Developing Innovative Cement Composites Containing Vine Shoot Waste and Superplasticizers.

The expansion of the construction industry requires large quantities of construction materials; therefore, the utilization of alternative raw materials that reduce the environmental impact and enhance the quality of the construction materials has received increasing interest. The comparative performance of 1% Dynamon SR3 or Dynamon SR41 superplasticizers on the properties of cement paste with 1 wt.% vine shoot waste addition (VSW) was investigated after 28 days using Fourier-transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), and solid-state 27Al and 29Si nuclear magnetic resonance (NMR) spectroscopy. VSW does not delay the formation of calcium hydroxide and C-S-H and a slight decrease of the -OH band in samples containing superplasticizers, suggesting that free lime is converted to carbonates. The highest degree of crystallinity was remarked for the samples with superplasticizers. The structure of the cement paste with VSW and superplasticizers was corroborated with mechanical properties, showing increased strength in using VSW and superplasticizers. The results showed that adding 1% VSW and superplasticizers does not change the performance of the cement paste but reduces the water-cement ratio. The combination of VSW and superplasticizers led to cement composite with improved structural and mechanical properties suitable for construction.

Structural Characterization of Several Cement-Based Materials Containing Chemical Additives with Potential Application in Additive Manufacturing.

The rapid increase in additive manufacturing applications in all industries has highlighted the lack of innovative technologies and processes in the construction industry. Several European and international policies are in place to guide the development of the technological processes involved in the construction industry toward a sustainable future. Considering the global concerns regarding this industry, the purpose of this study was to develop new cement-based materials that are capable of accelerated hydration and early strength development for use in additive manufacturing. Ca(NO3)2·4H2O, Al2(SO4)3·18H2O and Na2S2O3·5H2O were used to obtain the accelerating effect in the hydration of Portland cement. Based on results obtained from X-ray diffraction (XRD), scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM/EDX) techniques, as well as low-field nuclear magnetic resonance relaxometry (LF-NMR) techniques, it was demonstrated that all accelerators used have a quickening effect on cement hydration. The addition of Na2S2O3·5H2O or combined Na2S2O3·5H2O and Ca(NO3)2·4H2O led to obtaining new cement-based materials with early strength development and fast hydration of microorganized internal structures, critical characteristics for 3D printing.

Preparation, Characterization, and Performance of Natural Zeolites as Alternative Materials for Beer Filtration.

The clarity of the beer is essential to its marketability and good consumer approval. Moreover, the beer filtration aims to remove the unwanted constituents that cause beer haze formation. Natural zeolite, an inexpensive and widespread material, was tested as a substitute filter media for diatomaceous earth in removing the haze constituents in beer. The zeolitic tuff samples were collected from two quarries in Northern Romania: Chilioara, in which the zeolitic tuff has a clinoptilolite content of about 65%, and the Valea Pomilor quarry, containing zeolitic tuff with a clinoptilolite content of about 40%. Two-grain sizes, <40 and <100 µm, from each quarry were prepared and thermally treated at 450 °C in order to improve their adsorption properties and remove organic compounds and for physico-chemical characterization. The prepared zeolites were used for beer filtration in different mixtures with commercial filter aids (DIF BO and CBL3) in laboratory-scale experiments, and the filtered beer was characterized in terms of pH, turbidity, color, taste, flavor, and concentrations of the major and trace elements. The results showed that the taste, flavor, and pH of the filtered beer were generally not affected by filtration, while turbidity and color decreased with an increase in the zeolite content used in the filtration. The concentrations of Na and Mg in the beer were not significantly altered by filtration; Ca and K slowly increased, while Cd and Co were below the limits of quantification. Our results show that natural zeolites are promising aids for beer filtration and can be readily substituted for diatomaceous earth without significant changes in brewery industry process equipment and protocols for preparation.

High-Pressure Supercritical CO2 Pretreatment of Apple Orchard Waste for Carbohydrates Production Using Response Surface Methodology and Method Uncertainty Evaluation.

This study's objective was to separate cellulose, hemicellulose, and lignin after high-pressure supercritical carbon dioxide pretreatment for further valorization. The study investigated the supercritical carbon dioxide pretreatment of apple orchard waste at temperatures of 160-200 °C, for 15-45 min, at a pressure of 10 MPa. Response Surface Methodology (RSM) was used to optimize the supercritical process and to improve its efficiency. The change of functional groups during different pretreatment conditions was examined by Fourier transform infrared (FTIR) spectroscopy. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) confirmed the structural changes in the biomass structure before and after pretreatment. A new ultra-high performance liquid chromatography (UHPLC) coupled with an evaporative light scattering detector (ELSD) method was developed and validated for the determination of carbohydrates in the liquid fraction that resulted after pretreatment. The estimated uncertainty of the method ranged from 16.9 to 20.8%. The pre-treatment of high-pressure supercritical CO2 appears to be an effective and promising technique for the recovery of sugars and secondary by-products without the use of toxic solvents.

Simultaneous Determination of Vitamins D3 (Calcitriol, Cholecalciferol) and K2 (Menaquinone-4 and Menaquinone-7) in Dietary Supplements by UHPLC.

The content and composition of dietary supplements is of great interest due to their increasing consumption and variety of available brand offered in the market. Accurate determination of vitamins is important for the improvement of dietary supplement quality and nutrition assessments. In this regard, the simultaneous determination of vitamin D3 (calcitriol-CT and cholecalciferol-CHL) and K2 (menaquinone-4-MK-4 and menaquinone-7-MK-7) in dietary supplements was developed by using ultra-high-pressure liquid chromatography (UHPLC). The overall runtime per sample was above 35 min, with the retention times of 2.40, 6.59, 7.06, and 32.6 min for vitamin D3 (CT and CHL) and vitamin K2 (MK-4 and MK-7), respectively. The limits of detection and limits of quantification for the target nutritional compounds ranged between 0.04-0.05 µg/mL, respectively. The validation results indicated that the method had reasonable linearity (R2 ≥ 0.9990), good recovery (>82%), satisfactory intra-day precision (≤1.9%) and inter-day precision (≤3.5%), and high selectivity and specificity. The validated UHPLC method was demonstrated to be precise, accurate, and robust for the simultaneous determination of vitamins D3 (CT and CHL) and K2 (MK-4 and MK-7) in dietary supplements.

Effects of Thermal Treatment on Natural Clinoptilolite-Rich Zeolite Behavior in Simulated Biological Fluids.

This study presents the effect of thermal treatment (450, 500, 600, 750, and 800 °C) on a Romanian clinoptilolite-rich natural zeolite, along with the interaction of raw and thermally treated zeolites with simulated gastric fluid (SGF, pH = 1.20) at different zeolite to SGF ratios and exposure times. The zeolites were characterized using gravimetric analysis, X-ray fluorescence, powder X-ray diffraction (pXRD), and Fourier transform infrared (FT-IR) spectroscopy. The chemical composition of the zeolite subjected to thermal treatment did not change significantly with the increase of temperature. Structural changes were not detectable by pXRD and FT-IR analyses in the zeolites thermally treated up to 500 °C, while above 600 °C a gradual structural breakdown of zeolite was noticed. At high temperatures, the broad, low-intensity peaks in pXRD patterns indicated the partial amorphization of the crystalline structure. The pXRD and FT-IR analyses showed that the crystalline structure of zeolites remains unaffected after their exposure to SGF. The results revealed that the amounts of Fe, Na, Mg, K, Ca, Al, and Si released depends mainly on the zeolite to SGF ratio, and to a lower extent on the thermal treatment temperature, while the exposure time of 1 to 7 days does not have a significant impact on the elements released in SGF.

Bioethanol Production from Vineyard Waste by Autohydrolysis Pretreatment and Chlorite Delignification via Simultaneous Saccharification and Fermentation.

In this paper, the production of a second-generation bioethanol from lignocellulosic vineyard cutting wastes was investigated in order to define the optimal operating conditions of the autohydrolysis pretreatment, chlorite delignification and simultaneous saccharification and fermentation (SSF). The autohydrolysis of vine-shoot wastes resulted in liquors containing mainly a mixture of monosaccharides, degradation products and spent solids (rich in cellulose and lignin), with potential utility in obtaining valuable chemicals and bioethanol. The autohydrolysis of the vine-shoot wastes was carried out at 165 and 180 °C for 10 min residence time, and the resulted solid and liquid phases composition were analysed. The resulted liquid fraction contained hemicellulosic sugars as a mixture of alpha (α) and beta (ß) sugar anomers, and secondary by-products. The solid fraction was delignified using the sodium chlorite method for the separation of lignin and easier access of enzymes to the cellulosic sugars, and then, converted to ethanol by the SSF process. The maximum bioethanol production (6%) was obtained by autohydrolysis (165 °C), chlorite delignification and SSF process at 37 °C, 10% solid loading, 72 h. The principal component analysis was used to identify the main parameters that influence the chemical compositions of vine-shoot waste for different varieties.