Using the High-Entropy Approach to Obtain Multimetal Oxide Nanozymes: Library Synthesis, In Silico Structure-Activity, and Immunoassay Performance.

High-entropy nanomaterials exhibit exceptional mechanical, physical, and chemical properties, finding applications in many industries. Peroxidases are metalloenzymes that accelerate the decomposition of hydrogen peroxide. This study uses the high-entropy approach to generate multimetal oxide-based nanozymes with peroxidase-like activity and explores their application as sensors in ex vivo bioassays. A library of 81 materials was produced using a coprecipitation method for rapid synthesis of up to 100 variants in a single plate. The A and B sites of the magnetite structure, (AA')(BB'B'')2O4, were substituted with up to six different cations (Cu/Fe/Zn/Mg/Mn/Cr). Increasing the compositional complexity improved the catalytic performance; however, substitutions of single elements also caused drastic reductions in the peroxidase-like activity. A generalized linear model was developed describing the relationship between material composition and catalytic activity. Binary interactions between elements that acted synergistically or antagonistically were identified, and a single parameter, the mean interaction effect, was observed to correlate highly with catalytic activity, providing a valuable tool for the design of high-entropy-inspired nanozymes.

Operando acoustic emission monitoring of degradation processes in lithium-ion batteries with a high-entropy oxide anode.

In recent years, high-entropy oxides are receiving increasing attention for electrochemical energy-storage applications. Among them, the rocksalt (Co0.2Cu0.2Mg0.2Ni0.2Zn0.2)O (HEO) has been shown to be a promising high-capacity anode material. Because high-entropy oxides constitute a new class of electrode materials, systematic understanding of their behavior during ion insertion and extraction is yet to be established. Here, we probe the conversion-type HEO material in lithium half-cells by acoustic emission (AE) monitoring. Especially the clustering of AE signals allows for correlations of acoustic events with various processes. The initial cycle was found to be the most acoustically active because of solid-electrolyte interphase formation and chemo-mechanical degradation. In the subsequent cycles, AE was mainly detected during delithiation, a finding we attribute to the progressive crack formation and propagation. Overall, the data confirm that the AE technology as a non-destructive operando technique holds promise for gaining insight into the degradation processes occurring in battery cells during cycling.

High Entropy and Low Symmetry: Triclinic High-Entropy Molybdates.

Metal molybdates constitute a promising class of materials with a wide application range. Here, we report, to our knowledge for the first time, on the preparation and characterization of medium-entropy and high-entropy metal molybdates, synthesized by an oxalate-based coprecipitation approach. The high-entropy molybdate crystallizes in a triclinic structure, thus rendering it as high-entropy material with the lowest symmetry reported so far. This is noteworthy because high-entropy materials usually tend to crystallize into highly symmetrical structures. It is expected that application of the high-entropy concept to metal molybdates alters the material's characteristics and adds the features of high-entropy systems, that is, tailorable composition and properties. The phase purity and solid solution nature of the molybdates were confirmed by XRD, Raman spectroscopy, TEM, XPS, and ICP-OES.

In Situ Monitoring of Thermally Induced Effects in Nickel-Rich Layered Oxide Cathode Materials at the Atomic Level.

The thermal stability of cathode active materials (CAMs) is of major importance for the safety of lithium-ion batteries (LIBs). A thorough understanding of how commercially viable layered oxide CAMs behave at the atomic length scale upon heating is indispensable for the further development of LIBs. Here, structural changes of Li(Ni0.85Co0.15Mn0.05)O2 (NCM851005) at elevated temperatures are studied by in situ aberration-corrected scanning transmission electron microscopy (AC-STEM). Heating NCM851005 inside the microscope under vacuum conditions enables us to observe phase transitions and other structural changes at high spatial resolutions. This has been primarily possible by establishing low-dose electron beam conditions in STEM. Specific focus is put on the evolution of inherent nanopore defects found in the primary grains, which are believed to play an important role in LIB degradation. The onset temperature of structural changes is found to be ∼175 °C, resulting in phase transformation from a layered to a rock-salt-like structure, especially at the internal interfaces, and increasing intragrain inhomogeneity. The reducing environment and heat application lead to the formation and subsequent densification of {003}- and {014}-type facets. In the light of these results, postsynthesis electrode drying processes applied under reducing environment and heat, for example, in the preparation of solid-state batteries, should be re-examined carefully.

Lithium containing layered high entropy oxide structures.

Layered Delafossite-type Lix(M1M2M3M4M5…Mn)O2 materials, a new class of high-entropy oxides, were synthesized by nebulized spray pyrolysis and subsequent high-temperature annealing. Various metal species (M = Ni, Co, Mn, Al, Fe, Zn, Cr, Ti, Zr, Cu) could be incorporated into this structure type, and in most cases, single-phase oxides were obtained. Delafossite structures are well known and the related materials are used in different fields of application, especially in electrochemical energy storage (e.g., LiNixCoyMnzO2 [NCM]). The transfer of the high-entropy concept to this type of materials and the successful structural replication enabled the preparation of novel compounds with unprecedented properties. Here, we report on the characterization of a series of Delafossite-type high-entropy oxides by means of TEM, SEM, XPS, ICP-OES, Mössbauer spectroscopy, XRD including Rietveld refinement analysis, SAED and STEM mapping and discuss about the role of entropy stabilization. Our experimental data indicate the formation of uniform solid-solution structures with some Li/M mixing.

The Role of Intragranular Nanopores in Capacity Fade of Nickel-Rich Layered Li(Ni1-x-yCoxMny)O2 Cathode Materials.

Ni-rich layered LiNi1-x-yCoxMnyO2 (NCM, x + y ≤ 0.2) is an intensively studied class of cathode active materials for lithium-ion batteries, offering the advantage of high specific capacities. However, their reactivity is also one of the major issues limiting the lifetime of the batteries. NCM degradation, in literature, is mostly explained both by disintegration of secondary particles (large anisotropic volume changes during lithiation/delithiation) and by formation of rock-salt like phases at the grain surfaces at high potential with related oxygen loss. Here, we report the presence of intragranular nanopores in Li1+x(Ni0.85Co0.1Mn0.05)1-xO2 (NCM851005) and track their morphological evolution from pristine to cycled material (200 and 500 cycles) using aberration-corrected scanning transmission electron microscopy (STEM), electron energy loss spectroscopy, energy dispersive X-ray spectroscopy, and time-of-flight secondary ion mass spectrometry. Pores are already found in the primary particles of pristine material. Any potential effect of TEM sample preparation on the formation of nanopores is ruled out by performing thickness series measurements on the lamellae produced by focused ion beam milling. The presence of nanopores in pristine NCM851005 is in sharp contrast to previously observed pore formation during electrochemical cycling or heating. The intragranular pores have a diameter in the range between 10 and 50 nm with a distinct morphology that changes during cycling operation. A rock-salt like region is observed at the pore boundaries even in pristine material, and these regions grow with prolonged cycling. It is suggested that the presence of nanopores strongly affects the degradation of high-Ni NCM, as the pore surfaces apparently increase (i) oxygen loss, (ii) formation of rock-salt regions, and (iii) strain-induced effects within the primary grains. High-resolution STEM demonstrates that nanopores are a source of intragranular cracking during cycling.

Silicon Nanoparticles with a Polymer-Derived Carbon Shell for Improved Lithium-Ion Batteries: Investigation into Volume Expansion, Gas Evolution, and Particle Fracture.

Silicon (Si) and composites thereof, preferably with carbon (C), show favorable lithium (Li) storage properties at low potential, and thus hold promise for application as anode active materials in the energy storage area. However, the high theoretical specific capacity of Si afforded by the alloying reaction with Li involves many challenges. In this article, we report the preparation of small-size Si particles with a turbostratic carbon shell from a polymer precoated powder material. Galvanostatic charge/discharge experiments conducted on electrodes with practical loadings resulted in much improved capacity retention and kinetics for the Si/C composite particles compared to physical mixtures of pristine Si particles and carbon black, emphasizing the positive effect that the core-shell-type morphology has on the cycling performance. Using in situ differential electrochemical mass spectrometry, pressure, and acoustic emission measurements, we gain insights into the gassing behavior, the bulk volume expansion, and the mechanical degradation of the Si/C composite-containing electrodes. Taken together, our research data demonstrate that some of the problems of high-content Si anodes can be mitigated by carbon coating. Nonetheless, continuous electrolyte decomposition, particle fracture, and electrode restructuring due to the large volume changes during battery operation (here, ∼170% in the voltage range of 600-30 mV vs Li+/Li) remain as serious hurdles toward practical implementation.