Mitochondrial DNA editing in potato through mitoTALEN and mitoTALECD: molecular characterization and stability of editing events.

BACKGROUND: The aim of this study was to evaluate and characterize the mutations induced by two TALE-based approaches, double-strand break (DSB) induction by the FokI nuclease (mitoTALEN) and targeted base editing by the DddA cytidine deaminase (mitoTALECD), to edit, for the first time, the mitochondrial genome of potato, a vegetatively propagated crop. The two methods were used to knock out the same mitochondrial target sequence (orf125). RESULTS: Targeted chondriome deletions of different sizes (236-1066 bp) were induced by mitoTALEN due to DSB repair through ectopic homologous recombination of short direct repeats (11-12 bp) present in the target region. Furthermore, in one case, the induced DSB and subsequent repair resulted in the amplification of an already present substoichiometric molecule showing a 4288 bp deletion spanning the target sequence. With the mitoTALECD approach, both nonsense and missense mutations could be induced by base substitution. The deletions and single nucleotide mutations were either homoplasmic or heteroplasmic. The former were stably inherited in vegetative offspring. CONCLUSIONS: Both editing approaches allowed us to obtain plants with precisely modified mitochondrial genomes at high frequency. The use of the same plant genotype and mtDNA region allowed us to compare the two methods for efficiency, accuracy, type of modifications induced and stability after vegetative propagation.

Enzyme-Based Biostimulants Influence Physiological and Biochemical Responses of Lactuca sativa L.

Biostimulants (BSs) are natural materials (i.e., organic or inorganic compounds, and/or microorganisms) having beneficial effects on plant growth and productivity, and able to improve resilience/tolerance to biotic and abiotic stresses. Therefore, they represent an innovative alternative to the phyto- and agrochemicals, being environmentally friendly and a valuable tool to cope with extreme climate conditions. The objective of this study was to investigate the effects of several biomolecules (i.e., Xylanase, ß-Glucosidase, Chitinase, and Tramesan), alone or in combinations, on lettuce plant growth and quality. With this aim, the influence of these biomolecules on biomass, pigment content, and antioxidant properties in treated plants were investigated. Our results showed that Xylanase and, to a lesser extent, ß-Glucosidase, have potentially biostimulant activity for lettuce cultivation, positively influencing carotenoids, total polyphenols, and ascorbic acid contents; similar effects were found with respect to antioxidative properties. Furthermore, the effect of the more promising molecules (Xylanase and ß-Glucosidase) was also evaluated in kiwifruit cultured cells to test their putative role as sustainable input for plant cell biofactories. The absence of phytotoxic effects of both molecules at low doses (0.1 and 0.01 µM), and the significantly enhanced cell biomass growth, indicates a positive impact on kiwifruit cells.

Plastid Transformation: New Challenges in the Circular Economy Era.

In a circular economy era the transition towards renewable and sustainable materials is very urgent. The development of bio-based solutions, that can ensure technological circularity in many priority areas (e.g., agriculture, biotechnology, ecology, green industry, etc.), is very strategic. The agricultural and fishing industry wastes represent important feedstocks that require the development of sustainable and environmentally-friendly industrial processes to produce and recover biofuels, chemicals and bioactive molecules. In this context, the replacement, in industrial processes, of chemicals with enzyme-based catalysts assures great benefits to humans and the environment. In this review, we describe the potentiality of the plastid transformation technology as a sustainable and cheap platform for the production of recombinant industrial enzymes, summarize the current knowledge on the technology, and display examples of cellulolytic enzymes already produced. Further, we illustrate several types of bacterial auxiliary and chitinases/chitin deacetylases enzymes with high biotechnological value that could be manufactured by plastid transformation.

Tobacco Plastid Transformation as Production Platform of Lytic Polysaccharide MonoOxygenase Auxiliary Enzymes.

Plant biomass is the most abundant renewable resource in nature. In a circular economy perspective, the implementation of its bioconversion into fermentable sugars is of great relevance. Lytic Polysaccharide MonoOxygenases (LPMOs) are accessory enzymes able to break recalcitrant polysaccharides, boosting biomass conversion and subsequently reducing costs. Among them, auxiliary activity of family 9 (AA9) acts on cellulose in synergism with traditional cellulolytic enzymes. Here, we report for the first time, the production of the AA9 LPMOs from the mesophilic Trichoderma reesei (TrAA9B) and the thermophilic Thermoascus aurantiacus (TaAA9B) microorganisms in tobacco by plastid transformation with the aim to test this technology as cheap and sustainable manufacture platform. In order to optimize recombinant protein accumulation, two different N-terminal regulatory sequences were used: 5' untranslated region (5'-UTR) from T7g10 gene (DC41 and DC51 plants), and 5' translation control region (5'-TCR), containing the 5'-UTR and the first 14 amino acids (Downstream Box, DB) of the plastid atpB gene (DC40 and DC50 plants). Protein yields ranged between 0.5 and 5% of total soluble proteins (TSP). The phenotype was unaltered in all transplastomic plants, except for the DC50 line accumulating AA9 LPMO at the highest level, that showed retarded growth and a mild pale green phenotype. Oxidase activity was spectrophotometrically assayed and resulted higher for the recombinant proteins without the N-terminal fusion (DC41 and DC51), with a 3.9- and 3.4-fold increase compared to the fused proteins.

Plastid Transformation in Potato: An Important Source of Nutrition and Industrial Materials.

For a long time, plastid transformation has been a routine technology only in tobacco due to lack of effective selection and regeneration protocols, and, for some species, due to inefficient recombination using heterologous flanking regions in transformation vectors. Nevertheless, the availability of this technology to economically important crops offers new possibilities in plant breeding to manage pathogen resistance or improve nutritional value. Herein we describe an efficient plastid transformation protocol for potato (Solanum tuberosum subsp. tuberosum), achieved by the optimization of the tissue culture procedures and using transformation vectors carrying homologous potato flanking sequences. This protocol allowed to obtain up to one shoot per shot, an efficiency comparable to that usually accomplished in tobacco. Further, the method described in this chapter has been successfully used to regenerate potato transplastomic plants expressing recombinant GFP protein in chloroplasts and amyloplasts or long double-stranded RNAs for insect pest control.

Cultivated Tomato (Solanum lycopersicum L.) Suffered a Severe Cytoplasmic Bottleneck during Domestication: Implications from Chloroplast Genomes.

In various crops, genetic bottlenecks occurring through domestication can limit crop resilience to biotic and abiotic stresses. In the present study, we investigated nucleotide diversity in tomato chloroplast genome through sequencing seven plastomes of cultivated accessions from the Campania region (Southern Italy) and two wild species among the closest (Solanum pimpinellifolium) and most distantly related (S. neorickii) species to cultivated tomatoes. Comparative analyses among the chloroplast genomes sequenced in this work and those available in GenBank allowed evaluating the variability of plastomes and defining phylogenetic relationships. A dramatic reduction in genetic diversity was detected in cultivated tomatoes, nonetheless, a few de novo mutations, which still differentiated the cultivated tomatoes from the closest wild relative S. pimpinellifolium, were detected and are potentially utilizable as diagnostic markers. Phylogenetic analyses confirmed that S. pimpinellifolium is the closest ancestor of all cultivated tomatoes. Local accessions all clustered together and were strictly related with other cultivated tomatoes (S. lycopersicum group). Noteworthy, S. lycopersicum var. cerasiforme resulted in a mixture of both cultivated and wild tomato genotypes since one of the two analyzed accessions clustered with cultivated tomato, whereas the other with S. pimpinellifolium. Overall, our results revealed a very reduced cytoplasmic variability in cultivated tomatoes and suggest the occurrence of a cytoplasmic bottleneck during their domestication.

Complete Sequence, Multichromosomal Architecture and Transcriptome Analysis of the Solanum tuberosum Mitochondrial Genome.

Mitochondrial genomes (mitogenomes) in higher plants can induce cytoplasmic male sterility and be somehow involved in nuclear-cytoplasmic interactions affecting plant growth and agronomic performance. They are larger and more complex than in other eukaryotes, due to their recombinogenic nature. For most plants, the mitochondrial DNA (mtDNA) can be represented as a single circular chromosome, the so-called master molecule, which includes repeated sequences that recombine frequently, generating sub-genomic molecules in various proportions. Based on the relevance of the potato crop worldwide, herewith we report the complete mtDNA sequence of two S. tuberosum cultivars, namely Cicero and Désirée, and a comprehensive study of its expression, based on high-coverage RNA sequencing data. We found that the potato mitogenome has a multi-partite architecture, divided in at least three independent molecules that according to our data should behave as autonomous chromosomes. Inter-cultivar variability was null, while comparative analyses with other species of the Solanaceae family allowed the investigation of the evolutionary history of their mitogenomes. The RNA-seq data revealed peculiarities in transcriptional and post-transcriptional processing of mRNAs. These included co-transcription of genes with open reading frames that are probably expressed, methylation of an rRNA at a position that should impact translation efficiency and extensive RNA editing, with a high proportion of partial editing implying frequent mis-targeting by the editing machinery.

The Complete Plastome Sequences of Eleven Capsicum Genotypes: Insights into DNA Variation and Molecular Evolution.

Members of the genus Capsicum are of great economic importance, including both wild forms and cultivars of peppers and chilies. The high number of potentially informative characteristics that can be identified through next-generation sequencing technologies gave a huge boost to evolutionary and comparative genomic research in higher plants. Here, we determined the complete nucleotide sequences of the plastomes of eight Capsicum species (eleven genotypes), representing the three main taxonomic groups in the genus and estimated molecular diversity. Comparative analyses highlighted a wide spectrum of variation, ranging from point mutations to small/medium size insertions/deletions (InDels), with accD, ndhB, rpl20, ycf1, and ycf2 being the most variable genes. The global pattern of sequence variation is consistent with the phylogenetic signal. Maximum-likelihood tree estimation revealed that Capsicum chacoense is sister to the baccatum complex. Divergence and positive selection analyses unveiled that protein-coding genes were generally well conserved, but we identified 25 positive signatures distributed in six genes involved in different essential plastid functions, suggesting positive selection during evolution of Capsicum plastomes. Finally, the identified sequence variation allowed us to develop simple PCR-based markers useful in future work to discriminate species belonging to different Capsicum complexes.

Real time dynamics of ß-catenin expression during Hydra development, regeneration and Wnt signalling activation.

Understanding the dynamic cellular behaviours driving morphogenesis and regeneration is a long-standing challenge in biology. Live imaging, together with genetically encoded reporters, may provide the necessary tool to address this issue, permitting the in vivo monitoring of the spatial and temporal expression dynamics of a gene of interest during a variety of developmental processes. Canonical Wnt/ß-catenin signalling controls a plethora of cellular activities during development, regeneration and adulthood throughout the animal kingdom. Several reporters have been produced in animal models to reveal sites of active Wnt signalling. In order to monitor in vivo Wnt/ß-catenin signalling activity in the freshwater polyp Hydra vulgaris, we generated a ß-cat-eGFP transgenic Hydra, in which eGFP is driven by the Hydra ß-catenin promoter. We characterized the expression dynamics during budding, regeneration and chemical activation of the Wnt/ß-cat signalling pathway using light sheet fluorescence microscopy. Live imaging of the ß-cat-eGFP lines recapitulated the previously reported endogenous expression pattern of ß-catenin and revealed the dynamic appearance of novel sites of Wnt/ß-catenin signalling, that earlier evaded detection by mean of in situ hybridization. By combining the Wnt activity read-out efficiency of the ß-catenin promoter with advanced imaging, we have created a novel model system to monitor in real time the activity of Hydra ß-cat regulatory sequences in vivo, and open the path to reveal ß-catenin modulation in many other physiological contexts.

High-level production of single chain monellin mutants with enhanced sweetness and stability in tobacco chloroplasts.

MAIN CONCLUSION: Plastid-based MNEI protein mutants retain the structure, stability and sweetness of their bacterial counterparts, confirming the attractiveness of the plastid transformation technology for high-yield production of recombinant proteins. The prevalence of obesity and diabetes has dramatically increased the industrial demand for the development and use of alternatives to sugar and traditional sweeteners. Sweet proteins, such as MNEI, a single chain derivative of monellin, are the most promising candidates for industrial applications. In this work, we describe the use of tobacco chloroplasts as a stable plant expression platform to produce three MNEI protein mutants with improved taste profile and stability. All plant-based proteins were correctly expressed in tobacco chloroplasts, purified and subjected to in-depth chemical and sensory analyses. Recombinant MNEI mutants showed a protein yield ranging from 5% to more than 50% of total soluble proteins, which, to date, represents the highest accumulation level of MNEI mutants in plants. Comparative analyses demonstrated the high similarity, in terms of structure, stability and function, of the proteins produced in plant chloroplasts and bacteria. The high yield and the extreme sweetness perceived for the plant-derived proteins prove that plastid transformation technology is a safe, stable and cost-effective production platform for low-calorie sweeteners, with an estimated production of up to 25-30 mg of pure protein/plant.

Chloroplast proteome response to drought stress and recovery in tomato (Solanum lycopersicum L.).

BACKGROUND: Drought is a major constraint for plant growth and crop productivity that is receiving an increased attention due to global climate changes. Chloroplasts act as environmental sensors, however, only partial information is available on stress-induced mechanisms within plastids. Here, we investigated the chloroplast response to a severe drought treatment and a subsequent recovery cycle in tomato through physiological, metabolite and proteomic analyses. RESULTS: Under stress conditions, tomato plants showed stunted growth, and elevated levels of proline, abscisic acid (ABA) and late embryogenesis abundant gene transcript. Proteomics revealed that water deficit deeply affects chloroplast protein repertoire (31 differentially represented components), mainly involving energy-related functional species. Following the rewatering cycle, physiological parameters and metabolite levels indicated a recovery of tomato plant functions, while proteomics revealed a still ongoing adjustment of the chloroplast protein repertoire, which was even wider than during the drought phase (54 components differentially represented). Changes in gene expression of candidate genes and accumulation of ABA suggested the activation under stress of a specific chloroplast-to-nucleus (retrograde) signaling pathway and interconnection with the ABA-dependent network. CONCLUSIONS: Our results give an original overview on the role of chloroplast as enviromental sensor by both coordinating the expression of nuclear-encoded plastid-localised proteins and mediating plant stress response. Although our data suggest the activation of a specific retrograde signaling pathway and interconnection with ABA signaling network in tomato, the involvement and fine regulation of such pathway need to be further investigated through the development and characterization of ad hoc designed plant mutants.

High-level expression of thermostable cellulolytic enzymes in tobacco transplastomic plants and their use in hydrolysis of an industrially pretreated Arundo donax L. biomass.

BACKGROUND: Biofuels production from plant biomasses is a complex multi-step process with important economic burdens. Several biotechnological approaches have been pursued to reduce biofuels production costs. The aim of the present study was to explore the production in tobacco plastome of three genes encoding (hemi)cellulolytic enzymes from thermophilic and hyperthermophilic bacterium and Archaea, respectively, and test their application in the bioconversion of an important industrially pretreated biomass feedstock (A. donax) for production of second-generation biofuels. RESULTS: The selected enzymes, endoglucanase, endo-ß-1,4-xylanase and ß-glucosidase, were expressed in tobacco plastome with a protein yield range from 2 % to more than 75 % of total soluble proteins (TSP). The accumulation of endoglucanase (up to 2 % TSP) gave altered plant phenotypes whose severity was directly linked to the enzyme yield. The most severe seedling-lethal phenotype was due to the impairment of plastid development associated to the binding of endoglucanase protein to thylakoids. Endo-ß-1,4-xylanase and ß-glucosidase, produced at very high level without detrimental effects on plant development, were enriched (fourfold) by heat treatment (105.4 and 255.4 U/mg, respectively). Both plastid-derived biocatalysts retained the main features of the native or recombinantly expressed enzymes with interesting differences. Plastid-derived xylanase and ß-glucosidase resulted more thermophilic than the E. coli recombinant and native counterpart, respectively. Bioconversion experiments, carried out at 50 and 60 °C, demonstrated that plastid-derived enzymes were able to hydrolyse an industrially pretreated giant reed biomass. In particular, the replacement of commercial enzyme with plastid-derived xylanase, at 60 °C, produced an increase of both xylose recovery and hydrolysis rate; whereas the replacement of both xylanase and ß-glucosidase produced glucose levels similar to those observed with the commercial cocktails, and xylose yields always higher in the whole 24-72 h range. CONCLUSIONS: The very high production level of thermophilic and hyperthermophilic enzymes, their stability and bioconversion efficiencies described in this study demonstrate that plastid transformation represents a real cost-effective production platform for cellulolytic enzymes.

Plastid transformation in potato: Solanum tuberosum.

Although plastid transformation has attractive advantages and potential applications in plant biotechnology, for long time it has been highly efficient only in tobacco. The lack of efficient selection and regeneration protocols and, for some species, the inefficient recombination using heterologous flanking regions in transformation vectors prevented the extension of the technology to major crops. However, the availability of this technology for species other than tobacco could offer new possibilities in plant breeding, such as resistance management or improvement of nutritional value, with no or limited environmental concerns. Herein we describe an efficient plastid transformation protocol for potato (Solanum tuberosum subsp. tuberosum). By optimizing the tissue culture system and using transformation vectors carrying homologous potato flanking sequences, we obtained up to one transplastomic shoot per bombardment. Such efficiency is comparable to that usually achieved in tobacco. The method described in this chapter can be used to regenerate potato transplastomic plants expressing recombinant proteins in chloroplasts as well as in amyloplasts.

Virus-like particles produced in plants as potential vaccines.

Virus-like particles (VLPs) have been produced as candidate vaccines in plants virtually since the introduction of biofarming. Even today, VLPs remain the best candidates for safe, immunogenic, efficacious and inexpensive vaccines. Well-characterized human animal viruses such as HBV, HCV, HIV and HPV, rotaviruses, norovirus, foot and mouth disease viruses and even influenza virus proteins have all been successfully investigated for VLP formation. Proteins have been produced in transgenic plants and via transient expression techniques; simple structures, structures depending on more than one protein, naked and enveloped particles have all been made. There have been multiple proofs of concept, more than a few proofs of efficacy, and several products moved into human trials. This review will cover the history of VLP production in plants, and will explore a few examples in detail to illustrate the potential of such a mode of production for human and animal medicine.

Unsolved problems in plastid transformation.

Plants have been proved as a novel production platform for a wide range of biologically important compounds such as enzymes, therapeutic proteins, antibiotics, and proteins with immunological properties. In this context, plastid genetic engineering can be potentially used to produce recombinant proteins. However, several challenges still remain to be overcome if the full potential of plastid transformation technology is to be realized. They include the development of plastid transformation systems for species other than tobacco, the expression of transgenes in non-green plastids, the increase of protein accumulation and the appearance of pleiotropic effects. In this paper, we discuss the novel tools recently developed to overcome some limitations of chloroplast transformation.

Plastid transformation as an expression tool for plant-derived biopharmaceuticals.

The production of biopharmaceuticals in plants is currently one of the most attractive approaches to modern medicine. Several efficient plant-based expression systems have been developed so far. Among them, plastid transformation has attracted biotechnologists because the plastid genome, unlike nuclear genome, bears a number of unique advantages for plant genetic engineering. These include higher levels of protein production, uniform gene expression of transformants due to the lack of epigenetic interference, and expression of multiple genes (as in operons) from the same construct. Further, the plastid transformation technology is an environmentally friendly method because plastid and their genetic information are maternally inherited in many species with a consequent lack of transmission of plastid DNA by pollen. Recently, great progress has been made with plastid-based production of biopharmaceuticals demonstrating that it is a promising platform for such purposes. This chapter describes detailed protocols for plastid transformation including the delivery of DNA by biolistic method, the selection/regeneration of transplastomic plants, and the molecular analyses to select homoplasmic plants and confirm transgene expression.

Production of foreign proteins using plastid transformation.

In the past decades, the progress made in plant biotechnology has made possible the use of plants as a novel production platform for a wide range of molecules. In this context, the transformation of the plastid genome has given a huge boost to prove that plants are a promising system to produce recombinant proteins. In this review, we provide a background on plastid genetics and on the principles of this technology in higher plants. Further, we discuss the most recent biotechnological applications of plastid transformation for the production of enzymes, therapeutic proteins, antibiotics, and proteins with immunological properties. We also discuss the potential of plastid biotechnology and the novel tools developed to overcome some limitations of chloroplast transformation.

Improvement of plastid transformation efficiency in potato by using vectors with homologous flanking sequences.

Low transformation frequencies limit the use of plastid transformation in potato and other crops. Hence, a breakthrough in chloroplast genetic engineering of agronomically important species is a highly desirable goal. We succeeded in achieving potato transformation efficiency up to one shoot every bombardment using a modified regeneration procedure and novel vectors containing potato flanking sequences for transgene integration by homologous recombination in the Large Single Copy region of the plastome. Vector delivery was performed by the biolistic approach. Such efficiency corresponds to 15-18-fold improvement compared to previous results obtained in potato with a progenitor vector of that used in our study, and is comparable to that usually achieved with tobacco. The results obtained represent a significant advancement towards the implementation of the plastid transformation technology in potato breeding and biotechnology.

High efficiency plastid transformation in potato and regulation of transgene expression in leaves and tubers by alternative 5' and 3' regulatory sequences.

Transformation of potato plastids is limited by low transformation frequencies and low transgene expression in tubers. In order to improve the transformation efficiency, we modified the regeneration procedure and prepared novel vectors containing potato flanking sequences for transgene integration by homologous recombination in the Large Single Copy region of the plastome. Vector delivery was performed by the biolistic approach. By using the improved regeneration procedure and the potato flanking sequences, we regenerated about one shoot every bombardment. This efficiency corresponds to 15-18-fold improvement compared to previous results with potato and is comparable to that usually achieved with tobacco. Further, we tested five promoters and terminators, and four 5'-UTRs, to increase the expression of the gfp transgene in tubers. In leaves, accumulation of GFP to about 4% of total soluble protein (TSP) was obtained with the strong promoter of the rrn operon, a synthetic rbcL-derived 5'-UTR and the bacterial rrnB terminator. GFP protein was detected in tubers of plants transformed with only four constructs out of eleven. Best results (up to approximately 0.02% TSP) were achieved with the rrn promoter and rbcL 5'-UTR construct, described above, and another containing the same terminator, but with the promoter and 5'-UTR from the plastid clpP gene. The results obtained suggest the potential use of clpP as source of novel regulatory sequences in constructs aiming to express transgenes in amyloplasts and other non-green plastids. Furthermore, they represent a significant advancement of the plastid transformation technology in potato, of relevance to its implementation in potato breeding and biotechnology.

Plant-based anti-HIV-1 strategies: vaccine molecules and antiviral approaches.

The introduction of highly active antiretroviral therapy has drastically changed HIV infection from an acute, very deadly, to a chronic, long-lasting, mild disease. However, this requires continuous care management, which is difficult to implement worldwide, especially in developing countries. Sky-rocketing costs of HIV-positive subjects and the limited success of preventive recommendations mean that a vaccine is urgently needed, which could be the only effective strategy for the real control of the AIDS pandemic. To be effective, vaccination will need to be accessible, affordable and directed against multiple antigens. Plant-based vaccines, which are easy to produce and administer, and require no cold chain for their heat stability are, in principle, suited to such a strategy. More recently, it has been shown that even highly immunogenic, enveloped plant-based vaccines can be produced at a competitive and more efficient rate than conventional strategies. The high variability of HIV epitopes and the need to stimulate both humoral neutralizing antibodies and cellular immunity suggest the importance of using the plant system: it offers a wide range of possible strategies, from single-epitope to multicomponent vaccines, modulators of the immune response (adjuvants) and preventive molecules (microbicides), either alone or in association with plant-derived monoclonal antibodies, besides the potential use of the latter as therapeutic agents. Furthermore, plant-based anti-HIV strategies can be administered not only parenterally but also by the more convenient and safer oral route, which is a more suitable approach for possible mass vaccination.