Chemical and toxicological assessment of leachates from UV-degraded plastic materials using in-vitro bioassays.

The broad use of plastics and the persistence of the material results in plastic residues being found practically everywhere in the environment. If plastics remain in the (aquatic) environment, natural weathering leads to degradation processes and compounds may leach from plastic into the environment. To investigate the impact of degradation process on toxicity of leachates, different types of UV irradiation (UV-C, UV-A/B) were used to simulate weathering processes of different plastic material containing virgin as well as recyclate material and biodegradable polymers. The leached substances were investigated toxicologically using in-vitro bioassays. Cytotoxicity was determined by the MTT-assay, genotoxicity by using the p53-CALUX and Umu-assay, and estrogenic effects by the ERα-CALUX. Genotoxic as well as estrogenic effects were detected in different samples depending on the material and the irradiation type. In four leachates of 12 plastic species estrogenic effects were detected above the recommended safety level of 0.4 ng 17ß-estradiol equivalents/L for surface water samples. In the p53-CALUX and in the Umu-assay leachates from three and two, respectively, of 12 plastic species were found to be genotoxic. The results of the chemical analysis show that plastic material releases a variety of known and unknown substances especially under UV radiation, leading to a complex mixture with potentially harmful effects. In order to investigate these aspects further and to be able to give recommendations for the use of additives in plastics, further effect-related investigations are advisable.

Quantification of Poly(vinyl chloride) Microplastics via Pressurized Liquid Extraction and Combustion Ion Chromatography.

A reliable analytical method has been developed to quantify poly(vinyl chloride) (PVC) in environmental samples. Quantification was conducted via combustion ion chromatography (C-IC). Hydrogen chloride (HCl) was quantitatively released from PVC during thermal decomposition and trapped in an absorption solution. Selectivity of the marker HCl in complex environmental samples was ensured using cleanup via pressurized liquid extraction (PLE) with methanol at 100 °C (discarded) and tetrahydrofuran at 185 °C (collected). Using this method, recoveries of 85.5 ± 11.5% and a limit of quantification down to 8.3 µg/g were achieved. A variety of hard and soft PVC products could be successfully analyzed via C-IC with recoveries exceeding >95%. Furthermore, no measurable overdetermination was found for various organic and inorganic matrix ingredients, such as sodium chloride, sucralose, hydroxychloroquine, diclofenac, chloramphenicol, triclosan, or polychlorinated biphenyls. In addition, sediments and suspended particular matter showed PVC concentrations ranging up to 16.0 and 220 µg/g, respectively. However, the gap between determined polymer mass and particle masses could be significant since soft PVC products contain plasticizers up to 50 wt %. Hence, the results of the described method represent a sum of all chlorine-containing polymers, which are extractable under the chosen conditions.

UV aged epoxy coatings - Ecotoxicological effects and released compounds.

Organic coatings can guarantee long-term protection of steel structures due to causing a physical barrier against water and oxygen. Because of their mechanical properties and resistances to heat and chemicals, epoxy resin-based coatings are widely used for corrosion protection. Despite of the aromatic backbone and the resulting susceptibility to UV degradation, epoxy resins are frequently used as binding agent in top layers of anti-corrosion coating systems. Consequently, these organic polymers are directly exposed to sunlight and thus UV radiation. The present study was designed to investigate if toxic effects of epoxy resin-based-coatings are changed by UV-A irradiation. For this purpose, two epoxide-based top coatings were examined with and without UV aging for their bacterial toxicity and estrogenicity. In addition, chemical analyses were performed to identify released compounds as well as photolytic degradation products and to assign toxic effects to individual substances. UV-A irradiation of epoxy resin based top coatings resulted in an overall decrease of acute and specific ecotoxicological effects but as well to the formation of toxic transformation products. Both, in leachates of untreated and UV-A irradiated coatings, 4tBP was identified as the main driver of estrogenicity and toxicity to luminescent bacteria. BPA and structural analogs contributing to estrogenic effects in leachates were formed by UV-A irradiation. The combination of HPTLC coupled bioassays and LC-MS analyses supported the identification of bioactive compounds in terms of an effect-directed analysis. The present findings indicate that epoxide-based coatings are less suitable for the application as top coatings and more UV stable coatings like aliphatic polyurethanes should be preferred.

Enhanced in vitro toxicity of plastic leachates after UV irradiation.

Plastics can release numerous chemicals and thereby, contribute to the chemical pollution in aquatic systems. To which extent environmental degradation processes influence the release of plastic chemicals, is currently unknown and subject of research. We therefore evaluated aqueous leachates of 12 differently formulated plastics (e.g., pre-production, post-industrial and recycled pellets as well as final products) using in vitro bioassays and chemical analysis via LC-HRMS nontarget approach. We weathered these plastics by UV irradiation (UV-C and UV-A/B) under laboratory conditions in dryness and a subsequent leaching period in ultrapure water ('atmospheric' weathering) or directly in water ('aquatic' weathering, UV-A/Baq). A dark control (DC) without UV light served as a reference treatment. Some plastics triggered several toxicological endpoints (low-density polyethylene recyclate (LDPE-R), starch blend (SB), bio-based polybutylene succinate (Bio-PBS) and polyvinyl chloride (PVC)), whereas others caused little to no effects (polyethylene terephthalate (PET), polystyrene (PS), polypropylene (PP) and LDPE). UV irradiation enhanced the plastics' toxicity, even for samples initially evaluated as toxicologically inconspicuous. The plastic samples caused oxidative stress (85%), baseline toxicity (42%), antiestrogenicity (40%) and antiandrogenicity (27%). Positive findings were measured after UV-C (63%) and UV-A/Baq (50%) treatments, followed by UV-A/B (48%) and DC (33%). Overall, we detected between 42 (DC) and 2896 (UV-A/Baq) chemical compounds. Our study demonstrates that differently formulated plastics leach toxic chemicals. UV exacerbates the plastics' toxicity by either generating active compounds and/or by facilitating their release. UV light even leads to the release of bioactive compounds from plastics of low chemical complexity. To prevent the exposure to plastic-associated chemicals, the application of chemicals could be reduced to a minimum, while on a regulatory level the evaluation of plastic eluates could be another focal point next to singular compounds.

Chemicals associated with biodegradable microplastic drive the toxicity to the freshwater oligochaete Lumbriculus variegatus.

Microplastics (MPs) as complex synthetic pollutants represent a growing concern for the aquatic environment. Previous studies examined the toxicity of MPs, but infrequently used a natural particle control such as kaolin. The cause of toxicity, either the physical structure of the particles or chemical components originating from the MPs, has rarely been resolved. Moreover, the ecotoxicological assessment of biodegradable plastics has received little attention. To narrow down the main driver for toxicity of irregular biodegradable MPs, we conducted a series of 28-days sediment toxicity tests with the freshwater oligochaete Lumbriculus variegatus and recorded the number of worms and dry weight as endpoints. Therefore, MPs containing several biodegradable polymers were either mixed with the sediment or layered on the sediment surface with concentrations from 1 to 8.4% sediment dw-1. Kaolin particles were evaluated in parallel as particle control. Furthermore, aqueous leachates and methanolic extracts as MP equivalents as well as solvent-treated, presumably pure MPs were investigated after mixing them into the sediment. Our results reveal that MP mixed with the sediment induced stronger adverse effects than layered MP. Kaolin particles caused no adverse effects. In contrast, they enhanced dry weight in both applications. The impact of aqueous leachates was comparable to the control without MPs, whereas methanolic extracts affected the worm number at the highest concentration with 100% mortality. Solvent-treated, presumably pure MP resulted in mostly higher worm numbers when compared to untreated MPs mixed into the sediment. This study demonstrates that MPs mixed into the sediment affect L. variegatus more than MPs that are layered on the sediment surface. Kaolin as a natural, fine-sized particle control created somewhat favorable conditions for the worm. The main driver for toxicity, however, proved to be chemicals associated with the plastic product and its previous content.

RirA of Dinoroseobacter shibae senses iron via a [3Fe-4S]1+ cluster co-ordinated by three cysteine residues.

In the marine bacterium, Dinoroseobacter shibae the transcription factor rhizobial iron regulator A (RirA) is involved in the adaptation to iron-limited growth conditions. In vitro iron and sulfide content determinations in combination with UV/Vis and electron paramagnetic resonance (EPR) spectroscopic analyses using anaerobically purified, recombinant RirA protein suggested a [3Fe-4S]1+ cluster as a cofactor. In vivo Mössbauer spectroscopy also corroborated the presence of a [3Fe-4S]1+ cluster in RirA. Moreover, the cluster was found to be redox stable. Three out of four highly conserved cysteine residues of RirA (Cys 91, Cys 99, Cys 105) were found essential for the [3Fe-4S]1+ cluster coordination. The dimeric structure of the RirA protein was independent of the presence of the [3Fe-4S]1+ cluster. Electro mobility shift assays demonstrated the essential role of an intact [3Fe-4S]1+ cluster for promoter binding by RirA. The DNA binding site was identified by DNase I footprinting. Mutagenesis studies in combination with DNA binding assays confirmed the promoter binding site as 3'-TTAAN10AATT-5'. This work describes a novel mechanism for the direct sensing of cellular iron levels in bacteria by an iron-responsive transcriptional regulator using the integrity of a redox-inactive [3Fe-4S]1+ cluster, and further contributes to the general understanding of iron regulation in marine bacteria.

[(NHC)CoR2]: pre-catalysts for homogeneous olefin and alkyne hydrogenation.

A novel synthesis for dialkyl cobalt compounds [(tmeda)CoR2] is presented. In these complexes tmeda is readily replaced by an NHC or a bidentate phosphine ligand to form 3- and 4-coordinate compounds, respectively. [(ItBu)Co(CH2SiMe3)2] (ItBu = 1,3-di-tert-butylimidazolin-2-ylidene) serves as an efficient, homogeneous olefin hydrogenation pre-catalyst and allows the preparation of the novel cobalt bis(alkyne) complex [(ItBu)Co(η2-PhCCPh)2].

Monomeric Fe(iii) half-sandwich complexes [Cp'FeX2] - synthesis, properties and electronic structure.

The half-sandwich complex [Cp'Fe(µ-I)]2 (1; Cp' = η5-1,2,4-(Me3C)3C5H2) is cleaved when heated in toluene to form a cation-anion pair [{Cp'Fe(η6-toluene)}+{Cp'FeI2}-] (2), in which the two Fe(ii) atoms adopt different spin states, i.e., a low-spin (S = 0) and a high-spin (S = 2) configuration. Upon oxidation of 1 with C2H4I2, the thermally stable 15VE species [Cp'FeI2] (3) can be isolated, in which the Fe(iii) atom adopts an intermediate spin (S = 3/2) configuration. Complex 3 is an excellent starting material for further functionalizations and it reacts with Mg(CH2SiMe3)2 to form the unprecedented Fe(iii) (S = 3/2) bis(alkyl) complex [Cp'Fe(CH2SiMe3)2] (4). The respective spin states of complexes 2-4 are confirmed by single-crystal X-ray crystallography, zero-field 57Fe Mössbauer spectroscopy, and solid-state magnetic susceptibility measurements. In contrast to the related 14VE high-spin (S = 2) Fe(ii) alkyl species [Cp'FeCH(SiMe3)2], which resists the reaction with H2 as a consequence of a spin-induced reaction barrier, complex 4 reacts cleanly with H2 (8 bar) in cyclohexane to yield iron hydrides [{Cp'Fe}2(µ-H)3] (5) and [Cp'Fe(µ-H)2]2 (6) in a 1 : 4 ratio. However, when the hydrogenation of 4 is carried out in benzene, a green 19VE [Cp'Fe(η6-C6H6)] (A) intermediate is formed, which dimerizes to the bis(cyclohexadienyl)-bridged product [(Cp'Fe)2(µ2-η5:η5-C12H12)] (7). Further evidence for the intermediacy of [Cp'Fe(η6-C6H6)] (A) was gathered by X-band EPR and UV/vis spectroscopy. Interestingly, attempts to oxidize 7 with AgSbF6 proceeded via C-C bond cleavage instead of metal oxidation to form [Cp'Fe(C6H6)][SbF6] (8).

The radical SAM protein HemW is a heme chaperone.

Radical S-adenosylmethionine (SAM) enzymes exist in organisms from all kingdoms of life, and all of these proteins generate an adenosyl radical via the homolytic cleavage of the S-C(5') bond of SAM. Of particular interest are radical SAM enzymes, such as heme chaperones, that insert heme into respiratory enzymes. For example, heme chaperones insert heme into target proteins but have been studied only for the formation of cytochrome c-type hemoproteins. Here, we report that a radical SAM protein, the heme chaperone HemW from bacteria, is required for the insertion of heme b into respiratory chain enzymes. As other radical SAM proteins, HemW contains three cysteines and one SAM coordinating an [4Fe-4S] cluster, and we observed one heme per subunit of HemW. We found that an intact iron-sulfur cluster was required for HemW dimerization and HemW-catalyzed heme transfer but not for stable heme binding. A bacterial two-hybrid system screen identified bacterioferritins and the heme-containing subunit NarI of the respiratory nitrate reductase NarGHI as proteins that interact with HemW. We also noted that the bacterioferritins potentially serve as heme donors for HemW. Of note, heme that was covalently bound to HemW was actively transferred to a heme-depleted, catalytically inactive nitrate reductase, restoring its nitrate-reducing enzyme activity. Finally, the human HemW orthologue radical SAM domain-containing 1 (RSAD1) stably bound heme. In conclusion, our findings indicate that the radical SAM protein family HemW/RSAD1 is a heme chaperone catalyzing the insertion of heme into hemoproteins.

Heme and nitric oxide binding by the transcriptional regulator DnrF from the marine bacterium Dinoroseobacter shibae increases napD promoter affinity.

Under oxygen-limiting conditions, the marine bacterium Dinoroseobacter shibae DFL12T generates energy via denitrification, a respiratory process in which nitric oxide (NO) is an intermediate. Accumulation of NO may cause cytotoxic effects. The response to this nitrosative (NO-triggered) stress is controlled by the Crp/Fnr-type transcriptional regulator DnrF. We analyzed the response to NO and the mechanism of NO sensing by the DnrF regulator. Using reporter gene fusions and transcriptomics, here we report that DnrF selectively repressed nitrate reductase (nap) genes, preventing further NO formation. In addition, DnrF induced the expression of the NO reductase genes (norCB), which promote NO consumption. We used UV-visible and EPR spectroscopy to characterize heme binding to DnrF and subsequent NO coordination. DnrF detects NO via its bound heme cofactor. We found that the dimeric DnrF bound one molecule of heme per subunit. Purified recombinant apo-DnrF bound its target promoter sequences (napD, nosR2, norC, hemA, and dnrE) in electromobility shift assays, and we identified a specific palindromic DNA-binding site 5'-TTGATN4ATCAA-3' in these target sequences via mutagenesis studies. Most importantly, successive addition of heme as well as heme and NO to purified recombinant apo-DnrF protein increased affinity of the holo-DnrF for its specific binding motif in the napD promoter. On the basis of these results, we propose a model for the DnrF-mediated NO stress response of this marine bacterium.

Viking Helmet Corroles: Activating Inert Oxidometal Corroles.

Chemically inert oxidometal(V) corrols of molybdenum and rhenium undergo clean ligand-exchange reactions upon the action of SiCl4 . The resulting dichlorido complexes show trigonal prismatic coordination of the metal ion with the chlorine atoms residing in a cis configuration, and were studied by optical and resonance spectroscopy as well as DFT calculations. In situ reactivity studies with carbon nucleophiles indicate high reactivity for chlorine replacement. Treatment with sodium cyclopentadienide paves the way to robust molybdenum corrolocene half-sandwich complexes. These organometallic compounds are the first corrole species that stabilize an air-stable and diamagnetic low spin d2 -MoIV center. Structural, spectroelectrochemical, and chemical investigations prove a reversible MoIV /MoV redox couple close to the Fc/Fc+ potential for these systems. The high stability of the compounds in both redox states calls for future applications in catalysis and as redox switch.

Synthesis and Electronic Ground-State Properties of Pyrrolyl-Based Iron Pincer Complexes: Revisited.

The pyrrolyl-based iron pincer compounds [(tBuPNP)FeCl] (1), [(tBuPNP)FeN2] (2), and [(tBuPNP)Fe(CO)2] (3) were prepared and structurally characterized. In addition, their electronic ground states were probed by various techniques including solid-state magnetic susceptibility and zero-field 57Fe Mössbauer and X-band electron paramagnetic resonance spectroscopy. While the iron(II) starting material 1 adopts an intermediate-spin (S = 1) state, the iron(I) reduction products 2 and 3 exhibit a low-spin (S = 1/2) ground state. Consistent with an intermediate-spin configuration for 1, the zero-field 57Fe Mössbauer spectrum shows a characteristically large quadrupole splitting (ΔEQ ≈ 3.7 mm s-1), and the solid-state magnetic susceptibility data show pronounced zero-field splitting (|D| ≈ 37 cm-1). The effective magnetic moments observed for the iron(I) species 2 and 3 are larger than expected from the spin-only value and indicate an incompletely quenched orbital angular momentum and the presence of spin-orbit coupling in the ground state. The experimental findings are complemented by density functional theory computations, which are in good agreement with the experimental data. Most notably, these calculations reveal a low-lying (S = 2) excited state for complex 1; furthermore, the computed Mössbauer parameters for all complexes studied herein are in excellent agreement with the experimental findings.

Heterocorrole Conformations: Little Saddling, Much Ruffling.

10-Heterocorrole complexes with oxygen, sulfur, and selenium at position 10 of the macrocycle and with the divalent ions of nickel, copper, and palladium were prepared and investigated. The focus was set on the size adaptation and matching mechanisms of cavity size versus ionic radius in corrole-type macrocycles. A full set of single-crystal X-ray analytical data revealed that in all but one case the N4 binding site of the ring-contracted tetrapyrrole was larger than necessary to bind the metal ion without deformation. In-plane size adaptation through M-N bond-length elongation by 2.5-3.2 % was effective, as well as pronounced out-of-plane ruffling of the macrocycle for those compounds with a more severe size mismatch. Such ruffling had been excluded for corroles previously, but is apparently the most efficient mechanism to adapt to small central ions.

N-Heterocyclic Carbene Stabilized Boryl Radicals.

The reaction of the 2-(trimethylsilyl)imidazolium triflate 9 with diarylboron halides (4-R-C6 H4 )2 BX (R=H, X=Br; R=CH3 , X=Cl; R=CF3 , X=Cl) afforded the NHC-stabilized borenium cations 10 a-c. Cyclic voltammetry revealed a linear correlation between the Hammett parameter σp of the para substituent and the half-wave potential. Chemical reduction with decamethylcobaltocene, [(C5 Me5 )2 Co], furnished the corresponding radicals 11 a-c; their characterization by EPR spectroscopy confirmed the paramagnetic character of 11 a-c, with large hyperfine coupling constants to the boron isotopes 11 B and 10 B, while delocalization of the unpaired electron into the NHC is negligible. DFT calculations of the percentage of spin density distribution between the carbene (NHC) and the boryl fragments (BR2 ) revealed for 11 a-c a spin density ratio (BR2 /NHC) of ca. 9:1, which underlines their distinct boryl radical character. The molecular structure of the most stable species 11 c was established by X-ray diffraction analysis.

Metal-Assisted One-Pot Synthesis of Isoporphyrin Complexes.

Zinc and cadmium complexes of meso-arylisoporphyrins carrying a pyrrolyl or dipyrrinyl substituent at the sp(3) carbon atom were obtained through a simple one-pot variation of the Alder-Longo porphyrin synthesis. Key to the formation and stabilization of isoporphyrins is the presence of metal acetates during the oxidative macrocyclization step. The characteristic Q-bands of isoporphyrins are found in the NIR region between 750 nm and 880 nm. All of the isolated pyrrolyl- and dipyrrinyl-appended isoporphyrins are stable under typical laboratory conditions and allow chemical transformations like BF2 coordination, transmetalation, and ligand exchange.

The auxiliary [4Fe-4S] cluster of the Radical SAM heme synthase from Methanosarcina barkeri is involved in electron transfer.

The heme synthase AhbD catalyzes the oxidative decarboxylation of two propionate side chains of iron-coproporphyrin III to the corresponding vinyl groups of heme during the alternative heme biosynthesis pathway occurring in sulfate-reducing bacteria and archaea. AhbD belongs to the family of Radical SAM enzymes and contains two [4Fe-4S] clusters. Whereas one of these clusters is required for substrate radical formation, the role of the second iron-sulfur cluster is not known. In this study, the function of the auxiliary cluster during AhbD catalysis was investigated. Two single cluster variants of AhbD from M. barkeri carrying either one of the two clusters were created. Using these enzyme variants it was shown that the auxiliary cluster is not required for substrate binding and formation of the substrate radical. Instead, the auxiliary cluster is involved in a late step of AhbD catalysis most likely in electron transfer from the reaction intermediate to a final electron acceptor. Moreover, by using alternative substrates such as coproporphyrin III, Cu-coproporphyrin III and Zn-coproporphyrin III for the AhbD activity assay it was observed that the central iron ion of the porphyrin substrate also participates in the electron transfer from the reaction intermediate to the auxiliary [4Fe-4S] cluster. Altogether, new insights concerning the completely uncharacterized late steps of AhbD catalysis were obtained.

Cationic nickel porphyrinoids with unexpected reactivity.

Cationic nickel(ii) complexes of two ring-contracted porphyrinoid ligands distantly related to the corrins were prepared by metal templated macrocyclisation. The compounds show reversible electron transfer processes and were found to be the first porphyrinoid-based catalysts for C-C cross-coupling.

Spin Crossover and Valence Tautomerism in Neutral Homoleptic Iron Complexes of Bis(pyridylimino)isoindolines.

Homoleptic iron complexes of six bis(pyridylimino)isoindoline (bpi) ligands with different substituents (H, Me, Et, tBu, OMe, NMe2) at the 4-positions of the pyridine moieties have been prepared and studied with regard to temperature-dependent spin and redox states by a combination of (57)Fe Mössbauer spectroscopy, SQUID magnetometry, single-crystal X-ray diffraction analysis, X-band EPR, and (1)H NMR spectroscopy. While the H-, methyl-, and ethyl-substituted complexes remain in a pure high-spin state irrespective of the temperature, the 4-tert-butyl-substituted derivative shows spin-crossover behavior. The methoxy- and dimethylamino-substituted compounds were found to easily undergo oxidation. In the crystalline state, valence tautomeric behavior was observed for the methoxy derivative as a thermally activated charge-transfer transition, accompanied by a spin crossover above 200 K. The valence tautomerism leads to a chelate with one of the bpi ligands as a dianion radical L(2-·) and with an effective spin of S=2.

The Corrole Radical.

The reaction of 5,10,15-trimesitylcorrole (H3 cor) with tungsten hexachloride and tungsten hexacarbonyl resulted in the unexpected formation of the 3,17-dichloro-5,10,15-trimesitylcorrole radical (H2 cor*) as an air-stable product. X-ray crystallography proved the planarization of the corrole radical structure, which was rationalized by the reduced steric hindrance of two versus three hydrogen atoms inside the N4 cavity. Although the aromaticity was lost, no specific changes in C-C or C-N bond distances could be observed. The regioselectivity of the two-fold chlorination is the result of the nucleophilic attack of chloride ions to an oxidized corrole macrocycle, and is supported by DFT results. The corrole radical acts as a dianionic ligand and allows the insertion of the divalent zinc(II) cation, which usually does not form neutral corrole complexes.