.15. In Radvanice, local residential combustion and the metallurgical industry were the most important PM0.15-1.15 sources. Aitken and accumulation mode particles emitted by local residential combustion sources along with common urban sources (residential heating, industry and traffic) were the main contributors to the particle number concentration (PNC) in Plesná. Additionally, accumulation mode particles from local residential combustion sources and regional pollution dominated the particle volume concentration (PVC). In Radvanice, local industrial sources were the major contributors to PNC and local coal combustion was the main contributor to PVC. The source apportionment results from the complementary datasets elucidated the relevance of highly time-resolved parallel measurements at both receptor sites given the specific meteorological conditions produced by the regional orography. These results are in agreement with our previous studies conducted at this site. Graphical abstract.

DNA Methylation Profiles in a Group of Workers Occupationally Exposed to Nanoparticles.

The risk of exposure to nanoparticles (NPs) has rapidly increased during the last decade due to the vast use of nanomaterials (NMs) in many areas of human life. Despite this fact, human biomonitoring studies focused on the effect of NP exposure on DNA alterations are still rare. Furthermore, there are virtually no epigenetic data available. In this study, we investigated global and gene-specific DNA methylation profiles in a group of 20 long-term (mean 14.5 years) exposed, nanocomposite, research workers and in 20 controls. Both groups were sampled twice/day (pre-shift and post-shift) in September 2018. We applied Infinium Methylation Assay, using the Infinium MethylationEPIC BeadChips with more than 850,000 CpG loci, for identification of the DNA methylation pattern in the studied groups. Aerosol exposure monitoring, including two nanosized fractions, was also performed as proof of acute NP exposure. The obtained array data showed significant differences in methylation between the exposed and control groups related to long-term exposure, specifically 341 CpG loci were hypomethylated and 364 hypermethylated. The most significant CpG differences were mainly detected in genes involved in lipid metabolism, the immune system, lung functions, signaling pathways, cancer development and xenobiotic detoxification. In contrast, short-term acute NP exposure was not accompanied by DNA methylation changes. In summary, long-term (years) exposure to NP is associated with DNA epigenetic alterations.

Characterization of Equivalent Black Carbon at a regional background site in Central Europe: Variability and source apportionment☆.

Characterizing Black Carbon (BC) at regional background areas is important for better understanding its impact on climate forcing and health effects. The variability and sources of Equivalent Black Carbon (EBC) in PM10 (atmospheric particles with aerodynamic diameter smaller than 10 µm) have been investigated during a 5-year measurement period at the National Atmospheric Observatory Kosetice (NAOK), Czech Republic. Ground based measurements were performed from September 2012 to December 2017 with a 7-wavelength aethalometer (AE31, Magee Scientific). The contributions of fossil fuel (EBCff) and biomass burning (EBCbb) were estimated using the aethalometer model. Seasonal, diurnal and weekly variations of EBC were observed that can be related to the sources fluctuations and transport characteristic of pollutants predominantly associated with regional air masses recirculating over the Czech Republic and neighboring countries. The absorption Ångström exponent (α-value) estimated in summer (1.1 ± 0.2) was consistent with reported value for traffic, while the mean highest value (1.5 ± 0.2) was observed in winter due to increased EBCbb accounting for about 50% of the total EBC. This result is in agreement with the strong correlation between EBCbb and biomass burning tracers (levoglucosan and mannosan) in winter. During this season, the concentrations of EBCbb and Delta-C (proxy for biomass burning) reached a maximum in the evening when increasing emissions of wood burning in domestic heating devices (woodstoves/heating system) is expected, especially during the weekend. The diurnal profile of EBCff displays a typical morning peak during the morning traffic rush hour and shows a decreasing concentration during weekends due to lower the traffic emission.

The repeated cytogenetic analysis of subjects occupationally exposed to nanoparticles: a pilot study.

The application of nanomaterials has been rapidly increasing during recent years. Inhalation exposure to nanoparticles (NP) may result in negative toxic effects but there is a critical lack of human studies, especially those related to possible DNA alterations. We analyzed pre-shift and post-shift a group of nanocomposite researchers with a long-term working background (17.8 ± 10.0 years) and matched controls. The study group consisted of 73.2% males and 26.8% females. Aerosol exposure monitoring during a working shift (involving welding, smelting, machining) to assess the differences in exposure to particulate matter (PM) including nanosized fractions <25-100 nm, and their chemical analysis, was carried out. A micronucleus assay using Human Pan Centromeric probes, was applied to distinguish between the frequency of centromere positive (CEN+) and centromere negative (CEN-) micronuclei (MN) in the binucleated cells. This approach allowed recognition of the types of chromosomal damage: losses and breaks. The monitoring data revealed differences in the exposure to NP related to individual working processes, and in the chemical composition of nanofraction. The cytogenetic results of this pilot study demonstrated a lack of effect of long-term (years) exposure to NP (total frequency of MN, P = 0.743), although this exposure may be responsible for DNA damage pattern changes (12% increase of chromosomal breaks-clastogenic effect). Moreover, short-term (daily shift) exposure could be a reason for the increase of chromosomal breaks in a subgroup of researchers involved in welding and smelting processes (clastogenic effect, P = 0.037). The gender and/or gender ratio of the study participants was also an important factor for the interpretation of the results. As this type of human study is unique, further research is needed to understand the effects of long-term and short-term exposure to NP.

Assessment of air pollution origin based on year-long parallel measurement of PM2.5 and PM10 at two suburban sites in Prague, Czech Republic.

From 2nd April 2008 to 28th March 2009, a total 248 daily samples of the PM2.5 and PM10 were collected every sixth day parallel at two suburban sites (Libus and Suchdol) located at the two opposite sides (south and north, respectively) of Prague, Czech Republic. The PM2.5 samples were analyzed for ions by ion chromatography (IC), organic and elemental carbon (OC and EC) by OC/EC analyzer and PM10 samples also for 56 elements by inductively coupled plasma-mass spectrometry (ICP-MS). The average annual PM2.5 and PM10 was 24.4 ±â€¯13.0 µg m-3 and 26.7 ±â€¯15.1 µg m-3, respectively, in Prague-Libus, and 25.1 ±â€¯22.1 µg m-3 and 27.1 ±â€¯23.2 µg m-3, respectively, in Prague-Suchdol. Since the species forming large part of the aerosol mass were strongly correlated (Spearman's rank correlation coefficient rs > 0.80), the variability of PM2.5 and PM10 concentration was mainly driven by the local meteorology or regional and/or long range transport. PM10 mass closure was calculated based on analytical results with the average percentage of recalculated mass of 77 ±â€¯19% in Prague-Libus and 86 ±â€¯16% in Prague-Suchdol. The most abundant groups in PM10 at both sites during the four seasons were OM (Prague-Libus 34% and Prague-Suchdol 37%) and SIA (Prague-Libus 30% and Prague-Suchdol 34%). The Positive Matrix Factorization (PMF) was applied to the chemical composition of PM10 from both sites (124 samples) together to determine its sources. The nine factors were assigned as: mixed factor secondary sulphate and biomass burning, secondary sulphate, traffic, secondary nitrate, road dust, residential heating, aged sea salt, industry and mixed factor road salt along with aged sea salt. According to the polar plots and ventilation index (VI) east/west classification analysis the sources were separated based on origin to four categories local, urban agglomeration, regional and long range transport (LRT). The mixed source secondary sulphate and biomass burning, residential heating and industry were common sources of local origin at both sites. Prague-Suchdol was influenced by traffic related pollution from the urban agglomeration more than Prague-Libus where the traffic and road dust/salt were of local origin. The regional pollution by secondary sulphates and nitrate was also relevant at both sites along with long range transport of sea salt from North Atlantic Ocean, Norwegian Sea and North Sea. The contribution of the local sources to PM10 was significant mainly at Prague-Libus site. However, the sources of regional origin were also important and influence of urban agglomeration pollution to PM10 is not negligible as well.

Leukocyte telomere length is not affected by long-term occupational exposure to nano metal oxides.

The aim of this study was to ascertain whether long-term occupational exposure to nanoparticles would affect relative leukocyte telomere length (LrTL). We analysed occupational exposure to size-resolved aerosol particles, with special emphasis on nanoparticles at two workshops: i/ the production of nanocomposites containing metal oxides; ii/ laboratory to test experimental exposure of nano-CuO to rodents. Thirty five exposed researchers (age 39.5 ± 12.6 yr; exposure duration 6.0 ± 3.7 yr) and 43 controls (40.4 ± 10.5 yr) were examined. LrTL did not significantly (p=0.14) differ between the exposed researchers (0.92 ± 0.13) and controls (0.86 ± 0.15). In addition, no significant correlation (r=-0.22, p=0.22) was detected between the duration of occupational exposure and LrTL. The results remained non-significant after multiple adjustments for age, sex and smoking status. Our pilot results suggest that relative leukocyte telomere length is not affected by occupational exposure to nanoparticles.

The influence of local emissions and regional air pollution transport on a European air pollution hot spot.

The EU air quality standards have been frequently exceeded in one of the European air pollution hot spots: Ostrava. The aim of this study was to perform an air quality comparison between an urban site (Radvanice), which has a nearby metallurgical complex, and a suburban site (Plesná) to estimate air pollution sources and determine their local and/or regional origins. Twenty-four hour PM1 and PM10 (particular matter) concentrations, detailed mass size distributions (MSDs) to distinguish the sources of the fine and coarse PM, and their chemical compositions were investigated in parallel at both sites during the winter of 2014. Positive matrix factorization (PMF) was applied to the PM1 and PM10 chemical compositions to investigate their sources. During the measurement campaign, prevailing northeastern-southwestern (NE-SW) wind directions (WDs) were recorded. Higher average PM10 concentration was measured in Radvanice than in Plesná, whereas PM1 concentrations were similar at both sites. A source apportionment analysis revealed six and five sources for PM10 and PM1, respectively. In Radvanice, the amount of PM and the most chemical species were similar under SW and NE WD conditions. The dominant sources were industrial (43% for PM10 and 27% for PM1), which were caused by a large metallurgical complex located to the SW, and biomass burning (25% for PM10 and 36% for PM1). In Plesná, the concentrations of PM and all species significantly increased under NE WD conditions. Secondary inorganic aerosols were dominant, with the highest contributions deriving from the NE WD. Therefore, regional pollution transport from the industrial sector in Silesian Province (Poland) was evident. Biomass burning contributed 22% and 24% to PM10 and PM1, respectively. The air quality in Ostrava was influenced by local sources and regional pollution transport. The issue of poor air quality in this region is complex. Therefore, international cooperation from both states (the Czech Republic and Poland) is needed to achieve a reduction in air pollution levels.

Deep Airway Inflammation and Respiratory Disorders in Nanocomposite Workers.

Thousands of researchers and workers worldwide are employed in nanocomposites manufacturing, yet little is known about their respiratory health. Aerosol exposures were characterized using real time and integrated instruments. Aerosol mass concentration ranged from 0.120 mg/m³ to 1.840 mg/m³ during nanocomposite machining processes; median particle number concentration ranged from 4.8 × 104 to 5.4 × 105 particles/cm³. The proportion of nanoparticles varied by process from 40 to 95%. Twenty employees, working in nanocomposite materials research were examined pre-shift and post-shift using spirometry and fractional exhaled nitric oxide (FeNO) in parallel with 21 controls. Pro-inflammatory leukotrienes (LT) type B4, C4, D4, and E4; tumor necrosis factor (TNF); interleukins; and anti-inflammatory lipoxins (LXA4 and LXB4) were analyzed in their exhaled breath condensate (EBC). Chronic bronchitis was present in 20% of researchers, but not in controls. A significant decrease in forced expiratory volume in 1 s (FEV1) and FEV1/forced vital capacity (FVC) was found in researchers post-shift (p ˂ 0.05). Post-shift EBC samples were higher for TNF (p ˂ 0.001), LTB4 (p ˂ 0.001), and LTE4 (p ˂ 0.01) compared with controls. Nanocomposites production was associated with LTB4 (p ˂ 0.001), LTE4 (p ˂ 0.05), and TNF (p ˂ 0.001), in addition to pre-shift LTD4 and LXB4 (both p ˂ 0.05). Spirometry documented minor, but significant, post-shift lung impairment. TNF and LTB4 were the most robust markers of biological effects. Proper ventilation and respiratory protection are required during nanocomposites processing.

Markers of Oxidative Stress in the Exhaled Breath Condensate of Workers Handling Nanocomposites.

Researchers in nanocomposite processing may inhale a variety of chemical agents, including nanoparticles. This study investigated airway oxidative stress status in the exhaled breath condensate (EBC). Nineteen employees (42.4 ± 11.4 y/o), working in nanocomposites research for 18.0 ± 10.3 years were examined pre-shift and post-shift on a random workday, together with nineteen controls (45.5 ± 11.7 y/o). Panels of oxidative stress biomarkers derived from lipids, nucleic acids, and proteins were analyzed in the EBC. Aerosol exposures were monitored during three major nanoparticle generation operations: smelting and welding (workshop 1) and nanocomposite machining (workshop 2) using a suite of real-time and integrated instruments. Mass concentrations during these operations were 0.120, 1.840, and 0.804 mg/m³, respectively. Median particle number concentrations were 4.8 × 104, 1.3 × 105, and 5.4 × 105 particles/cm³, respectively. Nanoparticles accounted for 95, 40, and 61%, respectively, with prevailing Fe and Mn. All markers of nucleic acid and protein oxidation, malondialdehyde, and aldehydes C6⁻C13 were elevated, already in the pre-shift samples relative to controls in both workshops. Significant post-shift elevations were documented in lipid oxidation markers. Significant associations were found between working in nanocomposite synthesis and EBC biomarkers. More research is needed to understand the contribution of nanoparticles from nanocomposite processing in inducing oxidative stress, relative to other co-exposures generated during welding, smelting, and secondary oxidation processes, in these workshops.